* [PATCH v1 1/3] arm64: dts: mt8183: Add gce setting in display node
@ 2020-02-17 9:10 Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 2/3] drm/mediatek: make sure previous message done or be aborted before send Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 3/3] drm/mediatek: move gce event property to mutex device node Bibby Hsieh
0 siblings, 2 replies; 3+ messages in thread
From: Bibby Hsieh @ 2020-02-17 9:10 UTC (permalink / raw)
To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
Cc: drinkcat, Bibby Hsieh, srv_heupstream, Yongqiang Niu,
linux-kernel, tfiga, CK Hu, Thierry Reding, Philipp Zabel,
YT Shen, linux-arm-kernel
In order to use GCE function, we need add some information
into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
---
This patch depends on ptach:
[RESEND,v6,02/17] arm64: dts: add display nodes for mt8183
https://patchwork.kernel.org/patch/11316277/
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index be4428c92f35..8b522b039a37 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/mt8183-power.h>
+#include <dt-bindings/gce/mt8183-gce.h>
#include "mt8183-pinfunc.h"
/ {
@@ -664,6 +665,9 @@
reg = <0 0x14000000 0 0x1000>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
#clock-cells = <1>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+ <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
};
ovl0: ovl@14008000 {
@@ -672,6 +676,7 @@
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
};
ovl_2l0: ovl@14009000 {
@@ -680,6 +685,7 @@
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
};
ovl_2l1: ovl@1400a000 {
@@ -688,6 +694,7 @@
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
};
rdma0: rdma@1400b000 {
@@ -697,6 +704,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};
rdma1: rdma@1400c000 {
@@ -706,6 +714,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
color0: color@1400e000 {
@@ -715,6 +724,7 @@
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
};
ccorr0: ccorr@1400f000 {
@@ -723,6 +733,7 @@
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};
aal0: aal@14010000 {
@@ -732,6 +743,7 @@
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};
gamma0: gamma@14011000 {
@@ -741,6 +753,7 @@
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};
dither0: dither@14012000 {
@@ -749,6 +762,7 @@
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};
mutex: mutex@14016000 {
@@ -756,6 +770,8 @@
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+ <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
};
smi_common: smi@14019000 {
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v1 2/3] drm/mediatek: make sure previous message done or be aborted before send
2020-02-17 9:10 [PATCH v1 1/3] arm64: dts: mt8183: Add gce setting in display node Bibby Hsieh
@ 2020-02-17 9:10 ` Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 3/3] drm/mediatek: move gce event property to mutex device node Bibby Hsieh
1 sibling, 0 replies; 3+ messages in thread
From: Bibby Hsieh @ 2020-02-17 9:10 UTC (permalink / raw)
To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
Cc: drinkcat, Bibby Hsieh, srv_heupstream, linux-kernel, tfiga,
CK Hu, Thierry Reding, Philipp Zabel, YT Shen, linux-arm-kernel
Mediatek CMDQ driver removed atomic parameter and implementation
related to atomic. DRM driver need to make sure previous message
done or be aborted before we send next message.
If previous message is still waiting for event, it means the
setting hasn't been updated into display hardware register,
we can abort the message and send next message to update the
newest setting into display hardware.
If previous message already started, we have to wait it until
transmission has been completed.
So we flush mbox client before we send new message to controller
driver.
This patch depends on ptach:
[0/3] Remove atomic_exec
https://patchwork.kernel.org/cover/11381677/
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 3c53ea22208c..e35b66c5ba0f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -491,6 +491,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
}
#if IS_ENABLED(CONFIG_MTK_CMDQ)
if (mtk_crtc->cmdq_client) {
+ mbox_flush(mtk_crtc->cmdq_client->chan, 2000);
cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v1 3/3] drm/mediatek: move gce event property to mutex device node
2020-02-17 9:10 [PATCH v1 1/3] arm64: dts: mt8183: Add gce setting in display node Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 2/3] drm/mediatek: make sure previous message done or be aborted before send Bibby Hsieh
@ 2020-02-17 9:10 ` Bibby Hsieh
1 sibling, 0 replies; 3+ messages in thread
From: Bibby Hsieh @ 2020-02-17 9:10 UTC (permalink / raw)
To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
Cc: drinkcat, Bibby Hsieh, srv_heupstream, linux-kernel, tfiga,
CK Hu, Thierry Reding, Philipp Zabel, YT Shen, linux-arm-kernel
According mtk hardware design, stream_done0 and stream_done1 are
generated by mutex, so we move gce event property to mutex device mode.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index e35b66c5ba0f..e1cc7703a312 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -820,7 +820,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
drm_crtc_index(&mtk_crtc->base));
mtk_crtc->cmdq_client = NULL;
}
- ret = of_property_read_u32_index(dev->of_node, "mediatek,gce-events",
+ ret = of_property_read_u32_index(priv->mutex_node, "mediatek,gce-events",
drm_crtc_index(&mtk_crtc->base),
&mtk_crtc->cmdq_event);
if (ret)
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-02-17 9:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-17 9:10 [PATCH v1 1/3] arm64: dts: mt8183: Add gce setting in display node Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 2/3] drm/mediatek: make sure previous message done or be aborted before send Bibby Hsieh
2020-02-17 9:10 ` [PATCH v1 3/3] drm/mediatek: move gce event property to mutex device node Bibby Hsieh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).