linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Eric Auger <eric.auger@redhat.com>,
	Robert Richter <rrichter@marvell.com>,
	James Morse <james.morse@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Julien Thierry <julien.thierry.kdev@gmail.com>
Subject: [PATCH v4 06/20] irqchip/gic-v4.1: Add initial SGI configuration
Date: Fri, 14 Feb 2020 14:57:22 +0000	[thread overview]
Message-ID: <20200214145736.18550-7-maz@kernel.org> (raw)
In-Reply-To: <20200214145736.18550-1-maz@kernel.org>

The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c   | 76 +++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-v3.h |  3 +-
 2 files changed, 77 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 6121c8f2a8ce..229e4ae9c59b 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -354,6 +354,15 @@ struct its_cmd_desc {
 		struct {
 			struct its_vpe *vpe;
 		} its_invdb_cmd;
+
+		struct {
+			struct its_vpe *vpe;
+			u8 sgi;
+			u8 priority;
+			bool enable;
+			bool group;
+			bool clear;
+		} its_vsgi_cmd;
 	};
 };
 
@@ -502,6 +511,31 @@ static void its_encode_db(struct its_cmd_block *cmd, bool db)
 	its_mask_encode(&cmd->raw_cmd[2], db, 63, 63);
 }
 
+static void its_encode_sgi_intid(struct its_cmd_block *cmd, u8 sgi)
+{
+	its_mask_encode(&cmd->raw_cmd[0], sgi, 35, 32);
+}
+
+static void its_encode_sgi_priority(struct its_cmd_block *cmd, u8 prio)
+{
+	its_mask_encode(&cmd->raw_cmd[0], prio >> 4, 23, 20);
+}
+
+static void its_encode_sgi_group(struct its_cmd_block *cmd, bool grp)
+{
+	its_mask_encode(&cmd->raw_cmd[0], grp, 10, 10);
+}
+
+static void its_encode_sgi_clear(struct its_cmd_block *cmd, bool clr)
+{
+	its_mask_encode(&cmd->raw_cmd[0], clr, 9, 9);
+}
+
+static void its_encode_sgi_enable(struct its_cmd_block *cmd, bool en)
+{
+	its_mask_encode(&cmd->raw_cmd[0], en, 8, 8);
+}
+
 static inline void its_fixup_cmd(struct its_cmd_block *cmd)
 {
 	/* Let's fixup BE commands */
@@ -867,6 +901,26 @@ static struct its_vpe *its_build_invdb_cmd(struct its_node *its,
 	return valid_vpe(its, desc->its_invdb_cmd.vpe);
 }
 
+static struct its_vpe *its_build_vsgi_cmd(struct its_node *its,
+					  struct its_cmd_block *cmd,
+					  struct its_cmd_desc *desc)
+{
+	if (WARN_ON(!is_v4_1(its)))
+		return NULL;
+
+	its_encode_cmd(cmd, GITS_CMD_VSGI);
+	its_encode_vpeid(cmd, desc->its_vsgi_cmd.vpe->vpe_id);
+	its_encode_sgi_intid(cmd, desc->its_vsgi_cmd.sgi);
+	its_encode_sgi_priority(cmd, desc->its_vsgi_cmd.priority);
+	its_encode_sgi_group(cmd, desc->its_vsgi_cmd.group);
+	its_encode_sgi_clear(cmd, desc->its_vsgi_cmd.clear);
+	its_encode_sgi_enable(cmd, desc->its_vsgi_cmd.enable);
+
+	its_fixup_cmd(cmd);
+
+	return valid_vpe(its, desc->its_vsgi_cmd.vpe);
+}
+
 static u64 its_cmd_ptr_to_offset(struct its_node *its,
 				 struct its_cmd_block *ptr)
 {
@@ -3823,6 +3877,21 @@ static struct irq_chip its_vpe_4_1_irq_chip = {
 	.irq_set_vcpu_affinity	= its_vpe_4_1_set_vcpu_affinity,
 };
 
+static void its_configure_sgi(struct irq_data *d, bool clear)
+{
+	struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+	struct its_cmd_desc desc;
+
+	desc.its_vsgi_cmd.vpe = vpe;
+	desc.its_vsgi_cmd.sgi = d->hwirq;
+	desc.its_vsgi_cmd.priority = vpe->sgi_config[d->hwirq].priority;
+	desc.its_vsgi_cmd.enable = vpe->sgi_config[d->hwirq].enabled;
+	desc.its_vsgi_cmd.group = vpe->sgi_config[d->hwirq].group;
+	desc.its_vsgi_cmd.clear = clear;
+
+	its_send_single_vcommand(find_4_1_its(), its_build_vsgi_cmd, &desc);
+}
+
 static int its_sgi_set_affinity(struct irq_data *d,
 				const struct cpumask *mask_val,
 				bool force)
@@ -3868,13 +3937,18 @@ static void its_sgi_irq_domain_free(struct irq_domain *domain,
 static int its_sgi_irq_domain_activate(struct irq_domain *domain,
 				       struct irq_data *d, bool reserve)
 {
+	/* Write out the initial SGI configuration */
+	its_configure_sgi(d, false);
 	return 0;
 }
 
 static void its_sgi_irq_domain_deactivate(struct irq_domain *domain,
 					  struct irq_data *d)
 {
-	/* Nothing to do */
+	struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+
+	vpe->sgi_config[d->hwirq].enabled = false;
+	its_configure_sgi(d, true);
 }
 
 static struct irq_domain_ops its_sgi_domain_ops = {
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index c29a02678a6f..a89578884263 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -502,8 +502,9 @@
 #define GITS_CMD_VMAPTI			GITS_CMD_GICv4(GITS_CMD_MAPTI)
 #define GITS_CMD_VMOVI			GITS_CMD_GICv4(GITS_CMD_MOVI)
 #define GITS_CMD_VSYNC			GITS_CMD_GICv4(GITS_CMD_SYNC)
-/* VMOVP and INVDB are the odd ones, as they dont have a physical counterpart */
+/* VMOVP, VSGI and INVDB are the odd ones, as they dont have a physical counterpart */
 #define GITS_CMD_VMOVP			GITS_CMD_GICv4(2)
+#define GITS_CMD_VSGI			GITS_CMD_GICv4(3)
 #define GITS_CMD_INVDB			GITS_CMD_GICv4(0xe)
 
 /*
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-02-14 14:59 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 14:57 [PATCH v4 00/20] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 01/20] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-02-17  9:11   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 02/20] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-02-17  9:18   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 03/20] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-02-17  9:09   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 04/20] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-02-20  3:17   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 05/20] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2020-02-20  3:21   ` Zenghui Yu
2020-02-14 14:57 ` Marc Zyngier [this message]
2020-02-18  7:25   ` [PATCH v4 06/20] irqchip/gic-v4.1: Add initial SGI configuration Zenghui Yu
2020-02-18  9:46     ` Marc Zyngier
2020-02-20  3:25       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 07/20] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-02-20  3:32   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 08/20] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-02-18  7:00   ` Zenghui Yu
2020-02-18  9:27     ` Marc Zyngier
2020-02-18 15:31       ` Marc Zyngier
2020-02-19 11:50         ` Zenghui Yu
2020-02-19 15:18           ` Zenghui Yu
2020-02-20  3:11         ` Zenghui Yu
2020-02-28 19:37           ` Marc Zyngier
2020-03-01 19:00             ` Marc Zyngier
2020-03-02  8:18               ` Zenghui Yu
2020-03-02 12:09                 ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 09/20] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-02-20  3:37   ` Zenghui Yu
2020-02-28 19:00     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 10/20] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 11/20] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 12/20] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 13/20] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 14/20] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 15/20] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-02-18  8:46   ` Zenghui Yu
2020-02-18  9:41     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 16/20] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-02-20  3:55   ` Zenghui Yu
2020-02-28 19:16     ` Marc Zyngier
2020-03-02  2:40       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 17/20] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 18/20] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 19/20] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 20/20] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214145736.18550-7-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=eric.auger@redhat.com \
    --cc=james.morse@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tglx@linutronix.de \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).