From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH 4/4] ARM: dts: ux500: Fix up DSI controller nodes
Date: Tue, 26 Nov 2019 13:47:38 +0100 [thread overview]
Message-ID: <20191126124738.77690-4-linus.walleij@linaro.org> (raw)
In-Reply-To: <20191126124738.77690-1-linus.walleij@linaro.org>
These nodes should be named dsi-controller@* so fix it up.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 6 +++---
arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi | 2 +-
arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 4e02b1b6c0bf..f4fb782d3afc 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1092,7 +1092,7 @@
ranges;
status = "disabled";
- dsi0: dsi@a0351000 {
+ dsi0: dsi-controller@a0351000 {
compatible = "ste,mcde-dsi";
reg = <0xa0351000 0x1000>;
clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
@@ -1100,7 +1100,7 @@
#address-cells = <1>;
#size-cells = <0>;
};
- dsi1: dsi@a0352000 {
+ dsi1: dsi-controller@a0352000 {
compatible = "ste,mcde-dsi";
reg = <0xa0352000 0x1000>;
clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
@@ -1108,7 +1108,7 @@
#address-cells = <1>;
#size-cells = <0>;
};
- dsi2: dsi@a0353000 {
+ dsi2: dsi-controller@a0353000 {
compatible = "ste,mcde-dsi";
reg = <0xa0353000 0x1000>;
/* This DSI port only has the Low Power / Energy Save clock */
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index e024520f4d47..de82b9db956f 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -66,7 +66,7 @@
mcde@a0350000 {
status = "okay";
- dsi@a0351000 {
+ dsi-controller@a0351000 {
panel {
compatible = "samsung,s6d16d0";
reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f0a1cb..9f285c7cf914 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -45,7 +45,7 @@
mcde@a0350000 {
status = "okay";
- dsi@a0351000 {
+ dsi-controller@a0351000 {
panel {
compatible = "sony,acx424akp";
reg = <0>;
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-26 12:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-26 12:47 [PATCH 1/4] ARM: dts: ux500: Break out DB8500 DTSI Linus Walleij
2019-11-26 12:47 ` [PATCH 2/4] ARM: dts: ux500: Split TVK DTSI files in two Linus Walleij
2019-11-26 12:47 ` [PATCH 3/4] ARM: dts: ux500: Add devicetree for HREF520 Linus Walleij
2019-11-26 12:47 ` Linus Walleij [this message]
2019-11-26 18:14 ` [PATCH 4/4] ARM: dts: ux500: Fix up DSI controller nodes Stephan Gerhold
2019-11-27 14:04 ` Linus Walleij
2019-11-26 18:03 ` [PATCH 1/4] ARM: dts: ux500: Break out DB8500 DTSI Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126124738.77690-4-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=stephan@gerhold.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).