[PATCH v2 00/10] Allow COMMON_CLK to be selectable

[PATCH v2 00/10] Allow COMMON_CLK to be selectable

[Stephen Boyd]

This patch series cleans up a handful of selects that were redundant and
deletes presumably dead code with the goal of making it possible to add
kunit tests for the CCF in the future. To do that, we introduce a
"legacy" clk Kconfig option to mark code that hasn't migrated to the
common clk framework and then make the COMMON_CLK config option visible
in the menuconfig as long as that legacy option isn't enabled. I've also
included a couple patches at the end that may be more controversial but
helped me consolidate all this logic/code.

I haven't done more than compile test a few configs for arm, arm64,
h8300, and mips. More testing is welcome.

The plan is that I'll just merge the whole pile through the clk tree. If
the first five patches or the last three patches are better going
through another tree like arm-soc or architecture trees that's fine too,
but there are potential conflicts between trees so maybe it's better to
just leave it all in one tree.

Changes from v1:
 * Fixed MIPS ralink build problem pointed out by Arnd
 * Fixed meson mx sdio build due to bad Kconfig exposed by this change
 * Picked up acks

Stephen Boyd (10):
  ARM: Remove redundant COMMON_CLK selects
  ARM: Remove redundant CLKDEV_LOOKUP selects
  arm64: tegra: Remove redundant CLKDEV_LOOKUP selects
  h8300: Remove redundant CLKDEV_LOOKUP selects
  MIPS: Remove redundant CLKDEV_LOOKUP selects
  mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF
  clk: Allow the common clk framework to be selectable
  ARM: mmp: Remove legacy clk code
  MIPS: Loongson64: Drop asm/clock.h include
  clk: Move HAVE_CLK config out of architecture layer

Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <chenhc@lemote.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-c6x-dev@linux-c6x.org>
Cc: <linux-m68k@lists.linux-m68k.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-sh@vger.kernel.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>

 arch/Kconfig                     |   6 --
 arch/arm/Kconfig                 |   5 +-
 arch/arm/mach-actions/Kconfig    |   1 -
 arch/arm/mach-clps711x/Kconfig   |   1 -
 arch/arm/mach-mmp/Kconfig        |   1 -
 arch/arm/mach-mmp/Makefile       |   6 --
 arch/arm/mach-mmp/clock-mmp2.c   | 114 -------------------------------
 arch/arm/mach-mmp/clock-pxa168.c |  94 -------------------------
 arch/arm/mach-mmp/clock-pxa910.c |  70 -------------------
 arch/arm/mach-mmp/clock.c        | 105 ----------------------------
 arch/arm/mach-mmp/clock.h        |  65 ------------------
 arch/arm/mach-vt8500/Kconfig     |   1 -
 arch/arm64/Kconfig.platforms     |   1 -
 arch/c6x/Kconfig                 |   1 +
 arch/h8300/Kconfig               |   1 -
 arch/m68k/Kconfig.cpu            |   2 +-
 arch/mips/Kconfig                |   7 +-
 arch/mips/loongson2ef/Kconfig    |   2 +-
 arch/mips/loongson64/smp.c       |   1 -
 arch/mips/ralink/Kconfig         |   4 ++
 arch/sh/boards/Kconfig           |   5 ++
 arch/unicore32/Kconfig           |   2 +-
 drivers/clk/Kconfig              |  23 +++++--
 drivers/mmc/host/Kconfig         |   2 +-
 24 files changed, 38 insertions(+), 482 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/clock-mmp2.c
 delete mode 100644 arch/arm/mach-mmp/clock-pxa168.c
 delete mode 100644 arch/arm/mach-mmp/clock-pxa910.c
 delete mode 100644 arch/arm/mach-mmp/clock.c
 delete mode 100644 arch/arm/mach-mmp/clock.h


base-commit: 7111951b8d4973bda27ff663f2cf18b663d15b48
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/10] ARM: Remove redundant COMMON_CLK selects

[Stephen Boyd]

The mulitplatform config already selects COMMON_CLK, so selecting it
again is not useful. Remove these selects from ARM platforms that are
part of the multiplatform build.

Reviewed-by: "Andreas Färber" <afaerber@suse.de> # actions
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> # actions
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm/mach-actions/Kconfig  | 1 -
 arch/arm/mach-clps711x/Kconfig | 1 -
 arch/arm/mach-mmp/Kconfig      | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm/mach-actions/Kconfig b/arch/arm/mach-actions/Kconfig
index b5e0ac965ec0..00fb4babccdd 100644
--- a/arch/arm/mach-actions/Kconfig
+++ b/arch/arm/mach-actions/Kconfig
@@ -7,7 +7,6 @@ menuconfig ARCH_ACTIONS
 	select ARM_GLOBAL_TIMER
 	select CACHE_L2X0
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index fc9188b54dd6..ba497a2032e9 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -5,7 +5,6 @@ menuconfig ARCH_CLPS711X
 	select AUTO_ZRELADDR
 	select TIMER_OF
 	select CLPS711X_TIMER
-	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index b58a03b18bde..6fe1550f43ec 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -110,7 +110,6 @@ config MACH_MMP_DT
 	depends on ARCH_MULTI_V5
 	select PINCTRL
 	select PINCTRL_SINGLE
-	select COMMON_CLK
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_MOHAWK
 	help
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/10] ARM: Remove redundant CLKDEV_LOOKUP selects

[Stephen Boyd]

These platforms select COMMON_CLK indirectly through use of the
ARCH_MULTIPLATFORM config option that they depend on implicitly via some
V7/V6/V5 multi platform config option. The COMMON_CLK config option
already selects CLKDEV_LOOKUP so it's redundant to have this selected
again.

Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm/Kconfig             | 3 ---
 arch/arm/mach-vt8500/Kconfig | 1 -
 2 files changed, 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 97864aabc2a6..eeabdc5a3dd2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -435,7 +435,6 @@ config ARCH_PXA
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
 	select COMMON_CLK
-	select CLKDEV_LOOKUP
 	select CLKSRC_PXA
 	select CLKSRC_MMIO
 	select TIMER_OF
@@ -474,7 +473,6 @@ config ARCH_SA1100
 	bool "SA1100-based"
 	select ARCH_MTD_XIP
 	select ARCH_SPARSEMEM_ENABLE
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_PXA
 	select TIMER_OF if OF
@@ -495,7 +493,6 @@ config ARCH_SA1100
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ATAGS
-	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 8841199058ea..d01cdd9ad9c7 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -2,7 +2,6 @@
 config ARCH_VT8500
 	bool
 	select GPIOLIB
-	select CLKDEV_LOOKUP
 	select VT8500_TIMER
 	select PINCTRL
 	help
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/10] arm64: tegra: Remove redundant CLKDEV_LOOKUP selects

[Stephen Boyd]

The arm64 architecture selects COMMON_CLK at the toplevel ARM64 config.
The COMMON_CLK config option already selects CLKDEV_LOOKUP so it's
redundant to have this selected again for the Tegra specific config.

Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm64/Kconfig.platforms | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index b2b504ea6fd6..5d5d91feca44 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -236,7 +236,6 @@ config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_GIC_PM
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select TIMER_OF
 	select GENERIC_CLOCKEVENTS
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/10] clk: Allow the common clk framework to be selectable

[Stephen Boyd]

Enable build testing and configuration control of the common clk
framework so that more code coverage and testing can be done on the
common clk framework across various architectures. This also nicely
removes the requirement that architectures must select the framework
when they don't use it in architecture code.

There's one snag with doing this, and that's making sure that randconfig
builds don't select this option when some architecture or platform
implements 'struct clk' outside of the common clk framework. Introduce a
new config option 'HAVE_LEGACY_CLK' to indicate those platforms that
haven't migrated to the common clk framework and therefore shouldn't be
allowed to select this new config option. Also add a note that we hope
one day to remove this config entirely.

Based on a patch by Mark Brown <broonie@kernel.org>.

Cc: Mark Brown <broonie@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-c6x-dev@linux-c6x.org>
Cc: <linux-m68k@lists.linux-m68k.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/1470915049-15249-1-git-send-email-broonie@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm/Kconfig              |  2 ++
 arch/c6x/Kconfig              |  1 +
 arch/m68k/Kconfig.cpu         |  2 +-
 arch/mips/Kconfig             |  5 +++--
 arch/mips/loongson2ef/Kconfig |  2 +-
 arch/mips/ralink/Kconfig      |  4 ++++
 arch/sh/boards/Kconfig        |  5 +++++
 arch/unicore32/Kconfig        |  2 +-
 drivers/clk/Kconfig           | 17 +++++++++++++----
 9 files changed, 31 insertions(+), 9 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eeabdc5a3dd2..0606e1bbd7b6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -364,6 +364,7 @@ config ARCH_EP93XX
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
+	select HAVE_LEGACY_CLK
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -522,6 +523,7 @@ config ARCH_OMAP1
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
+	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index e65e8d82442a..6444ebfd06a6 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -11,6 +11,7 @@ config C6X
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select CLKDEV_LOOKUP
+	select HAVE_LEGACY_CLK
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 60ac1cd8b96f..bd2d29c22a10 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -28,7 +28,7 @@ config COLDFIRE
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM
 	select GPIOLIB
-	select HAVE_CLK
+	select HAVE_LEGACY_CLK
 
 endchoice
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e53a8dd5c19b..fcfbe98e6bb2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -181,7 +181,7 @@ config AR7
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select GPIOLIB
 	select VLYNQ
-	select HAVE_CLK
+	select HAVE_LEGACY_CLK
 	help
 	  Support for the Texas Instruments AR7 System-on-a-Chip
 	  family: TNETD7100, 7200 and 7300.
@@ -296,9 +296,9 @@ config BCM63XX
 	select SYS_HAS_EARLY_PRINTK
 	select SWAP_IO_SPACE
 	select GPIOLIB
-	select HAVE_CLK
 	select MIPS_L1_CACHE_SHIFT_4
 	select CLKDEV_LOOKUP
+	select HAVE_LEGACY_CLK
 	help
 	  Support for BCM63XX based boards
 
@@ -419,6 +419,7 @@ config LANTIQ
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select CLKDEV_LOOKUP
+	select HAVE_LEGACY_CLK
 	select USE_OF
 	select PINCTRL
 	select PINCTRL_LANTIQ
diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig
index 595dd48e1e4d..c9ec43afde73 100644
--- a/arch/mips/loongson2ef/Kconfig
+++ b/arch/mips/loongson2ef/Kconfig
@@ -46,7 +46,7 @@ config LEMOTE_MACH2F
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select HAVE_CLK
+	select HAVE_LEGACY_CLK
 	select FORCE_PCI
 	select I8259
 	select IRQ_MIPS_CPU
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 94e9ce994494..1240e6e0c28d 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -27,18 +27,22 @@ choice
 	config SOC_RT288X
 		bool "RT288x"
 		select MIPS_L1_CACHE_SHIFT_4
+		select HAVE_LEGACY_CLK
 		select HAVE_PCI
 
 	config SOC_RT305X
 		bool "RT305x"
+		select HAVE_LEGACY_CLK
 
 	config SOC_RT3883
 		bool "RT3883"
+		select HAVE_LEGACY_CLK
 		select HAVE_PCI
 
 	config SOC_MT7620
 		bool "MT7620/8"
 		select CPU_MIPSR2_IRQ_VI
+		select HAVE_LEGACY_CLK
 		select HAVE_PCI
 
 	config SOC_MT7621
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index cee24c308337..fb0ca0c1efe1 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -7,6 +7,11 @@ config SOLUTION_ENGINE
 config SH_ALPHA_BOARD
 	bool
 
+config SH_CUSTOM_CLK
+	def_bool y
+	depends on !SH_DEVICE_TREE
+	select HAVE_LEGACY_CLK
+
 config SH_DEVICE_TREE
 	bool
 	select OF
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 41fe944005f8..11ba1839d198 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -70,7 +70,7 @@ config ARCH_PUV3
 	def_bool y
 	select CPU_UCV2
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
+	select HAVE_LEGACY_CLK
 	select GPIOLIB
 
 # CONFIGs for ARCH_PUV3
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index bcb257baed06..890bed62196d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -7,8 +7,18 @@ config CLKDEV_LOOKUP
 config HAVE_CLK_PREPARE
 	bool
 
-config COMMON_CLK
+config HAVE_LEGACY_CLK # TODO: Remove once all legacy users are migrated
 	bool
+	select HAVE_CLK
+	help
+	  Select this option when the clock API in <linux/clk.h> is implemented
+	  by platform/architecture code. This method is deprecated. Modern
+	  code should select COMMON_CLK instead and not define a custom
+	  'struct clk'.
+
+menuconfig COMMON_CLK
+	bool "Common Clock Framework"
+	depends on !HAVE_LEGACY_CLK
 	select HAVE_CLK_PREPARE
 	select CLKDEV_LOOKUP
 	select SRCU
@@ -20,8 +30,7 @@ config COMMON_CLK
 	  Architectures utilizing the common struct clk should select
 	  this option.
 
-menu "Common Clock Framework"
-	depends on COMMON_CLK
+if COMMON_CLK
 
 config COMMON_CLK_WM831X
 	tristate "Clock driver for WM831x/2x PMICs"
@@ -362,4 +371,4 @@ source "drivers/clk/ti/Kconfig"
 source "drivers/clk/uniphier/Kconfig"
 source "drivers/clk/zynqmp/Kconfig"
 
-endmenu
+endif
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/10] ARM: mmp: Remove legacy clk code

[Stephen Boyd]

Remove all the legacy clk code that supports a non-common clk framework
implementation of 'struct clk' in mach-mmp. This code doesn't look to be
compiled anymore given that the MMP is fully supported in the
multi-platform config via ARCH_MULTIPLATFORM as of commit 377524dc4d77
("ARM: mmp: move into ARCH_MULTIPLATFORM"). The ARCH_MULTIPLATFORM
config selects COMMON_CLK and therefore the Makefile rule can never
actually compile the code in these files.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/arm/mach-mmp/Makefile       |   6 --
 arch/arm/mach-mmp/clock-mmp2.c   | 114 -------------------------------
 arch/arm/mach-mmp/clock-pxa168.c |  94 -------------------------
 arch/arm/mach-mmp/clock-pxa910.c |  70 -------------------
 arch/arm/mach-mmp/clock.c        | 105 ----------------------------
 arch/arm/mach-mmp/clock.h        |  65 ------------------
 6 files changed, 454 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/clock-mmp2.c
 delete mode 100644 arch/arm/mach-mmp/clock-pxa168.c
 delete mode 100644 arch/arm/mach-mmp/clock-pxa910.c
 delete mode 100644 arch/arm/mach-mmp/clock.c
 delete mode 100644 arch/arm/mach-mmp/clock.h

diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 7b3a7f979eec..e3758f7e1fe7 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -12,12 +12,6 @@ obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= mmp2.o
 obj-$(CONFIG_MMP_SRAM)		+= sram.o
 
-ifeq ($(CONFIG_COMMON_CLK), )
-obj-y				+= clock.o
-obj-$(CONFIG_CPU_PXA168)	+= clock-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= clock-pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= clock-mmp2.o
-endif
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
deleted file mode 100644
index 7536398bf1c1..000000000000
--- a/arch/arm/mach-mmp/clock-mmp2.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_RTC	APBC_REG(0x000)
-#define APBC_TWSI1	APBC_REG(0x004)
-#define APBC_TWSI2	APBC_REG(0x008)
-#define APBC_TWSI3	APBC_REG(0x00c)
-#define APBC_TWSI4	APBC_REG(0x010)
-#define APBC_KPC	APBC_REG(0x018)
-#define APBC_UART1	APBC_REG(0x02c)
-#define APBC_UART2	APBC_REG(0x030)
-#define APBC_UART3	APBC_REG(0x034)
-#define APBC_GPIO	APBC_REG(0x038)
-#define APBC_PWM0	APBC_REG(0x03c)
-#define APBC_PWM1	APBC_REG(0x040)
-#define APBC_PWM2	APBC_REG(0x044)
-#define APBC_PWM3	APBC_REG(0x048)
-#define APBC_SSP0	APBC_REG(0x04c)
-#define APBC_SSP1	APBC_REG(0x050)
-#define APBC_SSP2	APBC_REG(0x054)
-#define APBC_SSP3	APBC_REG(0x058)
-#define APBC_SSP4	APBC_REG(0x05c)
-#define APBC_SSP5	APBC_REG(0x060)
-#define APBC_TWSI5	APBC_REG(0x07c)
-#define APBC_TWSI6	APBC_REG(0x080)
-#define APBC_UART4	APBC_REG(0x088)
-
-#define APMU_USB	APMU_REG(0x05c)
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_SDH0	APMU_REG(0x054)
-#define APMU_SDH1	APMU_REG(0x058)
-#define APMU_SDH2	APMU_REG(0x0e8)
-#define APMU_SDH3	APMU_REG(0x0ec)
-
-static void sdhc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst |= clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst &= ~clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
-	.enable		= sdhc_clk_enable,
-	.disable	= sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, UART1, 1, 26000000);
-static APBC_CLK(uart2, UART2, 1, 26000000);
-static APBC_CLK(uart3, UART3, 1, 26000000);
-static APBC_CLK(uart4, UART4, 1, 26000000);
-static APBC_CLK(twsi1, TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, TWSI6, 0, 26000000);
-static APBC_CLK(gpio, GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
-	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
-	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
-	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL),
-	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
-void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			  phys_addr_t apbc_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
deleted file mode 100644
index 2d4a5d96a1ff..000000000000
--- a/arch/arm/mach-mmp/clock-pxa168.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_UART1	APBC_REG(0x000)
-#define APBC_UART2	APBC_REG(0x004)
-#define APBC_GPIO	APBC_REG(0x008)
-#define APBC_PWM1	APBC_REG(0x00c)
-#define APBC_PWM2	APBC_REG(0x010)
-#define APBC_PWM3	APBC_REG(0x014)
-#define APBC_PWM4	APBC_REG(0x018)
-#define APBC_RTC	APBC_REG(0x028)
-#define APBC_TWSI0	APBC_REG(0x02c)
-#define APBC_KPC	APBC_REG(0x030)
-#define APBC_TWSI1	APBC_REG(0x06c)
-#define APBC_UART3	APBC_REG(0x070)
-#define APBC_SSP1	APBC_REG(0x81c)
-#define APBC_SSP2	APBC_REG(0x820)
-#define APBC_SSP3	APBC_REG(0x84c)
-#define APBC_SSP4	APBC_REG(0x858)
-#define APBC_SSP5	APBC_REG(0x85c)
-
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_LCD	APMU_REG(0x04c)
-#define APMU_ETH	APMU_REG(0x0fc)
-#define APMU_USB	APMU_REG(0x05c)
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, UART1, 1, 14745600);
-static APBC_CLK(uart2, UART2, 1, 14745600);
-static APBC_CLK(uart3, UART3, 1, 14745600);
-static APBC_CLK(twsi0, TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PWM4, 1, 13000000);
-static APBC_CLK(ssp1, SSP1, 4, 0);
-static APBC_CLK(ssp2, SSP2, 4, 0);
-static APBC_CLK(ssp3, SSP3, 4, 0);
-static APBC_CLK(ssp4, SSP4, 4, 0);
-static APBC_CLK(ssp5, SSP5, 4, 0);
-static APBC_CLK(gpio, GPIO, 0, 13000000);
-static APBC_CLK(keypad, KPC, 0, 32000);
-static APBC_CLK(rtc, RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
-	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
-	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
-	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
-	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
-	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
-	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			    phys_addr_t apbc_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
deleted file mode 100644
index 3cd83ff91bb0..000000000000
--- a/arch/arm/mach-mmp/clock-pxa910.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_UART0	APBC_REG(0x000)
-#define APBC_UART1	APBC_REG(0x004)
-#define APBC_GPIO	APBC_REG(0x008)
-#define APBC_PWM1	APBC_REG(0x00c)
-#define APBC_PWM2	APBC_REG(0x010)
-#define APBC_PWM3	APBC_REG(0x014)
-#define APBC_PWM4	APBC_REG(0x018)
-#define APBC_SSP1	APBC_REG(0x01c)
-#define APBC_SSP2	APBC_REG(0x020)
-#define APBC_RTC	APBC_REG(0x028)
-#define APBC_TWSI0	APBC_REG(0x02c)
-#define APBC_KPC	APBC_REG(0x030)
-#define APBC_SSP3	APBC_REG(0x04c)
-#define APBC_TWSI1	APBC_REG(0x06c)
-
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_USB	APMU_REG(0x05c)
-
-static APBC_CLK(uart1, UART0, 1, 14745600);
-static APBC_CLK(uart2, UART1, 1, 14745600);
-static APBC_CLK(twsi0, TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PWM4, 1, 13000000);
-static APBC_CLK(gpio, GPIO, 0, 13000000);
-static APBC_CLK(rtc, RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
deleted file mode 100644
index 291fe41e3547..000000000000
--- a/arch/arm/mach-mmp/clock.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/clock.c
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "regs-apbc.h"
-#include "clock.h"
-
-static void apbc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void apbc_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apbc_clk_ops = {
-	.enable		= apbc_clk_enable,
-	.disable	= apbc_clk_disable,
-};
-
-static void apmu_clk_enable(struct clk *clk)
-{
-	__raw_writel(clk->enable_val, clk->clk_rst);
-}
-
-static void apmu_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apmu_clk_ops = {
-	.enable		= apmu_clk_enable,
-	.disable	= apmu_clk_disable,
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-	else
-		rate = clk->rate;
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
deleted file mode 100644
index 0256c894fa11..000000000000
--- a/arch/arm/mach-mmp/clock.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <linux/clkdev.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-
-	void __iomem	*clk_rst;	/* clock reset control register */
-	int		fnclksel;	/* functional clock select (APBC) */
-	uint32_t	enable_val;	/* value for clock enable (APMU) */
-	unsigned long	rate;
-	int		enabled;
-};
-
-extern struct clkops apbc_clk_ops;
-extern struct clkops apmu_clk_ops;
-
-#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= &apbc_clk_ops,		\
-}
-
-#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define APMU_CLK(_name, _reg, _eval, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= &apmu_clk_ops,		\
-}
-
-#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define INIT_CLKREG(_clk, _devname, _conname)			\
-	{							\
-		.clk		= _clk,				\
-		.dev_id		= _devname,			\
-		.con_id		= _conname,			\
-	}
-
-extern struct clk clk_pxa168_gpio;
-extern struct clk clk_pxa168_timers;
-- 
Sent by a computer, using git, on the internet


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 00/10] Allow COMMON_CLK to be selectable

[Arnd Bergmann]

On Thu, Apr 9, 2020 at 8:44 AM Stephen Boyd <sboyd@kernel.org> wrote:
>
> This patch series cleans up a handful of selects that were redundant and
> deletes presumably dead code with the goal of making it possible to add
> kunit tests for the CCF in the future. To do that, we introduce a
> "legacy" clk Kconfig option to mark code that hasn't migrated to the
> common clk framework and then make the COMMON_CLK config option visible
> in the menuconfig as long as that legacy option isn't enabled. I've also
> included a couple patches at the end that may be more controversial but
> helped me consolidate all this logic/code.
>
> I haven't done more than compile test a few configs for arm, arm64,
> h8300, and mips. More testing is welcome.
>
> The plan is that I'll just merge the whole pile through the clk tree. If
> the first five patches or the last three patches are better going
> through another tree like arm-soc or architecture trees that's fine too,
> but there are potential conflicts between trees so maybe it's better to
> just leave it all in one tree.
>
> Changes from v1:
>  * Fixed MIPS ralink build problem pointed out by Arnd
>  * Fixed meson mx sdio build due to bad Kconfig exposed by this change
>  * Picked up acks

Whole series

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

I also made a patch to completely remove the private clk implementation
for mips/loongson2f, but it obviously clashes with your series at the moment.

I'll send you what I have today and you can decide if you want to
add it to your series after it gets an Ack from the maintainers, or I'll
send it separately later.

     Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 07/10] clk: Allow the common clk framework to be selectable

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 432 bytes --]

On Wed, Apr 08, 2020 at 11:44:13PM -0700, Stephen Boyd wrote:
> Enable build testing and configuration control of the common clk
> framework so that more code coverage and testing can be done on the
> common clk framework across various architectures. This also nicely
> removes the requirement that architectures must select the framework
> when they don't use it in architecture code.

Reviwed-by: Mark Brown <broonie@kernel.org>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 01/10] ARM: Remove redundant COMMON_CLK selects

[Stephen Boyd]

Quoting Stephen Boyd (2020-04-08 23:44:07)
> The mulitplatform config already selects COMMON_CLK, so selecting it
> again is not useful. Remove these selects from ARM platforms that are
> part of the multiplatform build.
> 
> Reviewed-by: "Andreas Färber" <afaerber@suse.de> # actions
> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> # actions
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Alexander Shiyan <shc_work@mail.ru>
> Cc: Lubomir Rintel <lkundrak@v3.sk>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 02/10] ARM: Remove redundant CLKDEV_LOOKUP selects

[Stephen Boyd]

Quoting Stephen Boyd (2020-04-08 23:44:08)
> These platforms select COMMON_CLK indirectly through use of the
> ARCH_MULTIPLATFORM config option that they depend on implicitly via some
> V7/V6/V5 multi platform config option. The COMMON_CLK config option
> already selects CLKDEV_LOOKUP so it's redundant to have this selected
> again.
> 
> Cc: Tony Prisk <linux@prisktech.co.nz>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/10] arm64: tegra: Remove redundant CLKDEV_LOOKUP selects

[Stephen Boyd]

Quoting Stephen Boyd (2020-04-08 23:44:09)
> The arm64 architecture selects COMMON_CLK at the toplevel ARM64 config.
> The COMMON_CLK config option already selects CLKDEV_LOOKUP so it's
> redundant to have this selected again for the Tegra specific config.
> 
> Cc: Paul Walmsley <paul@pwsan.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 07/10] clk: Allow the common clk framework to be selectable

[Stephen Boyd]

Quoting Stephen Boyd (2020-04-08 23:44:13)
> Enable build testing and configuration control of the common clk
> framework so that more code coverage and testing can be done on the
> common clk framework across various architectures. This also nicely
> removes the requirement that architectures must select the framework
> when they don't use it in architecture code.
> 
> There's one snag with doing this, and that's making sure that randconfig
> builds don't select this option when some architecture or platform
> implements 'struct clk' outside of the common clk framework. Introduce a
> new config option 'HAVE_LEGACY_CLK' to indicate those platforms that
> haven't migrated to the common clk framework and therefore shouldn't be
> allowed to select this new config option. Also add a note that we hope
> one day to remove this config entirely.
> 
> Based on a patch by Mark Brown <broonie@kernel.org>.
> 
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Geert Uytterhoeven <geert@linux-m68k.org>
> Cc: Mark Salter <msalter@redhat.com>
> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Cc: Guan Xuetao <gxt@pku.edu.cn>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
> Cc: Rich Felker <dalias@libc.org>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: <linux-mips@vger.kernel.org>
> Cc: <linux-c6x-dev@linux-c6x.org>
> Cc: <linux-m68k@lists.linux-m68k.org>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: <linux-sh@vger.kernel.org>
> Link: https://lore.kernel.org/r/1470915049-15249-1-git-send-email-broonie@kernel.org
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 08/10] ARM: mmp: Remove legacy clk code

[Stephen Boyd]

Quoting Stephen Boyd (2020-04-08 23:44:14)
> Remove all the legacy clk code that supports a non-common clk framework
> implementation of 'struct clk' in mach-mmp. This code doesn't look to be
> compiled anymore given that the MMP is fully supported in the
> multi-platform config via ARCH_MULTIPLATFORM as of commit 377524dc4d77
> ("ARM: mmp: move into ARCH_MULTIPLATFORM"). The ARCH_MULTIPLATFORM
> config selects COMMON_CLK and therefore the Makefile rule can never
> actually compile the code in these files.
> 
> Cc: Lubomir Rintel <lkundrak@v3.sk>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
> ---

Applied to clk-next + a fix for problem reported in -next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel