* [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml
2019-11-20 11:14 [PATCH 0/4] media: meson: vdec: add g12a platform Neil Armstrong
@ 2019-11-20 11:14 ` Neil Armstrong
2019-12-03 23:21 ` Rob Herring
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: add bindings for G12A family Neil Armstrong
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Neil Armstrong @ 2019-11-20 11:14 UTC (permalink / raw)
To: mjourdan, devicetree
Cc: linux-amlogic, linux-media, linux-kernel, linux-arm-kernel,
Neil Armstrong
Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Video Controller over to YAML schemas.
This yaml bindings will then be extended to support new SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/media/amlogic,gx-vdec.yaml | 107 ++++++++++++++++++
.../bindings/media/amlogic,vdec.txt | 72 ------------
2 files changed, 107 insertions(+), 72 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
delete mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
new file mode 100644
index 000000000000..878944867d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Video Decoder
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+ The video decoding IP lies within the DOS memory region,
+ except for the hardware bitstream parser that makes use of an undocumented
+ region.
+
+ It makes use of the following blocks:
+ - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+ then feed from this VIFIFO.
+ - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+ - VDEC_HEVC can decode HEVC and VP9.
+
+ Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+ concurrently.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,gxbb-vdec # GXBB (S905)
+ - amlogic,gxl-vdec # GXL (S905X, S905D)
+ - amlogic,gxm-vdec # GXM (S912)
+ - const: amlogic,gx-vdec
+
+ interrupts:
+ minItems: 2
+
+ interrupt-names:
+ items:
+ - const: vdec
+ - const: esparser
+
+ reg:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: dos
+ - const: esparser
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: esparser
+
+ clocks:
+ minItems: 4
+
+ clock-names:
+ items:
+ - const: dos_parser
+ - const: dos
+ - const: vdec_1
+ - const: vdec_hevc
+
+ amlogic,ao-sysctrl:
+ description: should point to the AOBUS sysctrl node
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ amlogic,canvas:
+ description: should point to a canvas provider node
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - amlogic,ao-sysctrl
+ - amlogic,canvas
+
+examples:
+ - |
+ vdec: video-decoder@c8820000 {
+ compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+ reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>;
+ reg-names = "dos", "esparser";
+ interrupts = <44>, <32>;
+ interrupt-names = "vdec", "esparser";
+ clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>;
+ clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+ resets = <&reset_parser>;
+ reset-names = "esparser";
+ amlogic,ao-sysctrl = <&sysctrl_AO>;
+ amlogic,canvas = <&canvas>;
+ };
diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt
deleted file mode 100644
index 9b6aace86ca7..000000000000
--- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Amlogic Video Decoder
-================================
-
-The video decoding IP lies within the DOS memory region,
-except for the hardware bitstream parser that makes use of an undocumented
-region.
-
-It makes use of the following blocks:
-
-- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
-then feed from this VIFIFO.
-- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
-- VDEC_HEVC can decode HEVC and VP9.
-
-Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
-concurrently.
-
-Device Tree Bindings:
----------------------
-
-VDEC: Video Decoder
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
- - GXBB (S905) : "amlogic,gxbb-vdec"
- - GXL (S905X, S905D) : "amlogic,gxl-vdec"
- - GXM (S912) : "amlogic,gxm-vdec"
- followed by the common "amlogic,gx-vdec"
-- reg: base address and size of he following memory-mapped regions :
- - dos
- - esparser
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the following IRQs:
- - vdec
- - esparser
-- interrupt-names: should contain the names of the previous interrupts
-- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
-- amlogic,canvas: should point to a canvas provider node
-- clocks: should contain the following clocks :
- - dos_parser
- - dos
- - vdec_1
- - vdec_hevc
-- clock-names: should contain the names of the previous clocks
-- resets: should contain the parser reset
-- reset-names: should be "esparser"
-
-Example:
-
-vdec: video-codec@c8820000 {
- compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
- reg = <0x0 0xc8820000 0x0 0x10000>,
- <0x0 0xc110a580 0x0 0xe4>;
- reg-names = "dos", "esparser";
-
- interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "vdec", "esparser";
-
- amlogic,ao-sysctrl = <&sysctrl_AO>;
- amlogic,canvas = <&canvas>;
-
- clocks = <&clkc CLKID_DOS_PARSER>,
- <&clkc CLKID_DOS>,
- <&clkc CLKID_VDEC_1>,
- <&clkc CLKID_VDEC_HEVC>;
- clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
-
- resets = <&reset RESET_PARSER>;
- reset-names = "esparser";
-};
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml
2019-11-20 11:14 ` [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml Neil Armstrong
@ 2019-12-03 23:21 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2019-12-03 23:21 UTC (permalink / raw)
To: Neil Armstrong
Cc: mjourdan, devicetree, Neil Armstrong, linux-kernel,
linux-amlogic, linux-arm-kernel, linux-media
On Wed, 20 Nov 2019 12:14:27 +0100, Neil Armstrong wrote:
> Now that we have the DT validation in place, let's convert the device tree
> bindings for the Amlogic Video Controller over to YAML schemas.
>
> This yaml bindings will then be extended to support new SoCs.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/media/amlogic,gx-vdec.yaml | 107 ++++++++++++++++++
> .../bindings/media/amlogic,vdec.txt | 72 ------------
> 2 files changed, 107 insertions(+), 72 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: add bindings for G12A family
2019-11-20 11:14 [PATCH 0/4] media: meson: vdec: add g12a platform Neil Armstrong
2019-11-20 11:14 ` [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml Neil Armstrong
@ 2019-11-20 11:14 ` Neil Armstrong
2019-12-03 23:21 ` [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: " Rob Herring
2019-11-20 11:14 ` [PATCH 3/4] media: meson: vdec: add g12a platform Neil Armstrong
2019-11-20 11:14 ` [PATCH 4/4] arm64: dts: meson-g12-common: add video decoder node Neil Armstrong
3 siblings, 1 reply; 8+ messages in thread
From: Neil Armstrong @ 2019-11-20 11:14 UTC (permalink / raw)
To: mjourdan, devicetree
Cc: linux-amlogic, linux-media, linux-kernel, linux-arm-kernel,
Neil Armstrong
Add bindings to support the Amlogic Video Decoder on the Amlogic G12A
family.
For the G12A family, a supplementary clock is needed to operate the
HEVC/VP9 decoder.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/media/amlogic,gx-vdec.yaml | 57 +++++++++++++++----
1 file changed, 46 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 878944867d6e..8ea979bb97e6 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -27,12 +27,15 @@ description: |
properties:
compatible:
- items:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,gxbb-vdec # GXBB (S905)
+ - amlogic,gxl-vdec # GXL (S905X, S905D)
+ - amlogic,gxm-vdec # GXM (S912)
+ - const: amlogic,gx-vdec
- enum:
- - amlogic,gxbb-vdec # GXBB (S905)
- - amlogic,gxl-vdec # GXL (S905X, S905D)
- - amlogic,gxm-vdec # GXM (S912)
- - const: amlogic,gx-vdec
+ - amlogic,g12a-vdec # G12A (S905X2, S905D2)
interrupts:
minItems: 2
@@ -59,13 +62,9 @@ properties:
clocks:
minItems: 4
+ maxItems: 5
- clock-names:
- items:
- - const: dos_parser
- - const: dos
- - const: vdec_1
- - const: vdec_hevc
+ clock-names: true
amlogic,ao-sysctrl:
description: should point to the AOBUS sysctrl node
@@ -77,6 +76,42 @@ properties:
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,gx-vdec
+
+ then:
+ properties:
+ clock-names:
+ minItems: 4
+ items:
+ - const: dos_parser
+ - const: dos
+ - const: vdec_1
+ - const: vdec_hevc
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-vdec
+
+ then:
+ properties:
+ clock-names:
+ minItems: 5
+ items:
+ - const: dos_parser
+ - const: dos
+ - const: vdec_1
+ - const: vdec_hevc
+ - const: vdec_hevcf
+
required:
- compatible
- reg
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/4] dt-bindings: media: amlogic,gx-vdec: add bindings for G12A family
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: add bindings for G12A family Neil Armstrong
@ 2019-12-03 23:21 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2019-12-03 23:21 UTC (permalink / raw)
To: Neil Armstrong
Cc: mjourdan, devicetree, linux-kernel, linux-amlogic,
linux-arm-kernel, linux-media
On Wed, Nov 20, 2019 at 12:14:28PM +0100, Neil Armstrong wrote:
> Add bindings to support the Amlogic Video Decoder on the Amlogic G12A
> family.
>
> For the G12A family, a supplementary clock is needed to operate the
> HEVC/VP9 decoder.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/media/amlogic,gx-vdec.yaml | 57 +++++++++++++++----
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 878944867d6e..8ea979bb97e6 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -27,12 +27,15 @@ description: |
>
> properties:
> compatible:
> - items:
> + oneOf:
> + - items:
> + - enum:
> + - amlogic,gxbb-vdec # GXBB (S905)
> + - amlogic,gxl-vdec # GXL (S905X, S905D)
> + - amlogic,gxm-vdec # GXM (S912)
> + - const: amlogic,gx-vdec
> - enum:
> - - amlogic,gxbb-vdec # GXBB (S905)
> - - amlogic,gxl-vdec # GXL (S905X, S905D)
> - - amlogic,gxm-vdec # GXM (S912)
> - - const: amlogic,gx-vdec
> + - amlogic,g12a-vdec # G12A (S905X2, S905D2)
>
> interrupts:
> minItems: 2
> @@ -59,13 +62,9 @@ properties:
>
> clocks:
> minItems: 4
> + maxItems: 5
>
> - clock-names:
> - items:
> - - const: dos_parser
> - - const: dos
> - - const: vdec_1
> - - const: vdec_hevc
You can leave this here and add the 5th clock along with { minItems: 4,
maxItems: 5 }.
Then the 'if' schema just needs a 'maxItems: 4'.
> + clock-names: true
>
> amlogic,ao-sysctrl:
> description: should point to the AOBUS sysctrl node
> @@ -77,6 +76,42 @@ properties:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/phandle
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,gx-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 4
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,g12a-vdec
> +
> + then:
> + properties:
> + clock-names:
> + minItems: 5
> + items:
> + - const: dos_parser
> + - const: dos
> + - const: vdec_1
> + - const: vdec_hevc
> + - const: vdec_hevcf
> +
> required:
> - compatible
> - reg
> --
> 2.22.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/4] media: meson: vdec: add g12a platform
2019-11-20 11:14 [PATCH 0/4] media: meson: vdec: add g12a platform Neil Armstrong
2019-11-20 11:14 ` [PATCH 1/4] dt-bindings: media: amlogic,vdec: convert to yaml Neil Armstrong
2019-11-20 11:14 ` [PATCH 2/4] dt-bindings: media: amlogic, gx-vdec: add bindings for G12A family Neil Armstrong
@ 2019-11-20 11:14 ` Neil Armstrong
2019-11-20 11:14 ` [PATCH 4/4] arm64: dts: meson-g12-common: add video decoder node Neil Armstrong
3 siblings, 0 replies; 8+ messages in thread
From: Neil Armstrong @ 2019-11-20 11:14 UTC (permalink / raw)
To: mjourdan
Cc: linux-amlogic, Neil Armstrong, linux-kernel, linux-arm-kernel,
linux-media
From: Maxime Jourdan <mjourdan@baylibre.com>
Add support for the G12A platform by:
- adding the G12A codec support, here MPEG1 & MPEG2
- getting the new hevcf clock for the upcoming HEVC/VP9 decoding support
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/staging/media/meson/vdec/vdec.c | 13 ++++++--
drivers/staging/media/meson/vdec/vdec.h | 1 +
.../staging/media/meson/vdec/vdec_platform.c | 30 +++++++++++++++++++
.../staging/media/meson/vdec/vdec_platform.h | 2 ++
4 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/meson/vdec/vdec.c b/drivers/staging/media/meson/vdec/vdec.c
index 0a1a04fd5d13..875a12be9c9e 100644
--- a/drivers/staging/media/meson/vdec/vdec.c
+++ b/drivers/staging/media/meson/vdec/vdec.c
@@ -956,6 +956,8 @@ static const struct of_device_id vdec_dt_match[] = {
.data = &vdec_platform_gxm },
{ .compatible = "amlogic,gxl-vdec",
.data = &vdec_platform_gxl },
+ { .compatible = "amlogic,g12a-vdec",
+ .data = &vdec_platform_g12a },
{}
};
MODULE_DEVICE_TABLE(of, vdec_dt_match);
@@ -1003,6 +1005,15 @@ static int vdec_probe(struct platform_device *pdev)
if (IS_ERR(core->canvas))
return PTR_ERR(core->canvas);
+ of_id = of_match_node(vdec_dt_match, dev->of_node);
+ core->platform = of_id->data;
+
+ if (core->platform->revision == VDEC_REVISION_G12A) {
+ core->vdec_hevcf_clk = devm_clk_get(dev, "vdec_hevcf");
+ if (IS_ERR(core->vdec_hevcf_clk))
+ return -EPROBE_DEFER;
+ }
+
core->dos_parser_clk = devm_clk_get(dev, "dos_parser");
if (IS_ERR(core->dos_parser_clk))
return -EPROBE_DEFER;
@@ -1045,8 +1056,6 @@ static int vdec_probe(struct platform_device *pdev)
goto err_vdev_release;
}
- of_id = of_match_node(vdec_dt_match, dev->of_node);
- core->platform = of_id->data;
core->vdev_dec = vdev;
core->dev_dec = dev;
mutex_init(&core->lock);
diff --git a/drivers/staging/media/meson/vdec/vdec.h b/drivers/staging/media/meson/vdec/vdec.h
index d811e7976519..0faa1ec4858e 100644
--- a/drivers/staging/media/meson/vdec/vdec.h
+++ b/drivers/staging/media/meson/vdec/vdec.h
@@ -74,6 +74,7 @@ struct amvdec_core {
struct clk *dos_clk;
struct clk *vdec_1_clk;
struct clk *vdec_hevc_clk;
+ struct clk *vdec_hevcf_clk;
struct reset_control *esparser_reset;
diff --git a/drivers/staging/media/meson/vdec/vdec_platform.c b/drivers/staging/media/meson/vdec/vdec_platform.c
index 824dbc7f46f5..7845a889ce24 100644
--- a/drivers/staging/media/meson/vdec/vdec_platform.c
+++ b/drivers/staging/media/meson/vdec/vdec_platform.c
@@ -82,6 +82,30 @@ static const struct amvdec_format vdec_formats_gxm[] = {
},
};
+static const struct amvdec_format vdec_formats_g12a[] = {
+ {
+ .pixfmt = V4L2_PIX_FMT_MPEG1,
+ .min_buffers = 8,
+ .max_buffers = 8,
+ .max_width = 1920,
+ .max_height = 1080,
+ .vdec_ops = &vdec_1_ops,
+ .codec_ops = &codec_mpeg12_ops,
+ .firmware_path = "meson/vdec/gxl_mpeg12.bin",
+ .pixfmts_cap = { V4L2_PIX_FMT_NV12M, V4L2_PIX_FMT_YUV420M, 0 },
+ }, {
+ .pixfmt = V4L2_PIX_FMT_MPEG2,
+ .min_buffers = 8,
+ .max_buffers = 8,
+ .max_width = 1920,
+ .max_height = 1080,
+ .vdec_ops = &vdec_1_ops,
+ .codec_ops = &codec_mpeg12_ops,
+ .firmware_path = "meson/vdec/gxl_mpeg12.bin",
+ .pixfmts_cap = { V4L2_PIX_FMT_NV12M, V4L2_PIX_FMT_YUV420M, 0 },
+ },
+};
+
const struct vdec_platform vdec_platform_gxbb = {
.formats = vdec_formats_gxbb,
.num_formats = ARRAY_SIZE(vdec_formats_gxbb),
@@ -99,3 +123,9 @@ const struct vdec_platform vdec_platform_gxm = {
.num_formats = ARRAY_SIZE(vdec_formats_gxm),
.revision = VDEC_REVISION_GXM,
};
+
+const struct vdec_platform vdec_platform_g12a = {
+ .formats = vdec_formats_g12a,
+ .num_formats = ARRAY_SIZE(vdec_formats_g12a),
+ .revision = VDEC_REVISION_G12A,
+};
diff --git a/drivers/staging/media/meson/vdec/vdec_platform.h b/drivers/staging/media/meson/vdec/vdec_platform.h
index f6025326db1d..7c61b941b39f 100644
--- a/drivers/staging/media/meson/vdec/vdec_platform.h
+++ b/drivers/staging/media/meson/vdec/vdec_platform.h
@@ -15,6 +15,7 @@ enum vdec_revision {
VDEC_REVISION_GXBB,
VDEC_REVISION_GXL,
VDEC_REVISION_GXM,
+ VDEC_REVISION_G12A,
};
struct vdec_platform {
@@ -26,5 +27,6 @@ struct vdec_platform {
extern const struct vdec_platform vdec_platform_gxbb;
extern const struct vdec_platform vdec_platform_gxm;
extern const struct vdec_platform vdec_platform_gxl;
+extern const struct vdec_platform vdec_platform_g12a;
#endif
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/4] arm64: dts: meson-g12-common: add video decoder node
2019-11-20 11:14 [PATCH 0/4] media: meson: vdec: add g12a platform Neil Armstrong
` (2 preceding siblings ...)
2019-11-20 11:14 ` [PATCH 3/4] media: meson: vdec: add g12a platform Neil Armstrong
@ 2019-11-20 11:14 ` Neil Armstrong
2019-12-13 16:51 ` Kevin Hilman
3 siblings, 1 reply; 8+ messages in thread
From: Neil Armstrong @ 2019-11-20 11:14 UTC (permalink / raw)
To: mjourdan
Cc: linux-amlogic, Neil Armstrong, linux-kernel, linux-arm-kernel,
linux-media
From: Maxime Jourdan <mjourdan@baylibre.com>
Add the video decoder node for the Amlogic G12A and compatible SoC.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../boot/dts/amlogic/meson-g12-common.dtsi | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 3f39e020f74e..6fe7dead5a92 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2152,6 +2152,29 @@
};
};
+ vdec: video-decoder@ff620000 {
+ compatible = "amlogic,g12a-vdec";
+ reg = <0x0 0xff620000 0x0 0x10000>,
+ <0x0 0xffd0e180 0x0 0xe4>;
+ reg-names = "dos", "esparser";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "vdec", "esparser";
+
+ amlogic,ao-sysctrl = <&rti>;
+ amlogic,canvas = <&canvas>;
+
+ clocks = <&clkc CLKID_PARSER>,
+ <&clkc CLKID_DOS>,
+ <&clkc CLKID_VDEC_1>,
+ <&clkc CLKID_VDEC_HEVC>,
+ <&clkc CLKID_VDEC_HEVCF>;
+ clock-names = "dos_parser", "dos", "vdec_1",
+ "vdec_hevc", "vdec_hevcf";
+ resets = <&reset RESET_PARSER>;
+ reset-names = "esparser";
+ };
+
vpu: vpu@ff900000 {
compatible = "amlogic,meson-g12a-vpu";
reg = <0x0 0xff900000 0x0 0x100000>,
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread