[PATCH net v5 5/5] net: stmmac: update pci platform data to use phy_interface

[PATCH net v5 5/5] net: stmmac: update pci platform data to use phy_interface

[Ong Boon Leong]

From: Voon Weifeng <weifeng.voon@intel.com>

The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.

Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 623521052152..fe2c9fa6a71c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -95,7 +95,7 @@ static int stmmac_default_data(struct pci_dev *pdev,
 
 	plat->bus_id = 1;
 	plat->phy_addr = 0;
-	plat->interface = PHY_INTERFACE_MODE_GMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
@@ -217,7 +217,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_addr = 0;
-	plat->interface = PHY_INTERFACE_MODE_SGMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+
 	return ehl_common_data(pdev, plat);
 }
 
@@ -230,7 +231,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_addr = 0;
-	plat->interface = PHY_INTERFACE_MODE_RGMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
+
 	return ehl_common_data(pdev, plat);
 }
 
@@ -258,7 +260,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_addr = 0;
-	plat->interface = PHY_INTERFACE_MODE_SGMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 	return tgl_common_data(pdev, plat);
 }
 
@@ -358,7 +360,7 @@ static int quark_default_data(struct pci_dev *pdev,
 
 	plat->bus_id = pci_dev_id(pdev);
 	plat->phy_addr = ret;
-	plat->interface = PHY_INTERFACE_MODE_RMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_RMII;
 
 	plat->dma_cfg->pbl = 16;
 	plat->dma_cfg->pblx8 = true;
@@ -415,7 +417,7 @@ static int snps_gmac5_default_data(struct pci_dev *pdev,
 
 	plat->bus_id = 1;
 	plat->phy_addr = -1;
-	plat->interface = PHY_INTERFACE_MODE_GMII;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel