Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [GIT PULL] Qualcomm ARM64 defconfig updates for v5.6
@ 2020-01-13 20:41 Bjorn Andersson
  0 siblings, 0 replies; only message in thread
From: Bjorn Andersson @ 2020-01-13 20:41 UTC (permalink / raw)
  To: arm, soc
  Cc: Arnd Bergmann, Jeffrey Hugo, linux-arm-msm, Amit Kucheria,
	Bjorn Andersson, Niklas Cassel, Andy Gross, Lina Iyer,
	Kevin Hilman, Olof Johansson, Jorge Ramirez-Ortiz,
	linux-arm-kernel

Olof, I attempted to make the two CPUFREQ drivers =m, but the result is
that CPUfreq doesn't come up on QCS404. We will need to investigate this
further and I will follow up with a patch once this is sorted out.

Regards,
Bjorn

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-defconfig-for-5.6

for you to fetch changes up to a7ab9b89af22a8ce68db648759d974a214bc25bd:

  arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM (2020-01-04 23:58:00 -0800)

----------------------------------------------------------------
Qualcomm ARM64 defconfig updates for v5.6

* Enable NVMEM and OSM CPUfreq drivers
* Enable CPR driver
* Enable HFPLL driver
* Enable ATH10k SNOC driver
* Enable PMIC thermal driver
* Enable wakeup controller driver
* Enable watchdog driver
* Enable PRNG driver
* Enable SN65DSI86 DSI to DisplayPort bridge driver
* Enable QCA Bluetooth driver
* Enable Qualcomm SoCinfo driver
* Enable SPI and QSPI drivers
* Enable drivers providing remoteproc dependencies

----------------------------------------------------------------
Amit Kucheria (1):
      arm64: defconfig: Enable QCOM PMIC thermal

Bjorn Andersson (7):
      arm64: defconfig: Enable Qualcomm remoteproc dependencies
      arm64: defconfig: Enable Qualcomm SPI and QSPI controller
      arm64: defconfig: Enable Qualcomm socinfo driver
      arm64: defconfig: Enable Qualcomm CPUfreq HW driver
      arm64: defconfig: Enable Qualcomm pseudo rng
      arm64: defconfig: Enable Qualcomm watchdog driver
      arm64: defconfig: Enable ATH10K_SNOC

Jeffrey Hugo (2):
      arm64: defconfig: Enable QCA Bluetooth over UART
      arm64: defconfig: Enable SN65DSI86 display bridge

Jorge Ramirez-Ortiz (1):
      arm64: defconfig: Enable HFPLL

Lina Iyer (1):
      arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845

Niklas Cassel (2):
      arm64: defconfig: enable CONFIG_QCOM_CPR
      arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM

 arch/arm64/configs/defconfig | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-13 20:41 [GIT PULL] Qualcomm ARM64 defconfig updates for v5.6 Bjorn Andersson

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git