[PATCH AUTOSEL 5.6 15/73] pwm: imx27: Fix clock handling in pwm_imx27_apply()

[PATCH AUTOSEL 5.6 15/73] pwm: imx27: Fix clock handling in pwm_imx27_apply()

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 15d4dbd601591858611184f9ddeb5bf21569159c ]

pwm_imx27_apply() enables the clocks if the previous PWM state was
disabled. Given that the clocks are supposed to be left on iff the PWM
is running, the decision to disable the clocks at the end of the
function must not depend on the previous state.

Without this fix the enable count of the two affected clocks increases
by one whenever ->apply() changes from one disabled state to another.

Fixes: bd88d319abe9 ("pwm: imx27: Unconditionally write state to hardware")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-imx27.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 35a7ac42269c2..7e5ed01529773 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -289,7 +289,7 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	writel(cr, imx->mmio_base + MX3_PWMCR);
 
-	if (!state->enabled && cstate.enabled)
+	if (!state->enabled)
 		pwm_imx27_clk_disable_unprepare(chip);
 
 	return 0;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 44/73] pwm: bcm2835: Dynamically allocate base

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 2c25b07e5ec119cab609e41407a1fb3fa61442f5 ]

The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().

Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-bcm2835.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index 91e24f01b54ed..d78f86f8e4621 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -166,6 +166,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.base = -1;
 	pc->chip.npwm = 2;
 	pc->chip.of_xlate = of_pwm_xlate_with_flags;
 	pc->chip.of_pwm_n_cells = 3;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel