[v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500

[v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500

[Wen He]

In order to maximise performance of the LCD Controller's 64-bit AXI
bus, for any give speed bin of the device, the AXI master interface
clock(ACLK) clock can be up to CPU_frequency/2, which is already
capable of optimal performance. In general, ACLK is always expected
to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
Main processing clock(PCLK) both are tied to the same clock as ACLK.

This change followed the LS1028A Architecture Specification Manual.

Signed-off-by: Wen He <wen.he_1@nxp.com>
---
change in v2:
        - add details commit description for this change. 
        - v1: Link: https://lore.kernel.org/patchwork/patch/1119145/

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..51fa8f57fdac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -86,20 +86,6 @@
 		clocks = <&osc_27m>;
 	};
 
-	aclk: clock-axi {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <650000000>;
-		clock-output-names= "aclk";
-	};
-
-	pclk: clock-apb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <650000000>;
-		clock-output-names= "pclk";
-	};
-
 	reboot {
 		compatible ="syscon-reboot";
 		regmap = <&dcfg>;
@@ -679,7 +665,8 @@
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "DE", "SE";
-		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
+		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
+			 <&clockgen 2 2>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
 		arm,malidp-arqos-value = <0xd000d000>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk

[Wen He]

Update DT node name clock-controller to clock-display, also change
the property #clock-cells value to zero.

This update according the feedback of the Display output interface
clock driver upstream.

Link: https://lore.kernel.org/patchwork/patch/1113832/
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 51fa8f57fdac..db1e186352d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -79,10 +79,10 @@
 		clock-output-names = "phy_27m";
 	};
 
-	dpclk: clock-controller@f1f0000 {
+	dpclk: clock-display@f1f0000 {
 		compatible = "fsl,ls1028a-plldig";
 		reg = <0x0 0xf1f0000 0x0 0xffff>;
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clocks = <&osc_27m>;
 	};
 
@@ -665,7 +665,7 @@
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "DE", "SE";
-		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
+		clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
 			 <&clockgen 2 2>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk

[Shawn Guo]

On Fri, Sep 20, 2019 at 04:34:19PM +0800, Wen He wrote:
> Update DT node name clock-controller to clock-display,

The node name clock-controller is so good, and I do not understand why
you need to change it.

Shawn

> also change
> the property #clock-cells value to zero.
> 
> This update according the feedback of the Display output interface
> clock driver upstream.
> 
> Link: https://lore.kernel.org/patchwork/patch/1113832/
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 51fa8f57fdac..db1e186352d8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -79,10 +79,10 @@
>  		clock-output-names = "phy_27m";
>  	};
>  
> -	dpclk: clock-controller@f1f0000 {
> +	dpclk: clock-display@f1f0000 {
>  		compatible = "fsl,ls1028a-plldig";
>  		reg = <0x0 0xf1f0000 0x0 0xffff>;
> -		#clock-cells = <1>;
> +		#clock-cells = <0>;
>  		clocks = <&osc_27m>;
>  	};
>  
> @@ -665,7 +665,7 @@
>  		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
>  			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
>  		interrupt-names = "DE", "SE";
> -		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
> +		clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
>  			 <&clockgen 2 2>;
>  		clock-names = "pxlclk", "mclk", "aclk", "pclk";
>  		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk

[Wen He]

> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2019年10月7日 20:35
> To: Wen He <wen.he_1@nxp.com>
> Cc: linux-devel@linux.nxdi.nxp.com; Leo Li <leoyang.li@nxp.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org
> Subject: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition
> for dpclk
> 
> 
> On Fri, Sep 20, 2019 at 04:34:19PM +0800, Wen He wrote:
> > Update DT node name clock-controller to clock-display,
> 
> The node name clock-controller is so good, and I do not understand why you
> need to change it.
> 

The node name clock-controller used for the system clockgen and this clock only used for
the Display core. 
To clearly the node, that why I have to use clock-display to instead of the clock-controller

Best Regards,
Wen

> Shawn
> 
> > also change
> > the property #clock-cells value to zero.
> >
> > This update according the feedback of the Display output interface
> > clock driver upstream.
> >
> > Link:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore
> > .kernel.org%2Fpatchwork%2Fpatch%2F1113832%2F&amp;data=02%7C01%
> 7Cwen.he
> >
> _1%40nxp.com%7C61934346fa6646d28bac08d74b22e08c%7C686ea1d3bc2b
> 4c6fa92c
> >
> d99c5c301635%7C0%7C0%7C637060485478218390&amp;sdata=%2FLG2KvA
> LdOGp6T06
> > 2fuKGQXYegswsEOWPAvzWnLkftM%3D&amp;reserved=0
> > Signed-off-by: Wen He <wen.he_1@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index 51fa8f57fdac..db1e186352d8 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -79,10 +79,10 @@
> >               clock-output-names = "phy_27m";
> >       };
> >
> > -     dpclk: clock-controller@f1f0000 {
> > +     dpclk: clock-display@f1f0000 {
> >               compatible = "fsl,ls1028a-plldig";
> >               reg = <0x0 0xf1f0000 0x0 0xffff>;
> > -             #clock-cells = <1>;
> > +             #clock-cells = <0>;
> >               clocks = <&osc_27m>;
> >       };
> >
> > @@ -665,7 +665,7 @@
> >               interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> >                            <0 223 IRQ_TYPE_LEVEL_HIGH>;
> >               interrupt-names = "DE", "SE";
> > -             clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
> > +             clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
> >                        <&clockgen 2 2>;
> >               clock-names = "pxlclk", "mclk", "aclk", "pclk";
> >               arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> > --
> > 2.17.1
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk

[Shawn Guo]

On Tue, Oct 08, 2019 at 04:08:57AM +0000, Wen He wrote:
> 
> 
> > -----Original Message-----
> > From: Shawn Guo <shawnguo@kernel.org>
> > Sent: 2019年10月7日 20:35
> > To: Wen He <wen.he_1@nxp.com>
> > Cc: linux-devel@linux.nxdi.nxp.com; Leo Li <leoyang.li@nxp.com>; Rob Herring
> > <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org
> > Subject: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition
> > for dpclk
> > 
> > 
> > On Fri, Sep 20, 2019 at 04:34:19PM +0800, Wen He wrote:
> > > Update DT node name clock-controller to clock-display,
> > 
> > The node name clock-controller is so good, and I do not understand why you
> > need to change it.
> > 
> 
> The node name clock-controller used for the system clockgen and this clock only used for
> the Display core. 
> To clearly the node, that why I have to use clock-display to instead of the clock-controller

Label is being used to specify things, and node name should just be as
generic as possible.

Shawn

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk

[Wen He]

> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2019年10月14日 14:22
> To: Wen He <wen.he_1@nxp.com>
> Cc: linux-devel@linux.nxdi.nxp.com; Leo Li <leoyang.li@nxp.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org
> Subject: Re: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node
> definition for dpclk
> 
> Caution: EXT Email
> 
> On Tue, Oct 08, 2019 at 04:08:57AM +0000, Wen He wrote:
> >
> >
> > > -----Original Message-----
> > > From: Shawn Guo <shawnguo@kernel.org>
> > > Sent: 2019年10月7日 20:35
> > > To: Wen He <wen.he_1@nxp.com>
> > > Cc: linux-devel@linux.nxdi.nxp.com; Leo Li <leoyang.li@nxp.com>; Rob
> > > Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > linux-arm-kernel@lists.infradead.org
> > > Subject: [EXT] Re: [v2 2/2] arm64: dts: ls1028a: Update the DT node
> > > definition for dpclk
> > >
> > >
> > > On Fri, Sep 20, 2019 at 04:34:19PM +0800, Wen He wrote:
> > > > Update DT node name clock-controller to clock-display,
> > >
> > > The node name clock-controller is so good, and I do not understand
> > > why you need to change it.
> > >
> >
> > The node name clock-controller used for the system clockgen and this
> > clock only used for the Display core.
> > To clearly the node, that why I have to use clock-display to instead
> > of the clock-controller
> 
> Label is being used to specify things, and node name should just be as generic
> as possible.

Understand, will correction it.

Thanks && Best Regards,
Wen

> 
> Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500

[Shawn Guo]

On Fri, Sep 20, 2019 at 04:34:18PM +0800, Wen He wrote:
> In order to maximise performance of the LCD Controller's 64-bit AXI
> bus, for any give speed bin of the device, the AXI master interface
> clock(ACLK) clock can be up to CPU_frequency/2, which is already
> capable of optimal performance. In general, ACLK is always expected
> to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
> Main processing clock(PCLK) both are tied to the same clock as ACLK.
> 
> This change followed the LS1028A Architecture Specification Manual.
> 
> Signed-off-by: Wen He <wen.he_1@nxp.com>

@Leo, agree?

Shawn

> ---
> change in v2:
>         - add details commit description for this change. 
>         - v1: Link: https://lore.kernel.org/patchwork/patch/1119145/
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++---------------
>  1 file changed, 2 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 72b9a75976a1..51fa8f57fdac 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -86,20 +86,6 @@
>  		clocks = <&osc_27m>;
>  	};
>  
> -	aclk: clock-axi {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		clock-frequency = <650000000>;
> -		clock-output-names= "aclk";
> -	};
> -
> -	pclk: clock-apb {
> -		compatible = "fixed-clock";
> -		#clock-cells = <0>;
> -		clock-frequency = <650000000>;
> -		clock-output-names= "pclk";
> -	};
> -
>  	reboot {
>  		compatible ="syscon-reboot";
>  		regmap = <&dcfg>;
> @@ -679,7 +665,8 @@
>  		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
>  			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
>  		interrupt-names = "DE", "SE";
> -		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
> +		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
> +			 <&clockgen 2 2>;
>  		clock-names = "pxlclk", "mclk", "aclk", "pclk";
>  		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
>  		arm,malidp-arqos-value = <0xd000d000>;
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500

[Leo Li]

> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: Monday, October 7, 2019 7:32 AM
> To: Wen He <wen.he_1@nxp.com>
> Cc: linux-devel@linux.nxdi.nxp.com; Leo Li <leoyang.li@nxp.com>; Rob
> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the
> Mali DP500
> 
> On Fri, Sep 20, 2019 at 04:34:18PM +0800, Wen He wrote:
> > In order to maximise performance of the LCD Controller's 64-bit AXI
> > bus, for any give speed bin of the device, the AXI master interface
> > clock(ACLK) clock can be up to CPU_frequency/2, which is already
> > capable of optimal performance. In general, ACLK is always expected to
> > be equal to CPU_frequency/2. APB slave interface clock(PCLK) and Main
> > processing clock(PCLK) both are tied to the same clock as ACLK.
> >
> > This change followed the LS1028A Architecture Specification Manual.
> >
> > Signed-off-by: Wen He <wen.he_1@nxp.com>
> 
> @Leo, agree?

Yes.

Acked-by: Li Yang <leoyang.li@nxp.com>

> 
> Shawn
> 
> > ---
> > change in v2:
> >         - add details commit description for this change.
> >         - v1: Link:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore
> > .kernel.org%2Fpatchwork%2Fpatch%2F1119145%2F&amp;data=02%7C01%
> 7Cleoyan
> >
> g.li%40nxp.com%7C628134d8d86548af60ab08d74b227a54%7C686ea1d3bc2b4
> c6fa9
> >
> 2cd99c5c301635%7C0%7C0%7C637060483779667257&amp;sdata=vX2DqsXlKE
> SqesXy
> > LwTqnBFt0GftY0XNphkmx5dR7vA%3D&amp;reserved=0
> >
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++---------------
> >  1 file changed, 2 insertions(+), 15 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index 72b9a75976a1..51fa8f57fdac 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -86,20 +86,6 @@
> >  		clocks = <&osc_27m>;
> >  	};
> >
> > -	aclk: clock-axi {
> > -		compatible = "fixed-clock";
> > -		#clock-cells = <0>;
> > -		clock-frequency = <650000000>;
> > -		clock-output-names= "aclk";
> > -	};
> > -
> > -	pclk: clock-apb {
> > -		compatible = "fixed-clock";
> > -		#clock-cells = <0>;
> > -		clock-frequency = <650000000>;
> > -		clock-output-names= "pclk";
> > -	};
> > -
> >  	reboot {
> >  		compatible ="syscon-reboot";
> >  		regmap = <&dcfg>;
> > @@ -679,7 +665,8 @@
> >  		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> >  			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
> >  		interrupt-names = "DE", "SE";
> > -		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
> > +		clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
> > +			 <&clockgen 2 2>;
> >  		clock-names = "pxlclk", "mclk", "aclk", "pclk";
> >  		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> >  		arm,malidp-arqos-value = <0xd000d000>;
> > --
> > 2.17.1
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500

[Shawn Guo]

On Fri, Sep 20, 2019 at 04:34:18PM +0800, Wen He wrote:
> In order to maximise performance of the LCD Controller's 64-bit AXI
> bus, for any give speed bin of the device, the AXI master interface
> clock(ACLK) clock can be up to CPU_frequency/2, which is already
> capable of optimal performance. In general, ACLK is always expected
> to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
> Main processing clock(PCLK) both are tied to the same clock as ACLK.
> 
> This change followed the LS1028A Architecture Specification Manual.
> 
> Signed-off-by: Wen He <wen.he_1@nxp.com>

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel