* [PATCH] drm/tilcdc: Switch to using GPIO descriptors
@ 2019-12-03 13:09 Linus Walleij
2019-12-03 15:50 ` David Lechner
2019-12-03 18:29 ` Jyri Sarha
0 siblings, 2 replies; 4+ messages in thread
From: Linus Walleij @ 2019-12-03 13:09 UTC (permalink / raw)
To: dri-devel, Maarten Lankhorst, Maxime Ripard, Sean Paul
Cc: Linus Walleij, Tomi Valkeinen, Jyri Sarha, linux-arm-kernel,
David Lechner
The TI LCDC picks a GPIO line from the device tree to use
for DPMS power on/off. We can switch this to use a GPIO
descriptor pretty easily. Make sure to request the GPIO
"as is" so that the DPMS state that we start (boot) in is
preserved.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 30 ++++++++++++--------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
index 530edb3b51cc..41cd9a7c4316 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
@@ -4,9 +4,8 @@
* Author: Rob Clark <robdclark@gmail.com>
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
-#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
@@ -21,7 +20,7 @@
struct tfp410_module {
struct tilcdc_module base;
struct i2c_adapter *i2c;
- int gpio;
+ struct gpio_desc *power_gpiod;
};
#define to_tfp410_module(x) container_of(x, struct tfp410_module, base)
@@ -58,10 +57,10 @@ static void tfp410_encoder_dpms(struct drm_encoder *encoder, int mode)
if (mode == DRM_MODE_DPMS_ON) {
DBG("Power on");
- gpio_direction_output(tfp410_encoder->mod->gpio, 1);
+ gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 1);
} else {
DBG("Power off");
- gpio_direction_output(tfp410_encoder->mod->gpio, 0);
+ gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 0);
}
tfp410_encoder->dpms = mode;
@@ -318,17 +317,17 @@ static int tfp410_probe(struct platform_device *pdev)
of_node_put(i2c_node);
- tfp410_mod->gpio = of_get_named_gpio_flags(node, "powerdn-gpio",
- 0, NULL);
- if (tfp410_mod->gpio < 0) {
- dev_warn(&pdev->dev, "No power down GPIO\n");
- } else {
- ret = gpio_request(tfp410_mod->gpio, "DVI_PDn");
- if (ret) {
- dev_err(&pdev->dev, "could not get DVI_PDn gpio\n");
- goto fail_adapter;
- }
+ tfp410_mod->power_gpiod = devm_gpiod_get_optional(&pdev->dev,
+ "powerdn",
+ GPIOD_ASIS);
+ if (IS_ERR(tfp410_mod->power_gpiod)) {
+ dev_err(&pdev->dev, "could not get DVI_PDn gpio\n");
+ goto fail_adapter;
}
+ if (!tfp410_mod->power_gpiod)
+ dev_warn(&pdev->dev, "No power down GPIO\n");
+ else
+ gpiod_set_consumer_name(tfp410_mod->power_gpiod, "DVI_PDn");
return 0;
@@ -346,7 +345,6 @@ static int tfp410_remove(struct platform_device *pdev)
struct tfp410_module *tfp410_mod = to_tfp410_module(mod);
i2c_put_adapter(tfp410_mod->i2c);
- gpio_free(tfp410_mod->gpio);
tilcdc_module_cleanup(mod);
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/tilcdc: Switch to using GPIO descriptors
2019-12-03 13:09 [PATCH] drm/tilcdc: Switch to using GPIO descriptors Linus Walleij
@ 2019-12-03 15:50 ` David Lechner
2019-12-03 18:29 ` Jyri Sarha
1 sibling, 0 replies; 4+ messages in thread
From: David Lechner @ 2019-12-03 15:50 UTC (permalink / raw)
To: Linus Walleij, dri-devel, Maarten Lankhorst, Maxime Ripard, Sean Paul
Cc: Tomi Valkeinen, Jyri Sarha, linux-arm-kernel
On 12/3/19 7:09 AM, Linus Walleij wrote:
> The TI LCDC picks a GPIO line from the device tree to use
> for DPMS power on/off. We can switch this to use a GPIO
> descriptor pretty easily. Make sure to request the GPIO
> "as is" so that the DPMS state that we start (boot) in is
> preserved.
>
> Cc: Jyri Sarha <jsarha@ti.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: David Lechner <david@lechnology.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
Reviewed-by: David Lechner <david@lechnology.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/tilcdc: Switch to using GPIO descriptors
2019-12-03 13:09 [PATCH] drm/tilcdc: Switch to using GPIO descriptors Linus Walleij
2019-12-03 15:50 ` David Lechner
@ 2019-12-03 18:29 ` Jyri Sarha
2019-12-04 14:30 ` Sam Ravnborg
1 sibling, 1 reply; 4+ messages in thread
From: Jyri Sarha @ 2019-12-03 18:29 UTC (permalink / raw)
To: Linus Walleij, dri-devel, Maarten Lankhorst, Maxime Ripard, Sean Paul
Cc: Tomi Valkeinen, David Lechner, linux-arm-kernel
On 03/12/2019 15:09, Linus Walleij wrote:
> The TI LCDC picks a GPIO line from the device tree to use
> for DPMS power on/off. We can switch this to use a GPIO
> descriptor pretty easily. Make sure to request the GPIO
> "as is" so that the DPMS state that we start (boot) in is
> preserved.
>
Hmmm, I have been considering ditching this driver all together since no
mainline platform has ever used it. Also, if anybody ever wants to
connect tfp410 to tilcdc, he should use drm/bridge/ti-tfp410.c instead.
But since the patch is there, maybe I should pick it up, and remove the
bundled driver later a bit later.
BR,
Jyri
> Cc: Jyri Sarha <jsarha@ti.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: David Lechner <david@lechnology.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 30 ++++++++++++--------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
> index 530edb3b51cc..41cd9a7c4316 100644
> --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
> @@ -4,9 +4,8 @@
> * Author: Rob Clark <robdclark@gmail.com>
> */
>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/mod_devicetable.h>
> -#include <linux/of_gpio.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
>
> @@ -21,7 +20,7 @@
> struct tfp410_module {
> struct tilcdc_module base;
> struct i2c_adapter *i2c;
> - int gpio;
> + struct gpio_desc *power_gpiod;
> };
> #define to_tfp410_module(x) container_of(x, struct tfp410_module, base)
>
> @@ -58,10 +57,10 @@ static void tfp410_encoder_dpms(struct drm_encoder *encoder, int mode)
>
> if (mode == DRM_MODE_DPMS_ON) {
> DBG("Power on");
> - gpio_direction_output(tfp410_encoder->mod->gpio, 1);
> + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 1);
> } else {
> DBG("Power off");
> - gpio_direction_output(tfp410_encoder->mod->gpio, 0);
> + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 0);
> }
>
> tfp410_encoder->dpms = mode;
> @@ -318,17 +317,17 @@ static int tfp410_probe(struct platform_device *pdev)
>
> of_node_put(i2c_node);
>
> - tfp410_mod->gpio = of_get_named_gpio_flags(node, "powerdn-gpio",
> - 0, NULL);
> - if (tfp410_mod->gpio < 0) {
> - dev_warn(&pdev->dev, "No power down GPIO\n");
> - } else {
> - ret = gpio_request(tfp410_mod->gpio, "DVI_PDn");
> - if (ret) {
> - dev_err(&pdev->dev, "could not get DVI_PDn gpio\n");
> - goto fail_adapter;
> - }
> + tfp410_mod->power_gpiod = devm_gpiod_get_optional(&pdev->dev,
> + "powerdn",
> + GPIOD_ASIS);
> + if (IS_ERR(tfp410_mod->power_gpiod)) {
> + dev_err(&pdev->dev, "could not get DVI_PDn gpio\n");
> + goto fail_adapter;
> }
> + if (!tfp410_mod->power_gpiod)
> + dev_warn(&pdev->dev, "No power down GPIO\n");
> + else
> + gpiod_set_consumer_name(tfp410_mod->power_gpiod, "DVI_PDn");
>
> return 0;
>
> @@ -346,7 +345,6 @@ static int tfp410_remove(struct platform_device *pdev)
> struct tfp410_module *tfp410_mod = to_tfp410_module(mod);
>
> i2c_put_adapter(tfp410_mod->i2c);
> - gpio_free(tfp410_mod->gpio);
>
> tilcdc_module_cleanup(mod);
>
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/tilcdc: Switch to using GPIO descriptors
2019-12-03 18:29 ` Jyri Sarha
@ 2019-12-04 14:30 ` Sam Ravnborg
0 siblings, 0 replies; 4+ messages in thread
From: Sam Ravnborg @ 2019-12-04 14:30 UTC (permalink / raw)
To: Jyri Sarha
Cc: David Lechner, Maxime Ripard, Linus Walleij, Maarten Lankhorst,
dri-devel, Tomi Valkeinen, Sean Paul, linux-arm-kernel
Hi Jyri.
On Tue, Dec 03, 2019 at 08:29:45PM +0200, Jyri Sarha wrote:
> On 03/12/2019 15:09, Linus Walleij wrote:
> > The TI LCDC picks a GPIO line from the device tree to use
> > for DPMS power on/off. We can switch this to use a GPIO
> > descriptor pretty easily. Make sure to request the GPIO
> > "as is" so that the DPMS state that we start (boot) in is
> > preserved.
> >
>
> Hmmm, I have been considering ditching this driver all together since no
> mainline platform has ever used it. Also, if anybody ever wants to
> connect tfp410 to tilcdc, he should use drm/bridge/ti-tfp410.c instead.
>
> But since the patch is there, maybe I should pick it up, and remove the
> bundled driver later a bit later.
IMO much better to just get rid of it now - as there is anyway no users.
No reason to patch code that is essential dead.
You just postpone the task for no gain.
Sam
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-04 14:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-03 13:09 [PATCH] drm/tilcdc: Switch to using GPIO descriptors Linus Walleij
2019-12-03 15:50 ` David Lechner
2019-12-03 18:29 ` Jyri Sarha
2019-12-04 14:30 ` Sam Ravnborg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).