[PATCH v8 00/14] Mediatek MT8183 scpsys support

[PATCH v8 00/14] Mediatek MT8183 scpsys support

[Weiyi Lu]

This series is based on v5.4-rc1

changes since v7:
- reword in binding document [PATCH 02/14]
- fix error return checking bug in subsys clock control [PATCH 10/14]
- add power domains properity to mfgcfg patch [PATCH 14/14] from
  https://patchwork.kernel.org/patch/11126199/

changes since v6:
- remove the patch of SPDX license identifier because it's already fixed

changes since v5:
- fix documentation in [PATCH 04/14]
- remove useless variable checking and reuse API of clock control in [PATCH 06/14]
- coding style fix of bus protection control in [PATCH 08/14]
- fix naming of new added data in [PATCH 09/14]
- small refactor of multiple step bus protection control in [PATCH 10/14]

changes since v4:
- add property to mt8183 smi-common
- seperate refactor patches and new add function
- add power controller device node

Weiyi Lu (14):
  dt-bindings: mediatek: Add property to mt8183 smi-common
  dt-bindings: soc: Add MT8183 power dt-bindings
  soc: mediatek: Refactor polling timeout and documentation
  soc: mediatek: Refactor regulator control
  soc: mediatek: Refactor clock control
  soc: mediatek: Refactor sram control
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Add basic_clk_id to scp_power_data
  soc: mediatek: Add multiple step bus protection control
  soc: mediatek: Add subsys clock control for bus protection
  soc: mediatek: Add extra sram control
  soc: mediatek: Add MT8183 scpsys support
  arm64: dts: Add power controller device node of MT8183
  arm64: dts: Add power-domains properity to mfgcfg

 .../memory-controllers/mediatek,smi-common.txt     |   2 +-
 .../devicetree/bindings/soc/mediatek/scpsys.txt    |  20 +-
 arch/arm64/boot/dts/mediatek/mt8183.dtsi           |  63 +++
 drivers/soc/mediatek/Makefile                      |   2 +-
 drivers/soc/mediatek/mtk-scpsys-ext.c              |  99 ++++
 drivers/soc/mediatek/mtk-scpsys.c                  | 575 ++++++++++++++++++---
 include/dt-bindings/power/mt8183-power.h           |  26 +
 include/linux/soc/mediatek/scpsys-ext.h            |  39 ++
 8 files changed, 745 insertions(+), 81 deletions(-)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c
 create mode 100644 include/dt-bindings/power/mt8183-power.h
 create mode 100644 include/linux/soc/mediatek/scpsys-ext.h


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 01/14] dt-bindings: mediatek: Add property to mt8183 smi-common

[Weiyi Lu]

For scpsys driver using regmap based syscon driver API.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 .../devicetree/bindings/memory-controllers/mediatek,smi-common.txt      | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index b478ade..01744ec 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -20,7 +20,7 @@ Required properties:
 	"mediatek,mt2712-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
 	"mediatek,mt8173-smi-common"
-	"mediatek,mt8183-smi-common"
+	"mediatek,mt8183-smi-common", "syscon"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
 - clocks : Must contain an entry for each entry in clock-names.
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 02/14] dt-bindings: soc: Add MT8183 power dt-bindings

[Weiyi Lu]

Add power dt-bindings of MT8183 and introduces "BASIC" and
"SUBSYS" clock types in binding document.
The "BASIC" type is compatible to the original power control with
clock name [a-z]+[0-9]*, e.g. mm, vpu1.
The "SUBSYS" type is used for bus protection control with clock
name [a-z]+-[0-9]+, e.g. isp-0, cam-1.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 .../devicetree/bindings/soc/mediatek/scpsys.txt    | 20 ++++++++++++++---
 include/dt-bindings/power/mt8183-power.h           | 26 ++++++++++++++++++++++
 2 files changed, 43 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/power/mt8183-power.h

diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index 876693a..ee9df27 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -14,6 +14,7 @@ power/power_domain.txt. It provides the power domains defined in
 - include/dt-bindings/power/mt2701-power.h
 - include/dt-bindings/power/mt2712-power.h
 - include/dt-bindings/power/mt7622-power.h
+- include/dt-bindings/power/mt8183-power.h
 
 Required properties:
 - compatible: Should be one of:
@@ -25,18 +26,31 @@ Required properties:
 	- "mediatek,mt7623a-scpsys": For MT7623A SoC
 	- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
 	- "mediatek,mt8173-scpsys"
+	- "mediatek,mt8183-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
 - infracfg: must contain a phandle to the infracfg controller
-- clock, clock-names: clocks according to the common clock binding.
-                      These are clocks which hardware needs to be
-                      enabled before enabling certain power domains.
+- clock, clock-names: Clocks according to the common clock binding.
+                      Some SoCs have to groups of clocks.
+                      BASIC clocks need to be enabled before enabling the
+                      corresponding power domain.
+                      SUBSYS clocks need to be enabled before releasing the
+                      bus protection.
 	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
 	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
 	Required clocks for MT6797: "mm", "mfg", "vdec"
 	Required clocks for MT7622 or MT7629: "hif_sel"
 	Required clocks for MT7623A: "ethif"
 	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
+	Required clocks for MT8183: BASIC: "audio", "mfg", "mm", "cam", "isp",
+					   "vpu", "vpu1", "vpu2", "vpu3"
+				    SUBSYS: "mm-0", "mm-1", "mm-2", "mm-3",
+					    "mm-4", "mm-5", "mm-6", "mm-7",
+					    "mm-8", "mm-9", "isp-0", "isp-1",
+					    "cam-0", "cam-1", "cam-2", "cam-3",
+					    "cam-4", "cam-5", "cam-6", "vpu-0",
+					    "vpu-1", "vpu-2", "vpu-3", "vpu-4",
+					    "vpu-5"
 
 Optional properties:
 - vdec-supply: Power supply for the vdec power domain
diff --git a/include/dt-bindings/power/mt8183-power.h b/include/dt-bindings/power/mt8183-power.h
new file mode 100644
index 0000000..5c0c8c7
--- /dev/null
+++ b/include/dt-bindings/power/mt8183-power.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8183_POWER_DOMAIN_AUDIO	0
+#define MT8183_POWER_DOMAIN_CONN	1
+#define MT8183_POWER_DOMAIN_MFG_ASYNC	2
+#define MT8183_POWER_DOMAIN_MFG		3
+#define MT8183_POWER_DOMAIN_MFG_CORE0	4
+#define MT8183_POWER_DOMAIN_MFG_CORE1	5
+#define MT8183_POWER_DOMAIN_MFG_2D	6
+#define MT8183_POWER_DOMAIN_DISP	7
+#define MT8183_POWER_DOMAIN_CAM		8
+#define MT8183_POWER_DOMAIN_ISP		9
+#define MT8183_POWER_DOMAIN_VDEC	10
+#define MT8183_POWER_DOMAIN_VENC	11
+#define MT8183_POWER_DOMAIN_VPU_TOP	12
+#define MT8183_POWER_DOMAIN_VPU_CORE0	13
+#define MT8183_POWER_DOMAIN_VPU_CORE1	14
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 03/14] soc: mediatek: Refactor polling timeout and documentation

[Weiyi Lu]

Use USEC_PER_SEC to indicate the polling timeout directly.
And add documentation of scp_domain_data.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 503222d..e97fc0e 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -21,7 +21,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 
 #define MTK_POLL_DELAY_US   10
-#define MTK_POLL_TIMEOUT    (jiffies_to_usecs(HZ))
+#define MTK_POLL_TIMEOUT    USEC_PER_SEC
 
 #define MTK_SCPD_ACTIVE_WAKEUP		BIT(0)
 #define MTK_SCPD_FWAIT_SRAM		BIT(1)
@@ -108,6 +108,17 @@ enum clk_id {
 
 #define MAX_CLKS	3
 
+/**
+ * struct scp_domain_data - scp domain data for power on/off flow
+ * @name: The domain name.
+ * @sta_mask: The mask for power on/off status bit.
+ * @ctl_offs: The offset for main power control register.
+ * @sram_pdn_bits: The mask for sram power control bits.
+ * @sram_pdn_ack_bits: The mask for sram power control acked bits.
+ * @bus_prot_mask: The mask for single step bus protection.
+ * @clk_id: The basic clocks required by this power domain.
+ * @caps: The flag for active wake-up action.
+ */
 struct scp_domain_data {
 	const char *name;
 	u32 sta_mask;
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 04/14] soc: mediatek: Refactor regulator control

[Weiyi Lu]

Put regulator enable and disable control in separate functions.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index e97fc0e..aed540d 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -191,6 +191,22 @@ static int scpsys_domain_is_on(struct scp_domain *scpd)
 	return -EINVAL;
 }
 
+static int scpsys_regulator_enable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_enable(scpd->supply);
+}
+
+static int scpsys_regulator_disable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_disable(scpd->supply);
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -201,11 +217,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	int ret, tmp;
 	int i;
 
-	if (scpd->supply) {
-		ret = regulator_enable(scpd->supply);
-		if (ret)
-			return ret;
-	}
+	ret = scpsys_regulator_enable(scpd);
+	if (ret < 0)
+		return ret;
 
 	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
 		ret = clk_prepare_enable(scpd->clk[i]);
@@ -273,8 +287,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 			clk_disable_unprepare(scpd->clk[i]);
 	}
 err_clk:
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	scpsys_regulator_disable(scpd);
 
 	dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name);
 
@@ -333,8 +346,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
 		clk_disable_unprepare(scpd->clk[i]);
 
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	ret = scpsys_regulator_disable(scpd);
+	if (ret < 0)
+		goto out;
 
 	return 0;
 
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 05/14] soc: mediatek: Refactor clock control

[Weiyi Lu]

Put clock enable and disable control in separate function.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 45 ++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 17 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index aed540d..73e4a1a 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -207,6 +207,29 @@ static int scpsys_regulator_disable(struct scp_domain *scpd)
 	return regulator_disable(scpd->supply);
 }
 
+static void scpsys_clk_disable(struct clk *clk[], int max_num)
+{
+	int i;
+
+	for (i = max_num - 1; i >= 0; i--)
+		clk_disable_unprepare(clk[i]);
+}
+
+static int scpsys_clk_enable(struct clk *clk[], int max_num)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < max_num && clk[i]; i++) {
+		ret = clk_prepare_enable(clk[i]);
+		if (ret) {
+			scpsys_clk_disable(clk, i);
+			break;
+		}
+	}
+
+	return ret;
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -215,21 +238,14 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
 
 	ret = scpsys_regulator_enable(scpd);
 	if (ret < 0)
 		return ret;
 
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
-		ret = clk_prepare_enable(scpd->clk[i]);
-		if (ret) {
-			for (--i; i >= 0; i--)
-				clk_disable_unprepare(scpd->clk[i]);
-
-			goto err_clk;
-		}
-	}
+	ret = scpsys_clk_enable(scpd->clk, MAX_CLKS);
+	if (ret)
+		goto err_clk;
 
 	val = readl(ctl_addr);
 	val |= PWR_ON_BIT;
@@ -282,10 +298,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	return 0;
 
 err_pwr_ack:
-	for (i = MAX_CLKS - 1; i >= 0; i--) {
-		if (scpd->clk[i])
-			clk_disable_unprepare(scpd->clk[i]);
-	}
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
 	scpsys_regulator_disable(scpd);
 
@@ -302,7 +315,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
 
 	if (scpd->data->bus_prot_mask) {
 		ret = mtk_infracfg_set_bus_protection(scp->infracfg,
@@ -343,8 +355,7 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
-		clk_disable_unprepare(scpd->clk[i]);
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 
 	ret = scpsys_regulator_disable(scpd);
 	if (ret < 0)
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 06/14] soc: mediatek: Refactor sram control

[Weiyi Lu]

Put sram enable and disable control in separate functions.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
---
 drivers/soc/mediatek/mtk-scpsys.c | 79 +++++++++++++++++++++++++--------------
 1 file changed, 51 insertions(+), 28 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 73e4a1a..ad0f619 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -230,12 +230,55 @@ static int scpsys_clk_enable(struct clk *clk[], int max_num)
 	return ret;
 }
 
+static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	val = readl(ctl_addr) & ~scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
+	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
+		/*
+		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
+		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup
+		 * is applied here.
+		 */
+		usleep_range(12000, 12100);
+	} else {
+		/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+		int ret = readl_poll_timeout(ctl_addr, tmp,
+				(tmp & pdn_ack) == 0,
+				MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+	return readl_poll_timeout(ctl_addr, tmp,
+			(tmp & pdn_ack) == pdn_ack,
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
 
@@ -247,6 +290,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	if (ret)
 		goto err_clk;
 
+	/* subsys power on */
 	val = readl(ctl_addr);
 	val |= PWR_ON_BIT;
 	writel(val, ctl_addr);
@@ -268,24 +312,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	val &= ~scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
-
-	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
-	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
-		/*
-		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
-		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is
-		 * applied here.
-		 */
-		usleep_range(12000, 12100);
-
-	} else {
-		ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
-					 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
-		if (ret < 0)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_pwr_ack;
 
 	if (scpd->data->bus_prot_mask) {
 		ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
@@ -312,7 +341,6 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
 
@@ -324,17 +352,12 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 			goto out;
 	}
 
-	val = readl(ctl_addr);
-	val |= scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
-
-	/* wait until SRAM_PDN_ACK all 1 */
-	ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack,
-				 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+	ret = scpsys_sram_disable(scpd, ctl_addr);
 	if (ret < 0)
 		goto out;
 
-	val |= PWR_ISO_BIT;
+	/* subsys power off */
+	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
 
 	val &= ~PWR_RST_B_BIT;
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 07/14] soc: mediatek: Refactor bus protection control

[Weiyi Lu]

Put bus protection enable and disable control in separate functions.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 44 ++++++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ad0f619..fb2b027 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -274,6 +274,30 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
 			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
 }
 
+static int scpsys_bus_protect_enable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+
+	if (!scpd->data->bus_prot_mask)
+		return 0;
+
+	return mtk_infracfg_set_bus_protection(scp->infracfg,
+			scpd->data->bus_prot_mask,
+			scp->bus_prot_reg_update);
+}
+
+static int scpsys_bus_protect_disable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+
+	if (!scpd->data->bus_prot_mask)
+		return 0;
+
+	return mtk_infracfg_clear_bus_protection(scp->infracfg,
+			scpd->data->bus_prot_mask,
+			scp->bus_prot_reg_update);
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
@@ -316,13 +340,9 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto err_pwr_ack;
 
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_bus_protect_disable(scpd);
+	if (ret < 0)
+		goto err_pwr_ack;
 
 	return 0;
 
@@ -344,13 +364,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	u32 val;
 	int ret, tmp;
 
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_set_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto out;
-	}
+	ret = scpsys_bus_protect_enable(scpd);
+	if (ret < 0)
+		goto out;
 
 	ret = scpsys_sram_disable(scpd, ctl_addr);
 	if (ret < 0)
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 08/14] soc: mediatek: Add basic_clk_id to scp_power_data

[Weiyi Lu]

Try to stop extending the clk_id or clk_names if there are
more and more new BASIC clocks. To get its own clocks by the
basic_clk_id of each power domain.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index fb2b027..d31e1a4 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -117,6 +117,8 @@ enum clk_id {
  * @sram_pdn_ack_bits: The mask for sram power control acked bits.
  * @bus_prot_mask: The mask for single step bus protection.
  * @clk_id: The basic clocks required by this power domain.
+ * @basic_clk_id: provide the same purpose with field "clk_id"
+ *                by declaring basic clock prefix name rather than clk_id.
  * @caps: The flag for active wake-up action.
  */
 struct scp_domain_data {
@@ -127,6 +129,7 @@ struct scp_domain_data {
 	u32 sram_pdn_ack_bits;
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
+	const char *basic_clk_id[MAX_CLKS];
 	u8 caps;
 };
 
@@ -490,16 +493,26 @@ static struct scp *init_scp(struct platform_device *pdev,
 
 		scpd->data = data;
 
-		for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
-			struct clk *c = clk[data->clk_id[j]];
+		if (data->clk_id[0]) {
+			WARN_ON(data->basic_clk_id[0]);
 
-			if (IS_ERR(c)) {
-				dev_err(&pdev->dev, "%s: clk unavailable\n",
-					data->name);
-				return ERR_CAST(c);
-			}
+			for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
+				struct clk *c = clk[data->clk_id[j]];
+
+				if (IS_ERR(c)) {
+					dev_err(&pdev->dev,
+						"%s: clk unavailable\n",
+						data->name);
+					return ERR_CAST(c);
+				}
 
-			scpd->clk[j] = c;
+				scpd->clk[j] = c;
+			}
+		} else if (data->basic_clk_id[0]) {
+			for (j = 0; j < MAX_CLKS &&
+					data->basic_clk_id[j]; j++)
+				scpd->clk[j] = devm_clk_get(&pdev->dev,
+						data->basic_clk_id[j]);
 		}
 
 		genpd->name = data->name;
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 09/14] soc: mediatek: Add multiple step bus protection control

[Weiyi Lu]

Both MT8183 & MT6765 have more control steps of bus protection
than previous project. And there add more bus protection registers
reside at infracfg & smi-common. Also add new APIs for multiple
step bus protection control with more customized arguments.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/Makefile           |  2 +-
 drivers/soc/mediatek/mtk-scpsys-ext.c   | 99 +++++++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-scpsys.c       | 39 +++++++++----
 include/linux/soc/mediatek/scpsys-ext.h | 39 +++++++++++++
 4 files changed, 168 insertions(+), 11 deletions(-)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c
 create mode 100644 include/linux/soc/mediatek/scpsys-ext.h

diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index b017330..b442be9 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
-obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
+obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
 obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-scpsys-ext.c b/drivers/soc/mediatek/mtk-scpsys-ext.c
new file mode 100644
index 0000000..b24321e
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-scpsys-ext.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <Owen.Chen@mediatek.com>
+ */
+#include <linux/ktime.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/soc/mediatek/scpsys-ext.h>
+
+#define MTK_POLL_DELAY_US   10
+#define MTK_POLL_TIMEOUT    USEC_PER_SEC
+
+static int set_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
+		u32 reg_set, u32 reg_sta, u32 reg_en)
+{
+	u32 val;
+
+	if (reg_set)
+		regmap_write(map, reg_set, mask);
+	else
+		regmap_update_bits(map, reg_en, mask, mask);
+
+	return regmap_read_poll_timeout(map, reg_sta,
+			val, (val & ack_mask) == ack_mask,
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+static int clear_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
+		u32 reg_clr, u32 reg_sta, u32 reg_en)
+{
+	u32 val;
+
+	if (reg_clr)
+		regmap_write(map, reg_clr, mask);
+	else
+		regmap_update_bits(map, reg_en, mask, 0);
+
+	return regmap_read_poll_timeout(map, reg_sta,
+			val, !(val & ack_mask),
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common)
+{
+	int i;
+
+	for (i = 0; i < MAX_STEPS; i++) {
+		struct regmap *map;
+		int ret;
+
+		if (bp_table[i].type == INVALID_TYPE)
+			continue;
+		else if (bp_table[i].type == IFR_TYPE)
+			map = infracfg;
+		else if (bp_table[i].type == SMI_TYPE)
+			map = smi_common;
+
+		ret = set_bus_protection(map,
+				bp_table[i].mask, bp_table[i].mask,
+				bp_table[i].set_ofs, bp_table[i].sta_ofs,
+				bp_table[i].en_ofs);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common)
+{
+	int i;
+
+	for (i = MAX_STEPS - 1; i >= 0; i--) {
+		struct regmap *map;
+		int ret;
+
+		if (bp_table[i].type == INVALID_TYPE)
+			continue;
+		else if (bp_table[i].type == IFR_TYPE)
+			map = infracfg;
+		else if (bp_table[i].type == SMI_TYPE)
+			map = smi_common;
+
+		ret = clear_bus_protection(map,
+				bp_table[i].mask, bp_table[i].clr_ack_mask,
+				bp_table[i].clr_ofs, bp_table[i].sta_ofs,
+				bp_table[i].en_ofs);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index d31e1a4..f25101f 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -12,6 +12,7 @@
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>
 #include <linux/soc/mediatek/infracfg.h>
+#include <linux/soc/mediatek/scpsys-ext.h>
 
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/power/mt2712-power.h>
@@ -120,6 +121,7 @@ enum clk_id {
  * @basic_clk_id: provide the same purpose with field "clk_id"
  *                by declaring basic clock prefix name rather than clk_id.
  * @caps: The flag for active wake-up action.
+ * @bp_table: The mask table for multiple step bus protection.
  */
 struct scp_domain_data {
 	const char *name;
@@ -131,6 +133,7 @@ struct scp_domain_data {
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_id[MAX_CLKS];
 	u8 caps;
+	struct bus_prot bp_table[MAX_STEPS];
 };
 
 struct scp;
@@ -154,6 +157,7 @@ struct scp {
 	struct device *dev;
 	void __iomem *base;
 	struct regmap *infracfg;
+	struct regmap *smi_common;
 	struct scp_ctrl_reg ctrl_reg;
 	bool bus_prot_reg_update;
 };
@@ -281,24 +285,28 @@ static int scpsys_bus_protect_enable(struct scp_domain *scpd)
 {
 	struct scp *scp = scpd->scp;
 
-	if (!scpd->data->bus_prot_mask)
-		return 0;
+	if (scpd->data->bus_prot_mask) {
+		return mtk_infracfg_set_bus_protection(scp->infracfg,
+				scpd->data->bus_prot_mask,
+				scp->bus_prot_reg_update);
+	}
 
-	return mtk_infracfg_set_bus_protection(scp->infracfg,
-			scpd->data->bus_prot_mask,
-			scp->bus_prot_reg_update);
+	return mtk_scpsys_ext_set_bus_protection(scpd->data->bp_table,
+			scp->infracfg, scp->smi_common);
 }
 
 static int scpsys_bus_protect_disable(struct scp_domain *scpd)
 {
 	struct scp *scp = scpd->scp;
 
-	if (!scpd->data->bus_prot_mask)
-		return 0;
+	if (scpd->data->bus_prot_mask) {
+		return mtk_infracfg_clear_bus_protection(scp->infracfg,
+				scpd->data->bus_prot_mask,
+				scp->bus_prot_reg_update);
+	}
 
-	return mtk_infracfg_clear_bus_protection(scp->infracfg,
-			scpd->data->bus_prot_mask,
-			scp->bus_prot_reg_update);
+	return mtk_scpsys_ext_clear_bus_protection(scpd->data->bp_table,
+			scp->infracfg, scp->smi_common);
 }
 
 static int scpsys_power_on(struct generic_pm_domain *genpd)
@@ -466,6 +474,17 @@ static struct scp *init_scp(struct platform_device *pdev,
 		return ERR_CAST(scp->infracfg);
 	}
 
+	scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+			"smi_comm");
+
+	if (scp->smi_common == ERR_PTR(-ENODEV)) {
+		scp->smi_common = NULL;
+	} else if (IS_ERR(scp->smi_common)) {
+		dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n",
+				PTR_ERR(scp->smi_common));
+		return ERR_CAST(scp->smi_common);
+	}
+
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];
 		const struct scp_domain_data *data = &scp_domain_data[i];
diff --git a/include/linux/soc/mediatek/scpsys-ext.h b/include/linux/soc/mediatek/scpsys-ext.h
new file mode 100644
index 0000000..3e5b84d
--- /dev/null
+++ b/include/linux/soc/mediatek/scpsys-ext.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H
+#define __SOC_MEDIATEK_SCPSYS_EXT_H
+
+#define MAX_STEPS	4
+
+#define BUS_PROT(_type, _set_ofs, _clr_ofs,			\
+		_en_ofs, _sta_ofs, _mask, _clr_ack_mask) {	\
+		.type = _type,					\
+		.set_ofs = _set_ofs,				\
+		.clr_ofs = _clr_ofs,				\
+		.en_ofs = _en_ofs,				\
+		.sta_ofs = _sta_ofs,				\
+		.mask = _mask,					\
+		.clr_ack_mask = _clr_ack_mask,			\
+	}
+
+enum regmap_type {
+	INVALID_TYPE = 0,
+	IFR_TYPE,
+	SMI_TYPE,
+};
+
+struct bus_prot {
+	enum regmap_type type;
+	u32 set_ofs;
+	u32 clr_ofs;
+	u32 en_ofs;
+	u32 sta_ofs;
+	u32 mask;
+	u32 clr_ack_mask;
+};
+
+int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common);
+int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common);
+
+#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 10/14] soc: mediatek: Add subsys clock control for bus protection

[Weiyi Lu]

Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 72 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index f25101f..0b5055c 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ enum clk_id {
 };
 
 #define MAX_CLKS	3
+#define MAX_SUBSYS_CLKS 10
 
 /**
  * struct scp_domain_data - scp domain data for power on/off flow
@@ -120,6 +121,8 @@ enum clk_id {
  * @clk_id: The basic clocks required by this power domain.
  * @basic_clk_id: provide the same purpose with field "clk_id"
  *                by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
  * @caps: The flag for active wake-up action.
  * @bp_table: The mask table for multiple step bus protection.
  */
@@ -132,6 +135,7 @@ struct scp_domain_data {
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_id[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
 	struct bus_prot bp_table[MAX_STEPS];
 };
@@ -142,6 +146,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -347,16 +352,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	ret = scpsys_sram_enable(scpd, ctl_addr);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 	if (ret < 0)
 		goto err_pwr_ack;
 
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
+
 	ret = scpsys_bus_protect_disable(scpd);
 	if (ret < 0)
-		goto err_pwr_ack;
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
 	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
@@ -383,6 +394,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
 	/* subsys power off */
 	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
@@ -419,6 +432,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk[sub_clk_cnt])) {
+				dev_err(&pdev->dev,
+					"Subsys clk get fail %ld\n",
+					PTR_ERR(clk[sub_clk_cnt]));
+				return PTR_ERR(clk[sub_clk_cnt]);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -506,6 +561,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
@@ -534,6 +590,18 @@ static struct scp *init_scp(struct platform_device *pdev,
 						data->basic_clk_id[j]);
 		}
 
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
+		}
+
 		genpd->name = data->name;
 		genpd->power_off = scpsys_power_off;
 		genpd->power_on = scpsys_power_on;
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 11/14] soc: mediatek: Add extra sram control

[Weiyi Lu]

For some power domains like vpu_core on MT8183 whose sram need to
do clock and internal isolation while power on/off sram.
We add a flag "sram_iso_ctrl" in scp_domain_data to judge if we
need to do the extra sram isolation control or not.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 0b5055c..992e5b3 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -57,6 +57,8 @@
 #define PWR_ON_BIT			BIT(2)
 #define PWR_ON_2ND_BIT			BIT(3)
 #define PWR_CLK_DIS_BIT			BIT(4)
+#define PWR_SRAM_CLKISO_BIT		BIT(5)
+#define PWR_SRAM_ISOINT_B_BIT		BIT(6)
 
 #define PWR_STATUS_CONN			BIT(1)
 #define PWR_STATUS_DISP			BIT(3)
@@ -115,6 +117,8 @@ enum clk_id {
  * @name: The domain name.
  * @sta_mask: The mask for power on/off status bit.
  * @ctl_offs: The offset for main power control register.
+ * @sram_iso_ctrl: The flag to judge if the power domain need to do
+ *                 the extra sram isolation control.
  * @sram_pdn_bits: The mask for sram power control bits.
  * @sram_pdn_ack_bits: The mask for sram power control acked bits.
  * @bus_prot_mask: The mask for single step bus protection.
@@ -130,6 +134,7 @@ struct scp_domain_data {
 	const char *name;
 	u32 sta_mask;
 	int ctl_offs;
+	bool sram_iso_ctrl;
 	u32 sram_pdn_bits;
 	u32 sram_pdn_ack_bits;
 	u32 bus_prot_mask;
@@ -268,6 +273,14 @@ static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
 			return ret;
 	}
 
+	if (scpd->data->sram_iso_ctrl)	{
+		val = readl(ctl_addr) | PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+		val &= ~PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+	}
+
 	return 0;
 }
 
@@ -277,6 +290,15 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
 	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	int tmp;
 
+	if (scpd->data->sram_iso_ctrl)	{
+		val = readl(ctl_addr);
+		val |= PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+		val &= ~PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+	}
+
 	val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
 	writel(val, ctl_addr);
 
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 12/14] soc: mediatek: Add MT8183 scpsys support

[Weiyi Lu]

Add scpsys driver for MT8183

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 226 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 226 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 992e5b3..eb828d9 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -20,6 +20,7 @@
 #include <dt-bindings/power/mt7622-power.h>
 #include <dt-bindings/power/mt7623a-power.h>
 #include <dt-bindings/power/mt8173-power.h>
+#include <dt-bindings/power/mt8183-power.h>
 
 #define MTK_POLL_DELAY_US   10
 #define MTK_POLL_TIMEOUT    USEC_PER_SEC
@@ -1129,6 +1130,217 @@ static void mtk_register_power_domains(struct platform_device *pdev,
 	{MT8173_POWER_DOMAIN_MFG_2D, MT8173_POWER_DOMAIN_MFG},
 };
 
+/*
+ * MT8183 power domain support
+ */
+
+static const struct scp_domain_data scp_domain_data_mt8183[] = {
+	[MT8183_POWER_DOMAIN_AUDIO] = {
+		.name = "audio",
+		.sta_mask = PWR_STATUS_AUDIO,
+		.ctl_offs = 0x0314,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+		.basic_clk_id = {"audio", "audio1", "audio2"},
+	},
+	[MT8183_POWER_DOMAIN_CONN] = {
+		.name = "conn",
+		.sta_mask = PWR_STATUS_CONN,
+		.ctl_offs = 0x032c,
+		.sram_pdn_bits = 0,
+		.sram_pdn_ack_bits = 0,
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
+				BIT(13) | BIT(14), BIT(13) | BIT(14)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_MFG_ASYNC] = {
+		.name = "mfg_async",
+		.sta_mask = PWR_STATUS_MFG_ASYNC,
+		.ctl_offs = 0x0334,
+		.sram_pdn_bits = 0,
+		.sram_pdn_ack_bits = 0,
+		.basic_clk_id = {"mfg"},
+	},
+	[MT8183_POWER_DOMAIN_MFG] = {
+		.name = "mfg",
+		.sta_mask = PWR_STATUS_MFG,
+		.ctl_offs = 0x0338,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	},
+	[MT8183_POWER_DOMAIN_MFG_CORE0] = {
+		.name = "mfg_core0",
+		.sta_mask = BIT(7),
+		.ctl_offs = 0x034c,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	},
+	[MT8183_POWER_DOMAIN_MFG_CORE1] = {
+		.name = "mfg_core1",
+		.sta_mask = BIT(20),
+		.ctl_offs = 0x0310,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	},
+	[MT8183_POWER_DOMAIN_MFG_2D] = {
+		.name = "mfg_2d",
+		.sta_mask = PWR_STATUS_MFG_2D,
+		.ctl_offs = 0x0348,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2a8, 0x2ac, 0, 0x258,
+				BIT(19) | BIT(20) | BIT(21),
+				BIT(19) | BIT(20) | BIT(21)),
+			BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
+				BIT(21) | BIT(22), BIT(21) | BIT(22)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_DISP] = {
+		.name = "disp",
+		.sta_mask = PWR_STATUS_DISP,
+		.ctl_offs = 0x030c,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.basic_clk_id = {"mm"},
+		.subsys_clk_prefix = "mm",
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2a8, 0x2ac, 0, 0x258,
+				BIT(16) | BIT(17), BIT(16) | BIT(17)),
+			BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
+				BIT(10) | BIT(11), BIT(10) | BIT(11)),
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				GENMASK(7, 0), GENMASK(7, 0)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_CAM] = {
+		.name = "cam",
+		.sta_mask = BIT(25),
+		.ctl_offs = 0x0344,
+		.sram_pdn_bits = GENMASK(9, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+		.basic_clk_id = {"cam"},
+		.subsys_clk_prefix = "cam",
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				BIT(4) | BIT(5) | BIT(9) | BIT(13),
+				BIT(4) | BIT(5) | BIT(9) | BIT(13)),
+			BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
+				BIT(28), BIT(28)),
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				BIT(11), 0),
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				BIT(3) | BIT(4), BIT(3) | BIT(4)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_ISP] = {
+		.name = "isp",
+		.sta_mask = PWR_STATUS_ISP,
+		.ctl_offs = 0x0308,
+		.sram_pdn_bits = GENMASK(9, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+		.basic_clk_id = {"isp"},
+		.subsys_clk_prefix = "isp",
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				BIT(3) | BIT(8), BIT(3) | BIT(8)),
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				BIT(10), 0),
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				BIT(2), BIT(2)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_VDEC] = {
+		.name = "vdec",
+		.sta_mask = BIT(31),
+		.ctl_offs = 0x0300,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.bp_table = {
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				BIT(7), BIT(7)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_VENC] = {
+		.name = "venc",
+		.sta_mask = PWR_STATUS_VENC,
+		.ctl_offs = 0x0304,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+		.bp_table = {
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				BIT(1), BIT(1)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_VPU_TOP] = {
+		.name = "vpu_top",
+		.sta_mask = BIT(26),
+		.ctl_offs = 0x0324,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.basic_clk_id = {"vpu", "vpu1"},
+		.subsys_clk_prefix = "vpu",
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				GENMASK(9, 6) | BIT(12),
+				GENMASK(9, 6) | BIT(12)),
+			BUS_PROT(IFR_TYPE, 0x2a0, 0x2a4, 0, 0x228,
+				BIT(27), BIT(27)),
+			BUS_PROT(IFR_TYPE, 0x2d4, 0x2d8, 0, 0x2ec,
+				BIT(10) | BIT(11), BIT(10) | BIT(11)),
+			BUS_PROT(SMI_TYPE, 0x3c4, 0x3c8, 0, 0x3c0,
+				BIT(5) | BIT(6), BIT(5) | BIT(6)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_VPU_CORE0] = {
+		.name = "vpu_core0",
+		.sta_mask = BIT(27),
+		.ctl_offs = 0x33c,
+		.sram_iso_ctrl = true,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+		.basic_clk_id = {"vpu2"},
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
+				BIT(6), BIT(6)),
+			BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
+				BIT(0) | BIT(2) | BIT(4),
+				BIT(0) | BIT(2) | BIT(4)),
+		},
+	},
+	[MT8183_POWER_DOMAIN_VPU_CORE1] = {
+		.name = "vpu_core1",
+		.sta_mask = BIT(28),
+		.ctl_offs = 0x0340,
+		.sram_iso_ctrl = true,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+		.basic_clk_id = {"vpu3"},
+		.bp_table = {
+			BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
+				BIT(7), BIT(7)),
+			BUS_PROT(IFR_TYPE, 0x2c4, 0x2c8, 0, 0x2e4,
+				BIT(1) | BIT(3) | BIT(5),
+				BIT(1) | BIT(3) | BIT(5)),
+		},
+	},
+};
+
+static const struct scp_subdomain scp_subdomain_mt8183[] = {
+	{MT8183_POWER_DOMAIN_MFG_ASYNC, MT8183_POWER_DOMAIN_MFG},
+	{MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_2D},
+	{MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_CORE0},
+	{MT8183_POWER_DOMAIN_MFG, MT8183_POWER_DOMAIN_MFG_CORE1},
+	{MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_CAM},
+	{MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_ISP},
+	{MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VDEC},
+	{MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VENC},
+	{MT8183_POWER_DOMAIN_DISP, MT8183_POWER_DOMAIN_VPU_TOP},
+	{MT8183_POWER_DOMAIN_VPU_TOP, MT8183_POWER_DOMAIN_VPU_CORE0},
+	{MT8183_POWER_DOMAIN_VPU_TOP, MT8183_POWER_DOMAIN_VPU_CORE1},
+};
+
 static const struct scp_soc_data mt2701_data = {
 	.domains = scp_domain_data_mt2701,
 	.num_domains = ARRAY_SIZE(scp_domain_data_mt2701),
@@ -1195,6 +1407,17 @@ static void mtk_register_power_domains(struct platform_device *pdev,
 	.bus_prot_reg_update = true,
 };
 
+static const struct scp_soc_data mt8183_data = {
+	.domains = scp_domain_data_mt8183,
+	.num_domains = ARRAY_SIZE(scp_domain_data_mt8183),
+	.subdomains = scp_subdomain_mt8183,
+	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt8183),
+	.regs = {
+		.pwr_sta_offs = 0x0180,
+		.pwr_sta2nd_offs = 0x0184
+	}
+};
+
 /*
  * scpsys driver init
  */
@@ -1219,6 +1442,9 @@ static void mtk_register_power_domains(struct platform_device *pdev,
 		.compatible = "mediatek,mt8173-scpsys",
 		.data = &mt8173_data,
 	}, {
+		.compatible = "mediatek,mt8183-scpsys",
+		.data = &mt8183_data,
+	}, {
 		/* sentinel */
 	}
 };
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 13/14] arm64: dts: Add power controller device node of MT8183

[Weiyi Lu]

Add power controller node and smi-common node for MT8183
In scpsys node, it contains clocks and regmapping of
infracfg and smi-common for bus protection.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 97f84aa..6cbbd77 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8183-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/mt8183-power.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -253,6 +254,62 @@
 			#interrupt-cells = <2>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8183-scpsys", "syscon";
+			#power-domain-cells = <1>;
+			reg = <0 0x10006000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+				 <&infracfg CLK_INFRA_AUDIO>,
+				 <&infracfg CLK_INFRA_AUDIO_26M_BCLK>,
+				 <&topckgen CLK_TOP_MUX_MFG>,
+				 <&topckgen CLK_TOP_MUX_MM>,
+				 <&topckgen CLK_TOP_MUX_CAM>,
+				 <&topckgen CLK_TOP_MUX_IMG>,
+				 <&topckgen CLK_TOP_MUX_IPU_IF>,
+				 <&topckgen CLK_TOP_MUX_DSP>,
+				 <&topckgen CLK_TOP_MUX_DSP1>,
+				 <&topckgen CLK_TOP_MUX_DSP2>,
+				 <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB1>,
+				 <&mmsys CLK_MM_GALS_COMM0>,
+				 <&mmsys CLK_MM_GALS_COMM1>,
+				 <&mmsys CLK_MM_GALS_CCU2MM>,
+				 <&mmsys CLK_MM_GALS_IPU12MM>,
+				 <&mmsys CLK_MM_GALS_IMG2MM>,
+				 <&mmsys CLK_MM_GALS_CAM2MM>,
+				 <&mmsys CLK_MM_GALS_IPU2MM>,
+				 <&imgsys CLK_IMG_LARB5>,
+				 <&imgsys CLK_IMG_LARB2>,
+				 <&camsys CLK_CAM_LARB6>,
+				 <&camsys CLK_CAM_LARB3>,
+				 <&camsys CLK_CAM_SENINF>,
+				 <&camsys CLK_CAM_CAMSV0>,
+				 <&camsys CLK_CAM_CAMSV1>,
+				 <&camsys CLK_CAM_CAMSV2>,
+				 <&camsys CLK_CAM_CCU>,
+				 <&ipu_conn CLK_IPU_CONN_IPU>,
+				 <&ipu_conn CLK_IPU_CONN_AHB>,
+				 <&ipu_conn CLK_IPU_CONN_AXI>,
+				 <&ipu_conn CLK_IPU_CONN_ISP>,
+				 <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+				 <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+			clock-names = "audio", "audio1", "audio2",
+				      "mfg", "mm", "cam",
+				      "isp", "vpu", "vpu1",
+				      "vpu2", "vpu3", "mm-0",
+				      "mm-1", "mm-2", "mm-3",
+				      "mm-4", "mm-5", "mm-6",
+				      "mm-7", "mm-8", "mm-9",
+				      "isp-0", "isp-1", "cam-0",
+				      "cam-1", "cam-2", "cam-3",
+				      "cam-4", "cam-5", "cam-6",
+				      "vpu-0", "vpu-1", "vpu-2",
+				      "vpu-3", "vpu-4", "vpu-5";
+			infracfg = <&infracfg>;
+			smi_comm = <&smi_common>;
+		};
+
 		apmixedsys: syscon@1000c000 {
 			compatible = "mediatek,mt8183-apmixedsys", "syscon";
 			reg = <0 0x1000c000 0 0x1000>;
@@ -585,6 +642,11 @@
 			#clock-cells = <1>;
 		};
 
+		smi_common: smi@14019000 {
+			compatible = "mediatek,mt8183-smi-common", "syscon";
+			reg = <0 0x14019000 0 0x1000>;
+		};
+
 		imgsys: syscon@15020000 {
 			compatible = "mediatek,mt8183-imgsys", "syscon";
 			reg = <0 0x15020000 0 0x1000>;
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 14/14] arm64: dts: Add power-domains properity to mfgcfg

[Weiyi Lu]

mfgcfg clock is under MFG_ASYNC power domain

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 6cbbd77..7e23179 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -634,6 +634,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		mmsys: syscon@14000000 {
-- 
1.8.1.1.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 09/14] soc: mediatek: Add multiple step bus protection control

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 10866 bytes --]

Hi Weiyi,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v5.4-rc5 next-20191029]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Weiyi-Lu/Mediatek-MT8183-scpsys-support/20191030-060526
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 23fdb198ae81f47a574296dab5167c5e136a02ba
config: mips-allmodconfig (attached as .config)
compiler: mips-linux-gcc (GCC) 7.4.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.4.0 make.cross ARCH=mips 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

Note: it may well be a FALSE warning. FWIW you are at least aware of it now.
http://gcc.gnu.org/wiki/Better_Uninitialized_Warnings

All warnings (new ones prefixed by >>):

   In file included from drivers/soc/mediatek/mtk-scpsys-ext.c:9:0:
   drivers/soc/mediatek/mtk-scpsys-ext.c: In function 'mtk_scpsys_ext_set_bus_protection':
>> include/linux/regmap.h:131:9: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
      __ret = regmap_read((map), (addr), &(val)); \
            ^
   drivers/soc/mediatek/mtk-scpsys-ext.c:51:18: note: 'map' was declared here
      struct regmap *map;
                     ^~~
   In file included from drivers/soc/mediatek/mtk-scpsys-ext.c:9:0:
   drivers/soc/mediatek/mtk-scpsys-ext.c: In function 'mtk_scpsys_ext_clear_bus_protection':
>> include/linux/regmap.h:131:9: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
      __ret = regmap_read((map), (addr), &(val)); \
            ^
   drivers/soc/mediatek/mtk-scpsys-ext.c:79:18: note: 'map' was declared here
      struct regmap *map;
                     ^~~
--
   In file included from drivers/soc//mediatek/mtk-scpsys-ext.c:9:0:
   drivers/soc//mediatek/mtk-scpsys-ext.c: In function 'mtk_scpsys_ext_set_bus_protection':
>> include/linux/regmap.h:131:9: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
      __ret = regmap_read((map), (addr), &(val)); \
            ^
   drivers/soc//mediatek/mtk-scpsys-ext.c:51:18: note: 'map' was declared here
      struct regmap *map;
                     ^~~
   In file included from drivers/soc//mediatek/mtk-scpsys-ext.c:9:0:
   drivers/soc//mediatek/mtk-scpsys-ext.c: In function 'mtk_scpsys_ext_clear_bus_protection':
>> include/linux/regmap.h:131:9: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
      __ret = regmap_read((map), (addr), &(val)); \
            ^
   drivers/soc//mediatek/mtk-scpsys-ext.c:79:18: note: 'map' was declared here
      struct regmap *map;
                     ^~~

vim +/map +131 include/linux/regmap.h

8019ff6cfc0440 Nariman Poushin         2015-07-16   73  
ca7a94464b5457 Kuninori Morimoto       2016-02-15   74  #define	regmap_update_bits(map, reg, mask, val) \
ca7a94464b5457 Kuninori Morimoto       2016-02-15   75  	regmap_update_bits_base(map, reg, mask, val, NULL, false, false)
30ed9cb7a49b49 Kuninori Morimoto       2016-02-15   76  #define	regmap_update_bits_async(map, reg, mask, val)\
30ed9cb7a49b49 Kuninori Morimoto       2016-02-15   77  	regmap_update_bits_base(map, reg, mask, val, NULL, true, false)
98c2dc48694a47 Kuninori Morimoto       2016-02-15   78  #define	regmap_update_bits_check(map, reg, mask, val, change)\
98c2dc48694a47 Kuninori Morimoto       2016-02-15   79  	regmap_update_bits_base(map, reg, mask, val, change, false, false)
89d8d4b833b0b2 Kuninori Morimoto       2016-02-15   80  #define	regmap_update_bits_check_async(map, reg, mask, val, change)\
89d8d4b833b0b2 Kuninori Morimoto       2016-02-15   81  	regmap_update_bits_base(map, reg, mask, val, change, true, false)
ca7a94464b5457 Kuninori Morimoto       2016-02-15   82  
b821957a5ae769 Kuninori Morimoto       2016-03-03   83  #define	regmap_write_bits(map, reg, mask, val) \
b821957a5ae769 Kuninori Morimoto       2016-03-03   84  	regmap_update_bits_base(map, reg, mask, val, NULL, false, true)
b821957a5ae769 Kuninori Morimoto       2016-03-03   85  
3674124b358946 Kuninori Morimoto       2016-02-15   86  #define	regmap_field_write(field, val) \
3674124b358946 Kuninori Morimoto       2016-02-15   87  	regmap_field_update_bits_base(field, ~0, val, NULL, false, false)
489061bba6c655 Kuninori Morimoto       2016-02-15   88  #define	regmap_field_force_write(field, val) \
489061bba6c655 Kuninori Morimoto       2016-02-15   89  	regmap_field_update_bits_base(field, ~0, val, NULL, false, true)
721ed64dda3774 Kuninori Morimoto       2016-02-15   90  #define	regmap_field_update_bits(field, mask, val)\
721ed64dda3774 Kuninori Morimoto       2016-02-15   91  	regmap_field_update_bits_base(field, mask, val, NULL, false, false)
489061bba6c655 Kuninori Morimoto       2016-02-15   92  #define	regmap_field_force_update_bits(field, mask, val) \
489061bba6c655 Kuninori Morimoto       2016-02-15   93  	regmap_field_update_bits_base(field, mask, val, NULL, false, true)
3674124b358946 Kuninori Morimoto       2016-02-15   94  
bbf2c46f46e23a Kuninori Morimoto       2016-02-15   95  #define	regmap_fields_write(field, id, val) \
bbf2c46f46e23a Kuninori Morimoto       2016-02-15   96  	regmap_fields_update_bits_base(field, id, ~0, val, NULL, false, false)
e6ef243fa4660f Kuninori Morimoto       2016-02-15   97  #define	regmap_fields_force_write(field, id, val) \
e6ef243fa4660f Kuninori Morimoto       2016-02-15   98  	regmap_fields_update_bits_base(field, id, ~0, val, NULL, false, true)
48138609135fc9 Kuninori Morimoto       2016-02-15   99  #define	regmap_fields_update_bits(field, id, mask, val)\
48138609135fc9 Kuninori Morimoto       2016-02-15  100  	regmap_fields_update_bits_base(field, id, mask, val, NULL, false, false)
e6ef243fa4660f Kuninori Morimoto       2016-02-15  101  #define	regmap_fields_force_update_bits(field, id, mask, val) \
e6ef243fa4660f Kuninori Morimoto       2016-02-15  102  	regmap_fields_update_bits_base(field, id, mask, val, NULL, false, true)
bbf2c46f46e23a Kuninori Morimoto       2016-02-15  103  
08188ba8822163 Philipp Zabel           2016-07-06  104  /**
08188ba8822163 Philipp Zabel           2016-07-06  105   * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs
2cf8e2dfdf8836 Charles Keepax          2017-01-12  106   *
08188ba8822163 Philipp Zabel           2016-07-06  107   * @map: Regmap to read from
08188ba8822163 Philipp Zabel           2016-07-06  108   * @addr: Address to poll
08188ba8822163 Philipp Zabel           2016-07-06  109   * @val: Unsigned integer variable to read the value into
08188ba8822163 Philipp Zabel           2016-07-06  110   * @cond: Break condition (usually involving @val)
08188ba8822163 Philipp Zabel           2016-07-06  111   * @sleep_us: Maximum time to sleep between reads in us (0
08188ba8822163 Philipp Zabel           2016-07-06  112   *            tight-loops).  Should be less than ~20ms since usleep_range
458f69ef36656d Mauro Carvalho Chehab   2019-06-12  113   *            is used (see Documentation/timers/timers-howto.rst).
08188ba8822163 Philipp Zabel           2016-07-06  114   * @timeout_us: Timeout in us, 0 means never timeout
08188ba8822163 Philipp Zabel           2016-07-06  115   *
08188ba8822163 Philipp Zabel           2016-07-06  116   * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
08188ba8822163 Philipp Zabel           2016-07-06  117   * error return value in case of a error read. In the two former cases,
08188ba8822163 Philipp Zabel           2016-07-06  118   * the last read value at @addr is stored in @val. Must not be called
08188ba8822163 Philipp Zabel           2016-07-06  119   * from atomic context if sleep_us or timeout_us are used.
08188ba8822163 Philipp Zabel           2016-07-06  120   *
08188ba8822163 Philipp Zabel           2016-07-06  121   * This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
08188ba8822163 Philipp Zabel           2016-07-06  122   */
08188ba8822163 Philipp Zabel           2016-07-06  123  #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \
08188ba8822163 Philipp Zabel           2016-07-06  124  ({ \
1b0c22e45508ff Arnd Bergmann           2017-10-13  125  	u64 __timeout_us = (timeout_us); \
1b0c22e45508ff Arnd Bergmann           2017-10-13  126  	unsigned long __sleep_us = (sleep_us); \
1b0c22e45508ff Arnd Bergmann           2017-10-13  127  	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03  128  	int __ret; \
1b0c22e45508ff Arnd Bergmann           2017-10-13  129  	might_sleep_if(__sleep_us); \
08188ba8822163 Philipp Zabel           2016-07-06  130  	for (;;) { \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03 @131  		__ret = regmap_read((map), (addr), &(val)); \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03  132  		if (__ret) \
08188ba8822163 Philipp Zabel           2016-07-06  133  			break; \
08188ba8822163 Philipp Zabel           2016-07-06  134  		if (cond) \
08188ba8822163 Philipp Zabel           2016-07-06  135  			break; \
1b0c22e45508ff Arnd Bergmann           2017-10-13  136  		if ((__timeout_us) && \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03  137  		    ktime_compare(ktime_get(), __timeout) > 0) { \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03  138  			__ret = regmap_read((map), (addr), &(val)); \
08188ba8822163 Philipp Zabel           2016-07-06  139  			break; \
08188ba8822163 Philipp Zabel           2016-07-06  140  		} \
1b0c22e45508ff Arnd Bergmann           2017-10-13  141  		if (__sleep_us) \
1b0c22e45508ff Arnd Bergmann           2017-10-13  142  			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
08188ba8822163 Philipp Zabel           2016-07-06  143  	} \
780b1350d316fd Ramesh Shanmugasundaram 2017-07-03  144  	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
08188ba8822163 Philipp Zabel           2016-07-06  145  })
08188ba8822163 Philipp Zabel           2016-07-06  146  

:::::: The code at line 131 was first introduced by commit
:::::: 780b1350d316fda28d85fcae17854c778d89cbbe regmap: Avoid namespace collision within macro & tidy up

:::::: TO: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
:::::: CC: Mark Brown <broonie@kernel.org>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 62069 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 09/14] soc: mediatek: Add multiple step bus protection control

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2986 bytes --]

Hi Weiyi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.4-rc5 next-20191029]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Weiyi-Lu/Mediatek-MT8183-scpsys-support/20191030-060526
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 23fdb198ae81f47a574296dab5167c5e136a02ba
config: mips-allmodconfig (attached as .config)
compiler: mips-linux-gcc (GCC) 7.4.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.4.0 make.cross ARCH=mips 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>):

   In file included from <command-line>:0:0:
>> include/linux/soc/mediatek/scpsys-ext.h:26:2: error: unknown type name 'u32'
     u32 set_ofs;
     ^~~
   include/linux/soc/mediatek/scpsys-ext.h:27:2: error: unknown type name 'u32'
     u32 clr_ofs;
     ^~~
   include/linux/soc/mediatek/scpsys-ext.h:28:2: error: unknown type name 'u32'
     u32 en_ofs;
     ^~~
   include/linux/soc/mediatek/scpsys-ext.h:29:2: error: unknown type name 'u32'
     u32 sta_ofs;
     ^~~
   include/linux/soc/mediatek/scpsys-ext.h:30:2: error: unknown type name 'u32'
     u32 mask;
     ^~~
   include/linux/soc/mediatek/scpsys-ext.h:31:2: error: unknown type name 'u32'
     u32 clr_ack_mask;
     ^~~
>> include/linux/soc/mediatek/scpsys-ext.h:35:9: warning: 'struct regmap' declared inside parameter list will not be visible outside of this definition or declaration
     struct regmap *infracfg, struct regmap *smi_common);
            ^~~~~~
   include/linux/soc/mediatek/scpsys-ext.h:37:9: warning: 'struct regmap' declared inside parameter list will not be visible outside of this definition or declaration
     struct regmap *infracfg, struct regmap *smi_common);
            ^~~~~~

vim +/u32 +26 include/linux/soc/mediatek/scpsys-ext.h

    23	
    24	struct bus_prot {
    25		enum regmap_type type;
  > 26		u32 set_ofs;
    27		u32 clr_ofs;
    28		u32 en_ofs;
  > 29		u32 sta_ofs;
    30		u32 mask;
    31		u32 clr_ack_mask;
    32	};
    33	
    34	int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
  > 35		struct regmap *infracfg, struct regmap *smi_common);
    36	int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
    37		struct regmap *infracfg, struct regmap *smi_common);
    38	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 62069 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel