* [PATCH 00/18] genirq: Remove setup_irq()
@ 2020-02-12 8:01 afzal mohammed
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
` (3 more replies)
0 siblings, 4 replies; 15+ messages in thread
From: afzal mohammed @ 2020-02-12 8:01 UTC (permalink / raw)
To: linux-kernel, linux-rpi-kernel, linux-arm-kernel,
linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
linux-c6x-dev, linux-omap, linux-alpha
Cc: Julia Lawall, Thomas Gleixner, Michal Marek, Nicolas Palix,
Gilles Muller
While trying to understand internals of irq handling, came across a
thread [1] in which tglx was referring to avoid usage of setup_irq().
Existing callers of setup_irq() reached mostly via 'init_IRQ()' &
'time_init()', while memory allocators are ready by 'mm_init()'.
Hence instances of setup_irq() is replaced by request_irq() &
setup_irq() (along with remove_irq()) definition deleted in the last
patch.
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
Build & boot tested on ARM & x86_64 platforms (ensured that on the
machines used for testing there was an existing setup_irq()
invocation occuring at runtime)
Much of the changes were created using Coccinelle with an intention
to learn it. spatch command was directly run w/ semantic patch below.
But not everything could be automated.
Searching with 'git grep -n '\Wsetup_irq('' & avoiding the irrelevant
ones, 153 invocation's of setup_irq() were found. 112 could be replaced
w/ cocci, of which in a few files some desired hunks were missing or
not as expected, these were fixed up manually. Also the remaining 41
had to be done manually.
Although cocci could replace 112, because of line continue not
happening at paranthesis for request_irq(), around 80 had to be
manually aligned in the request_irq() statement. Problem was with my
below cocci snippet,
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,f_dev_id))
+ pr_err("request_irq() on %s failed\n", f_name);
Instead of the above, if below is used, line continue happens exactly
at paranthesis, but it lacks addition of printing on request_irq()
failure where existing setup_irq() failure was not doing it.
- setup_irq(E1,&act)
+ request_irq(E1,f_handler,f_flags,f_name,f_dev_id)
Above had an additional advantage of replacing instances of
if (setup_irq()) & BUG(setup_irq()), but luckily those instances were
very few.
So though many changes could be automated, there are a considerable
amount of manual changes, please review carefully especially mips &
alpha.
Usage of setup_percpu_irq() is untouched w/ this series.
There are 2 checkpatch warning about usage of BUG() [which was already
there w/ setup_irq()], they are left as is as it seems appropriate for
tick timer interrupt.
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
--->8---
@r1@
identifier ret;
@@
(
setup_irq(...);
|
ret = setup_irq(...);
)
@r2 depends on r1@
identifier act;
@@
static struct irqaction act = {
};
@r11 depends on r2@
identifier r2.act;
identifier f_handler;
@@
(
- act.handler = f_handler;
|
static struct irqaction act = {
.handler = f_handler,
};
)
@r12 depends on r2@
identifier r2.act;
expression f_name;
@@
(
- act.name = f_name;
|
static struct irqaction act = {
.name = f_name,
};
)
@r15 depends on r2@
identifier r2.act;
expression f_dev_id;
@@
(
- act.dev_id = f_dev_id;
|
static struct irqaction act = {
.dev_id = f_dev_id,
};
)
@r16 depends on r2@
identifier r2.act;
expression f_flags;
@@
(
- act.flags = f_flags;
|
static struct irqaction act = {
.flags = f_flags,
};
)
@r21 depends on r2@
identifier r2.act;
@@
- static struct irqaction act = {
- ...
- };
@r22 depends on r2 && r11 && r12 && r15 && r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r15.f_dev_id;
expression r16.f_flags;
expression E1;
identifier ret;
@@
(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,f_dev_id))
+ pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,f_flags,f_name,f_dev_id);
)
@r23 depends on r2 && r11 && r12 && !r15 && r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r16.f_flags;
expression E1;
identifier ret;
@@
(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,NULL))
+ pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,f_flags,f_name,NULL);
)
@r24 depends on r2 && r11 && r12 && r15 && !r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r15.f_dev_id;
expression E1;
identifier ret;
@@
(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,0,f_name,f_dev_id))
+ pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,0,f_name,f_dev_id);
)
@r25 depends on r2 && r11 && r12 && !r15 && !r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression E1;
identifier ret;
@@
(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,0,f_name,NULL))
+ pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,0,f_name,NULL);
)
--->8---
afzal mohammed (18):
alpha: replace setup_irq() by request_irq()
ARM: replace setup_irq() by request_irq()
c6x: replace setup_irq() by request_irq()
hexagon: replace setup_irq() by request_irq()
ia64: replace setup_irq() by request_irq()
m68k: Replace setup_irq() by request_irq()
microblaze: Replace setup_irq() by request_irq()
MIPS: Replace setup_irq() by request_irq()
parisc: Replace setup_irq() by request_irq()
powerpc: Replace setup_irq() by request_irq()
s390: replace setup_irq() by request_irq()
sh: replace setup_irq() by request_irq()
unicore32: replace setup_irq() by request_irq()
x86: Replace setup_irq() by request_irq()
xtensa: replace setup_irq() by request_irq()
clocksource: Replace setup_irq() by request_irq()
irqchip: Replace setup_irq() by request_irq()
genirq: Remove setup_irq() and remove_irq()
arch/alpha/kernel/irq_alpha.c | 29 ++-------
arch/alpha/kernel/irq_i8259.c | 8 +--
arch/alpha/kernel/irq_impl.h | 7 +--
arch/alpha/kernel/irq_pyxis.c | 3 +-
arch/alpha/kernel/sys_alcor.c | 3 +-
arch/alpha/kernel/sys_cabriolet.c | 3 +-
arch/alpha/kernel/sys_eb64p.c | 3 +-
arch/alpha/kernel/sys_marvel.c | 2 +-
arch/alpha/kernel/sys_miata.c | 6 +-
arch/alpha/kernel/sys_ruffian.c | 3 +-
arch/alpha/kernel/sys_rx164.c | 3 +-
arch/alpha/kernel/sys_sx164.c | 3 +-
arch/alpha/kernel/sys_wildfire.c | 7 +--
arch/alpha/kernel/time.c | 6 +-
arch/arm/mach-cns3xxx/core.c | 10 +---
arch/arm/mach-ebsa110/core.c | 10 +---
arch/arm/mach-ep93xx/timer-ep93xx.c | 12 ++--
arch/arm/mach-footbridge/dc21285-timer.c | 11 +---
arch/arm/mach-footbridge/isa-irq.c | 8 +--
arch/arm/mach-footbridge/isa-timer.c | 11 +---
arch/arm/mach-iop32x/time.c | 12 ++--
arch/arm/mach-mmp/time.c | 11 +---
arch/arm/mach-omap1/pm.c | 22 ++++---
arch/arm/mach-omap1/time.c | 10 +---
arch/arm/mach-omap1/timer32k.c | 10 +---
arch/arm/mach-omap2/timer.c | 11 +---
arch/arm/mach-rpc/time.c | 8 +--
arch/arm/mach-spear/time.c | 9 +--
arch/arm/plat-orion/time.c | 10 +---
arch/c6x/platforms/timer64.c | 11 +---
arch/hexagon/kernel/smp.c | 17 +++---
arch/hexagon/kernel/time.c | 11 +---
arch/ia64/kernel/irq_ia64.c | 42 +++++--------
arch/ia64/kernel/mca.c | 51 +++++-----------
arch/m68k/68000/timers.c | 9 +--
arch/m68k/coldfire/pit.c | 9 +--
arch/m68k/coldfire/sltimers.c | 19 ++----
arch/m68k/coldfire/timers.c | 19 ++----
arch/microblaze/kernel/timer.c | 10 +---
arch/mips/alchemy/common/time.c | 11 +---
arch/mips/ar7/irq.c | 18 +++---
arch/mips/ath25/ar2315.c | 9 +--
arch/mips/ath25/ar5312.c | 9 +--
arch/mips/bcm63xx/irq.c | 38 +++++-------
arch/mips/cobalt/irq.c | 14 ++---
arch/mips/dec/setup.c | 59 ++++++++-----------
arch/mips/emma/markeins/irq.c | 20 +++----
arch/mips/include/asm/sni.h | 2 +-
arch/mips/jazz/irq.c | 12 +---
arch/mips/kernel/cevt-bcm1480.c | 11 +---
arch/mips/kernel/cevt-ds1287.c | 9 +--
arch/mips/kernel/cevt-gt641xx.c | 9 +--
arch/mips/kernel/cevt-r4k.c | 4 +-
arch/mips/kernel/cevt-sb1250.c | 11 +---
arch/mips/kernel/cevt-txx9.c | 11 +---
arch/mips/kernel/i8253.c | 10 +---
arch/mips/kernel/rtlx-mt.c | 8 +--
arch/mips/kernel/smp.c | 33 ++++-------
arch/mips/lasat/interrupt.c | 10 +---
arch/mips/loongson2ef/common/bonito-irq.c | 9 +--
.../loongson2ef/common/cs5536/cs5536_mfgpt.c | 10 +---
arch/mips/loongson2ef/fuloong-2e/irq.c | 14 ++---
arch/mips/loongson2ef/lemote-2f/irq.c | 20 ++-----
arch/mips/loongson32/common/irq.c | 21 ++++---
arch/mips/loongson32/common/time.c | 12 ++--
arch/mips/loongson64/hpet.c | 10 +---
arch/mips/mti-malta/malta-int.c | 10 +---
arch/mips/netlogic/xlr/fmn.c | 9 +--
arch/mips/pmcs-msp71xx/msp_irq.c | 28 ++++-----
arch/mips/pmcs-msp71xx/msp_smp.c | 22 ++-----
arch/mips/pmcs-msp71xx/msp_time.c | 7 ++-
arch/mips/ralink/cevt-rt3352.c | 17 +++---
arch/mips/sgi-ip22/ip22-eisa.c | 8 +--
arch/mips/sgi-ip22/ip22-int.c | 49 +++++----------
arch/mips/sgi-ip32/ip32-irq.c | 18 ++----
arch/mips/sni/a20r.c | 4 +-
arch/mips/sni/irq.c | 8 +--
arch/mips/sni/pcit.c | 8 ++-
arch/mips/sni/rm200.c | 23 +++-----
arch/mips/sni/time.c | 10 +---
arch/mips/vr41xx/common/irq.c | 9 +--
arch/parisc/kernel/irq.c | 21 ++-----
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 10 +---
arch/powerpc/platforms/8xx/cpm1.c | 9 +--
arch/powerpc/platforms/8xx/m8xx_setup.c | 9 +--
arch/powerpc/platforms/chrp/setup.c | 14 ++---
arch/powerpc/platforms/powermac/pic.c | 31 ++++------
arch/powerpc/platforms/powermac/smp.c | 9 +--
arch/s390/kernel/irq.c | 8 +--
arch/sh/boards/mach-cayman/irq.c | 18 ++----
arch/sh/drivers/dma/dma-pvr2.c | 9 +--
arch/unicore32/kernel/time.c | 11 +---
arch/x86/kernel/irqinit.c | 18 +++---
arch/x86/kernel/time.c | 10 +---
arch/xtensa/kernel/smp.c | 8 +--
arch/xtensa/kernel/time.c | 10 +---
drivers/clocksource/bcm2835_timer.c | 8 +--
drivers/clocksource/bcm_kona_timer.c | 10 +---
drivers/clocksource/dw_apb_timer.c | 11 +---
drivers/clocksource/exynos_mct.c | 12 ++--
drivers/clocksource/mxs_timer.c | 10 +---
drivers/clocksource/nomadik-mtu.c | 11 +---
drivers/clocksource/samsung_pwm_timer.c | 12 ++--
drivers/clocksource/timer-atlas7.c | 50 ++++++++--------
drivers/clocksource/timer-cs5535.c | 10 +---
drivers/clocksource/timer-efm32.c | 10 +---
drivers/clocksource/timer-fsl-ftm.c | 10 +---
drivers/clocksource/timer-imx-gpt.c | 10 +---
drivers/clocksource/timer-integrator-ap.c | 11 +---
drivers/clocksource/timer-meson6.c | 11 +---
drivers/clocksource/timer-orion.c | 9 +--
drivers/clocksource/timer-prima2.c | 11 +---
drivers/clocksource/timer-pxa.c | 10 +---
drivers/clocksource/timer-sp804.c | 11 +---
drivers/clocksource/timer-u300.c | 9 +--
drivers/clocksource/timer-vf-pit.c | 10 +---
drivers/clocksource/timer-vt8500.c | 11 +---
drivers/clocksource/timer-zevio.c | 13 ++--
drivers/irqchip/irq-i8259.c | 9 +--
drivers/irqchip/irq-ingenic.c | 11 ++--
drivers/parisc/eisa.c | 8 +--
drivers/s390/cio/airq.c | 8 +--
drivers/s390/cio/cio.c | 8 +--
include/linux/dw_apb_timer.h | 1 -
include/linux/irq.h | 2 -
kernel/irq/manage.c | 44 --------------
126 files changed, 528 insertions(+), 1111 deletions(-)
base-commit: v5.6-rc1
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 02/18] ARM: replace setup_irq() by request_irq()
2020-02-12 8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
@ 2020-02-12 8:02 ` afzal mohammed
2020-02-12 8:10 ` Viresh Kumar
2020-02-12 23:27 ` Alexander Sverdlin
2020-02-12 8:04 ` [PATCH 08/18] MIPS: Replace " afzal mohammed
` (2 subsequent siblings)
3 siblings, 2 replies; 15+ messages in thread
From: afzal mohammed @ 2020-02-12 8:02 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel, linux-omap
Cc: Andrew Lunn, Enrico Weigelt, Jason Cooper, Arnd Bergmann,
Kevin Hilman, Tony Lindgren, Viresh Kumar, Gregory Clement,
Aaro Koskinen, Russell King, Hartley Sweeten, Lubomir Rintel,
Krzysztof Halasa, Greg Kroah-Hartman, Thomas Gleixner,
Alexander Sverdlin, Shiraz Hashim, Allison Randal,
Sebastian Hesselbarth
request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com
arch/arm/mach-cns3xxx/core.c | 10 +++-------
arch/arm/mach-ebsa110/core.c | 10 +++-------
arch/arm/mach-ep93xx/timer-ep93xx.c | 12 ++++--------
| 11 +++--------
| 8 ++------
| 11 +++--------
arch/arm/mach-iop32x/time.c | 12 ++++--------
arch/arm/mach-mmp/time.c | 11 +++--------
arch/arm/mach-omap1/pm.c | 22 +++++++++++++---------
arch/arm/mach-omap1/time.c | 10 +++-------
arch/arm/mach-omap1/timer32k.c | 10 +++-------
arch/arm/mach-omap2/timer.c | 11 +++--------
arch/arm/mach-rpc/time.c | 8 ++------
arch/arm/mach-spear/time.c | 9 ++-------
arch/arm/plat-orion/time.c | 10 +++-------
15 files changed, 54 insertions(+), 111 deletions(-)
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 1d61a7701c11..2e8d0062ea72 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction cns3xxx_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = cns3xxx_timer_interrupt,
-};
-
/*
* Set up the clock source and clock events devices
*/
@@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* Make irqs happen for the system timer */
- setup_irq(timer_irq, &cns3xxx_timer_irq);
+ if (request_irq(timer_irq, cns3xxx_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
cns3xxx_clockevents_init(timer_irq);
}
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index da2ff4f61d6b..cf79aa7637fc 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -201,12 +201,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ebsa110_timer_irq = {
- .name = "EBSA110 Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ebsa110_timer_interrupt,
-};
-
/*
* Set up timer interrupt.
*/
@@ -221,7 +215,9 @@ void __init ebsa110_timer_init(void)
__raw_writeb(COUNT & 0xff, PIT_T1);
__raw_writeb(COUNT >> 8, PIT_T1);
- setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+ if (request_irq(IRQ_EBSA110_TIMER0, ebsa110_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "EBSA110 Timer Tick", NULL))
+ pr_err("request_irq() on %s failed\n", "EBSA110 Timer Tick");
}
static struct plat_serial8250_port serial_platform_data[] = {
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..0335f3b93340 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,13 +117,6 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ep93xx_timer_irq = {
- .name = "ep93xx timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ep93xx_timer_interrupt,
- .dev_id = &ep93xx_clockevent,
-};
-
void __init ep93xx_timer_init(void)
{
/* Enable and register clocksource and sched_clock on timer 4 */
@@ -136,7 +129,10 @@ void __init ep93xx_timer_init(void)
EP93XX_TIMER4_RATE);
/* Set up clockevent on timer 3 */
- setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+ if (request_irq(IRQ_EP93XX_TIMER3, ep93xx_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "ep93xx timer",
+ &ep93xx_clockevent))
+ pr_err("request_irq() on %s failed\n", "ep93xx timer");
clockevents_config_and_register(&ep93xx_clockevent,
EP93XX_TIMER123_RATE,
1,
--git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index f76212d2dbf1..151b8a76896f 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -101,13 +101,6 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction footbridge_timer_irq = {
- .name = "dc21285_timer1",
- .handler = timer1_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &ckevt_dc21285,
-};
-
/*
* Set up timer interrupt.
*/
@@ -118,7 +111,9 @@ void __init footbridge_timer_init(void)
clocksource_register_hz(&cksrc_dc21285, rate);
- setup_irq(ce->irq, &footbridge_timer_irq);
+ if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "dc21285_timer1", &ckevt_dc21285))
+ pr_err("request_irq() on %s failed\n", "dc21285_timer1");
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
--git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 88a553932c33..85f1c3cad83e 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -96,11 +96,6 @@ static void isa_irq_handler(struct irq_desc *desc)
generic_handle_irq(isa_irq);
}
-static struct irqaction irq_cascade = {
- .handler = no_action,
- .name = "cascade",
-};
-
static struct resource pic1_resource = {
.name = "pic1",
.start = 0x20,
@@ -160,7 +155,8 @@ void __init isa_init_irq(unsigned int host_irq)
request_resource(&ioport_resource, &pic1_resource);
request_resource(&ioport_resource, &pic2_resource);
- setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
+ if (request_irq(IRQ_ISA_CASCADE, no_action, 0, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
irq_set_chained_handler(host_irq, isa_irq_handler);
--git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 82f45591fb2c..3c1aed290fde 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -25,17 +25,12 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction pit_timer_irq = {
- .name = "pit",
- .handler = pit_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &i8253_clockevent,
-};
-
void __init isa_timer_init(void)
{
clocksource_i8253_init();
- setup_irq(i8253_clockevent.irq, &pit_timer_irq);
+ if (request_irq(i8253_clockevent.irq, pit_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent))
+ pr_err("request_irq() on %s failed\n", "pit");
clockevent_i8253_init(false);
}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5c1baa..241637fcffff 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction iop_timer_irq = {
- .name = "IOP Timer Tick",
- .handler = iop_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .dev_id = &iop_clockevent,
-};
-
static unsigned long iop_tick_rate;
unsigned long get_iop_tick_rate(void)
{
@@ -168,7 +161,10 @@ void __init iop_init_time(unsigned long tick_rate)
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
write_tisr(1);
- setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+ if (request_irq(IRQ_IOP32X_TIMER0, iop_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "IOP Timer Tick",
+ &iop_clockevent))
+ pr_err("request_irq() on %s failed\n", "IOP Timer Tick");
iop_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&iop_clockevent, tick_rate,
0xf, 0xfffffffe);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..a5f157b4b981 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
__raw_writel(0x2, mmp_timer_base + TMR_CER);
}
-static struct irqaction timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = timer_interrupt,
- .dev_id = &ckevt,
-};
-
void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
ckevt.cpumask = cpumask_of(0);
- setup_irq(irq, &timer_irq);
+ if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "timer", &ckevt))
+ pr_err("request_irq() on %s failed\n", "timer");
clocksource_register_hz(&cksrc, rate);
clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958d6f8a..ae03fae5b75d 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
-static struct irqaction omap_wakeup_irq = {
- .name = "peripheral wakeup",
- .handler = omap_wakeup_interrupt
-};
-
static const struct platform_suspend_ops omap_pm_ops = {
@@ -655,10 +650,19 @@ static int __init omap_pm_init(void)
arm_pm_idle = omap1_pm_idle;
- if (cpu_is_omap7xx())
- setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
- else if (cpu_is_omap16xx())
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+ if (cpu_is_omap7xx()) {
+ if (request_irq(INT_7XX_WAKE_UP_REQ, omap_wakeup_interrupt, 0,
+ "peripheral wakeup", NULL)) {
+ pr_err("request_irq() on %s failed\n",
+ "peripheral wakeup");
+ }
+ } else if (cpu_is_omap16xx()) {
+ if (request_irq(INT_1610_WAKE_UP_REQ, omap_wakeup_interrupt, 0,
+ "peripheral wakeup", NULL)) {
+ pr_err("request_irq() on %s failed\n",
+ "peripheral wakeup");
+ }
+ }
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a31a49..da5685013e2c 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_mpu_timer1_irq = {
- .name = "mpu_timer1",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_mpu_timer1_interrupt,
-};
-
static __init void omap_init_mpu_timer(unsigned long rate)
{
- setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+ if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+ pr_err("request_irq() on %s failed\n", "mpu_timer1");
omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..e6bf8b48b7bb 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_32k_timer_irq = {
- .name = "32KHz timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_32k_timer_interrupt,
-};
-
static __init void omap_init_32k_timer(void)
{
- setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+ if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+ pr_err("request_irq() on %s failed\n", "32KHz timer");
clockevent_32k_timer.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 0d0a731cb476..e60f1fdc4a60 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap2_gp_timer_irq = {
- .name = "gp_timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap2_gp_timer_interrupt,
-};
-
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
&clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = &clkev;
- setup_irq(clkev.irq, &omap2_gp_timer_irq);
+ if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+ pr_err("request_irq() on %s failed\n", "gp_timer");
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 1d750152b160..14460c84aca4 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,11 +85,6 @@ ioc_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ioc_timer_irq = {
- .name = "timer",
- .handler = ioc_timer_interrupt
-};
-
/*
* Set up timer interrupt.
*/
@@ -97,5 +92,6 @@ void __init ioc_timer_init(void)
{
WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
ioctime_init();
- setup_irq(IRQ_TIMER0, &ioc_timer_irq);
+ if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
}
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 289e036c9c30..92b2850eeb4f 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction spear_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER,
- .handler = spear_timer_interrupt
-};
-
static void __init spear_clockevent_init(int irq)
{
u32 tick_rate;
@@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
- setup_irq(irq, &spear_timer_irq);
+ if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
}
static const struct of_device_id timer_of_match[] __initconst = {
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db68e9c..877ded7c8b28 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction orion_timer_irq = {
- .name = "orion_tick",
- .flags = IRQF_TIMER,
- .handler = orion_timer_interrupt
-};
-
void __init
orion_time_set_base(void __iomem *_timer_base)
{
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Setup clockevent timer (interrupt-driven).
*/
- setup_irq(irq, &orion_timer_irq);
+ if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "orion_tick");
orion_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
}
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 08/18] MIPS: Replace setup_irq() by request_irq()
2020-02-12 8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
@ 2020-02-12 8:04 ` afzal mohammed
2020-02-12 8:05 ` [PATCH 16/18] clocksource: " afzal mohammed
2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
3 siblings, 0 replies; 15+ messages in thread
From: afzal mohammed @ 2020-02-12 8:04 UTC (permalink / raw)
To: linux-mips, linux-kernel, linux-arm-kernel
Cc: Kate Stewart, Florian Fainelli, Arnd Bergmann, Paul Burton,
Richard Fontana, Greg Kroah-Hartman, Yifeng Li, Jiaxun Yang,
Thomas Bogendoerfer, Alexios Zavras, bcm-kernel-feedback-list,
Ralf Baechle, Maciej W. Rozycki, John Crispin, Jilayne Lovejoy,
Huacai Chen, Thomas Gleixner, Keguang Zhang, Allison Randal,
Steve Winslow
request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com
arch/mips/alchemy/common/time.c | 11 +---
arch/mips/ar7/irq.c | 18 +++---
arch/mips/ath25/ar2315.c | 9 +--
arch/mips/ath25/ar5312.c | 9 +--
arch/mips/bcm63xx/irq.c | 38 +++++-------
arch/mips/cobalt/irq.c | 14 ++---
arch/mips/dec/setup.c | 59 ++++++++-----------
arch/mips/emma/markeins/irq.c | 20 +++----
arch/mips/include/asm/sni.h | 2 +-
arch/mips/jazz/irq.c | 12 +---
arch/mips/kernel/cevt-bcm1480.c | 11 +---
arch/mips/kernel/cevt-ds1287.c | 9 +--
arch/mips/kernel/cevt-gt641xx.c | 9 +--
arch/mips/kernel/cevt-r4k.c | 4 +-
arch/mips/kernel/cevt-sb1250.c | 11 +---
arch/mips/kernel/cevt-txx9.c | 11 +---
arch/mips/kernel/i8253.c | 10 +---
arch/mips/kernel/rtlx-mt.c | 8 +--
arch/mips/kernel/smp.c | 33 ++++-------
arch/mips/lasat/interrupt.c | 10 +---
arch/mips/loongson2ef/common/bonito-irq.c | 9 +--
.../loongson2ef/common/cs5536/cs5536_mfgpt.c | 10 +---
arch/mips/loongson2ef/fuloong-2e/irq.c | 14 ++---
arch/mips/loongson2ef/lemote-2f/irq.c | 20 ++-----
arch/mips/loongson32/common/irq.c | 21 ++++---
arch/mips/loongson32/common/time.c | 12 ++--
arch/mips/loongson64/hpet.c | 10 +---
arch/mips/mti-malta/malta-int.c | 10 +---
arch/mips/netlogic/xlr/fmn.c | 9 +--
arch/mips/pmcs-msp71xx/msp_irq.c | 28 ++++-----
arch/mips/pmcs-msp71xx/msp_smp.c | 22 ++-----
arch/mips/pmcs-msp71xx/msp_time.c | 7 ++-
arch/mips/ralink/cevt-rt3352.c | 17 +++---
arch/mips/sgi-ip22/ip22-eisa.c | 8 +--
arch/mips/sgi-ip22/ip22-int.c | 49 +++++----------
arch/mips/sgi-ip32/ip32-irq.c | 18 ++----
arch/mips/sni/a20r.c | 4 +-
arch/mips/sni/irq.c | 8 +--
arch/mips/sni/pcit.c | 8 ++-
arch/mips/sni/rm200.c | 23 +++-----
arch/mips/sni/time.c | 10 +---
arch/mips/vr41xx/common/irq.c | 9 +--
42 files changed, 228 insertions(+), 406 deletions(-)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 3a21a6a18da7..7d6b1532221a 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.cpumask = cpu_possible_mask,
};
-static struct irqaction au1x_rtcmatch2_irqaction = {
- .handler = au1x_rtcmatch2_irq,
- .flags = IRQF_TIMER,
- .name = "timer",
- .dev_id = &au1x_rtcmatch2_clockdev,
-};
-
static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
@@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
cd->min_delta_ns = clockevent_delta2ns(9, cd);
cd->min_delta_ticks = 9; /* ~0.28ms */
clockevents_register_device(cd);
- setup_irq(m2int, &au1x_rtcmatch2_irqaction);
+ if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+ &au1x_rtcmatch2_clockdev))
+ pr_err("request_irq() on %s failed\n", "timer");
printk(KERN_INFO "Alchemy clocksource installed\n");
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
index 93a331fe0641..4e55e83078a8 100644
--- a/arch/mips/ar7/irq.c
+++ b/arch/mips/ar7/irq.c
@@ -83,12 +83,6 @@ static struct irq_chip ar7_sec_irq_type = {
.irq_ack = ar7_ack_sec_irq,
};
-static struct irqaction ar7_cascade_action = {
- .handler = no_action,
- .name = "AR7 cascade interrupt",
- .flags = IRQF_NO_THREAD,
-};
-
static void __init ar7_irq_init(int base)
{
int i;
@@ -116,8 +110,16 @@ static void __init ar7_irq_init(int base)
handle_level_irq);
}
- setup_irq(2, &ar7_cascade_action);
- setup_irq(ar7_irq_base, &ar7_cascade_action);
+ if (request_irq(2, no_action, IRQF_NO_THREAD, "AR7 cascade interrupt",
+ NULL)) {
+ pr_err("request_irq() on %s failed\n",
+ "AR7 cascade interrupt");
+ }
+ if (request_irq(ar7_irq_base, no_action, IRQF_NO_THREAD,
+ "AR7 cascade interrupt", NULL)) {
+ pr_err("request_irq() on %s failed\n",
+ "AR7 cascade interrupt");
+ }
set_c0_status(IE_IRQ0);
}
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
index 24f619199ee7..0f292b7f47ec 100644
--- a/arch/mips/ath25/ar2315.c
+++ b/arch/mips/ath25/ar2315.c
@@ -64,11 +64,6 @@ static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ar2315_ahb_err_interrupt = {
- .handler = ar2315_ahb_err_handler,
- .name = "ar2315-ahb-error",
-};
-
static void ar2315_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
@@ -159,7 +154,9 @@ void __init ar2315_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
- setup_irq(irq, &ar2315_ahb_err_interrupt);
+ if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "ar2315-ahb-error");
irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
ar2315_misc_irq_handler, domain);
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
index 47f3e98974fc..2ea2a7a999bf 100644
--- a/arch/mips/ath25/ar5312.c
+++ b/arch/mips/ath25/ar5312.c
@@ -68,11 +68,6 @@ static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ar5312_ahb_err_interrupt = {
- .handler = ar5312_ahb_err_handler,
- .name = "ar5312-ahb-error",
-};
-
static void ar5312_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
@@ -154,7 +149,9 @@ void __init ar5312_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
- setup_irq(irq, &ar5312_ahb_err_interrupt);
+ if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "ar5312-ahb-error");
irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
ar5312_misc_irq_handler, domain);
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index ec694b9628c0..e7a386a1a080 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -399,26 +399,6 @@ static struct irq_chip bcm63xx_external_irq_chip = {
.irq_set_type = bcm63xx_external_irq_set_type,
};
-static struct irqaction cpu_ip2_cascade_action = {
- .handler = no_action,
- .name = "cascade_ip2",
- .flags = IRQF_NO_THREAD,
-};
-
-#ifdef CONFIG_SMP
-static struct irqaction cpu_ip3_cascade_action = {
- .handler = no_action,
- .name = "cascade_ip3",
- .flags = IRQF_NO_THREAD,
-};
-#endif
-
-static struct irqaction cpu_ext_cascade_action = {
- .handler = no_action,
- .name = "cascade_extirq",
- .flags = IRQF_NO_THREAD,
-};
-
static void bcm63xx_init_irq(void)
{
int irq_bits;
@@ -544,14 +524,24 @@ void __init arch_init_irq(void)
handle_edge_irq);
if (!is_ext_irq_cascaded) {
- for (i = 3; i < 3 + ext_irq_count; ++i)
- setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+ for (i = 3; i < 3 + ext_irq_count; ++i) {
+ if (request_irq(MIPS_CPU_IRQ_BASE + i, no_action,
+ IRQF_NO_THREAD, "cascade_extirq",
+ NULL)) {
+ pr_err("request_irq() on %s failed\n",
+ "cascade_extirq");
+ }
+ }
}
- setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+ if (request_irq(MIPS_CPU_IRQ_BASE + 2, no_action, IRQF_NO_THREAD,
+ "cascade_ip2", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade_ip2");
#ifdef CONFIG_SMP
if (is_ext_irq_cascaded) {
- setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+ if (request_irq(MIPS_CPU_IRQ_BASE + 3, no_action,
+ IRQF_NO_THREAD, "cascade_ip3", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade_ip3");
bcm63xx_internal_irq_chip.irq_set_affinity =
bcm63xx_internal_set_affinity;
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 965c777d3561..266b15f058a8 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -45,18 +45,16 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
-static struct irqaction cascade = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
gt641xx_irq_init();
init_i8259_irqs();
- setup_irq(GT641XX_CASCADE_IRQ, &cascade);
- setup_irq(I8259_CASCADE_IRQ, &cascade);
+ if (request_irq(GT641XX_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+ "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(I8259_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
+ "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 61a0bf13e308..c2e73f61207d 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -103,28 +103,8 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
int *fpu_kstat_irq;
-static struct irqaction ioirq = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-static struct irqaction fpuirq = {
- .handler = no_action,
- .name = "fpu",
- .flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction busirq = {
- .name = "bus error",
- .flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction haltirq = {
- .handler = dec_intr_halt,
- .name = "halt",
- .flags = IRQF_NO_THREAD,
-};
-
+static irq_handler_t busirq_handler;
+static unsigned int busirq_flags = IRQF_NO_THREAD;
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
@@ -134,21 +114,21 @@ static void __init dec_be_init(void)
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
board_be_handler = dec_kn01_be_handler;
- busirq.handler = dec_kn01_be_interrupt;
- busirq.flags |= IRQF_SHARED;
+ busirq_handler = dec_kn01_be_interrupt;
+ busirq_flags |= IRQF_SHARED;
dec_kn01_be_init();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
case MACH_DS5000_XX: /* DS5000/xx Maxine */
board_be_handler = dec_kn02xa_be_handler;
- busirq.handler = dec_kn02xa_be_interrupt;
+ busirq_handler = dec_kn02xa_be_interrupt;
dec_kn02xa_be_init();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
case MACH_DS5900: /* DS5900 bigmax */
board_be_handler = dec_ecc_be_handler;
- busirq.handler = dec_ecc_be_interrupt;
+ busirq_handler = dec_ecc_be_interrupt;
dec_ecc_be_init();
break;
}
@@ -764,20 +744,29 @@ void __init arch_init_irq(void)
int irq_fpu;
irq_fpu = dec_interrupt[DEC_IRQ_FPU];
- setup_irq(irq_fpu, &fpuirq);
+ if (request_irq(irq_fpu, no_action, IRQF_NO_THREAD, "fpu",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "fpu");
desc_fpu = irq_to_desc(irq_fpu);
fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
}
- if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
- setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
-
+ if (dec_interrupt[DEC_IRQ_CASCADE] >= 0) {
+ if (request_irq(dec_interrupt[DEC_IRQ_CASCADE], no_action,
+ IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ }
/* Register the bus error interrupt. */
- if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
- setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
-
+ if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
+ if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
+ busirq_flags, "bus error", NULL))
+ pr_err("request_irq() on %s failed\n", "bus error");
+ }
/* Register the HALT interrupt. */
- if (dec_interrupt[DEC_IRQ_HALT] >= 0)
- setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
+ if (dec_interrupt[DEC_IRQ_HALT] >= 0) {
+ if (request_irq(dec_interrupt[DEC_IRQ_HALT], dec_intr_halt,
+ IRQF_NO_THREAD, "halt", NULL))
+ pr_err("request_irq() on %s failed\n", "halt");
+ }
}
asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 09427a49e7ae..88842c22eba7 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -153,14 +153,6 @@ void emma2rh_gpio_irq_init(void)
handle_edge_irq, "edge");
}
-static struct irqaction irq_cascade = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "cascade",
- .dev_id = NULL,
- .next = NULL,
-};
-
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
@@ -272,9 +264,15 @@ void __init arch_init_irq(void)
mips_cpu_irq_init();
/* setup cascade interrupts */
- setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
- setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
- setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
+ if (request_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, no_action,
+ IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, no_action,
+ IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(MIPS_CPU_IRQ_BASE + 2, no_action, IRQF_NO_THREAD,
+ "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
asmlinkage void plat_irq_dispatch(void)
diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h
index a107201a2e1e..b8653de25ca1 100644
--- a/arch/mips/include/asm/sni.h
+++ b/arch/mips/include/asm/sni.h
@@ -239,6 +239,6 @@ static inline int sni_eisa_root_init(void)
/* common irq stuff */
extern void (*sni_hwint)(void);
-extern struct irqaction sni_isa_irq;
+extern irqreturn_t sni_isa_irq_handler(int dummy, void *p);
#endif /* __ASM_SNI_H */
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 5d6828b2a750..b6110d19c1da 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -125,24 +125,18 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction r4030_timer_irqaction = {
- .handler = r4030_timer_interrupt,
- .flags = IRQF_TIMER,
- .name = "R4030 timer",
-};
-
void __init plat_time_init(void)
{
struct clock_event_device *cd = &r4030_clockevent;
- struct irqaction *action = &r4030_timer_irqaction;
unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
cd->cpumask = cpumask_of(cpu);
clockevents_register_device(cd);
- action->dev_id = cd;
- setup_irq(JAZZ_TIMER_IRQ, action);
+ if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
+ "R4030 timer", cd))
+ pr_err("request_irq() on %s failed\n", "R4030 timer");
/*
* Set clock to 100Hz.
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index b3e8c11a8fa5..8d1c44d31f3e 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -91,14 +91,12 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
@@ -133,11 +131,8 @@ void sb1480_clockevent_init(void)
bcm1480_unmask_irq(cpu, irq);
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_PERCPU | IRQF_TIMER;
- action->name = name;
- action->dev_id = cd;
-
irq_set_affinity(irq, cpumask_of(cpu));
- setup_irq(irq, action);
+ if (request_irq(irq, sibyte_counter_handler, IRQF_PERCPU | IRQF_TIMER,
+ name, cd))
+ pr_err("request_irq() on %s failed\n", name);
}
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1e1edab4a63f..9b855257fc65 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -100,12 +100,6 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ds1287_irqaction = {
- .handler = ds1287_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "ds1287",
-};
-
int __init ds1287_clockevent_init(int irq)
{
struct clock_event_device *cd;
@@ -122,5 +116,6 @@ int __init ds1287_clockevent_init(int irq)
clockevents_register_device(&ds1287_clockevent);
- return setup_irq(irq, &ds1287_irqaction);
+ return request_irq(irq, ds1287_interrupt, IRQF_PERCPU | IRQF_TIMER,
+ "ds1287", NULL);
}
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index eb53548d2538..5b132e8c51da 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -120,12 +120,6 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction gt641xx_timer0_irqaction = {
- .handler = gt641xx_timer0_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "gt641xx_timer0",
-};
-
static int __init gt641xx_timer0_clockevent_init(void)
{
struct clock_event_device *cd;
@@ -146,6 +140,7 @@ static int __init gt641xx_timer0_clockevent_init(void)
clockevents_register_device(>641xx_timer0_clockevent);
- return setup_irq(GT641XX_TIMER0_IRQ, >641xx_timer0_irqaction);
+ return request_irq(GT641XX_TIMER0_IRQ, gt641xx_timer0_interrupt,
+ IRQF_PERCPU | IRQF_TIMER, "gt641xx_timer0", NULL);
}
arch_initcall(gt641xx_timer0_clockevent_init);
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index dd6a18bc10ab..a3476e00ea67 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -291,7 +291,9 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
- setup_irq(irq, &c0_compare_irqaction);
+ if (request_irq(irq, c0_compare_interrupt,
+ IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED, "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
return 0;
}
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
index e1a08606c27e..f32896de0880 100644
--- a/arch/mips/kernel/cevt-sb1250.c
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -90,14 +90,12 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1250_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
@@ -133,11 +131,8 @@ void sb1250_clockevent_init(void)
sb1250_unmask_irq(cpu, irq);
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_PERCPU | IRQF_TIMER;
- action->name = name;
- action->dev_id = cd;
-
irq_set_affinity(irq, cpumask_of(cpu));
- setup_irq(irq, action);
+ if (request_irq(irq, sibyte_counter_handler, IRQF_PERCPU | IRQF_TIMER,
+ name, cd))
+ pr_err("request_irq() on %s failed\n", name);
}
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 7b17c8f5009d..4704127d5dc2 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -174,13 +174,6 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction txx9tmr_irq = {
- .handler = txx9tmr_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "txx9tmr",
- .dev_id = &txx9_clock_event_device,
-};
-
void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
unsigned int imbusclk)
{
@@ -202,7 +195,9 @@ void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
cd->irq = irq;
cd->cpumask = cpumask_of(0),
clockevents_register_device(cd);
- setup_irq(irq, &txx9tmr_irq);
+ if (request_irq(irq, txx9tmr_interrupt, IRQF_PERCPU | IRQF_TIMER,
+ "txx9tmr", &txx9_clock_event_device))
+ pr_err("request_irq() on %s failed\n", "txx9tmr");
printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
baseaddr, irq);
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index df7ddd246eaa..3d0b64e31f9e 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -18,16 +18,12 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_NOBALANCING | IRQF_TIMER,
- .name = "timer"
-};
-
void __init setup_pit_timer(void)
{
clockevent_i8253_init(true);
- setup_irq(0, &irq0);
+ if (request_irq(0, timer_interrupt, IRQF_NOBALANCING | IRQF_TIMER,
+ "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
}
static int __init init_pit_clocksource(void)
diff --git a/arch/mips/kernel/rtlx-mt.c b/arch/mips/kernel/rtlx-mt.c
index cb95470e2e69..38c6925a1bea 100644
--- a/arch/mips/kernel/rtlx-mt.c
+++ b/arch/mips/kernel/rtlx-mt.c
@@ -51,11 +51,6 @@ static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction rtlx_irq = {
- .handler = rtlx_interrupt,
- .name = "RTLX",
-};
-
static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
void _interrupt_sp(void)
@@ -124,8 +119,7 @@ int __init rtlx_module_init(void)
goto out_class;
}
- rtlx_irq.dev_id = rtlx;
- err = setup_irq(rtlx_irq_num, &rtlx_irq);
+ err = request_irq(rtlx_irq_num, rtlx_interrupt, 0, "RTLX", rtlx);
if (err)
goto out_class;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index f510c00bda88..d0e911f2421b 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -207,25 +207,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI call"
-};
-
-static void smp_ipi_init_one(unsigned int virq,
- struct irqaction *action)
+static void smp_ipi_init_one(unsigned int virq, const char *name,
+ irq_handler_t handler)
{
int ret;
irq_set_handler(virq, handle_percpu_irq);
- ret = setup_irq(virq, action);
+ ret = request_irq(virq, handler, IRQF_PERCPU, name, NULL);
BUG_ON(ret);
}
@@ -278,12 +266,15 @@ int mips_smp_ipi_allocate(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
- smp_ipi_init_one(call_virq + cpu, &irq_call);
- smp_ipi_init_one(sched_virq + cpu, &irq_resched);
+ smp_ipi_init_one(call_virq + cpu, "IPI call",
+ ipi_call_interrupt);
+ smp_ipi_init_one(sched_virq + cpu, "IPI resched",
+ ipi_resched_interrupt);
}
} else {
- smp_ipi_init_one(call_virq, &irq_call);
- smp_ipi_init_one(sched_virq, &irq_resched);
+ smp_ipi_init_one(call_virq, "IPI call", ipi_call_interrupt);
+ smp_ipi_init_one(sched_virq, "IPI resched",
+ ipi_resched_interrupt);
}
return 0;
@@ -311,8 +302,8 @@ int mips_smp_ipi_free(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
- remove_irq(call_virq + cpu, &irq_call);
- remove_irq(sched_virq + cpu, &irq_resched);
+ free_irq(call_virq + cpu, NULL);
+ free_irq(sched_virq + cpu, NULL);
}
}
irq_destroy_ipi(call_virq, mask);
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index 0f3a8975081d..757ad18ad586 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -90,12 +90,6 @@ asmlinkage void plat_irq_dispatch(void)
}
}
-static struct irqaction cascade = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
void __init arch_init_irq(void)
{
int i;
@@ -119,5 +113,7 @@ void __init arch_init_irq(void)
for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
- setup_irq(LASAT_CASCADE_IRQ, &cascade);
+ if (request_irq(LASAT_CASCADE_IRQ, no_action, IRQF_NO_THREAD, "cascade",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
diff --git a/arch/mips/loongson2ef/common/bonito-irq.c b/arch/mips/loongson2ef/common/bonito-irq.c
index 82352cc25e4c..646f93fea506 100644
--- a/arch/mips/loongson2ef/common/bonito-irq.c
+++ b/arch/mips/loongson2ef/common/bonito-irq.c
@@ -30,11 +30,6 @@ static struct irq_chip bonito_irq_type = {
.irq_unmask = bonito_irq_enable,
};
-static struct irqaction __maybe_unused dma_timeout_irqaction = {
- .handler = no_action,
- .name = "dma_timeout",
-};
-
void bonito_irq_init(void)
{
u32 i;
@@ -44,6 +39,8 @@ void bonito_irq_init(void)
handle_level_irq);
#ifdef CONFIG_CPU_LOONGSON2E
- setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+ if (request_irq(LOONGSON_IRQ_BASE + 10, no_action, 0, "dma_timeout",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "dma_timeout");
#endif
}
diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c
index 30af1b7c7529..9d63033f4a89 100644
--- a/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c
@@ -100,12 +100,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction irq5 = {
- .handler = timer_interrupt,
- .flags = IRQF_NOBALANCING | IRQF_TIMER,
- .name = "timer"
-};
-
/*
* Initialize the conversion factor and the min/max deltas of the clock event
* structure and register the clock event source with the framework.
@@ -134,7 +128,9 @@ void __init setup_mfgpt0_timer(void)
clockevents_register_device(cd);
- setup_irq(CS5536_MFGPT_INTR, &irq5);
+ if (request_irq(CS5536_MFGPT_INTR, timer_interrupt,
+ IRQF_NOBALANCING | IRQF_TIMER, "timer", NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
}
/*
diff --git a/arch/mips/loongson2ef/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c
index 32278e7bf85c..23218b32a013 100644
--- a/arch/mips/loongson2ef/fuloong-2e/irq.c
+++ b/arch/mips/loongson2ef/fuloong-2e/irq.c
@@ -35,12 +35,6 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
spurious_interrupt();
}
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
void __init mach_init_irq(void)
{
/* init all controller
@@ -59,7 +53,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* bonito irq at IP2 */
- setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
+ if (request_irq(MIPS_CPU_IRQ_BASE + 2, no_action, IRQF_NO_THREAD,
+ "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
/* 8259 irq at IP5 */
- setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
+ if (request_irq(MIPS_CPU_IRQ_BASE + 5, no_action, IRQF_NO_THREAD,
+ "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index c58a044c6c07..a40d17351af3 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -90,18 +90,6 @@ static irqreturn_t ip6_action(int cpl, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ip6_irqaction = {
- .handler = ip6_action,
- .name = "cascade",
- .flags = IRQF_SHARED | IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
-};
-
void __init mach_init_irq(void)
{
/* init all controller
@@ -120,7 +108,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* setup north bridge irq (bonito) */
- setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+ if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
+ IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
/* setup source bridge irq (i8259) */
- setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+ if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
+ IRQF_NO_THREAD | IRQF_NO_SUSPEND, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
index 168d221d4178..8d09c2525aa9 100644
--- a/arch/mips/loongson32/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
@@ -149,12 +149,6 @@ asmlinkage void plat_irq_dispatch(void)
}
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
static void __init ls1x_irq_init(int base)
{
int n;
@@ -176,12 +170,17 @@ static void __init ls1x_irq_init(int base)
handle_level_irq);
}
- setup_irq(INT0_IRQ, &cascade_irqaction);
- setup_irq(INT1_IRQ, &cascade_irqaction);
- setup_irq(INT2_IRQ, &cascade_irqaction);
- setup_irq(INT3_IRQ, &cascade_irqaction);
+ if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
+ if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
#if defined(CONFIG_LOONGSON1_LS1C)
- setup_irq(INT4_IRQ, &cascade_irqaction);
+ if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
#endif
}
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
index 4cc73f7ac0d4..3981226f8a3b 100644
--- a/arch/mips/loongson32/common/time.c
+++ b/arch/mips/loongson32/common/time.c
@@ -176,13 +176,6 @@ static struct clock_event_device ls1x_clockevent = {
.tick_resume = ls1x_clockevent_tick_resume,
};
-static struct irqaction ls1x_pwmtimer_irqaction = {
- .name = "ls1x-pwmtimer",
- .handler = ls1x_clockevent_isr,
- .dev_id = &ls1x_clockevent,
- .flags = IRQF_PERCPU | IRQF_TIMER,
-};
-
static void __init ls1x_time_init(void)
{
struct clock_event_device *cd = &ls1x_clockevent;
@@ -206,7 +199,10 @@ static void __init ls1x_time_init(void)
if (ret)
panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
- setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
+ if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
+ IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
+ &ls1x_clockevent))
+ pr_err("request_irq() on %s failed\n", "ls1x-pwmtimer");
}
#endif /* CONFIG_CEVT_CSRC_LS1X */
diff --git a/arch/mips/loongson64/hpet.c b/arch/mips/loongson64/hpet.c
index ed15430ad64f..19c21b2f5ef3 100644
--- a/arch/mips/loongson64/hpet.c
+++ b/arch/mips/loongson64/hpet.c
@@ -187,12 +187,6 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
return IRQ_NONE;
}
-static struct irqaction hpet_irq = {
- .handler = hpet_irq_handler,
- .flags = IRQF_NOBALANCING | IRQF_TIMER,
- .name = "hpet",
-};
-
/*
* hpet address assignation and irq setting should be done in bios.
* but pmon don't do this, we just setup here directly.
@@ -247,7 +241,9 @@ void __init setup_hpet_timer(void)
cd->min_delta_ticks = HPET_MIN_PROG_DELTA;
clockevents_register_device(cd);
- setup_irq(HPET_T0_IRQ, &hpet_irq);
+ if (request_irq(HPET_T0_IRQ, hpet_irq_handler,
+ IRQF_NOBALANCING | IRQF_TIMER, "hpet", NULL))
+ pr_err("request_irq() on %s failed\n", "hpet");
pr_info("hpet clock event device register\n");
}
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index a840e0c1642c..3e54c9c6b61b 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -144,12 +144,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction corehi_irqaction = {
- .handler = corehi_handler,
- .name = "CoreHi",
- .flags = IRQF_NO_THREAD,
-};
-
static msc_irqmap_t msc_irqmap[] __initdata = {
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
@@ -223,5 +217,7 @@ void __init arch_init_irq(void)
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
}
- setup_irq(corehi_irq, &corehi_irqaction);
+ if (request_irq(corehi_irq, corehi_handler, IRQF_NO_THREAD, "CoreHi",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "CoreHi");
}
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..b7b575a63e44 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -110,12 +110,6 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
return IRQ_HANDLED;
}
-struct irqaction fmn_irqaction = {
- .handler = fmn_message_handler,
- .flags = IRQF_PERCPU,
- .name = "fmn",
-};
-
void xlr_percpu_fmn_init(void)
{
struct xlr_fmn_info *cpu_fmn_info;
@@ -196,7 +190,8 @@ void nlm_setup_fmn_irq(void)
uint32_t flags;
/* setup irq only once */
- setup_irq(IRQ_FMN, &fmn_irqaction);
+ if (request_irq(IRQ_FMN, fmn_message_handler, IRQF_PERCPU, "fmn", NULL))
+ pr_err("request_irq() on %s failed\n", "fmn");
flags = nlm_cop2_enable_irqsave();
nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
index 8d53d7a2ed45..aff7b9b89bab 100644
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -107,18 +107,6 @@ asmlinkage void plat_irq_dispatch(void)
do_IRQ(MSP_INT_SW1);
}
-static struct irqaction cic_cascade_msp = {
- .handler = no_action,
- .name = "MSP CIC cascade",
- .flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction per_cascade_msp = {
- .handler = no_action,
- .name = "MSP PER cascade",
- .flags = IRQF_NO_THREAD,
-};
-
void __init arch_init_irq(void)
{
/* assume we'll be using vectored interrupt mode except in UP mode*/
@@ -142,8 +130,12 @@ void __init arch_init_irq(void)
#endif /* CONFIG_MIPS_MT_SMP */
#endif /* CONFIG_MIPS_MT */
/* setup the cascaded interrupts */
- setup_irq(MSP_INT_CIC, &cic_cascade_msp);
- setup_irq(MSP_INT_PER, &per_cascade_msp);
+ if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD,
+ "MSP CIC cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "MSP CIC cascade");
+ if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
+ "MSP PER cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "MSP PER cascade");
#else
/*
@@ -153,7 +145,11 @@ void __init arch_init_irq(void)
msp_slp_irq_init();
/* setup the cascaded SLP/PER interrupts */
- setup_irq(MSP_INT_SLP, &cic_cascade_msp);
- setup_irq(MSP_INT_PER, &per_cascade_msp);
+ if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD,
+ "MSP CIC cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "MSP CIC cascade");
+ if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
+ "MSP PER cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "MSP PER cascade");
#endif
}
diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c
index 8f00d26f2a53..f5a828a36535 100644
--- a/arch/mips/pmcs-msp71xx/msp_smp.c
+++ b/arch/mips/pmcs-msp71xx/msp_smp.c
@@ -38,21 +38,10 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_call"
-};
-
-void __init arch_init_ipiirq(int irq, struct irqaction *action)
+void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler)
{
- setup_irq(irq, action);
+ if (request_irq(irq, handler, IRQF_PERCPU, name, NULL))
+ pr_err("request_irq() on %s failed\n", name);
irq_set_handler(irq, handle_percpu_irq);
}
@@ -60,7 +49,8 @@ void __init msp_vsmp_int_init(void)
{
set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
- arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched);
- arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call);
+ arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched",
+ ipi_resched_interrupt);
+ arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt);
}
#endif /* CONFIG_MIPS_MT_SMP */
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
index d83de01f00b8..3acf9b6670b3 100644
--- a/arch/mips/pmcs-msp71xx/msp_time.c
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -27,7 +27,6 @@
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-static struct irqaction timer_vpe1;
static int tim_installed;
void __init plat_time_init(void)
@@ -79,8 +78,10 @@ unsigned int get_c0_compare_int(void)
{
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
- memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1));
- setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1);
+ if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt,
+ IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED, "timer",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "timer");
tim_installed++;
}
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index 61a08943eb2f..d98d9b68fc70 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -82,12 +82,6 @@ static struct systick_device systick = {
},
};
-static struct irqaction systick_irqaction = {
- .handler = systick_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .dev_id = &systick.dev,
-};
-
static int systick_shutdown(struct clock_event_device *evt)
{
struct systick_device *sdev;
@@ -108,8 +102,14 @@ static int systick_set_oneshot(struct clock_event_device *evt)
sdev = container_of(evt, struct systick_device, dev);
- if (!sdev->irq_requested)
- setup_irq(systick.dev.irq, &systick_irqaction);
+ if (!sdev->irq_requested) {
+ if (request_irq(systick.dev.irq, systick_interrupt,
+ IRQF_PERCPU | IRQF_TIMER, systick.dev.name,
+ &systick.dev)) {
+ pr_err("request_irq() on %s failed\n",
+ systick.dev.name);
+ }
+ }
sdev->irq_requested = 1;
iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
systick.membase + SYSTICK_CONFIG);
@@ -125,7 +125,6 @@ static int __init ralink_systick_init(struct device_node *np)
if (!systick.membase)
return -ENXIO;
- systick_irqaction.name = np->name;
systick.dev.name = np->name;
clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index a0a79222ce0b..cdf432990588 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -92,11 +92,6 @@ static irqreturn_t ip22_eisa_intr(int irq, void *dev_id)
return IRQ_NONE;
}
-static struct irqaction eisa_action = {
- .handler = ip22_eisa_intr,
- .name = "EISA",
-};
-
int __init ip22_eisa_init(void)
{
int i, c;
@@ -138,7 +133,8 @@ int __init ip22_eisa_init(void)
/* Cannot use request_irq because of kmalloc not being ready at such
* an early stage. Yes, I've been bitten... */
- setup_irq(SGI_EISA_IRQ, &eisa_action);
+ if (request_irq(SGI_EISA_IRQ, ip22_eisa_intr, 0, "EISA", NULL))
+ pr_err("request_irq() on %s failed\n", "EISA");
EISA_bus = 1;
return 0;
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index 3804895fa697..e6d4133e99f6 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -159,36 +159,7 @@ static void __irq_entry indy_buserror_irq(void)
irq_exit();
}
-static struct irqaction local0_cascade = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "local0 cascade",
-};
-
-static struct irqaction local1_cascade = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "local1 cascade",
-};
-
-static struct irqaction buserr = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "Bus Error",
-};
-
-static struct irqaction map0_cascade = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "mapable0 cascade",
-};
-
#ifdef USE_LIO3_IRQ
-static struct irqaction map1_cascade = {
- .handler = no_action,
- .flags = IRQF_NO_THREAD,
- .name = "mapable1 cascade",
-};
#define SGI_INTERRUPTS SGINT_END
#else
#define SGI_INTERRUPTS SGINT_LOCAL3
@@ -322,14 +293,24 @@ void __init arch_init_irq(void)
}
/* vector handler. this register the IRQ as non-sharable */
- setup_irq(SGI_LOCAL_0_IRQ, &local0_cascade);
- setup_irq(SGI_LOCAL_1_IRQ, &local1_cascade);
- setup_irq(SGI_BUSERR_IRQ, &buserr);
+ if (request_irq(SGI_LOCAL_0_IRQ, no_action, IRQF_NO_THREAD,
+ "local0 cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "local0 cascade");
+ if (request_irq(SGI_LOCAL_1_IRQ, no_action, IRQF_NO_THREAD,
+ "local1 cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "local1 cascade");
+ if (request_irq(SGI_BUSERR_IRQ, no_action, IRQF_NO_THREAD, "Bus Error",
+ NULL))
+ pr_err("request_irq() on %s failed\n", "Bus Error");
/* cascade in cascade. i love Indy ;-) */
- setup_irq(SGI_MAP_0_IRQ, &map0_cascade);
+ if (request_irq(SGI_MAP_0_IRQ, no_action, IRQF_NO_THREAD,
+ "mapable0 cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "mapable0 cascade");
#ifdef USE_LIO3_IRQ
- setup_irq(SGI_MAP_1_IRQ, &map1_cascade);
+ if (request_irq(SGI_MAP_1_IRQ, no_action, IRQF_NO_THREAD,
+ "mapable1 cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "mapable1 cascade");
#endif
#ifdef CONFIG_EISA
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index a6a0ff7f5aed..8d845747c137 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -111,16 +111,6 @@ static inline void flush_mace_bus(void)
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-static struct irqaction memerr_irq = {
- .handler = crime_memerr_intr,
- .name = "CRIME memory error",
-};
-
-static struct irqaction cpuerr_irq = {
- .handler = crime_cpuerr_intr,
- .name = "CRIME CPU error",
-};
-
/*
* This is for pure CRIME interrupts - ie not MACE. The advantage?
* We get to split the register in half and do faster lookups.
@@ -497,8 +487,12 @@ void __init arch_init_irq(void)
break;
}
}
- setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
- setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
+ if (request_irq(CRIME_MEMERR_IRQ, crime_memerr_intr, 0,
+ "CRIME memory error", NULL))
+ pr_err("request_irq() on %s failed\n", "CRIME memory error");
+ if (request_irq(CRIME_CPUERR_IRQ, crime_cpuerr_intr, 0,
+ "CRIME CPU error", NULL))
+ pr_err("request_irq() on %s failed\n", "CRIME CPU error");
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
change_c0_status(ST0_IM, ALLINTS);
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index f9407e170476..2cb1da5d206d 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -222,7 +222,9 @@ void __init sni_a20r_irq_init(void)
irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
+ if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
+ IRQF_SHARED, "ISA", NULL))
+ pr_err("request_irq() on %s failed\n", "ISA");
}
void sni_a20r_init(void)
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index ac61b90bcc66..dec89afc9886 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -27,7 +27,7 @@ asmlinkage void plat_irq_dispatch(void)
}
/* ISA irq handler */
-static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
+irqreturn_t sni_isa_irq_handler(int dummy, void *p)
{
int irq;
@@ -39,12 +39,6 @@ static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
return IRQ_HANDLED;
}
-struct irqaction sni_isa_irq = {
- .handler = sni_isa_irq_handler,
- .name = "ISA",
- .flags = IRQF_SHARED
-};
-
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8295
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 05bb51676e82..80ddd6b13e4d 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -244,7 +244,9 @@ void __init sni_pcit_irq_init(void)
*(volatile u32 *)SNI_PCIT_INT_REG = 0;
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
- setup_irq(SNI_PCIT_INT_START + 6, &sni_isa_irq);
+ if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
+ IRQF_SHARED, "ISA", NULL))
+ pr_err("request_irq() on %s failed\n", "ISA");
}
void __init sni_pcit_cplus_irq_init(void)
@@ -257,7 +259,9 @@ void __init sni_pcit_cplus_irq_init(void)
*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq(MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
+ if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
+ IRQF_SHARED, "ISA", NULL))
+ pr_err("request_irq() on %s failed\n", "ISA");
}
void __init sni_pcit_init(void)
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index f6fa9afcbfd3..00c55eacc3df 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -356,11 +356,6 @@ void sni_rm200_init_8259A(void)
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
-static struct irqaction sni_rm200_irq2 = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
static struct resource sni_rm200_pic1_resource = {
.name = "onboard ISA pic1",
@@ -389,12 +384,6 @@ static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p)
return IRQ_HANDLED;
}
-struct irqaction sni_rm200_i8259A_irq = {
- .handler = sni_rm200_i8259A_irq_handler,
- .name = "onboard ISA",
- .flags = IRQF_SHARED
-};
-
void __init sni_rm200_i8259_irqs(void)
{
int i;
@@ -417,7 +406,9 @@ void __init sni_rm200_i8259_irqs(void)
irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip,
handle_level_irq);
- setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2);
+ if (request_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, no_action,
+ IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("request_irq() on %s failed\n", "cascade");
}
@@ -481,8 +472,12 @@ void __init sni_rm200_irq_init(void)
irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
- setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq);
+ if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
+ IRQF_SHARED, "onboard ISA", NULL))
+ pr_err("request_irq() on %s failed\n", "onboard ISA");
+ if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
+ IRQF_SHARED, "ISA", NULL))
+ pr_err("request_irq() on %s failed\n", "ISA");
}
void __init sni_rm200_init(void)
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index dbace1f3e1a9..dcf94709ad64 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -55,12 +55,6 @@ static irqreturn_t a20r_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction a20r_irqaction = {
- .handler = a20r_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "a20r-timer",
-};
-
/*
* a20r platform uses 2 counters to divide the input frequency.
* Counter 2 output is connected to Counter 0 & 1 input.
@@ -74,7 +68,9 @@ static void __init sni_a20r_timer_setup(void)
cd->cpumask = cpumask_of(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
- setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
+ if (request_irq(SNI_A20R_IRQ_TIMER, a20r_interrupt,
+ IRQF_PERCPU | IRQF_TIMER, "a20r-timer", NULL))
+ pr_err("request_irq() on %s failed\n", "a20r-timer");
}
#define SNI_8254_TICK_RATE 1193182UL
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 7a826fbf9060..8f68446ff2d9 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -17,12 +17,6 @@ typedef struct irq_cascade {
static irq_cascade_t irq_cascade[NR_IRQS] __cacheline_aligned;
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
{
int retval = 0;
@@ -36,7 +30,8 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
irq_cascade[irq].get_irq = get_irq;
if (get_irq != NULL) {
- retval = setup_irq(irq, &cascade_irqaction);
+ retval = request_irq(irq, no_action, IRQF_NO_THREAD,
+ "cascade", NULL);
if (retval < 0)
irq_cascade[irq].get_irq = NULL;
}
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 16/18] clocksource: Replace setup_irq() by request_irq()
2020-02-12 8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
2020-02-12 8:04 ` [PATCH 08/18] MIPS: Replace " afzal mohammed
@ 2020-02-12 8:05 ` afzal mohammed
2020-02-20 11:13 ` Daniel Lezcano
2020-02-20 14:48 ` Linus Walleij
2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
3 siblings, 2 replies; 15+ messages in thread
From: afzal mohammed @ 2020-02-12 8:05 UTC (permalink / raw)
To: linux-kernel, linux-rpi-kernel, linux-arm-kernel,
linux-samsung-soc, linux-amlogic
Cc: Kate Stewart, Linus Walleij, Shawn Guo, Fabio Estevam,
Florian Fainelli, Kevin Hilman, Daniel Lezcano,
Krzysztof Kozlowski, Kukjin Kim, bcm-kernel-feedback-list,
NXP Linux Team, Uwe Kleine-König, Ray Jui, Sascha Hauer,
Thomas Gleixner, Allison Randal, Barry Song, Scott Branden,
Greg Kroah-Hartman, Tony Prisk, Pengutronix Kernel Team,
Enrico Weigelt, Nicolas Saenz Julienne
request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com
drivers/clocksource/bcm2835_timer.c | 8 +---
drivers/clocksource/bcm_kona_timer.c | 10 ++---
drivers/clocksource/dw_apb_timer.c | 11 ++---
drivers/clocksource/exynos_mct.c | 12 ++----
drivers/clocksource/mxs_timer.c | 10 +----
drivers/clocksource/nomadik-mtu.c | 11 ++---
drivers/clocksource/samsung_pwm_timer.c | 12 ++----
drivers/clocksource/timer-atlas7.c | 50 +++++++++++------------
drivers/clocksource/timer-cs5535.c | 10 ++---
drivers/clocksource/timer-efm32.c | 10 +----
drivers/clocksource/timer-fsl-ftm.c | 10 +----
drivers/clocksource/timer-imx-gpt.c | 10 +----
drivers/clocksource/timer-integrator-ap.c | 11 ++---
drivers/clocksource/timer-meson6.c | 11 ++---
drivers/clocksource/timer-orion.c | 9 +---
drivers/clocksource/timer-prima2.c | 11 +----
drivers/clocksource/timer-pxa.c | 10 +----
drivers/clocksource/timer-sp804.c | 11 ++---
drivers/clocksource/timer-u300.c | 9 +---
drivers/clocksource/timer-vf-pit.c | 10 +----
drivers/clocksource/timer-vt8500.c | 11 ++---
drivers/clocksource/timer-zevio.c | 13 +++---
include/linux/dw_apb_timer.h | 1 -
23 files changed, 81 insertions(+), 190 deletions(-)
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index b235f446ee50..1592650b2c92 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -31,7 +31,6 @@ struct bcm2835_timer {
void __iomem *compare;
int match_mask;
struct clock_event_device evt;
- struct irqaction act;
};
static void __iomem *system_clock __read_mostly;
@@ -113,12 +112,9 @@ static int __init bcm2835_timer_init(struct device_node *node)
timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
timer->evt.set_next_event = bcm2835_time_set_next_event;
timer->evt.cpumask = cpumask_of(0);
- timer->act.name = node->name;
- timer->act.flags = IRQF_TIMER | IRQF_SHARED;
- timer->act.dev_id = timer;
- timer->act.handler = bcm2835_time_interrupt;
- ret = setup_irq(irq, &timer->act);
+ ret = request_irq(irq, bcm2835_time_interrupt, IRQF_TIMER | IRQF_SHARED,
+ node->name, timer);
if (ret) {
pr_err("Can't set up timer IRQ\n");
goto err_timer_free;
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 5c40be9880f5..b57b2fbdac33 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -160,12 +160,6 @@ static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction kona_timer_irq = {
- .name = "Kona Timer Tick",
- .flags = IRQF_TIMER,
- .handler = kona_timer_interrupt,
-};
-
static int __init kona_timer_init(struct device_node *node)
{
u32 freq;
@@ -192,7 +186,9 @@ static int __init kona_timer_init(struct device_node *node)
kona_timer_disable_and_clear(timers.tmr_regs);
kona_timer_clockevents_init();
- setup_irq(timers.tmr_irq, &kona_timer_irq);
+ if (request_irq(timers.tmr_irq, kona_timer_interrupt, IRQF_TIMER,
+ "Kona Timer Tick", NULL))
+ pr_err("request_irq() on %s failed\n", "Kona Timer Tick");
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
return 0;
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 654766538f93..b207a77b0831 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -270,15 +270,10 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
dw_ced->ced.rating = rating;
dw_ced->ced.name = name;
- dw_ced->irqaction.name = dw_ced->ced.name;
- dw_ced->irqaction.handler = dw_apb_clockevent_irq;
- dw_ced->irqaction.dev_id = &dw_ced->ced;
- dw_ced->irqaction.irq = irq;
- dw_ced->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL |
- IRQF_NOBALANCING;
-
dw_ced->eoi = apbt_eoi;
- err = setup_irq(irq, &dw_ced->irqaction);
+ err = request_irq(irq, dw_apb_clockevent_irq,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dw_ced->ced.name, &dw_ced->ced);
if (err) {
pr_err("failed to request timer irq\n");
kfree(dw_ced);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index a267fe31ef13..cde7c00dbcff 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -329,19 +329,15 @@ static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction mct_comp_event_irq = {
- .name = "mct_comp_irq",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = exynos4_mct_comp_isr,
- .dev_id = &mct_comp_device,
-};
-
static int exynos4_clockevent_init(void)
{
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
- setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+ if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
+ IRQF_TIMER | IRQF_IRQPOLL, "mct_comp_irq",
+ &mct_comp_device))
+ pr_err("request_irq() on %s failed\n", "mct_comp_irq");
return 0;
}
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
index f6ddae30933f..bc96a4cbf26c 100644
--- a/drivers/clocksource/mxs_timer.c
+++ b/drivers/clocksource/mxs_timer.c
@@ -117,13 +117,6 @@ static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction mxs_timer_irq = {
- .name = "MXS Timer Tick",
- .dev_id = &mxs_clockevent_device,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = mxs_timer_interrupt,
-};
-
static void mxs_irq_clear(char *state)
{
/* Disable interrupt in timer module */
@@ -277,6 +270,7 @@ static int __init mxs_timer_init(struct device_node *np)
if (irq <= 0)
return -EINVAL;
- return setup_irq(irq, &mxs_timer_irq);
+ return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "MXS Timer Tick", &mxs_clockevent_device);
}
TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 3f7fa8c01367..8faa6616c5e5 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -181,13 +181,6 @@ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction nmdk_timer_irq = {
- .name = "Nomadik Timer Tick",
- .flags = IRQF_TIMER,
- .handler = nmdk_timer_interrupt,
- .dev_id = &nmdk_clkevt,
-};
-
static int __init nmdk_timer_init(void __iomem *base, int irq,
struct clk *pclk, struct clk *clk)
{
@@ -232,7 +225,9 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
sched_clock_register(nomadik_read_sched_clock, 32, rate);
/* Timer 1 is used for events, register irq and clockevents */
- setup_irq(irq, &nmdk_timer_irq);
+ if (request_irq(irq, nmdk_timer_interrupt, IRQF_TIMER,
+ "Nomadik Timer Tick", &nmdk_clkevt))
+ pr_err("request_irq() on %s failed\n", "Nomadik Timer Tick");
nmdk_clkevt.cpumask = cpumask_of(0);
nmdk_clkevt.irq = irq;
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index dae1b2b5a0c5..bad1d3bad532 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -256,13 +256,6 @@ static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction samsung_clock_event_irq = {
- .name = "samsung_time_irq",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = samsung_clock_event_isr,
- .dev_id = &time_event_device,
-};
-
static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
@@ -282,7 +275,10 @@ static void __init samsung_clockevent_init(void)
clock_rate, 1, pwm.tcnt_max);
irq_number = pwm.irq[pwm.event_id];
- setup_irq(irq_number, &samsung_clock_event_irq);
+ if (request_irq(irq_number, samsung_clock_event_isr,
+ IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
+ &time_event_device))
+ pr_err("request_irq() on %s failed\n", "samsung_time_irq");
if (pwm.variant.has_tint_cstat) {
u32 mask = (1 << pwm.event_id);
diff --git a/drivers/clocksource/timer-atlas7.c b/drivers/clocksource/timer-atlas7.c
index 93c3ac6d72bd..c21c91c2bc56 100644
--- a/drivers/clocksource/timer-atlas7.c
+++ b/drivers/clocksource/timer-atlas7.c
@@ -159,29 +159,23 @@ static struct clocksource sirfsoc_clocksource = {
.resume = sirfsoc_clocksource_resume,
};
-static struct irqaction sirfsoc_timer_irq = {
- .name = "sirfsoc_timer0",
- .flags = IRQF_TIMER | IRQF_NOBALANCING,
- .handler = sirfsoc_timer_interrupt,
-};
-
-static struct irqaction sirfsoc_timer1_irq = {
- .name = "sirfsoc_timer1",
- .flags = IRQF_TIMER | IRQF_NOBALANCING,
- .handler = sirfsoc_timer_interrupt,
-};
+static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq;
static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
{
struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
- struct irqaction *action;
-
- if (cpu == 0)
- action = &sirfsoc_timer_irq;
- else
- action = &sirfsoc_timer1_irq;
+ unsigned int irq;
+ const char *name;
+
+ if (cpu == 0) {
+ irq = sirfsoc_timer_irq;
+ name = "sirfsoc_timer0";
+ } else {
+ irq = sirfsoc_timer1_irq;
+ name = "sirfsoc_timer1";
+ }
- ce->irq = action->irq;
+ ce->irq = irq;
ce->name = "local_timer";
ce->features = CLOCK_EVT_FEAT_ONESHOT;
ce->rating = 200;
@@ -196,9 +190,9 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
ce->min_delta_ticks = 2;
ce->cpumask = cpumask_of(cpu);
- action->dev_id = ce;
- BUG_ON(setup_irq(ce->irq, action));
- irq_force_affinity(action->irq, cpumask_of(cpu));
+ BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING, name, ce));
+ irq_force_affinity(ce->irq, cpumask_of(cpu));
clockevents_register_device(ce);
return 0;
@@ -206,12 +200,14 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
static int sirfsoc_local_timer_dying_cpu(unsigned int cpu)
{
+ struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
+
sirfsoc_timer_count_disable(1);
if (cpu == 0)
- remove_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+ free_irq(sirfsoc_timer_irq, ce);
else
- remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
+ free_irq(sirfsoc_timer1_irq, ce);
return 0;
}
@@ -268,14 +264,14 @@ static int __init sirfsoc_of_timer_init(struct device_node *np)
return -ENXIO;
}
- sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
- if (!sirfsoc_timer_irq.irq) {
+ sirfsoc_timer_irq = irq_of_parse_and_map(np, 0);
+ if (!sirfsoc_timer_irq) {
pr_err("No irq passed for timer0 via DT\n");
return -EINVAL;
}
- sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
- if (!sirfsoc_timer1_irq.irq) {
+ sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1);
+ if (!sirfsoc_timer1_irq) {
pr_err("No irq passed for timer1 via DT\n");
return -EINVAL;
}
diff --git a/drivers/clocksource/timer-cs5535.c b/drivers/clocksource/timer-cs5535.c
index 8f6bc536bef2..51ea0509fb25 100644
--- a/drivers/clocksource/timer-cs5535.c
+++ b/drivers/clocksource/timer-cs5535.c
@@ -131,12 +131,6 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction mfgptirq = {
- .handler = mfgpt_tick,
- .flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
- .name = DRV_NAME,
-};
-
static int __init cs5535_mfgpt_init(void)
{
struct cs5535_mfgpt_timer *timer;
@@ -158,7 +152,9 @@ static int __init cs5535_mfgpt_init(void)
}
/* And register it with the kernel */
- ret = setup_irq(timer_irq, &mfgptirq);
+ ret = request_irq(timer_irq, mfgpt_tick,
+ IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
+ DRV_NAME, NULL);
if (ret) {
printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
goto err_irq;
diff --git a/drivers/clocksource/timer-efm32.c b/drivers/clocksource/timer-efm32.c
index 5a22cb079ad3..441a4b916841 100644
--- a/drivers/clocksource/timer-efm32.c
+++ b/drivers/clocksource/timer-efm32.c
@@ -119,13 +119,6 @@ static struct efm32_clock_event_ddata clock_event_ddata = {
},
};
-static struct irqaction efm32_clock_event_irq = {
- .name = "efm32 clockevent",
- .flags = IRQF_TIMER,
- .handler = efm32_clock_event_handler,
- .dev_id = &clock_event_ddata,
-};
-
static int __init efm32_clocksource_init(struct device_node *np)
{
struct clk *clk;
@@ -230,7 +223,8 @@ static int __init efm32_clockevent_init(struct device_node *np)
DIV_ROUND_CLOSEST(rate, 1024),
0xf, 0xffff);
- ret = setup_irq(irq, &efm32_clock_event_irq);
+ ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER,
+ "efm32 clockevent", &clock_event_ddata);
if (ret) {
pr_err("Failed setup irq\n");
goto err_setup_irq;
diff --git a/drivers/clocksource/timer-fsl-ftm.c b/drivers/clocksource/timer-fsl-ftm.c
index a9d9a3ca5996..12a2ed7cfaff 100644
--- a/drivers/clocksource/timer-fsl-ftm.c
+++ b/drivers/clocksource/timer-fsl-ftm.c
@@ -176,13 +176,6 @@ static struct clock_event_device ftm_clockevent = {
.rating = 300,
};
-static struct irqaction ftm_timer_irq = {
- .name = "Freescale ftm timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ftm_evt_interrupt,
- .dev_id = &ftm_clockevent,
-};
-
static int __init ftm_clockevent_init(unsigned long freq, int irq)
{
int err;
@@ -192,7 +185,8 @@ static int __init ftm_clockevent_init(unsigned long freq, int irq)
ftm_reset_counter(priv->clkevt_base);
- err = setup_irq(irq, &ftm_timer_irq);
+ err = request_irq(irq, ftm_evt_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "Freescale ftm timer", &ftm_clockevent);
if (err) {
pr_err("ftm: setup irq failed: %d\n", err);
return err;
diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index 706c0d0ff56c..7b2c70f2f353 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -67,7 +67,6 @@ struct imx_timer {
struct clk *clk_ipg;
const struct imx_gpt_data *gpt;
struct clock_event_device ced;
- struct irqaction act;
};
struct imx_gpt_data {
@@ -273,7 +272,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static int __init mxc_clockevent_init(struct imx_timer *imxtm)
{
struct clock_event_device *ced = &imxtm->ced;
- struct irqaction *act = &imxtm->act;
ced->name = "mxc_timer1";
ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
@@ -287,12 +285,8 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
0xff, 0xfffffffe);
- act->name = "i.MX Timer Tick";
- act->flags = IRQF_TIMER | IRQF_IRQPOLL;
- act->handler = mxc_timer_interrupt;
- act->dev_id = ced;
-
- return setup_irq(imxtm->irq, act);
+ return request_irq(imxtm->irq, mxc_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "i.MX Timer Tick", ced);
}
static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index c90a69c7b5fa..b0fcbaac58b0 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -123,13 +123,6 @@ static struct clock_event_device integrator_clockevent = {
.rating = 300,
};
-static struct irqaction integrator_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = integrator_timer_interrupt,
- .dev_id = &integrator_clockevent,
-};
-
static int integrator_clockevent_init(unsigned long inrate,
void __iomem *base, int irq)
{
@@ -149,7 +142,9 @@ static int integrator_clockevent_init(unsigned long inrate,
timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
- ret = setup_irq(irq, &integrator_timer_irq);
+ ret = request_irq(irq, integrator_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "timer",
+ &integrator_clockevent);
if (ret)
return ret;
diff --git a/drivers/clocksource/timer-meson6.c b/drivers/clocksource/timer-meson6.c
index 9e8b467c71da..99f5510a2b56 100644
--- a/drivers/clocksource/timer-meson6.c
+++ b/drivers/clocksource/timer-meson6.c
@@ -150,13 +150,6 @@ static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction meson6_timer_irq = {
- .name = "meson6_timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = meson6_timer_interrupt,
- .dev_id = &meson6_clockevent,
-};
-
static int __init meson6_timer_init(struct device_node *node)
{
u32 val;
@@ -194,7 +187,9 @@ static int __init meson6_timer_init(struct device_node *node)
/* Stop the timer A */
meson6_clkevt_time_stop();
- ret = setup_irq(irq, &meson6_timer_irq);
+ ret = request_irq(irq, meson6_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer",
+ &meson6_clockevent);
if (ret) {
pr_warn("failed to setup irq %d\n", irq);
return ret;
diff --git a/drivers/clocksource/timer-orion.c b/drivers/clocksource/timer-orion.c
index 7d487107e3cd..d01ff4181867 100644
--- a/drivers/clocksource/timer-orion.c
+++ b/drivers/clocksource/timer-orion.c
@@ -114,12 +114,6 @@ static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction orion_clkevt_irq = {
- .name = "orion_event",
- .flags = IRQF_TIMER,
- .handler = orion_clkevt_irq_handler,
-};
-
static int __init orion_timer_init(struct device_node *np)
{
unsigned long rate;
@@ -172,7 +166,8 @@ static int __init orion_timer_init(struct device_node *np)
sched_clock_register(orion_read_sched_clock, 32, rate);
/* setup timer1 as clockevent timer */
- ret = setup_irq(irq, &orion_clkevt_irq);
+ ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
+ "orion_event", NULL);
if (ret) {
pr_err("%pOFn: unable to setup irq\n", np);
return ret;
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index d4a9dcf5fba2..3d202813f992 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -165,14 +165,6 @@ static struct clocksource sirfsoc_clocksource = {
.resume = sirfsoc_clocksource_resume,
};
-static struct irqaction sirfsoc_timer_irq = {
- .name = "sirfsoc_timer0",
- .flags = IRQF_TIMER,
- .irq = 0,
- .handler = sirfsoc_timer_interrupt,
- .dev_id = &sirfsoc_clockevent,
-};
-
/* Overwrite weak default sched_clock with more precise one */
static u64 notrace sirfsoc_read_sched_clock(void)
{
@@ -234,7 +226,8 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
- ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+ ret = request_irq(sirfsoc_timer_irq.irq, sirfsoc_timer_interrupt,
+ IRQF_TIMER, "sirfsoc_timer0", &sirfsoc_clockevent);
if (ret) {
pr_err("Failed to setup irq\n");
return ret;
diff --git a/drivers/clocksource/timer-pxa.c b/drivers/clocksource/timer-pxa.c
index 913a5d354a1f..7ad0e5adb2ff 100644
--- a/drivers/clocksource/timer-pxa.c
+++ b/drivers/clocksource/timer-pxa.c
@@ -143,13 +143,6 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
.resume = pxa_timer_resume,
};
-static struct irqaction pxa_ost0_irq = {
- .name = "ost0",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pxa_ost0_interrupt,
- .dev_id = &ckevt_pxa_osmr0,
-};
-
static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
{
int ret;
@@ -161,7 +154,8 @@ static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
ckevt_pxa_osmr0.cpumask = cpumask_of(0);
- ret = setup_irq(irq, &pxa_ost0_irq);
+ ret = request_irq(irq, pxa_ost0_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "ost0", &ckevt_pxa_osmr0);
if (ret) {
pr_err("Failed to setup irq\n");
return ret;
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 9c841980eed1..ae0b26879ca9 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -168,13 +168,6 @@ static struct clock_event_device sp804_clockevent = {
.rating = 300,
};
-static struct irqaction sp804_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = sp804_timer_interrupt,
- .dev_id = &sp804_clockevent,
-};
-
int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
@@ -200,7 +193,9 @@ int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct
writel(0, base + TIMER_CTRL);
- setup_irq(irq, &sp804_timer_irq);
+ if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "timer", &sp804_clockevent))
+ pr_err("request_irq() on %s failed\n", "timer");
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
return 0;
diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 32adc3057dda..37cba8dfd45f 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -330,12 +330,6 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
-};
-
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
@@ -420,7 +414,8 @@ static int __init u300_timer_init_of(struct device_node *np)
u300_timer_base + U300_TIMER_APP_RGPT1);
/* Set up the IRQ handler */
- ret = setup_irq(irq, &u300_timer_irq);
+ ret = request_irq(irq, u300_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL);
if (ret)
return ret;
diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index fef0bb4e0c8c..7ad4a8b008c2 100644
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -123,19 +123,13 @@ static struct clock_event_device clockevent_pit = {
.rating = 300,
};
-static struct irqaction pit_timer_irq = {
- .name = "VF pit timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pit_timer_interrupt,
- .dev_id = &clockevent_pit,
-};
-
static int __init pit_clockevent_init(unsigned long rate, int irq)
{
__raw_writel(0, clkevt_base + PITTCTRL);
__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
- BUG_ON(setup_irq(irq, &pit_timer_irq));
+ BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "VF pit timer", &clockevent_pit);
clockevent_pit.cpumask = cpumask_of(0);
clockevent_pit.irq = irq;
diff --git a/drivers/clocksource/timer-vt8500.c b/drivers/clocksource/timer-vt8500.c
index bb424bcefbb3..a469b1b5f972 100644
--- a/drivers/clocksource/timer-vt8500.c
+++ b/drivers/clocksource/timer-vt8500.c
@@ -101,13 +101,6 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction irq = {
- .name = "vt8500_timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = vt8500_timer_interrupt,
- .dev_id = &clockevent,
-};
-
static int __init vt8500_timer_init(struct device_node *np)
{
int timer_irq, ret;
@@ -139,7 +132,9 @@ static int __init vt8500_timer_init(struct device_node *np)
clockevent.cpumask = cpumask_of(0);
- ret = setup_irq(timer_irq, &irq);
+ ret = request_irq(timer_irq, vt8500_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "vt8500_timer",
+ &clockevent);
if (ret) {
pr_err("%s: setup_irq failed for %s\n", __func__,
clockevent.name);
diff --git a/drivers/clocksource/timer-zevio.c b/drivers/clocksource/timer-zevio.c
index c0041561f1be..381c3e8fb900 100644
--- a/drivers/clocksource/timer-zevio.c
+++ b/drivers/clocksource/timer-zevio.c
@@ -53,7 +53,6 @@ struct zevio_timer {
struct clk *clk;
struct clock_event_device clkevt;
- struct irqaction clkevt_irq;
char clocksource_name[64];
char clockevent_name[64];
@@ -172,12 +171,12 @@ static int __init zevio_timer_add(struct device_node *node)
/* Interrupt to occur when timer value matches 0 */
writel(0, timer->base + IO_MATCH(TIMER_MATCH));
- timer->clkevt_irq.name = timer->clockevent_name;
- timer->clkevt_irq.handler = zevio_timer_interrupt;
- timer->clkevt_irq.dev_id = timer;
- timer->clkevt_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
-
- setup_irq(irqnr, &timer->clkevt_irq);
+ if (request_irq(irqnr, zevio_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL,
+ timer->clockevent_name, timer)) {
+ pr_err("request_irq() on %s failed\n",
+ timer->clockevent_name);
+ }
clockevents_config_and_register(&timer->clkevt,
clk_get_rate(timer->clk), 0x0001, 0xffff);
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 14f072edbca5..82ebf9223948 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -25,7 +25,6 @@ struct dw_apb_timer {
struct dw_apb_clock_event_device {
struct clock_event_device ced;
struct dw_apb_timer timer;
- struct irqaction irqaction;
void (*eoi)(struct dw_apb_timer *);
};
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 02/18] ARM: replace setup_irq() by request_irq()
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
@ 2020-02-12 8:10 ` Viresh Kumar
2020-02-12 23:27 ` Alexander Sverdlin
1 sibling, 0 replies; 15+ messages in thread
From: Viresh Kumar @ 2020-02-12 8:10 UTC (permalink / raw)
To: afzal mohammed
Cc: Andrew Lunn, Tony Lindgren, Kevin Hilman, Viresh Kumar,
Gregory Clement, Russell King, linux-arm-kernel,
Sebastian Hesselbarth, Jason Cooper, Arnd Bergmann,
Lubomir Rintel, Krzysztof Halasa, Thomas Gleixner, linux-omap,
Alexander Sverdlin, Shiraz Hashim, Allison Randal,
Greg Kroah-Hartman, Aaro Koskinen, linux-kernel, Hartley Sweeten,
Enrico Weigelt
On 12-02-20, 13:32, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
> ---
> arch/arm/mach-spear/time.c | 9 ++-------
>
> diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
> index 289e036c9c30..92b2850eeb4f 100644
> --- a/arch/arm/mach-spear/time.c
> +++ b/arch/arm/mach-spear/time.c
> @@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static struct irqaction spear_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = spear_timer_interrupt
> -};
> -
> static void __init spear_clockevent_init(int irq)
> {
> u32 tick_rate;
> @@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
>
> clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
>
> - setup_irq(irq, &spear_timer_irq);
> + if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
> + pr_err("request_irq() on %s failed\n", "timer");
> }
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 02/18] ARM: replace setup_irq() by request_irq()
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
2020-02-12 8:10 ` Viresh Kumar
@ 2020-02-12 23:27 ` Alexander Sverdlin
1 sibling, 0 replies; 15+ messages in thread
From: Alexander Sverdlin @ 2020-02-12 23:27 UTC (permalink / raw)
To: afzal mohammed
Cc: Andrew Lunn, Enrico Weigelt, Jason Cooper, Arnd Bergmann,
Lubomir Rintel, Tony Lindgren, Viresh Kumar, Gregory Clement,
Kevin Hilman, linux-kernel, Russell King, Hartley Sweeten,
Krzysztof Halasa, Allison Randal, Greg Kroah-Hartman,
Aaro Koskinen, Thomas Gleixner, linux-omap, Shiraz Hashim,
linux-arm-kernel, Sebastian Hesselbarth
Hi!
On Wed, 12 Feb 2020 13:32:43 +0530
afzal mohammed <afzal.mohd.ma@gmail.com> wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
For the EP93xx part:
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
> index de998830f534..0335f3b93340 100644
> --- a/arch/arm/mach-ep93xx/timer-ep93xx.c
> +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
> @@ -117,13 +117,6 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static struct irqaction ep93xx_timer_irq = {
> - .name = "ep93xx timer",
> - .flags = IRQF_TIMER | IRQF_IRQPOLL,
> - .handler = ep93xx_timer_interrupt,
> - .dev_id = &ep93xx_clockevent,
> -};
> -
> void __init ep93xx_timer_init(void)
> {
> /* Enable and register clocksource and sched_clock on timer 4 */
> @@ -136,7 +129,10 @@ void __init ep93xx_timer_init(void)
> EP93XX_TIMER4_RATE);
>
> /* Set up clockevent on timer 3 */
> - setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
> + if (request_irq(IRQ_EP93XX_TIMER3, ep93xx_timer_interrupt,
> + IRQF_TIMER | IRQF_IRQPOLL, "ep93xx timer",
> + &ep93xx_clockevent))
> + pr_err("request_irq() on %s failed\n", "ep93xx timer");
> clockevents_config_and_register(&ep93xx_clockevent,
> EP93XX_TIMER123_RATE,
> 1,
--
Alexander Sverdlin.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 16/18] clocksource: Replace setup_irq() by request_irq()
2020-02-12 8:05 ` [PATCH 16/18] clocksource: " afzal mohammed
@ 2020-02-20 11:13 ` Daniel Lezcano
2020-02-20 14:48 ` Linus Walleij
1 sibling, 0 replies; 15+ messages in thread
From: Daniel Lezcano @ 2020-02-20 11:13 UTC (permalink / raw)
To: afzal mohammed, linux-kernel, linux-rpi-kernel, linux-arm-kernel,
linux-samsung-soc, linux-amlogic
Cc: Kate Stewart, Linus Walleij, Shawn Guo, Fabio Estevam,
Florian Fainelli, Kevin Hilman, Krzysztof Kozlowski, Kukjin Kim,
bcm-kernel-feedback-list, NXP Linux Team, Uwe Kleine-König,
Ray Jui, Sascha Hauer, Thomas Gleixner, Allison Randal,
Barry Song, Scott Branden, Greg Kroah-Hartman, Tony Prisk,
Pengutronix Kernel Team, Enrico Weigelt, Nicolas Saenz Julienne
On 12/02/2020 09:05, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Nice, thanks for this cleanup
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ ... ]
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 16/18] clocksource: Replace setup_irq() by request_irq()
2020-02-12 8:05 ` [PATCH 16/18] clocksource: " afzal mohammed
2020-02-20 11:13 ` Daniel Lezcano
@ 2020-02-20 14:48 ` Linus Walleij
1 sibling, 0 replies; 15+ messages in thread
From: Linus Walleij @ 2020-02-20 14:48 UTC (permalink / raw)
To: afzal mohammed
Cc: Kate Stewart, Fabio Estevam, linux-samsung-soc, Kevin Hilman,
Daniel Lezcano, Allison Randal, Krzysztof Kozlowski, Kukjin Kim,
bcm-kernel-feedback-list, NXP Linux Team, Uwe Kleine-König,
Ray Jui, Sascha Hauer, Florian Fainelli, linux-rpi-kernel,
open list:ARM/Amlogic Meson...,
Thomas Gleixner, Linux ARM, Barry Song, Scott Branden,
Enrico Weigelt, linux-kernel, Tony Prisk,
Pengutronix Kernel Team, Greg Kroah-Hartman, Shawn Guo,
Nicolas Saenz Julienne
On Wed, Feb 12, 2020 at 9:05 AM afzal mohammed <afzal.mohd.ma@gmail.com> wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
This makes the kernel a better place.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 00/18] genirq: Remove setup_irq()
2020-02-12 8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
` (2 preceding siblings ...)
2020-02-12 8:05 ` [PATCH 16/18] clocksource: " afzal mohammed
@ 2020-02-27 10:31 ` Thomas Gleixner
2020-02-27 11:07 ` afzal mohammed
3 siblings, 1 reply; 15+ messages in thread
From: Thomas Gleixner @ 2020-02-27 10:31 UTC (permalink / raw)
To: afzal mohammed, linux-kernel, linux-rpi-kernel, linux-arm-kernel,
linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
linux-c6x-dev, linux-omap, linux-alpha
Cc: Julia Lawall, Michal Marek, Nicolas Palix, Gilles Muller
Afzal,
afzal mohammed <afzal.mohd.ma@gmail.com> writes:
> While trying to understand internals of irq handling, came across a
> thread [1] in which tglx was referring to avoid usage of setup_irq().
> Existing callers of setup_irq() reached mostly via 'init_IRQ()' &
> 'time_init()', while memory allocators are ready by 'mm_init()'.
>
> Hence instances of setup_irq() is replaced by request_irq() &
> setup_irq() (along with remove_irq()) definition deleted in the last
> patch.
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
thanks a lot for tackling this!
Vs. merging this series, I suggest the following approach:
- Resubmit the individual changes as single patches or small series
to the relevant maintainers and subsystem mailing lists. They have
no dependency on a core change and can be applied where they belong
to.
- After 5.6-rc6, verify which parts have made their way into
linux-next and resubmit the ignored ones as a series to me along
with the removal of the core parts.
That way we can avoid conflicting changes between subsystems and the tip
irq/core branch as much as possible.
Thanks,
tglx
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 00/18] genirq: Remove setup_irq()
2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
@ 2020-02-27 11:07 ` afzal mohammed
2020-03-21 17:43 ` afzal mohammed
0 siblings, 1 reply; 15+ messages in thread
From: afzal mohammed @ 2020-02-27 11:07 UTC (permalink / raw)
To: Thomas Gleixner
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, Nicolas Palix,
linux-kernel, linux-mips, Julia Lawall, linux-m68k, Michal Marek,
linux-rpi-kernel, linux-alpha, Gilles Muller, linux-omap,
linuxppc-dev, linux-arm-kernel
Hi Thomas,
On Thu, Feb 27, 2020 at 11:31:15AM +0100, Thomas Gleixner wrote:
> Vs. merging this series, I suggest the following approach:
>
> - Resubmit the individual changes as single patches or small series
> to the relevant maintainers and subsystem mailing lists. They have
> no dependency on a core change and can be applied where they belong
> to.
>
> - After 5.6-rc6, verify which parts have made their way into
> linux-next and resubmit the ignored ones as a series to me along
> with the removal of the core parts.
>
> That way we can avoid conflicting changes between subsystems and the tip
> irq/core branch as much as possible.
Okay, i will do accordingly.
[ your mail crossed my v3 (only one patch) posting ]
Regards
afzal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 00/18] genirq: Remove setup_irq()
2020-02-27 11:07 ` afzal mohammed
@ 2020-03-21 17:43 ` afzal mohammed
2020-03-27 16:08 ` [PATCH 0/6] Kill setup_irq() afzal mohammed
0 siblings, 1 reply; 15+ messages in thread
From: afzal mohammed @ 2020-03-21 17:43 UTC (permalink / raw)
To: Thomas Gleixner
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, Nicolas Palix,
linux-kernel, linux-mips, Julia Lawall, linux-m68k, Michal Marek,
linux-rpi-kernel, linux-alpha, Gilles Muller, linux-omap,
linuxppc-dev, linux-arm-kernel
Hi Thomas,
On Thu, Feb 27, 2020 at 04:37:13PM +0530, afzal mohammed wrote:
> On Thu, Feb 27, 2020 at 11:31:15AM +0100, Thomas Gleixner wrote:
> > Vs. merging this series, I suggest the following approach:
> >
> > - Resubmit the individual changes as single patches or small series
> > to the relevant maintainers and subsystem mailing lists. They have
> > no dependency on a core change and can be applied where they belong
> > to.
> >
> > - After 5.6-rc6, verify which parts have made their way into
> > linux-next and resubmit the ignored ones as a series to me along
> > with the removal of the core parts.
> >
> > That way we can avoid conflicting changes between subsystems and the tip
> > irq/core branch as much as possible.
>
> Okay, i will do accordingly.
i am on it, is delayed due to the reason as mentioned at,
https://lkml.kernel.org/r/20200321172626.GA6323@afzalpc
[ not repeating contents here since other mail was sent just now,
cc'ing you ]
Regards
afzal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 0/6] Kill setup_irq()
2020-03-21 17:43 ` afzal mohammed
@ 2020-03-27 16:08 ` afzal mohammed
2020-03-28 2:48 ` Brian Cain
0 siblings, 1 reply; 15+ messages in thread
From: afzal mohammed @ 2020-03-27 16:08 UTC (permalink / raw)
To: Thomas Gleixner
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, linux-kernel,
linux-mips, linux-m68k, linux-alpha, linux-omap, linuxppc-dev,
linux-arm-kernel
Hi Thomas,
As compared to the situation mentioned earlier[1], now powerpc patch is
also in -next, and the pending ARM patches has been picked up by ARM SoC
maintainers today and is expected to show up in next -next. All other
subsytem patches has been picked by relevant maintainers & are already
in -next except alpha, c6x, hexagon, unicore32 & sh.
As it is the case, i am sending you patches for the above 5
architecture's plus the core removal patch.
Status of 5 arch's:
-------------------
alpha: received ack from Matt Turner, build test success
c6x: did receive ack from Mark Salter in v1, the final
version (v3) was with minor changes, hence removed his
ack & cc'ed him, build test success
hexagon: build test success
unicore32: couldn't get toolchain from kernel.org, 0day test robot
or Segher's buildall
sh: To compile the relevant changes sh64 compiler is
required, couldn't get it from above mentioned 3
sources.
Note 1: sh toolchain is available, but that will not make the
relevant changes compile as it has dependency of 64bit arch toolchain,
did try a Kconfig hack to make it compile w/ 32bit sh toolchain, but it
failed due to other reasons (unknown operands), so gave up on that.
Note 2: hexagon final image creation fails even w/o my patch, but it
has been ensured that w/ my changes relevant object files are getting
built w/o warnings.
Regards
afzal
[1] https://lkml.kernel.org/r/20200321172626.GA6323@afzalpc
afzal mohammed (6):
alpha: Replace setup_irq() by request_irq()
c6x: replace setup_irq() by request_irq()
hexagon: replace setup_irq() by request_irq()
sh: replace setup_irq() by request_irq()
unicore32: replace setup_irq() by request_irq()
genirq: Remove setup_irq() and remove_irq()
arch/alpha/kernel/irq_alpha.c | 29 ++++----------------
arch/alpha/kernel/irq_i8259.c | 8 ++----
arch/alpha/kernel/irq_impl.h | 7 +----
arch/alpha/kernel/irq_pyxis.c | 3 ++-
arch/alpha/kernel/sys_alcor.c | 3 ++-
arch/alpha/kernel/sys_cabriolet.c | 3 ++-
arch/alpha/kernel/sys_eb64p.c | 3 ++-
arch/alpha/kernel/sys_marvel.c | 2 +-
arch/alpha/kernel/sys_miata.c | 6 +++--
arch/alpha/kernel/sys_ruffian.c | 3 ++-
arch/alpha/kernel/sys_rx164.c | 3 ++-
arch/alpha/kernel/sys_sx164.c | 3 ++-
arch/alpha/kernel/sys_wildfire.c | 7 ++---
arch/alpha/kernel/time.c | 6 ++---
arch/c6x/platforms/timer64.c | 11 +++-----
arch/hexagon/kernel/smp.c | 22 ++++++++--------
arch/hexagon/kernel/time.c | 11 +++-----
arch/sh/boards/mach-cayman/irq.c | 18 +++++--------
arch/sh/drivers/dma/dma-pvr2.c | 9 +++----
arch/unicore32/kernel/time.c | 11 +++-----
include/linux/irq.h | 2 --
kernel/irq/manage.c | 44 -------------------------------
22 files changed, 60 insertions(+), 154 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH 0/6] Kill setup_irq()
2020-03-27 16:08 ` [PATCH 0/6] Kill setup_irq() afzal mohammed
@ 2020-03-28 2:48 ` Brian Cain
2020-03-28 7:32 ` afzal mohammed
0 siblings, 1 reply; 15+ messages in thread
From: Brian Cain @ 2020-03-28 2:48 UTC (permalink / raw)
To: 'afzal mohammed', 'Thomas Gleixner'
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, linux-kernel,
linux-mips, linux-m68k, linux-alpha, linux-omap, linuxppc-dev,
linux-arm-kernel
> -----Original Message-----
> From: linux-hexagon-owner@vger.kernel.org <linux-hexagon-
> owner@vger.kernel.org> On Behalf Of afzal mohammed
> Sent: Friday, March 27, 2020 11:08 AM
> To: Thomas Gleixner <tglx@linutronix.de>
> Cc: linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-samsung-soc@vger.kernel.org; x86@kernel.org; linux-
> sh@vger.kernel.org; linux-s390@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; linux-parisc@vger.kernel.org; linux-
> mips@vger.kernel.org; linux-m68k@lists.linux-m68k.org; linux-
> ia64@vger.kernel.org; linux-hexagon@vger.kernel.org; linux-c6x-dev@linux-
> c6x.org; linux-omap@vger.kernel.org; linux-alpha@vger.kernel.org
> Subject: [PATCH 0/6] Kill setup_irq()
...
> Note 1: sh toolchain is available, but that will not make the relevant
changes
> compile as it has dependency of 64bit arch toolchain, did try a Kconfig
hack
> to make it compile w/ 32bit sh toolchain, but it failed due to other
reasons
> (unknown operands), so gave up on that.
> Note 2: hexagon final image creation fails even w/o my patch, but it has
> been ensured that w/ my changes relevant object files are getting built
w/o
> warnings.
Afzal,
What's the nature of the failure in "Note 2"?
-Brian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 0/6] Kill setup_irq()
2020-03-28 2:48 ` Brian Cain
@ 2020-03-28 7:32 ` afzal mohammed
2020-04-02 15:03 ` Brian Cain
0 siblings, 1 reply; 15+ messages in thread
From: afzal mohammed @ 2020-03-28 7:32 UTC (permalink / raw)
To: Brian Cain
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, linux-kernel,
linux-mips, linux-m68k, linux-alpha, 'Thomas Gleixner',
linux-omap, linuxppc-dev, linux-arm-kernel
Hi Brian,
On Fri, Mar 27, 2020 at 09:48:38PM -0500, Brian Cain wrote:
> > Note 2: hexagon final image creation fails even w/o my patch
> What's the nature of the failure in "Note 2"?
drivers/base/firmware_loader/main.o: In function `fw_is_builtin_firmware':
/devel/src/kernel6/drivers/base/firmware_loader/main.c:132:(.text+0xc8): relocation truncated to fit: R_HEX_16_X against symbol `__start_builtin_fw' defined in .modinfo section in .tmp_vmlinux1
Makefile:1077: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
[ i had deleted the toolchain earlier, since you asked, download again &
checked ]
Regards
afzal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH 0/6] Kill setup_irq()
2020-03-28 7:32 ` afzal mohammed
@ 2020-04-02 15:03 ` Brian Cain
0 siblings, 0 replies; 15+ messages in thread
From: Brian Cain @ 2020-04-02 15:03 UTC (permalink / raw)
To: 'afzal mohammed'
Cc: linux-s390, linux-samsung-soc, linux-ia64, linux-c6x-dev,
linux-parisc, linux-sh, linux-hexagon, x86, linux-kernel,
linux-mips, linux-m68k, linux-alpha, 'Thomas Gleixner',
linux-omap, linuxppc-dev, linux-arm-kernel
> -----Original Message-----
> From: linux-hexagon-owner@vger.kernel.org <linux-hexagon-
> owner@vger.kernel.org> On Behalf Of afzal mohammed
...
> On Fri, Mar 27, 2020 at 09:48:38PM -0500, Brian Cain wrote:
>
> > > Note 2: hexagon final image creation fails even w/o my patch
>
> > What's the nature of the failure in "Note 2"?
>
> drivers/base/firmware_loader/main.o: In function `fw_is_builtin_firmware':
> /devel/src/kernel6/drivers/base/firmware_loader/main.c:132:(.text+0xc8):
> relocation truncated to fit: R_HEX_16_X against symbol
`__start_builtin_fw'
> defined in .modinfo section in .tmp_vmlinux1
> Makefile:1077: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
Thanks for reporting it -- I will make a patch to fix it.
-Brian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2020-04-02 15:03 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12 8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-12 8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
2020-02-12 8:10 ` Viresh Kumar
2020-02-12 23:27 ` Alexander Sverdlin
2020-02-12 8:04 ` [PATCH 08/18] MIPS: Replace " afzal mohammed
2020-02-12 8:05 ` [PATCH 16/18] clocksource: " afzal mohammed
2020-02-20 11:13 ` Daniel Lezcano
2020-02-20 14:48 ` Linus Walleij
2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
2020-02-27 11:07 ` afzal mohammed
2020-03-21 17:43 ` afzal mohammed
2020-03-27 16:08 ` [PATCH 0/6] Kill setup_irq() afzal mohammed
2020-03-28 2:48 ` Brian Cain
2020-03-28 7:32 ` afzal mohammed
2020-04-02 15:03 ` Brian Cain
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).