[PATCH AUTOSEL 5.4 052/350] drm/sun4i: dsi: Fix TCON DRQ set bits

[PATCH AUTOSEL 5.4 052/350] drm/sun4i: dsi: Fix TCON DRQ set bits

[Sasha Levin]

From: Jagan Teki <jagan@amarulasolutions.com>

[ Upstream commit 7ac6269968826f9cad61b501bb613cc5cadb7229 ]

The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.

           Active                 Front           Sync           Back
           Region                 Porch                          Porch
<-----------------------><----------------><--------------><-------------->
  //////////////////////|
 ////////////////////// |
//////////////////////  |..................                ................
                                           ________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>

<----- lcd_[xy] -------->		  <- lcd_[hv]spw ->
					  <---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>

The DSI driver misinterpreted the hbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the horizontal front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.

Including additional sync timings leads to flip_done timed out as:

WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0:                                     00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace b57eb1e5c64c6b8b ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out

With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.

Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 1636344ba9ec2..f83522717488a 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -437,9 +437,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 			     SUN6I_DSI_BURST_LINE_SYNC_POINT(SUN6I_DSI_SYNC_POINT));
 
 		val = SUN6I_DSI_TCON_DRQ_ENABLE_MODE;
-	} else if ((mode->hsync_end - mode->hdisplay) > 20) {
+	} else if ((mode->hsync_start - mode->hdisplay) > 20) {
 		/* Maaaaaagic */
-		u16 drq = (mode->hsync_end - mode->hdisplay) - 20;
+		u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
 
 		drq *= mipi_dsi_pixel_format_to_bpp(device->format);
 		drq /= 32;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 068/350] media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setup

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 3e84a18a259e1df35e5b549ab92ec3baf82ff010 ]

When probed after the HDMI notifier, calling cec_notifier_cec_adap_register()
calls the enable() adapter callback, but the HW is not yet set up.

Moving cec_notifier_cec_adap_register() right before cec_register_adapter()
fixes the following crash:
Ignoring spurious kernel translation fault at virtual address 0000000000000008
[...]
Hardware name: Khadas VIM (DT)
[...]
pc : __do_kernel_fault+0xdc/0x120
lr : __do_kernel_fault+0xdc/0x120
[...]
Call trace:
 __do_kernel_fault+0xdc/0x120
 do_page_fault+0x180/0x458
 do_translation_fault+0x64/0x70
 do_mem_abort+0x3c/0x98
 el1_da+0x20/0x94
 meson_ao_cec_adap_enable+0x30/0x218 [ao_cec]
 __cec_s_phys_addr+0x184/0x270
 cec_s_phys_addr+0x44/0x60
 cec_notifier_cec_adap_register+0x68/0x90
 meson_ao_cec_probe+0xb0/0x288 [ao_cec]
[...]
 el0_svc_compat+0x8/0x10

Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 20958f9d5c48 ("media: meson/ao-cec: use cec_notifier_cec_adap_(un)register")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/meson/ao-cec-g12a.c | 36 +++++++++++-----------
 drivers/media/platform/meson/ao-cec.c      | 30 +++++++++---------
 2 files changed, 33 insertions(+), 33 deletions(-)

diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
index 3b39e875292e4..3d8fe854feb0a 100644
--- a/drivers/media/platform/meson/ao-cec-g12a.c
+++ b/drivers/media/platform/meson/ao-cec-g12a.c
@@ -662,34 +662,27 @@ static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
 	if (IS_ERR(ao_cec->adap))
 		return PTR_ERR(ao_cec->adap);
 
-	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-							ao_cec->adap);
-	if (!ao_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_adapter;
-	}
-
 	ao_cec->adap->owner = THIS_MODULE;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base)) {
 		ret = PTR_ERR(base);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ao_cec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					       &meson_ao_cec_g12a_regmap_conf);
 	if (IS_ERR(ao_cec->regmap)) {
 		ret = PTR_ERR(ao_cec->regmap);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ao_cec->regmap_cec = devm_regmap_init(&pdev->dev, NULL, ao_cec,
 					   &meson_ao_cec_g12a_cec_regmap_conf);
 	if (IS_ERR(ao_cec->regmap_cec)) {
 		ret = PTR_ERR(ao_cec->regmap_cec);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	irq = platform_get_irq(pdev, 0);
@@ -699,45 +692,52 @@ static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
 					0, NULL, ao_cec);
 	if (ret) {
 		dev_err(&pdev->dev, "irq request failed\n");
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ao_cec->oscin = devm_clk_get(&pdev->dev, "oscin");
 	if (IS_ERR(ao_cec->oscin)) {
 		dev_err(&pdev->dev, "oscin clock request failed\n");
 		ret = PTR_ERR(ao_cec->oscin);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ret = meson_ao_cec_g12a_setup_clk(ao_cec);
 	if (ret)
-		goto out_probe_notify;
+		goto out_probe_adapter;
 
 	ret = clk_prepare_enable(ao_cec->core);
 	if (ret) {
 		dev_err(&pdev->dev, "core clock enable failed\n");
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	device_reset_optional(&pdev->dev);
 
 	platform_set_drvdata(pdev, ao_cec);
 
+	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+							ao_cec->adap);
+	if (!ao_cec->notify) {
+		ret = -ENOMEM;
+		goto out_probe_core_clk;
+	}
+
 	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
 	if (ret < 0)
-		goto out_probe_core_clk;
+		goto out_probe_notify;
 
 	/* Setup Hardware */
 	regmap_write(ao_cec->regmap, CECB_GEN_CNTL_REG, CECB_GEN_CNTL_RESET);
 
 	return 0;
 
-out_probe_core_clk:
-	clk_disable_unprepare(ao_cec->core);
-
 out_probe_notify:
 	cec_notifier_cec_adap_unregister(ao_cec->notify);
 
+out_probe_core_clk:
+	clk_disable_unprepare(ao_cec->core);
+
 out_probe_adapter:
 	cec_delete_adapter(ao_cec->adap);
 
diff --git a/drivers/media/platform/meson/ao-cec.c b/drivers/media/platform/meson/ao-cec.c
index 64ed549bf0120..03600e8b3ef00 100644
--- a/drivers/media/platform/meson/ao-cec.c
+++ b/drivers/media/platform/meson/ao-cec.c
@@ -624,20 +624,13 @@ static int meson_ao_cec_probe(struct platform_device *pdev)
 	if (IS_ERR(ao_cec->adap))
 		return PTR_ERR(ao_cec->adap);
 
-	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
-							ao_cec->adap);
-	if (!ao_cec->notify) {
-		ret = -ENOMEM;
-		goto out_probe_adapter;
-	}
-
 	ao_cec->adap->owner = THIS_MODULE;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ao_cec->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(ao_cec->base)) {
 		ret = PTR_ERR(ao_cec->base);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	irq = platform_get_irq(pdev, 0);
@@ -647,20 +640,20 @@ static int meson_ao_cec_probe(struct platform_device *pdev)
 					0, NULL, ao_cec);
 	if (ret) {
 		dev_err(&pdev->dev, "irq request failed\n");
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ao_cec->core = devm_clk_get(&pdev->dev, "core");
 	if (IS_ERR(ao_cec->core)) {
 		dev_err(&pdev->dev, "core clock request failed\n");
 		ret = PTR_ERR(ao_cec->core);
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ret = clk_prepare_enable(ao_cec->core);
 	if (ret) {
 		dev_err(&pdev->dev, "core clock enable failed\n");
-		goto out_probe_notify;
+		goto out_probe_adapter;
 	}
 
 	ret = clk_set_rate(ao_cec->core, CEC_CLK_RATE);
@@ -674,9 +667,16 @@ static int meson_ao_cec_probe(struct platform_device *pdev)
 	ao_cec->pdev = pdev;
 	platform_set_drvdata(pdev, ao_cec);
 
+	ao_cec->notify = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+							ao_cec->adap);
+	if (!ao_cec->notify) {
+		ret = -ENOMEM;
+		goto out_probe_clk;
+	}
+
 	ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
 	if (ret < 0)
-		goto out_probe_clk;
+		goto out_probe_notify;
 
 	/* Setup Hardware */
 	writel_relaxed(CEC_GEN_CNTL_RESET,
@@ -684,12 +684,12 @@ static int meson_ao_cec_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_probe_clk:
-	clk_disable_unprepare(ao_cec->core);
-
 out_probe_notify:
 	cec_notifier_cec_adap_unregister(ao_cec->notify);
 
+out_probe_clk:
+	clk_disable_unprepare(ao_cec->core);
+
 out_probe_adapter:
 	cec_delete_adapter(ao_cec->adap);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit b2662a164f9dc48da8822e56600686d639056282 ]

In DMA mode we have a maximum transfer size, past that the driver
falls back to PIO (see the check at the top of pxa2xx_spi_transfer_one).
Falling back to PIO for big transfers defeats the point of a dma engine,
hence set the max transfer size to inform spi clients that they need
to do something smarter.

This was uncovered by the drm_mipi_dbi spi panel code, which does
large spi transfers, but stopped splitting them after:

commit e143364b4c1774f68e923a5a0bb0fca28ac25888
Author: Noralf Trønnes <noralf@tronnes.org>
Date:   Fri Jul 19 17:59:10 2019 +0200

    drm/tinydrm: Remove tinydrm_spi_max_transfer_size()

After this commit the code relied on the spi core to split transfers
into max dma-able blocks, which also papered over the PIO fallback issue.

Fix this by setting the overall max transfer size to the DMA limit,
but only when the controller runs in DMA mode.

Fixes: e143364b4c17 ("drm/tinydrm: Remove tinydrm_spi_max_transfer_size()")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Reported-and-tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20191017064426.30814-1-daniel.vetter@ffwll.ch
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f9..068c210376799 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1602,6 +1602,11 @@ static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller,
 	return cs;
 }
 
+static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi)
+{
+	return MAX_DMA_LEN;
+}
+
 static int pxa2xx_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1707,6 +1712,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 		} else {
 			controller->can_dma = pxa2xx_spi_can_dma;
 			controller->max_dma_len = MAX_DMA_LEN;
+			controller->max_transfer_size =
+				pxa2xx_spi_max_dma_transfer_size;
 		}
 	}
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 144/350] media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro

[Sasha Levin]

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

[ Upstream commit 06eff2150d4db991ca236f3d05a9dc0101475aea ]

We need to shift and mask values at different occasions to fill up
cedrus registers. This was done using macros that don't explicitly
treat arguments as unsigned, leading to possibly undefined behavior.

Introduce the SHIFT_AND_MASK_BITS macro and use it where possible.
In cases where it doesn't apply as-is, explicitly cast to unsigned
instead.

This macro should be moved to include/linux/bits.h eventually.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../staging/media/sunxi/cedrus/cedrus_regs.h  | 31 ++++++++++---------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_regs.h b/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
index ddd29788d685b..f9dd8cbf34582 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
@@ -10,6 +10,9 @@
 #ifndef _CEDRUS_REGS_H_
 #define _CEDRUS_REGS_H_
 
+#define SHIFT_AND_MASK_BITS(v, h, l) \
+	(((unsigned long)(v) << (l)) & GENMASK(h, l))
+
 /*
  * Common acronyms and contractions used in register descriptions:
  * * VLD : Variable-Length Decoder
@@ -37,8 +40,8 @@
 #define VE_PRIMARY_CHROMA_BUF_LEN		0xc4
 #define VE_PRIMARY_FB_LINE_STRIDE		0xc8
 
-#define VE_PRIMARY_FB_LINE_STRIDE_CHROMA(s)	(((s) << 16) & GENMASK(31, 16))
-#define VE_PRIMARY_FB_LINE_STRIDE_LUMA(s)	(((s) << 0) & GENMASK(15, 0))
+#define VE_PRIMARY_FB_LINE_STRIDE_CHROMA(s)	SHIFT_AND_MASK_BITS(s, 31, 16)
+#define VE_PRIMARY_FB_LINE_STRIDE_LUMA(s)	SHIFT_AND_MASK_BITS(s, 15, 0)
 
 #define VE_CHROMA_BUF_LEN			0xe8
 
@@ -46,7 +49,7 @@
 #define VE_SECONDARY_OUT_FMT_EXT		(0x01 << 30)
 #define VE_SECONDARY_OUT_FMT_YU12		(0x02 << 30)
 #define VE_SECONDARY_OUT_FMT_YV12		(0x03 << 30)
-#define VE_CHROMA_BUF_LEN_SDRT(l)		((l) & GENMASK(27, 0))
+#define VE_CHROMA_BUF_LEN_SDRT(l)		SHIFT_AND_MASK_BITS(l, 27, 0)
 
 #define VE_PRIMARY_OUT_FMT			0xec
 
@@ -69,15 +72,15 @@
 
 #define VE_DEC_MPEG_MP12HDR			(VE_ENGINE_DEC_MPEG + 0x00)
 
-#define VE_DEC_MPEG_MP12HDR_SLICE_TYPE(t)	(((t) << 28) & GENMASK(30, 28))
+#define VE_DEC_MPEG_MP12HDR_SLICE_TYPE(t)	SHIFT_AND_MASK_BITS(t, 30, 28)
 #define VE_DEC_MPEG_MP12HDR_F_CODE_SHIFT(x, y)	(24 - 4 * (y) - 8 * (x))
 #define VE_DEC_MPEG_MP12HDR_F_CODE(__x, __y, __v) \
-	(((__v) & GENMASK(3, 0)) << VE_DEC_MPEG_MP12HDR_F_CODE_SHIFT(__x, __y))
+	(((unsigned long)(__v) & GENMASK(3, 0)) << VE_DEC_MPEG_MP12HDR_F_CODE_SHIFT(__x, __y))
 
 #define VE_DEC_MPEG_MP12HDR_INTRA_DC_PRECISION(p) \
-	(((p) << 10) & GENMASK(11, 10))
+	SHIFT_AND_MASK_BITS(p, 11, 10)
 #define VE_DEC_MPEG_MP12HDR_INTRA_PICTURE_STRUCTURE(s) \
-	(((s) << 8) & GENMASK(9, 8))
+	SHIFT_AND_MASK_BITS(s, 9, 8)
 #define VE_DEC_MPEG_MP12HDR_TOP_FIELD_FIRST(v) \
 	((v) ? BIT(7) : 0)
 #define VE_DEC_MPEG_MP12HDR_FRAME_PRED_FRAME_DCT(v) \
@@ -98,19 +101,19 @@
 #define VE_DEC_MPEG_PICCODEDSIZE		(VE_ENGINE_DEC_MPEG + 0x08)
 
 #define VE_DEC_MPEG_PICCODEDSIZE_WIDTH(w) \
-	((DIV_ROUND_UP((w), 16) << 8) & GENMASK(15, 8))
+	SHIFT_AND_MASK_BITS(DIV_ROUND_UP((w), 16), 15, 8)
 #define VE_DEC_MPEG_PICCODEDSIZE_HEIGHT(h) \
-	((DIV_ROUND_UP((h), 16) << 0) & GENMASK(7, 0))
+	SHIFT_AND_MASK_BITS(DIV_ROUND_UP((h), 16), 7, 0)
 
 #define VE_DEC_MPEG_PICBOUNDSIZE		(VE_ENGINE_DEC_MPEG + 0x0c)
 
-#define VE_DEC_MPEG_PICBOUNDSIZE_WIDTH(w)	(((w) << 16) & GENMASK(27, 16))
-#define VE_DEC_MPEG_PICBOUNDSIZE_HEIGHT(h)	(((h) << 0) & GENMASK(11, 0))
+#define VE_DEC_MPEG_PICBOUNDSIZE_WIDTH(w)	SHIFT_AND_MASK_BITS(w, 27, 16)
+#define VE_DEC_MPEG_PICBOUNDSIZE_HEIGHT(h)	SHIFT_AND_MASK_BITS(h, 11, 0)
 
 #define VE_DEC_MPEG_MBADDR			(VE_ENGINE_DEC_MPEG + 0x10)
 
-#define VE_DEC_MPEG_MBADDR_X(w)			(((w) << 8) & GENMASK(15, 8))
-#define VE_DEC_MPEG_MBADDR_Y(h)			(((h) << 0) & GENMASK(7, 0))
+#define VE_DEC_MPEG_MBADDR_X(w)			SHIFT_AND_MASK_BITS(w, 15, 8)
+#define VE_DEC_MPEG_MBADDR_Y(h)			SHIFT_AND_MASK_BITS(h, 7, 0)
 
 #define VE_DEC_MPEG_CTRL			(VE_ENGINE_DEC_MPEG + 0x14)
 
@@ -225,7 +228,7 @@
 #define VE_DEC_MPEG_IQMINPUT_FLAG_INTRA		(0x01 << 14)
 #define VE_DEC_MPEG_IQMINPUT_FLAG_NON_INTRA	(0x00 << 14)
 #define VE_DEC_MPEG_IQMINPUT_WEIGHT(i, v) \
-	(((v) & GENMASK(7, 0)) | (((i) << 8) & GENMASK(13, 8)))
+	(SHIFT_AND_MASK_BITS(i, 13, 8) | SHIFT_AND_MASK_BITS(v, 7, 0))
 
 #define VE_DEC_MPEG_ERROR			(VE_ENGINE_DEC_MPEG + 0xc4)
 #define VE_DEC_MPEG_CRTMBADDR			(VE_ENGINE_DEC_MPEG + 0xc8)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 145/350] media: aspeed: set hsync and vsync polarities to normal before starting mode detection

[Sasha Levin]

From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

[ Upstream commit 5b3f3c41c5c791c1c22cd91655e7ef4b2a1dff7c ]

Sometimes it detects a weird resolution such as 1024x287 when the
actual resolution is 1024x768. To resolve such an issue, this
commit adds clearing for hsync and vsync polarity register bits
at the beginning of the first mode detection. This is recommended
in the datasheet.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/aspeed-video.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index eb12f37930629..84e0650106f51 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -741,6 +741,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 		}
 
 		set_bit(VIDEO_RES_DETECT, &video->flags);
+		aspeed_video_update(video, VE_CTRL,
+				    VE_CTRL_VSYNC_POL | VE_CTRL_HSYNC_POL, 0);
 		aspeed_video_enable_mode_detect(video);
 
 		rc = wait_event_interruptible_timeout(video->wait,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 151/350] media: imx7-mipi-csis: Add a check for devm_regulator_get

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit a0219deefe9ee5006a28d48522f76b217d198c51 ]

devm_regulator_get may return an error but mipi_csis_phy_init misses
a check for it.
This may lead to problems when regulator_set_voltage uses the unchecked
pointer.
This patch adds a check for devm_regulator_get to avoid potential risk.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 73d8354e618c4..e50b1f88e25b5 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -350,6 +350,8 @@ static void mipi_csis_sw_reset(struct csi_state *state)
 static int mipi_csis_phy_init(struct csi_state *state)
 {
 	state->mipi_phy_regulator = devm_regulator_get(state->dev, "phy");
+	if (IS_ERR(state->mipi_phy_regulator))
+		return PTR_ERR(state->mipi_phy_regulator);
 
 	return regulator_set_voltage(state->mipi_phy_regulator, 1000000,
 				     1000000);
@@ -966,7 +968,10 @@ static int mipi_csis_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	mipi_csis_phy_init(state);
+	ret = mipi_csis_phy_init(state);
+	if (ret < 0)
+		return ret;
+
 	mipi_csis_phy_reset(state);
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 152/350] media: aspeed: clear garbage interrupts

[Sasha Levin]

From: Jae Hyun Yoo <jae.hyun.yoo@intel.com>

[ Upstream commit 65d270acb2d662c3346793663ac3a759eb4491b8 ]

CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these
are disabled in the VE_INTERRUPT_CTRL register and eventually this
behavior causes disabling irq itself like below:

[10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option)
[10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G        W         5.3.0-4fde000-dirty-d683e2e #1
[10055.124565] Hardware name: Generic DT based system
[10055.129355] Backtrace:
[10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24)
[10055.139431]  r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00
[10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28)
[10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0)
[10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294)
[10055.168374]  r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00
[10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98)
[10055.184835]  r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002
[10055.192657]  r4:9d51dc00 r3:00000000
[10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c)
[10055.205113]  r5:80b56d50 r4:9d51dc00
[10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c)
[10055.217037]  r5:80b56d50 r4:9d51dc00
[10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44)
[10055.229052]  r5:80b56d50 r4:00000017
[10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4)
[10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70)
[10055.249797]  r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380
[10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80)
[10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8)
[10055.270152] 3fa0:                                     015d0530 00000000 00000000 015d0538
[10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918
[10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff
[10055.293104]  r5:20000010 r4:76a3a08c
[10055.296673] handlers:
[10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq
[10055.307344] Disabling IRQ #23

To fix this issue, this commit makes the interrupt handler clear
these garbage interrupts. This driver enables and uses only
COMP_COMPLETE interrupt instead for frame handling.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/aspeed-video.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 84e0650106f51..096a7c9a8963b 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -606,6 +606,16 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 			aspeed_video_start_frame(video);
 	}
 
+	/*
+	 * CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these
+	 * are disabled in the VE_INTERRUPT_CTRL register so clear them to
+	 * prevent unnecessary interrupt calls.
+	 */
+	if (sts & VE_INTERRUPT_CAPTURE_COMPLETE)
+		sts &= ~VE_INTERRUPT_CAPTURE_COMPLETE;
+	if (sts & VE_INTERRUPT_FRAME_COMPLETE)
+		sts &= ~VE_INTERRUPT_FRAME_COMPLETE;
+
 	return sts ? IRQ_NONE : IRQ_HANDLED;
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 159/350] arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()

[Sasha Levin]

From: Yunfeng Ye <yeyunfeng@huawei.com>

[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ]

In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.

Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.

In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/psci.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index c9f72b2665f1c..43ae4e0c968f6 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -81,7 +81,8 @@ static void cpu_psci_cpu_die(unsigned int cpu)
 
 static int cpu_psci_cpu_kill(unsigned int cpu)
 {
-	int err, i;
+	int err;
+	unsigned long start, end;
 
 	if (!psci_ops.affinity_info)
 		return 0;
@@ -91,16 +92,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu)
 	 * while it is dying. So, try again a few times.
 	 */
 
-	for (i = 0; i < 10; i++) {
+	start = jiffies;
+	end = start + msecs_to_jiffies(100);
+	do {
 		err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
 		if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
-			pr_info("CPU%d killed.\n", cpu);
+			pr_info("CPU%d killed (polled %d ms)\n", cpu,
+				jiffies_to_msecs(jiffies - start));
 			return 0;
 		}
 
-		msleep(10);
-		pr_info("Retrying again to check for CPU kill\n");
-	}
+		usleep_range(100, 1000);
+	} while (time_before(jiffies, end));
 
 	pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
 			cpu, err);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 197/350] ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit f9ad75468453b019b92c5296e6a04bf7c37f49e4 ]

updated solution to the problem reported with randconfig:

CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:

sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'

use def_trisate to propagate the right settings without select.

Fixes: f4df4e4042b0 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a1f ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/imx/Kconfig | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
index 5acae75f5750d..71f318bc2c74f 100644
--- a/sound/soc/sof/imx/Kconfig
+++ b/sound/soc/sof/imx/Kconfig
@@ -11,8 +11,8 @@ config SND_SOC_SOF_IMX_TOPLEVEL
 
 if SND_SOC_SOF_IMX_TOPLEVEL
 
-config SND_SOC_SOF_IMX8
-	tristate "SOF support for i.MX8"
+config SND_SOC_SOF_IMX8_SUPPORT
+	bool "SOF support for i.MX8"
 	depends on IMX_SCU
 	depends on IMX_DSP
 	help
@@ -20,4 +20,8 @@ config SND_SOC_SOF_IMX8
           Say Y if you have such a device.
           If unsure select "N".
 
+config SND_SOC_SOF_IMX8
+	def_tristate SND_SOC_SOF_OF
+	depends on SND_SOC_SOF_IMX8_SUPPORT
+
 endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 201/350] cpufreq: sun50i: Fix CPU speed bin detection

[Sasha Levin]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit c23734487fb44ee16c1b007ba72d793c085e4ec4 ]

I have observed failures to boot on Orange Pi 3, because this driver
determined that my SoC is from the normal bin, but my SoC only works
reliably with the OPP values for the slowest bin.

By querying H6 owners, it was found that e-fuse values found in the wild
are in the range of 1-3, value of 7 was not reported, yet. From this and
from unused defines in BSP code, it can be assumed that meaning of efuse
values on H6 actually is:

- 1 = slowest bin
- 2 = normal bin
- 3 = fastest bin

Vendor code actually treats 0 and 2 as invalid efuse values, but later
treats all invalid values as a normal bin. This looks like a mistake in
bin detection code, that was plastered over by a hack in cpufreq code,
so let's not repeat it here. It probably only works because there are no
SoCs in the wild with efuse value of 0, and fast bin SoCs are made to
use normal bin OPP tables, which is also safe.

Let's play it safe and interpret 0 as the slowest bin, but fix detection
of other bins to match this research. More research will be done before
actual OPP tables are merged.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/sun50i-cpufreq-nvmem.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index eca32e443716c..9907a165135b7 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -25,7 +25,7 @@
 static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
 
 /**
- * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * sun50i_cpufreq_get_efuse() - Determine speed grade from efuse value
  * @versions: Set to the value parsed from efuse
  *
  * Returns 0 if success.
@@ -69,21 +69,16 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
 		return PTR_ERR(speedbin);
 
 	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
-	switch (efuse_value) {
-	case 0b0001:
-		*versions = 1;
-		break;
-	case 0b0011:
-		*versions = 2;
-		break;
-	default:
-		/*
-		 * For other situations, we treat it as bin0.
-		 * This vf table can be run for any good cpu.
-		 */
+
+	/*
+	 * We treat unexpected efuse values as if the SoC was from
+	 * the slowest bin. Expected efuse values are 1-3, slowest
+	 * to fastest.
+	 */
+	if (efuse_value >= 1 && efuse_value <= 3)
+		*versions = efuse_value - 1;
+	else
 		*versions = 0;
-		break;
-	}
 
 	kfree(speedbin);
 	return 0;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 205/350] media: staging/imx: Use a shorter name for driver

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit ce22c6f242b6d7b5e0318da2c92b5b00b5bbc698 ]

Currently v4l2-compliance tool returns the following output:

Compliance test for imx-media-captu device /dev/video0:

Driver Info:
        Driver name      : imx-media-captu
        Card type        : imx-media-capture
...

The driver name string is limited to 16 characters, so provide
a shorter name so that we can have a better output.

While at it, use the same shorter name for driver and card.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-capture.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/imx/imx-media-capture.c b/drivers/staging/media/imx/imx-media-capture.c
index b33a07bc9105d..46576e32581f0 100644
--- a/drivers/staging/media/imx/imx-media-capture.c
+++ b/drivers/staging/media/imx/imx-media-capture.c
@@ -26,6 +26,8 @@
 #include <media/imx.h>
 #include "imx-media.h"
 
+#define IMX_CAPTURE_NAME "imx-capture"
+
 struct capture_priv {
 	struct imx_media_video_dev vdev;
 
@@ -69,8 +71,8 @@ static int vidioc_querycap(struct file *file, void *fh,
 {
 	struct capture_priv *priv = video_drvdata(file);
 
-	strscpy(cap->driver, "imx-media-capture", sizeof(cap->driver));
-	strscpy(cap->card, "imx-media-capture", sizeof(cap->card));
+	strscpy(cap->driver, IMX_CAPTURE_NAME, sizeof(cap->driver));
+	strscpy(cap->card, IMX_CAPTURE_NAME, sizeof(cap->card));
 	snprintf(cap->bus_info, sizeof(cap->bus_info),
 		 "platform:%s", priv->src_sd->name);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 206/350] nvmem: imx-ocotp: reset error status on probe

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit c33c585f1b3a99d53920bdac614aca461d8db06f ]

If software running before the OCOTP driver is loaded left the
controller with the error status pending, the driver will never
be able to complete the read timing setup. Reset the error status
on probe to make sure the controller is in usable state.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/imx-ocotp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index dff2f3c357f56..fc40555ca4cdd 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -521,6 +521,10 @@ static int imx_ocotp_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk))
 		return PTR_ERR(priv->clk);
 
+	clk_prepare_enable(priv->clk);
+	imx_ocotp_clr_err_if_set(priv->base);
+	clk_disable_unprepare(priv->clk);
+
 	priv->params = of_device_get_match_data(&pdev->dev);
 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
 	imx_ocotp_nvmem_config.dev = dev;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 219/350] perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 9d604aad4bb022e848dec80d6fe5f73fe87061a2 ]

Macro TO_CS_QUEUE_NR definition has a typo, which uses 'trace_id_chan'
as its parameter, this doesn't match with its definition body which uses
'trace_chan_id'.  So renames the parameter to 'trace_chan_id'.

It's luck to have a local variable 'trace_chan_id' in the function
cs_etm__setup_queue(), even we wrongly define the macro TO_CS_QUEUE_NR,
the local variable 'trace_chan_id' is used rather than the macro's
parameter 'trace_id_chan'; so the compiler doesn't complain for this
before.

After renaming the parameter, it leads to a compiling error due
cs_etm__setup_queue() has no variable 'trace_id_chan'.  This patch uses
the variable 'trace_chan_id' for the macro so that fixes the compiling
error.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20191021074808.25795-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/cs-etm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 4ba0f871f086d..f5f855fff412e 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -110,7 +110,7 @@ static int cs_etm__decode_data_block(struct cs_etm_queue *etmq);
  * encode the etm queue number as the upper 16 bit and the channel as
  * the lower 16 bit.
  */
-#define TO_CS_QUEUE_NR(queue_nr, trace_id_chan)	\
+#define TO_CS_QUEUE_NR(queue_nr, trace_chan_id)	\
 		      (queue_nr << 16 | trace_chan_id)
 #define TO_QUEUE_NR(cs_queue_nr) (cs_queue_nr >> 16)
 #define TO_TRACE_CHAN_ID(cs_queue_nr) (cs_queue_nr & 0x0000ffff)
@@ -819,7 +819,7 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm,
 	 * Note that packets decoded above are still in the traceID's packet
 	 * queue and will be processed in cs_etm__process_queues().
 	 */
-	cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_id_chan);
+	cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_chan_id);
 	ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, timestamp);
 out:
 	return ret;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 228/350] perf tools: Fix cross compile for ARM64

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 71f699078b154fcb1c9162fd0208ada9ce532ffc ]

Currently when cross compiling perf tool for ARM64 on my x86 machine I
get this error:

  arch/arm64/util/sym-handling.c:9:10: fatal error: gelf.h: No such file or directory
   #include <gelf.h>

For the build, libelf is reported off:

  Auto-detecting system features:
  ...
  ...                        libelf: [ OFF ]

Indeed, test-libelf is not built successfully:

  more ./build/feature/test-libelf.make.output
  test-libelf.c:2:10: fatal error: libelf.h: No such file or directory
   #include <libelf.h>
          ^~~~~~~~~~
  compilation terminated.

I have no such problems natively compiling on ARM64, and I did not
previously have this issue for cross compiling. Fix by relocating the
gelf.h include.

Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1573045254-39833-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/arm64/util/sym-handling.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/arch/arm64/util/sym-handling.c b/tools/perf/arch/arm64/util/sym-handling.c
index 5df7889851305..8dfa3e5229f1b 100644
--- a/tools/perf/arch/arm64/util/sym-handling.c
+++ b/tools/perf/arch/arm64/util/sym-handling.c
@@ -6,9 +6,10 @@
 
 #include "symbol.h" // for the elf__needs_adjust_symbols() prototype
 #include <stdbool.h>
-#include <gelf.h>
 
 #ifdef HAVE_LIBELF_SUPPORT
+#include <gelf.h>
+
 bool elf__needs_adjust_symbols(GElf_Ehdr ehdr)
 {
 	return ehdr.e_type == ET_EXEC ||
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 247/350] media: exynos4-is: fix wrong mdev and v4l2 dev order in error path

[Sasha Levin]

From: Seung-Woo Kim <sw0312.kim@samsung.com>

[ Upstream commit 4d741cbd58bf889c8a68cf6e592a7892b5c2802e ]

When driver is built as module and probe during insmod is deferred
because of sensor subdevs, there is NULL pointer deference because
mdev is cleaned up and then access it from v4l2_device_unregister().
Fix the wrong mdev and v4l2 dev order in error path of probe.

This fixes below null pointer deference:
   Unable to handle kernel NULL pointer dereference at virtual address 00000000
   pgd = ca026f68
   [00000000] *pgd=00000000
   Internal error: Oops: 5 [#1] PREEMPT SMP ARM
   [...]
   Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
   PC is at ida_free+0x7c/0x160
   LR is at xas_start+0x44/0x204
   [...]
   [<c0dafd60>] (ida_free) from [<c083c20c>] (__media_device_unregister_entity+0x18/0xc0)
   [<c083c20c>] (__media_device_unregister_entity) from [<c083c2e0>] (media_device_unregister_entity+0x2c/0x38)
   [<c083c2e0>] (media_device_unregister_entity) from [<c0843404>] (v4l2_device_release+0xd0/0x104)
   [<c0843404>] (v4l2_device_release) from [<c0632558>] (device_release+0x28/0x98)
   [<c0632558>] (device_release) from [<c0db1204>] (kobject_put+0xa4/0x208)
   [<c0db1204>] (kct_put) from [<bf00bac4>] (fimc_capture_subdev_unregistered+0x58/0x6c [s5p_fimc])
   [<bf00bac4>] (fimc_capture_subdev_unregistered [s5p_fimc]) from [<c084a1cc>] (v4l2_device_unregister_subdev+0x6c/0xa8)
   [<c084a1cc>] (v4l2_device_unregister_subdev) from [<c084a350>] (v4l2_device_unregister+0x64/0x94)
   [<c084a350>] (v4l2_device_unregister) from [<bf0101ac>] (fimc_md_probe+0x4ec/0xaf8 [s5p_fimc])
   [...]

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Fixes: 9832e155f1ed ("[media] media-device: split media initialization and registration")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/media-dev.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index a838189d44902..9aaf3b8060d50 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1457,12 +1457,12 @@ static int fimc_md_probe(struct platform_device *pdev)
 	ret = v4l2_device_register(dev, &fmd->v4l2_dev);
 	if (ret < 0) {
 		v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
-		return ret;
+		goto err_md;
 	}
 
 	ret = fimc_md_get_clocks(fmd);
 	if (ret)
-		goto err_md;
+		goto err_v4l2dev;
 
 	ret = fimc_md_get_pinctrl(fmd);
 	if (ret < 0) {
@@ -1519,9 +1519,10 @@ static int fimc_md_probe(struct platform_device *pdev)
 	fimc_md_unregister_entities(fmd);
 err_clk:
 	fimc_md_put_clocks(fmd);
+err_v4l2dev:
+	v4l2_device_unregister(&fmd->v4l2_dev);
 err_md:
 	media_device_cleanup(&fmd->media_dev);
-	v4l2_device_unregister(&fmd->v4l2_dev);
 	return ret;
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 254/350] crypto: atmel - Fix authenc support when it is set to m

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 1520c72596dde7f22b8bd6bed3ef7df2b8b7ef39 ]

As it is if CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is set to m it is in
effect disabled.  This patch fixes it by using IS_ENABLED instead
of ifdef.

Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/atmel-aes.c     | 18 +++++++++---------
 drivers/crypto/atmel-authenc.h |  2 +-
 drivers/crypto/atmel-sha.c     |  2 +-
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c
index 026f193556f9d..b85a516614d86 100644
--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -145,7 +145,7 @@ struct atmel_aes_xts_ctx {
 	u32			key2[AES_KEYSIZE_256 / sizeof(u32)];
 };
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 struct atmel_aes_authenc_ctx {
 	struct atmel_aes_base_ctx	base;
 	struct atmel_sha_authenc_ctx	*auth;
@@ -157,7 +157,7 @@ struct atmel_aes_reqctx {
 	u32			lastc[AES_BLOCK_SIZE / sizeof(u32)];
 };
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 struct atmel_aes_authenc_reqctx {
 	struct atmel_aes_reqctx	base;
 
@@ -486,13 +486,13 @@ static inline bool atmel_aes_is_encrypt(const struct atmel_aes_dev *dd)
 	return (dd->flags & AES_FLAGS_ENCRYPT);
 }
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 static void atmel_aes_authenc_complete(struct atmel_aes_dev *dd, int err);
 #endif
 
 static inline int atmel_aes_complete(struct atmel_aes_dev *dd, int err)
 {
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 	if (dd->ctx->is_aead)
 		atmel_aes_authenc_complete(dd, err);
 #endif
@@ -1973,7 +1973,7 @@ static struct crypto_alg aes_xts_alg = {
 	}
 };
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 /* authenc aead functions */
 
 static int atmel_aes_authenc_start(struct atmel_aes_dev *dd);
@@ -2460,7 +2460,7 @@ static void atmel_aes_unregister_algs(struct atmel_aes_dev *dd)
 {
 	int i;
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 	if (dd->caps.has_authenc)
 		for (i = 0; i < ARRAY_SIZE(aes_authenc_algs); i++)
 			crypto_unregister_aead(&aes_authenc_algs[i]);
@@ -2507,7 +2507,7 @@ static int atmel_aes_register_algs(struct atmel_aes_dev *dd)
 			goto err_aes_xts_alg;
 	}
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 	if (dd->caps.has_authenc) {
 		for (i = 0; i < ARRAY_SIZE(aes_authenc_algs); i++) {
 			err = crypto_register_aead(&aes_authenc_algs[i]);
@@ -2519,7 +2519,7 @@ static int atmel_aes_register_algs(struct atmel_aes_dev *dd)
 
 	return 0;
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 	/* i = ARRAY_SIZE(aes_authenc_algs); */
 err_aes_authenc_alg:
 	for (j = 0; j < i; j++)
@@ -2709,7 +2709,7 @@ static int atmel_aes_probe(struct platform_device *pdev)
 
 	atmel_aes_get_cap(aes_dd);
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 	if (aes_dd->caps.has_authenc && !atmel_sha_authenc_is_ready()) {
 		err = -EPROBE_DEFER;
 		goto iclk_unprepare;
diff --git a/drivers/crypto/atmel-authenc.h b/drivers/crypto/atmel-authenc.h
index cbd37a2edadaf..d6de810df44fe 100644
--- a/drivers/crypto/atmel-authenc.h
+++ b/drivers/crypto/atmel-authenc.h
@@ -12,7 +12,7 @@
 #ifndef __ATMEL_AUTHENC_H__
 #define __ATMEL_AUTHENC_H__
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 
 #include <crypto/authenc.h>
 #include <crypto/hash.h>
diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index 84cb8748a7959..d32626458e67c 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -2212,7 +2212,7 @@ static struct ahash_alg sha_hmac_algs[] = {
 },
 };
 
-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC
+#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)
 /* authenc functions */
 
 static int atmel_sha_authenc_init2(struct atmel_sha_dev *dd);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 258/350] media: cedrus: Use helpers to access capture queue

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 1fd50a2c294457508f06b8b631d01a58de81cdd2 ]

Accessing capture queue structue directly is not safe. Use helpers for
that.

Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus.h      | 8 ++++++--
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.h b/drivers/staging/media/sunxi/cedrus/cedrus.h
index 2f017a6518486..3758a1c4e2d05 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.h
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.h
@@ -179,12 +179,16 @@ static inline dma_addr_t cedrus_buf_addr(struct vb2_buffer *buf,
 static inline dma_addr_t cedrus_dst_buf_addr(struct cedrus_ctx *ctx,
 					     int index, unsigned int plane)
 {
-	struct vb2_buffer *buf;
+	struct vb2_buffer *buf = NULL;
+	struct vb2_queue *vq;
 
 	if (index < 0)
 		return 0;
 
-	buf = ctx->fh.m2m_ctx->cap_q_ctx.q.bufs[index];
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	if (vq)
+		buf = vb2_get_buffer(vq, index);
+
 	return buf ? cedrus_buf_addr(buf, &ctx->dst_fmt, plane) : 0;
 }
 
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index d6a782703c9b0..08c6c9c410cc3 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -96,7 +96,7 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 	const struct v4l2_ctrl_h264_decode_params *decode = run->h264.decode_params;
 	const struct v4l2_ctrl_h264_slice_params *slice = run->h264.slice_params;
 	const struct v4l2_ctrl_h264_sps *sps = run->h264.sps;
-	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
+	struct vb2_queue *cap_q;
 	struct cedrus_buffer *output_buf;
 	struct cedrus_dev *dev = ctx->dev;
 	unsigned long used_dpbs = 0;
@@ -104,6 +104,8 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 	unsigned int output = 0;
 	unsigned int i;
 
+	cap_q = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
 	memset(pic_list, 0, sizeof(pic_list));
 
 	for (i = 0; i < ARRAY_SIZE(decode->dpb); i++) {
@@ -167,12 +169,14 @@ static void _cedrus_write_ref_list(struct cedrus_ctx *ctx,
 				   enum cedrus_h264_sram_off sram)
 {
 	const struct v4l2_ctrl_h264_decode_params *decode = run->h264.decode_params;
-	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
+	struct vb2_queue *cap_q;
 	struct cedrus_dev *dev = ctx->dev;
 	u8 sram_array[CEDRUS_MAX_REF_IDX];
 	unsigned int i;
 	size_t size;
 
+	cap_q = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
 	memset(sram_array, 0, sizeof(sram_array));
 
 	for (i = 0; i < num_ref; i++) {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 264/350] spi: pxa2xx: Add missed security checks

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ]

pxa2xx_spi_init_pdata misses checks for devm_clk_get and
platform_get_irq.
Add checks for them to fix the bugs.

Since ssp->clk and ssp->irq are used in probe, they are mandatory here.
So we cannot use _optional() for devm_clk_get and platform_get_irq.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 068c210376799..452cef367696d 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1565,7 +1565,13 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
 #endif
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return NULL;
+
 	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0)
+		return NULL;
+
 	ssp->type = type;
 	ssp->pdev = pdev;
 	ssp->port_id = pxa2xx_spi_get_port_id(adev);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 288/350] MIPS: ralink: enable PCI support only if driver for mt7621 SoC is selected

[Sasha Levin]

From: Sergio Paracuellos <sergio.paracuellos@gmail.com>

[ Upstream commit 3b2fa0c92686562ac0b8cf00c0326a45814f8e18 ]

Some versions of SoC MT7621 have three PCI express hosts. Some boards
make use of those PCI through the staging driver mt7621-pci. Recently
PCI support has been removed from MT7621 Soc kernel configuration due
to a build error. This makes imposible to compile staging driver and
produces a regression for gnubee based boards. Enable support for PCI
again but enable it only if staging mt7621-pci driver is selected.

Fixes: c4d48cf5e2f0 ("MIPS: ralink: deactivate PCI support for SOC_MT7621")
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: john@phrozen.org
Cc: NeilBrown <neil@brown.name>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20191019081233.7337-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ralink/Kconfig           | 1 +
 drivers/staging/mt7621-pci/Kconfig | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 1434fa60f3db1..94e9ce9944944 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -51,6 +51,7 @@ choice
 		select MIPS_GIC
 		select COMMON_CLK
 		select CLKSRC_MIPS_GIC
+		select HAVE_PCI if PCI_MT7621
 endchoice
 
 choice
diff --git a/drivers/staging/mt7621-pci/Kconfig b/drivers/staging/mt7621-pci/Kconfig
index af928b75a9403..ce58042f2f211 100644
--- a/drivers/staging/mt7621-pci/Kconfig
+++ b/drivers/staging/mt7621-pci/Kconfig
@@ -2,7 +2,6 @@
 config PCI_MT7621
 	tristate "MediaTek MT7621 PCI Controller"
 	depends on RALINK
-	depends on PCI
 	select PCI_DRIVERS_GENERIC
 	help
 	  This selects a driver for the MediaTek MT7621 PCI Controller.
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 316/350] int128: move __uint128_t compiler test to Kconfig

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit c12d3362a74bf0cd9e1d488918d40607b62a3104 ]

In order to use 128-bit integer arithmetic in C code, the architecture
needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
and it requires a version of the toolchain that supports this at build
time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
whether __SIZEOF_INT128__ is defined, since this is only the case for
compilers that can support 128-bit integers.

Let's fold this additional test into the Kconfig declaration of
ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
e.g., to decide whether a certain object needs to be included in the
first place.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig | 2 +-
 arch/riscv/Kconfig | 2 +-
 arch/x86/Kconfig   | 2 +-
 crypto/ecc.c       | 2 +-
 init/Kconfig       | 4 ++++
 lib/ubsan.c        | 2 +-
 lib/ubsan.h        | 2 +-
 7 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 3f047afb982c8..54c38c9cab88a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -67,7 +67,7 @@ config ARM64
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_SUPPORTS_ATOMIC_RMW
-	select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000 || CC_IS_CLANG
+	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8eebbc8860bbd..75a6c91176221 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -164,7 +164,7 @@ config ARCH_RV32I
 config ARCH_RV64I
 	bool "RV64I"
 	select 64BIT
-	select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000
+	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && GCC_VERSION >= 50000
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8ef85139553f5..f2aed8012e9c0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,7 +24,7 @@ config X86_64
 	depends on 64BIT
 	# Options that are inherently 64-bit kernel only:
 	select ARCH_HAS_GIGANTIC_PAGE
-	select ARCH_SUPPORTS_INT128
+	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select HAVE_ARCH_SOFT_DIRTY
 	select MODULES_USE_ELF_RELA
diff --git a/crypto/ecc.c b/crypto/ecc.c
index dfe114bc0c4af..6e6aab6c987c2 100644
--- a/crypto/ecc.c
+++ b/crypto/ecc.c
@@ -336,7 +336,7 @@ static u64 vli_usub(u64 *result, const u64 *left, u64 right,
 static uint128_t mul_64_64(u64 left, u64 right)
 {
 	uint128_t result;
-#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
+#if defined(CONFIG_ARCH_SUPPORTS_INT128)
 	unsigned __int128 m = (unsigned __int128)left * right;
 
 	result.m_low  = m;
diff --git a/init/Kconfig b/init/Kconfig
index b4daad2bac233..020526f681c03 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -785,6 +785,10 @@ config ARCH_SUPPORTS_NUMA_BALANCING
 config ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	bool
 
+config CC_HAS_INT128
+	def_bool y
+	depends on !$(cc-option,-D__SIZEOF_INT128__=0)
+
 #
 # For architectures that know their GCC __int128 support is sound
 #
diff --git a/lib/ubsan.c b/lib/ubsan.c
index 0c4681118fcd2..fc552d524ef77 100644
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -119,7 +119,7 @@ static void val_to_string(char *str, size_t size, struct type_descriptor *type,
 {
 	if (type_is_int(type)) {
 		if (type_bit_width(type) == 128) {
-#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
+#if defined(CONFIG_ARCH_SUPPORTS_INT128)
 			u_max val = get_unsigned_val(type, value);
 
 			scnprintf(str, size, "0x%08x%08x%08x%08x",
diff --git a/lib/ubsan.h b/lib/ubsan.h
index b8fa83864467f..7b56c09473a98 100644
--- a/lib/ubsan.h
+++ b/lib/ubsan.h
@@ -78,7 +78,7 @@ struct invalid_value_data {
 	struct type_descriptor *type;
 };
 
-#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
+#if defined(CONFIG_ARCH_SUPPORTS_INT128)
 typedef __int128 s_max;
 typedef unsigned __int128 u_max;
 #else
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 324/350] mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit e8b970c8e367e85fab9b8ac4f36080e5d653c38e ]

Fix possible out-of-bound access of status rates array in
mt7615_fill_txs/mt7603_fill_txs routines

Fixes: c5211e997eca ("mt76: mt7603: rework and fix tx status reporting")
Fixes: 4af81f02b49c ("mt76: mt7615: sync with mt7603 rate control changes")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 4 +++-
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index c328192307c48..ff3f3d98b6252 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -1032,8 +1032,10 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
 		if (idx && (cur_rate->idx != info->status.rates[i].idx ||
 			    cur_rate->flags != info->status.rates[i].flags)) {
 			i++;
-			if (i == ARRAY_SIZE(info->status.rates))
+			if (i == ARRAY_SIZE(info->status.rates)) {
+				i--;
 				break;
+			}
 
 			info->status.rates[i] = *cur_rate;
 			info->status.rates[i].count = 0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index e07ce2c100133..111e38ff954a2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -914,8 +914,10 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 		if (idx && (cur_rate->idx != info->status.rates[i].idx ||
 			    cur_rate->flags != info->status.rates[i].flags)) {
 			i++;
-			if (i == ARRAY_SIZE(info->status.rates))
+			if (i == ARRAY_SIZE(info->status.rates)) {
+				i--;
 				break;
+			}
 
 			info->status.rates[i] = *cur_rate;
 			info->status.rates[i].count = 0;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 329/350] crypto: sun4i-ss - Fix 64-bit size_t warnings

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit d6e9da21ee8246b5e556b3b153401ab045adb986 ]

If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.

This patch fixes all of the warnings.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
index 6536fd4bee657..7e5e092a23b3c 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -72,7 +72,8 @@ static int noinline_for_stack sun4i_ss_opti_poll(struct skcipher_request *areq)
 	oi = 0;
 	oo = 0;
 	do {
-		todo = min3(rx_cnt, ileft, (mi.length - oi) / 4);
+		todo = min(rx_cnt, ileft);
+		todo = min_t(size_t, todo, (mi.length - oi) / 4);
 		if (todo) {
 			ileft -= todo;
 			writesl(ss->base + SS_RXFIFO, mi.addr + oi, todo);
@@ -87,7 +88,8 @@ static int noinline_for_stack sun4i_ss_opti_poll(struct skcipher_request *areq)
 		rx_cnt = SS_RXFIFO_SPACES(spaces);
 		tx_cnt = SS_TXFIFO_SPACES(spaces);
 
-		todo = min3(tx_cnt, oleft, (mo.length - oo) / 4);
+		todo = min(tx_cnt, oleft);
+		todo = min_t(size_t, todo, (mo.length - oo) / 4);
 		if (todo) {
 			oleft -= todo;
 			readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo);
@@ -239,7 +241,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 			 * todo is the number of consecutive 4byte word that we
 			 * can read from current SG
 			 */
-			todo = min3(rx_cnt, ileft / 4, (mi.length - oi) / 4);
+			todo = min(rx_cnt, ileft / 4);
+			todo = min_t(size_t, todo, (mi.length - oi) / 4);
 			if (todo && !ob) {
 				writesl(ss->base + SS_RXFIFO, mi.addr + oi,
 					todo);
@@ -253,8 +256,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 				 * we need to be able to write all buf in one
 				 * pass, so it is why we min() with rx_cnt
 				 */
-				todo = min3(rx_cnt * 4 - ob, ileft,
-					    mi.length - oi);
+				todo = min(rx_cnt * 4 - ob, ileft);
+				todo = min_t(size_t, todo, mi.length - oi);
 				memcpy(buf + ob, mi.addr + oi, todo);
 				ileft -= todo;
 				oi += todo;
@@ -274,7 +277,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 		spaces = readl(ss->base + SS_FCSR);
 		rx_cnt = SS_RXFIFO_SPACES(spaces);
 		tx_cnt = SS_TXFIFO_SPACES(spaces);
-		dev_dbg(ss->dev, "%x %u/%u %u/%u cnt=%u %u/%u %u/%u cnt=%u %u\n",
+		dev_dbg(ss->dev,
+			"%x %u/%zu %u/%u cnt=%u %u/%zu %u/%u cnt=%u %u\n",
 			mode,
 			oi, mi.length, ileft, areq->cryptlen, rx_cnt,
 			oo, mo.length, oleft, areq->cryptlen, tx_cnt, ob);
@@ -282,7 +286,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 		if (!tx_cnt)
 			continue;
 		/* todo in 4bytes word */
-		todo = min3(tx_cnt, oleft / 4, (mo.length - oo) / 4);
+		todo = min(tx_cnt, oleft / 4);
+		todo = min_t(size_t, todo, (mo.length - oo) / 4);
 		if (todo) {
 			readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo);
 			oleft -= todo * 4;
@@ -308,7 +313,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 				 * no more than remaining buffer
 				 * no need to test against oleft
 				 */
-				todo = min(mo.length - oo, obl - obo);
+				todo = min_t(size_t,
+					     mo.length - oo, obl - obo);
 				memcpy(mo.addr + oo, bufo + obo, todo);
 				oleft -= todo;
 				obo += todo;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 331/350] crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c

[Sasha Levin]

From: Corentin Labbe <clabbe.montjoie@gmail.com>

[ Upstream commit a7126603d46fe8f01aeedf589e071c6aaa6c6c39 ]

If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.

This patch fixes all of the warnings on sun4i-ss-hash.c.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
index fcffba5ef9276..1369c5fa30871 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
@@ -272,8 +272,8 @@ static int sun4i_hash(struct ahash_request *areq)
 			 */
 			while (op->len < 64 && i < end) {
 				/* how many bytes we can read from current SG */
-				in_r = min3(mi.length - in_i, end - i,
-					    64 - op->len);
+				in_r = min(end - i, 64 - op->len);
+				in_r = min_t(size_t, mi.length - in_i, in_r);
 				memcpy(op->buf + op->len, mi.addr + in_i, in_r);
 				op->len += in_r;
 				i += in_r;
@@ -293,8 +293,8 @@ static int sun4i_hash(struct ahash_request *areq)
 		}
 		if (mi.length - in_i > 3 && i < end) {
 			/* how many bytes we can read from current SG */
-			in_r = min3(mi.length - in_i, areq->nbytes - i,
-				    ((mi.length - in_i) / 4) * 4);
+			in_r = min_t(size_t, mi.length - in_i, areq->nbytes - i);
+			in_r = min_t(size_t, ((mi.length - in_i) / 4) * 4, in_r);
 			/* how many bytes we can write in the device*/
 			todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4);
 			writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo);
@@ -320,8 +320,8 @@ static int sun4i_hash(struct ahash_request *areq)
 	if ((areq->nbytes - i) < 64) {
 		while (i < areq->nbytes && in_i < mi.length && op->len < 64) {
 			/* how many bytes we can read from current SG */
-			in_r = min3(mi.length - in_i, areq->nbytes - i,
-				    64 - op->len);
+			in_r = min(areq->nbytes - i, 64 - op->len);
+			in_r = min_t(size_t, mi.length - in_i, in_r);
 			memcpy(op->buf + op->len, mi.addr + in_i, in_r);
 			op->len += in_r;
 			i += in_r;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 316/350] int128: move __uint128_t compiler test to Kconfig

[Ard Biesheuvel]

On Tue, 10 Dec 2019 at 22:13, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ard Biesheuvel <ardb@kernel.org>
>
> [ Upstream commit c12d3362a74bf0cd9e1d488918d40607b62a3104 ]
>
> In order to use 128-bit integer arithmetic in C code, the architecture
> needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
> and it requires a version of the toolchain that supports this at build
> time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
> whether __SIZEOF_INT128__ is defined, since this is only the case for
> compilers that can support 128-bit integers.
>
> Let's fold this additional test into the Kconfig declaration of
> ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
> e.g., to decide whether a certain object needs to be included in the
> first place.
>
> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This does not fix a bug so no need to put it in -stable

> ---
>  arch/arm64/Kconfig | 2 +-
>  arch/riscv/Kconfig | 2 +-
>  arch/x86/Kconfig   | 2 +-
>  crypto/ecc.c       | 2 +-
>  init/Kconfig       | 4 ++++
>  lib/ubsan.c        | 2 +-
>  lib/ubsan.h        | 2 +-
>  7 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 3f047afb982c8..54c38c9cab88a 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -67,7 +67,7 @@ config ARM64
>         select ARCH_USE_QUEUED_SPINLOCKS
>         select ARCH_SUPPORTS_MEMORY_FAILURE
>         select ARCH_SUPPORTS_ATOMIC_RMW
> -       select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000 || CC_IS_CLANG
> +       select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
>         select ARCH_SUPPORTS_NUMA_BALANCING
>         select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
>         select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8eebbc8860bbd..75a6c91176221 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -164,7 +164,7 @@ config ARCH_RV32I
>  config ARCH_RV64I
>         bool "RV64I"
>         select 64BIT
> -       select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000
> +       select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && GCC_VERSION >= 50000
>         select HAVE_FUNCTION_TRACER
>         select HAVE_FUNCTION_GRAPH_TRACER
>         select HAVE_FTRACE_MCOUNT_RECORD
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 8ef85139553f5..f2aed8012e9c0 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -24,7 +24,7 @@ config X86_64
>         depends on 64BIT
>         # Options that are inherently 64-bit kernel only:
>         select ARCH_HAS_GIGANTIC_PAGE
> -       select ARCH_SUPPORTS_INT128
> +       select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
>         select ARCH_USE_CMPXCHG_LOCKREF
>         select HAVE_ARCH_SOFT_DIRTY
>         select MODULES_USE_ELF_RELA
> diff --git a/crypto/ecc.c b/crypto/ecc.c
> index dfe114bc0c4af..6e6aab6c987c2 100644
> --- a/crypto/ecc.c
> +++ b/crypto/ecc.c
> @@ -336,7 +336,7 @@ static u64 vli_usub(u64 *result, const u64 *left, u64 right,
>  static uint128_t mul_64_64(u64 left, u64 right)
>  {
>         uint128_t result;
> -#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
> +#if defined(CONFIG_ARCH_SUPPORTS_INT128)
>         unsigned __int128 m = (unsigned __int128)left * right;
>
>         result.m_low  = m;
> diff --git a/init/Kconfig b/init/Kconfig
> index b4daad2bac233..020526f681c03 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -785,6 +785,10 @@ config ARCH_SUPPORTS_NUMA_BALANCING
>  config ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
>         bool
>
> +config CC_HAS_INT128
> +       def_bool y
> +       depends on !$(cc-option,-D__SIZEOF_INT128__=0)
> +
>  #
>  # For architectures that know their GCC __int128 support is sound
>  #
> diff --git a/lib/ubsan.c b/lib/ubsan.c
> index 0c4681118fcd2..fc552d524ef77 100644
> --- a/lib/ubsan.c
> +++ b/lib/ubsan.c
> @@ -119,7 +119,7 @@ static void val_to_string(char *str, size_t size, struct type_descriptor *type,
>  {
>         if (type_is_int(type)) {
>                 if (type_bit_width(type) == 128) {
> -#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
> +#if defined(CONFIG_ARCH_SUPPORTS_INT128)
>                         u_max val = get_unsigned_val(type, value);
>
>                         scnprintf(str, size, "0x%08x%08x%08x%08x",
> diff --git a/lib/ubsan.h b/lib/ubsan.h
> index b8fa83864467f..7b56c09473a98 100644
> --- a/lib/ubsan.h
> +++ b/lib/ubsan.h
> @@ -78,7 +78,7 @@ struct invalid_value_data {
>         struct type_descriptor *type;
>  };
>
> -#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
> +#if defined(CONFIG_ARCH_SUPPORTS_INT128)
>  typedef __int128 s_max;
>  typedef unsigned __int128 u_max;
>  #else
> --
> 2.20.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 632 bytes --]

On Tue, Dec 10, 2019 at 04:03:53PM -0500, Sasha Levin wrote:
> From: Daniel Vetter <daniel.vetter@ffwll.ch>
> 
> [ Upstream commit b2662a164f9dc48da8822e56600686d639056282 ]
> 
> In DMA mode we have a maximum transfer size, past that the driver
> falls back to PIO (see the check at the top of pxa2xx_spi_transfer_one).
> Falling back to PIO for big transfers defeats the point of a dma engine,
> hence set the max transfer size to inform spi clients that they need
> to do something smarter.

This won't fix anything by itself, this asks other code to change how it
behaves which may or may not work in older kernels.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 197/350] ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 586 bytes --]

On Tue, Dec 10, 2019 at 04:05:02PM -0500, Sasha Levin wrote:
> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> 
> [ Upstream commit f9ad75468453b019b92c5296e6a04bf7c37f49e4 ]
> 
> updated solution to the problem reported with randconfig:
> 
> CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
> turn referenced by the sof-of-dev driver. This creates a reverse
> dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
> is built-in but CONFIG_SND_SOC_SOF_IMX=m:

Are you sure this doesn't depend on any other Kconfig changes?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode

[Sasha Levin]

On Wed, Dec 11, 2019 at 10:47:38AM +0000, Mark Brown wrote:
>On Tue, Dec 10, 2019 at 04:03:53PM -0500, Sasha Levin wrote:
>> From: Daniel Vetter <daniel.vetter@ffwll.ch>
>>
>> [ Upstream commit b2662a164f9dc48da8822e56600686d639056282 ]
>>
>> In DMA mode we have a maximum transfer size, past that the driver
>> falls back to PIO (see the check at the top of pxa2xx_spi_transfer_one).
>> Falling back to PIO for big transfers defeats the point of a dma engine,
>> hence set the max transfer size to inform spi clients that they need
>> to do something smarter.
>
>This won't fix anything by itself, this asks other code to change how it
>behaves which may or may not work in older kernels.

I'll drop it then, thanks!

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 197/350] ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

[Sasha Levin]

On Wed, Dec 11, 2019 at 11:00:05AM +0000, Mark Brown wrote:
>On Tue, Dec 10, 2019 at 04:05:02PM -0500, Sasha Levin wrote:
>> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>>
>> [ Upstream commit f9ad75468453b019b92c5296e6a04bf7c37f49e4 ]
>>
>> updated solution to the problem reported with randconfig:
>>
>> CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
>> turn referenced by the sof-of-dev driver. This creates a reverse
>> dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
>> is built-in but CONFIG_SND_SOC_SOF_IMX=m:
>
>Are you sure this doesn't depend on any other Kconfig changes?

Nope, but it didn't fail my build tests.

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 316/350] int128: move __uint128_t compiler test to Kconfig

[Sasha Levin]

On Wed, Dec 11, 2019 at 10:07:54AM +0000, Ard Biesheuvel wrote:
>On Tue, 10 Dec 2019 at 22:13, Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Ard Biesheuvel <ardb@kernel.org>
>>
>> [ Upstream commit c12d3362a74bf0cd9e1d488918d40607b62a3104 ]
>>
>> In order to use 128-bit integer arithmetic in C code, the architecture
>> needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
>> and it requires a version of the toolchain that supports this at build
>> time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
>> whether __SIZEOF_INT128__ is defined, since this is only the case for
>> compilers that can support 128-bit integers.
>>
>> Let's fold this additional test into the Kconfig declaration of
>> ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
>> e.g., to decide whether a certain object needs to be included in the
>> first place.
>>
>> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
>> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This does not fix a bug so no need to put it in -stable

Dropped, thanks!

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel