[PATCH AUTOSEL 4.14 005/371] PCI: iproc: Remove PAXC slot check to allow VF support

[PATCH AUTOSEL 4.14 005/371] PCI: iproc: Remove PAXC slot check to allow VF support

[Sasha Levin]

From: Jitendra Bhivare <jitendra.bhivare@broadcom.com>

[ Upstream commit 4da6b4480766e5bc9c4d7bc14bf1d0939a1a5fa7 ]

Fix previous incorrect logic that limits PAXC slot number to zero only.
In order for SRIOV/VF to work, we need to allow the slot number to be
greater than zero.

Fixes: 46560388c476c ("PCI: iproc: Allow multiple devices except on PAXC")
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-iproc.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index c0ecc9f35667..8f8dac0155d6 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -573,14 +573,6 @@ static void __iomem *iproc_pcie_map_cfg_bus(struct iproc_pcie *pcie,
 			return (pcie->base + offset);
 	}
 
-	/*
-	 * PAXC is connected to an internally emulated EP within the SoC.  It
-	 * allows only one device.
-	 */
-	if (pcie->ep_is_internal)
-		if (slot > 0)
-			return NULL;
-
 	return iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 014/371] drm/sun4i: hdmi: Fix double flag assignation

[Sasha Levin]

From: Maxime Ripard <maxime.ripard@bootlin.com>

[ Upstream commit 1e0ff648940e603cab6c52cf3723017d30d78f30 ]

The is_double flag is a boolean currently assigned to the value of the d
variable, that is either 1 or 2. It means that this is_double variable is
always set to true, even though the initial intent was to have it set to
true when d is 2.

Fix this.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
index 5cf2527bffc8..d7a8fea94557 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
@@ -50,7 +50,7 @@ static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
 			    (rate - tmp_rate) < (rate - best_rate)) {
 				best_rate = tmp_rate;
 				best_m = m;
-				is_double = d;
+				is_double = (d == 2) ? true : false;
 			}
 		}
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 022/371] staging: bcm2835-camera: Abort probe if there is no camera

[Sasha Levin]

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 7566f39dfdc11f8a97d5810c6e6295a88f97ef91 ]

Abort the probing of the camera driver in case there isn't a camera
actually connected to the Raspberry Pi. This solution also avoids a
NULL ptr dereference of mmal instance on driver unload.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../vc04_services/bcm2835-camera/bcm2835-camera.c        | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 377da037f31c..b521752d9aa0 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -1849,6 +1849,12 @@ static int __init bm2835_mmal_init(void)
 	num_cameras = get_num_cameras(instance,
 				      resolutions,
 				      MAX_BCM2835_CAMERAS);
+
+	if (num_cameras < 1) {
+		ret = -ENODEV;
+		goto cleanup_mmal;
+	}
+
 	if (num_cameras > MAX_BCM2835_CAMERAS)
 		num_cameras = MAX_BCM2835_CAMERAS;
 
@@ -1948,6 +1954,9 @@ static int __init bm2835_mmal_init(void)
 	pr_info("%s: error %d while loading driver\n",
 		BM2835_MMAL_MODULE_NAME, ret);
 
+cleanup_mmal:
+	vchiq_mmal_finalise(instance);
+
 	return ret;
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 039/371] clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit cee82eb9532090cd1dc953e845d71f9b1445c84e ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-exynos4.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index d8d3cb67b402..3d3026221927 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1240,6 +1240,7 @@ static unsigned long __init exynos4_get_xom(void)
 			xom = readl(chipid_base + 8);
 
 		iounmap(chipid_base);
+		of_node_put(np);
 	}
 
 	return xom;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 040/371] clk: imx6q: fix refcount leak in imx6q_clocks_init()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit c9ec1d8fef31b5fc9e90e99f9bd685db5caa7c5e ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 2acd1b6f889c ("ARM: i.MX6: implement clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx6q.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 8eb93eb2f857..e0547654cb7b 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -431,6 +431,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
 	if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 041/371] clk: imx6sx: fix refcount leak in imx6sx_clocks_init()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 1731e14fb30212dd8c1e9f8fc1af061e56498c55 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: d55135689019 ("ARM: imx: add clock driver for imx6sx")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx6sx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
index e6d389e333d7..baa07553a0dd 100644
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -164,6 +164,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
 	clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 042/371] clk: imx7d: fix refcount leak in imx7d_clocks_init()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 5f8c183a996b76bb09748073c856e4246fd4ce95 ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 8f6d8094b215 ("ARM: imx: add imx7d clk tree support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx7d.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 0ac9b30c8b90..9f5e5b9d4a25 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -416,6 +416,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 
 	clks[IMX7D_PLL_ARM_MAIN_SRC]  = imx_clk_mux("pll_arm_main_src", base + 0x60, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
 	clks[IMX7D_PLL_DRAM_MAIN_SRC] = imx_clk_mux("pll_dram_main_src", base + 0x70, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 043/371] clk: vf610: fix refcount leak in vf610_clocks_init()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 567177024e0313e4f0dcba7ba10c0732e50e655d ]

The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 1f2c5fd5f048 ("ARM: imx: add VF610 clock support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-vf610.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index 6dae54325a91..a334667c450a 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -203,6 +203,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
 	anatop_base = of_iomap(np, 0);
 	BUG_ON(!anatop_base);
+	of_node_put(np);
 
 	np = ccm_node;
 	ccm_base = of_iomap(np, 0);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 049/371] MIPS: BCM63XX: drop unused and broken DSP platform device

[Sasha Levin]

From: Jonas Gorski <jonas.gorski@gmail.com>

[ Upstream commit 682fee802843b332f9c51ffc8e062de5ff773f2e ]

Trying to register the DSP platform device results in a null pointer
access:

[    0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20
[    0.135208] Oops[#1]:
[    0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87
...
[    0.197117] epc   : 804e305c bcm63xx_dsp_register+0x80/0xa4
[    0.202838] ra    : 804e6f20 board_register_devices+0x258/0x390
...

This happens because it tries to copy the passed platform data over the
platform_device's unpopulated platform_data.

Since this code has been broken since its submission, no driver was ever
submitted for it, and apparently nobody was using it, just remove it
instead of trying to fix it.

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm63xx/Makefile                    |  6 +-
 arch/mips/bcm63xx/boards/board_bcm963xx.c     | 20 -------
 arch/mips/bcm63xx/dev-dsp.c                   | 56 -------------------
 .../asm/mach-bcm63xx/bcm63xx_dev_dsp.h        | 14 -----
 .../include/asm/mach-bcm63xx/board_bcm963xx.h |  5 --
 5 files changed, 3 insertions(+), 98 deletions(-)
 delete mode 100644 arch/mips/bcm63xx/dev-dsp.c
 delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index c69f297fc1df..d89651e538f6 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-		   dev-wdt.o dev-usb-usbd.o
+		   setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+		   dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+		   dev-usb-usbd.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index b2097c0d2ed7..36ec3dc2c999 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -23,7 +23,6 @@
 #include <bcm63xx_nvram.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
-#include <bcm63xx_dev_dsp.h>
 #include <bcm63xx_dev_flash.h>
 #include <bcm63xx_dev_hsspi.h>
 #include <bcm63xx_dev_pcmcia.h>
@@ -289,14 +288,6 @@ static struct board_info __initdata board_96348gw_10 = {
 	.has_pccard			= 1,
 	.has_ehci0			= 1,
 
-	.has_dsp			= 1,
-	.dsp = {
-		.gpio_rst		= 6,
-		.gpio_int		= 34,
-		.cs			= 2,
-		.ext_irq		= 2,
-	},
-
 	.leds = {
 		{
 			.name		= "adsl-fail",
@@ -401,14 +392,6 @@ static struct board_info __initdata board_96348gw = {
 
 	.has_ohci0 = 1,
 
-	.has_dsp			= 1,
-	.dsp = {
-		.gpio_rst		= 6,
-		.gpio_int		= 34,
-		.ext_irq		= 2,
-		.cs			= 2,
-	},
-
 	.leds = {
 		{
 			.name		= "adsl-fail",
@@ -898,9 +881,6 @@ int __init board_register_devices(void)
 	if (board.has_usbd)
 		bcm63xx_usbd_register(&board.usbd);
 
-	if (board.has_dsp)
-		bcm63xx_dsp_register(&board.dsp);
-
 	/* Generate MAC address for WLAN and register our SPROM,
 	 * do this after registering enet devices
 	 */
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
deleted file mode 100644
index 5bb5b154c9bd..000000000000
--- a/arch/mips/bcm63xx/dev-dsp.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Broadcom BCM63xx VoIP DSP registration
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_dev_dsp.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_io.h>
-
-static struct resource voip_dsp_resources[] = {
-	{
-		.start		= -1, /* filled at runtime */
-		.end		= -1, /* filled at runtime */
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= -1, /* filled at runtime */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bcm63xx_voip_dsp_device = {
-	.name		= "bcm63xx-voip-dsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(voip_dsp_resources),
-	.resource	= voip_dsp_resources,
-};
-
-int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd)
-{
-	struct bcm63xx_dsp_platform_data *dpd;
-	u32 val;
-
-	/* Get the memory window */
-	val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1));
-	val &= MPI_CSBASE_BASE_MASK;
-	voip_dsp_resources[0].start = val;
-	voip_dsp_resources[0].end = val + 0xFFFFFFF;
-	voip_dsp_resources[1].start = pd->ext_irq;
-
-	/* copy given platform data */
-	dpd = bcm63xx_voip_dsp_device.dev.platform_data;
-	memcpy(dpd, pd, sizeof (*pd));
-
-	return platform_device_register(&bcm63xx_voip_dsp_device);
-}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
deleted file mode 100644
index 4e4970787371..000000000000
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __BCM63XX_DSP_H
-#define __BCM63XX_DSP_H
-
-struct bcm63xx_dsp_platform_data {
-	unsigned gpio_rst;
-	unsigned gpio_int;
-	unsigned cs;
-	unsigned ext_irq;
-};
-
-int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd);
-
-#endif /* __BCM63XX_DSP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 5e5b1bc4a324..830f53f28e3f 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -7,7 +7,6 @@
 #include <linux/leds.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_usb_usbd.h>
-#include <bcm63xx_dev_dsp.h>
 
 /*
  * flash mapping
@@ -31,7 +30,6 @@ struct board_info {
 	unsigned int	has_ohci0:1;
 	unsigned int	has_ehci0:1;
 	unsigned int	has_usbd:1;
-	unsigned int	has_dsp:1;
 	unsigned int	has_uart0:1;
 	unsigned int	has_uart1:1;
 
@@ -43,9 +41,6 @@ struct board_info {
 	/* USB config */
 	struct bcm63xx_usbd_platform_data usbd;
 
-	/* DSP config */
-	struct bcm63xx_dsp_platform_data dsp;
-
 	/* GPIO LEDs */
 	struct gpio_led leds[5];
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel