[PATCH 54/59] drm/aspeed: Drop aspeed_gfx->fbdev

[PATCH 54/59] drm/aspeed: Drop aspeed_gfx->fbdev

[Daniel Vetter]

No longer used since the conversion to generic fbdev.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
---
 drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index a10358bb61ec..adc02940de6f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,7 +12,6 @@ struct aspeed_gfx {
 
 	struct drm_simple_display_pipe	pipe;
 	struct drm_connector		connector;
-	struct drm_fbdev_cma		*fbdev;
 };
 
 int aspeed_gfx_create_pipe(struct drm_device *drm);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 55/59] drm/aspeed: Use devm_drm_dev_alloc

[Daniel Vetter]

As usual, we can drop the drm_dev_put() and need to embed the
drm_device. Since it's so few, also go right ahead and leave
drm_device->dev_private set to NULL, so that we always use the
container_of() upcast, which is faster anyway.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
---
 drivers/gpu/drm/aspeed/aspeed_gfx.h      |  2 ++
 drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c |  2 +-
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 31 +++++++++---------------
 drivers/gpu/drm/aspeed/aspeed_gfx_out.c  |  2 +-
 4 files changed, 15 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index adc02940de6f..e7ca95827ae8 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -5,6 +5,7 @@
 #include <drm/drm_simple_kms_helper.h>
 
 struct aspeed_gfx {
+	struct drm_device		drm;
 	void __iomem			*base;
 	struct clk			*clk;
 	struct reset_control		*rst;
@@ -13,6 +14,7 @@ struct aspeed_gfx {
 	struct drm_simple_display_pipe	pipe;
 	struct drm_connector		connector;
 };
+#define to_aspeed_gfx(x) container_of(x, struct aspeed_gfx, drm)
 
 int aspeed_gfx_create_pipe(struct drm_device *drm);
 int aspeed_gfx_create_output(struct drm_device *drm);
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index 2184b8be6fd4..e54686c31a90 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -231,7 +231,7 @@ static const uint32_t aspeed_gfx_formats[] = {
 
 int aspeed_gfx_create_pipe(struct drm_device *drm)
 {
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 
 	return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs,
 					    aspeed_gfx_formats,
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index ada2f6aca906..6b27242b9ee3 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -77,7 +77,7 @@ static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
 static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 {
 	struct drm_device *drm = data;
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	u32 reg;
 
 	reg = readl(priv->base + CRT_CTRL1);
@@ -96,15 +96,10 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 static int aspeed_gfx_load(struct drm_device *drm)
 {
 	struct platform_device *pdev = to_platform_device(drm->dev);
-	struct aspeed_gfx *priv;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	struct resource *res;
 	int ret;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	drm->dev_private = priv;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->base = devm_ioremap_resource(drm->dev, res);
 	if (IS_ERR(priv->base))
@@ -187,8 +182,6 @@ static void aspeed_gfx_unload(struct drm_device *drm)
 {
 	drm_kms_helper_poll_fini(drm);
 	drm_mode_config_cleanup(drm);
-
-	drm->dev_private = NULL;
 }
 
 DEFINE_DRM_GEM_CMA_FOPS(fops);
@@ -216,27 +209,26 @@ static const struct of_device_id aspeed_gfx_match[] = {
 
 static int aspeed_gfx_probe(struct platform_device *pdev)
 {
-	struct drm_device *drm;
+	struct aspeed_gfx *priv;
 	int ret;
 
-	drm = drm_dev_alloc(&aspeed_gfx_driver, &pdev->dev);
-	if (IS_ERR(drm))
-		return PTR_ERR(drm);
+	priv = devm_drm_dev_alloc(&pdev->dev, &aspeed_gfx_driver,
+				  struct aspeed_gfx, drm);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
-	ret = aspeed_gfx_load(drm);
+	ret = aspeed_gfx_load(&priv->drm);
 	if (ret)
-		goto err_free;
+		return ret;
 
-	ret = drm_dev_register(drm, 0);
+	ret = drm_dev_register(&priv->drm, 0);
 	if (ret)
 		goto err_unload;
 
 	return 0;
 
 err_unload:
-	aspeed_gfx_unload(drm);
-err_free:
-	drm_dev_put(drm);
+	aspeed_gfx_unload(&priv->drm);
 
 	return ret;
 }
@@ -247,7 +239,6 @@ static int aspeed_gfx_remove(struct platform_device *pdev)
 
 	drm_dev_unregister(drm);
 	aspeed_gfx_unload(drm);
-	drm_dev_put(drm);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
index 67ee5fa10055..6759cb88415a 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
@@ -28,7 +28,7 @@ static const struct drm_connector_funcs aspeed_gfx_connector_funcs = {
 
 int aspeed_gfx_create_output(struct drm_device *drm)
 {
-	struct aspeed_gfx *priv = drm->dev_private;
+	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
 	int ret;
 
 	priv->connector.dpms = DRM_MODE_DPMS_OFF;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 56/59] drm/aspeed: Use managed drmm_mode_config_cleanup

[Daniel Vetter]

Since aspeed doesn't use devm_kzalloc anymore we can use the managed
mode config cleanup.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index 6b27242b9ee3..6e464b84a256 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -63,15 +63,15 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
 	.atomic_commit		= drm_atomic_helper_commit,
 };
 
-static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
+static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
 {
-	drm_mode_config_init(drm);
-
 	drm->mode_config.min_width = 0;
 	drm->mode_config.min_height = 0;
 	drm->mode_config.max_width = 800;
 	drm->mode_config.max_height = 600;
 	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
+
+	return drmm_mode_config_init(drm);
 }
 
 static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
@@ -144,7 +144,9 @@ static int aspeed_gfx_load(struct drm_device *drm)
 	writel(0, priv->base + CRT_CTRL1);
 	writel(0, priv->base + CRT_CTRL2);
 
-	aspeed_gfx_setup_mode_config(drm);
+	ret = aspeed_gfx_setup_mode_config(drm);
+	if (ret < 0)
+		return ret;
 
 	ret = drm_vblank_init(drm, 1);
 	if (ret < 0) {
@@ -181,7 +183,6 @@ static int aspeed_gfx_load(struct drm_device *drm)
 static void aspeed_gfx_unload(struct drm_device *drm)
 {
 	drm_kms_helper_poll_fini(drm);
-	drm_mode_config_cleanup(drm);
 }
 
 DEFINE_DRM_GEM_CMA_FOPS(fops);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 54/59] drm/aspeed: Drop aspeed_gfx->fbdev

[Sam Ravnborg]

On Wed, Apr 15, 2020 at 09:40:29AM +0200, Daniel Vetter wrote:
> No longer used since the conversion to generic fbdev.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: linux-aspeed@lists.ozlabs.org
> Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index a10358bb61ec..adc02940de6f 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -12,7 +12,6 @@ struct aspeed_gfx {
>  
>  	struct drm_simple_display_pipe	pipe;
>  	struct drm_connector		connector;
> -	struct drm_fbdev_cma		*fbdev;
>  };
>  
>  int aspeed_gfx_create_pipe(struct drm_device *drm);
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 55/59] drm/aspeed: Use devm_drm_dev_alloc

[Sam Ravnborg]

On Wed, Apr 15, 2020 at 09:40:30AM +0200, Daniel Vetter wrote:
> As usual, we can drop the drm_dev_put() and need to embed the
> drm_device. Since it's so few, also go right ahead and leave
> drm_device->dev_private set to NULL, so that we always use the
> container_of() upcast, which is faster anyway.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: linux-aspeed@lists.ozlabs.org
> Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h      |  2 ++
>  drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c |  2 +-
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 31 +++++++++---------------
>  drivers/gpu/drm/aspeed/aspeed_gfx_out.c  |  2 +-
>  4 files changed, 15 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index adc02940de6f..e7ca95827ae8 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -5,6 +5,7 @@
>  #include <drm/drm_simple_kms_helper.h>
>  
>  struct aspeed_gfx {
> +	struct drm_device		drm;
>  	void __iomem			*base;
>  	struct clk			*clk;
>  	struct reset_control		*rst;
> @@ -13,6 +14,7 @@ struct aspeed_gfx {
>  	struct drm_simple_display_pipe	pipe;
>  	struct drm_connector		connector;
>  };
> +#define to_aspeed_gfx(x) container_of(x, struct aspeed_gfx, drm)
>  
>  int aspeed_gfx_create_pipe(struct drm_device *drm);
>  int aspeed_gfx_create_output(struct drm_device *drm);
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> index 2184b8be6fd4..e54686c31a90 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -231,7 +231,7 @@ static const uint32_t aspeed_gfx_formats[] = {
>  
>  int aspeed_gfx_create_pipe(struct drm_device *drm)
>  {
> -	struct aspeed_gfx *priv = drm->dev_private;
> +	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>  
>  	return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs,
>  					    aspeed_gfx_formats,
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index ada2f6aca906..6b27242b9ee3 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -77,7 +77,7 @@ static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
>  static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
>  {
>  	struct drm_device *drm = data;
> -	struct aspeed_gfx *priv = drm->dev_private;
> +	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>  	u32 reg;
>  
>  	reg = readl(priv->base + CRT_CTRL1);
> @@ -96,15 +96,10 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
>  static int aspeed_gfx_load(struct drm_device *drm)
>  {
>  	struct platform_device *pdev = to_platform_device(drm->dev);
> -	struct aspeed_gfx *priv;
> +	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>  	struct resource *res;
>  	int ret;
>  
> -	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> -	drm->dev_private = priv;
> -
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	priv->base = devm_ioremap_resource(drm->dev, res);
>  	if (IS_ERR(priv->base))
> @@ -187,8 +182,6 @@ static void aspeed_gfx_unload(struct drm_device *drm)
>  {
>  	drm_kms_helper_poll_fini(drm);
>  	drm_mode_config_cleanup(drm);
> -
> -	drm->dev_private = NULL;
>  }
>  
>  DEFINE_DRM_GEM_CMA_FOPS(fops);
> @@ -216,27 +209,26 @@ static const struct of_device_id aspeed_gfx_match[] = {
>  
>  static int aspeed_gfx_probe(struct platform_device *pdev)
>  {
> -	struct drm_device *drm;
> +	struct aspeed_gfx *priv;
>  	int ret;
>  
> -	drm = drm_dev_alloc(&aspeed_gfx_driver, &pdev->dev);
> -	if (IS_ERR(drm))
> -		return PTR_ERR(drm);
> +	priv = devm_drm_dev_alloc(&pdev->dev, &aspeed_gfx_driver,
> +				  struct aspeed_gfx, drm);
> +	if (IS_ERR(priv))
> +		return PTR_ERR(priv);
>  
> -	ret = aspeed_gfx_load(drm);
> +	ret = aspeed_gfx_load(&priv->drm);
>  	if (ret)
> -		goto err_free;
> +		return ret;
>  
> -	ret = drm_dev_register(drm, 0);
> +	ret = drm_dev_register(&priv->drm, 0);
>  	if (ret)
>  		goto err_unload;
>  
>  	return 0;
>  
>  err_unload:
> -	aspeed_gfx_unload(drm);
> -err_free:
> -	drm_dev_put(drm);
> +	aspeed_gfx_unload(&priv->drm);
>  
>  	return ret;
>  }
> @@ -247,7 +239,6 @@ static int aspeed_gfx_remove(struct platform_device *pdev)
>  
>  	drm_dev_unregister(drm);
>  	aspeed_gfx_unload(drm);
> -	drm_dev_put(drm);
>  
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> index 67ee5fa10055..6759cb88415a 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> @@ -28,7 +28,7 @@ static const struct drm_connector_funcs aspeed_gfx_connector_funcs = {
>  
>  int aspeed_gfx_create_output(struct drm_device *drm)
>  {
> -	struct aspeed_gfx *priv = drm->dev_private;
> +	struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>  	int ret;
>  
>  	priv->connector.dpms = DRM_MODE_DPMS_OFF;
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 56/59] drm/aspeed: Use managed drmm_mode_config_cleanup

[Sam Ravnborg]

On Wed, Apr 15, 2020 at 09:40:31AM +0200, Daniel Vetter wrote:
> Since aspeed doesn't use devm_kzalloc anymore we can use the managed
> mode config cleanup.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: linux-aspeed@lists.ozlabs.org
> Cc: linux-arm-kernel@lists.infradead.org

Hmm, the helper function makes no sense, maybe embed it?

One Q below. Whith Q addressed:
Acked-by: Sam Ravnborg <sam@ravnborg.org>

> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index 6b27242b9ee3..6e464b84a256 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -63,15 +63,15 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
>  	.atomic_commit		= drm_atomic_helper_commit,
>  };
>  
> -static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
> +static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
>  {
> -	drm_mode_config_init(drm);
> -
>  	drm->mode_config.min_width = 0;
>  	drm->mode_config.min_height = 0;
>  	drm->mode_config.max_width = 800;
>  	drm->mode_config.max_height = 600;
>  	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
> +
> +	return drmm_mode_config_init(drm);

I do not see anything that documents that it is OK to init min/max
width/heigh not funcs before drmm_mode_config_init() is called.
Maybe drmm_mode_config_init() gain an memset(drm->mode_config),
and we loose all the assingments from before the call to init().

Also most (all?) other users of drmm_mode_config_init()
set them after the call to drmm_mode_config_init().
So re-order here and then embed while you are touching the code again.

	Sam

>  }
>  
>  static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
> @@ -144,7 +144,9 @@ static int aspeed_gfx_load(struct drm_device *drm)
>  	writel(0, priv->base + CRT_CTRL1);
>  	writel(0, priv->base + CRT_CTRL2);
>  
> -	aspeed_gfx_setup_mode_config(drm);
> +	ret = aspeed_gfx_setup_mode_config(drm);
> +	if (ret < 0)
> +		return ret;
>  
>  	ret = drm_vblank_init(drm, 1);
>  	if (ret < 0) {
> @@ -181,7 +183,6 @@ static int aspeed_gfx_load(struct drm_device *drm)
>  static void aspeed_gfx_unload(struct drm_device *drm)
>  {
>  	drm_kms_helper_poll_fini(drm);
> -	drm_mode_config_cleanup(drm);
>  }
>  
>  DEFINE_DRM_GEM_CMA_FOPS(fops);
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 56/59] drm/aspeed: Use managed drmm_mode_config_cleanup

[Daniel Vetter]

On Fri, Apr 24, 2020 at 08:10:02PM +0200, Sam Ravnborg wrote:
> On Wed, Apr 15, 2020 at 09:40:31AM +0200, Daniel Vetter wrote:
> > Since aspeed doesn't use devm_kzalloc anymore we can use the managed
> > mode config cleanup.
> > 
> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Joel Stanley <joel@jms.id.au>
> > Cc: Andrew Jeffery <andrew@aj.id.au>
> > Cc: linux-aspeed@lists.ozlabs.org
> > Cc: linux-arm-kernel@lists.infradead.org
> 
> Hmm, the helper function makes no sense, maybe embed it?
> 
> One Q below. Whith Q addressed:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> 
> > ---
> >  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 11 ++++++-----
> >  1 file changed, 6 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > index 6b27242b9ee3..6e464b84a256 100644
> > --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > @@ -63,15 +63,15 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
> >  	.atomic_commit		= drm_atomic_helper_commit,
> >  };
> >  
> > -static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
> > +static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
> >  {
> > -	drm_mode_config_init(drm);
> > -
> >  	drm->mode_config.min_width = 0;
> >  	drm->mode_config.min_height = 0;
> >  	drm->mode_config.max_width = 800;
> >  	drm->mode_config.max_height = 600;
> >  	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
> > +
> > +	return drmm_mode_config_init(drm);
> 
> I do not see anything that documents that it is OK to init min/max
> width/heigh not funcs before drmm_mode_config_init() is called.
> Maybe drmm_mode_config_init() gain an memset(drm->mode_config),
> and we loose all the assingments from before the call to init().
> 
> Also most (all?) other users of drmm_mode_config_init()
> set them after the call to drmm_mode_config_init().
> So re-order here and then embed while you are touching the code again.

Only reason I've done it like this is that it saves a few lines of diff
compared to other options.

Wrt calling stuff the wrong way round: We pretty much assume throughout
that structures are allocated with kzalloc, none of our _init() functions
in drm have a memset. We'd break the world if we start doing memset() in
random _init() functions I think.

Also the main aspeed_gfx_load() function is quite long already, smashing
more random stuff in there won't help it's readability.

Anyway I don't care, if you insist I'm happy to repaint this in whatever
color choice you deem best :-)

Cheers, Daniel

> 
> 	Sam
> 
> >  }
> >  
> >  static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
> > @@ -144,7 +144,9 @@ static int aspeed_gfx_load(struct drm_device *drm)
> >  	writel(0, priv->base + CRT_CTRL1);
> >  	writel(0, priv->base + CRT_CTRL2);
> >  
> > -	aspeed_gfx_setup_mode_config(drm);
> > +	ret = aspeed_gfx_setup_mode_config(drm);
> > +	if (ret < 0)
> > +		return ret;
> >  
> >  	ret = drm_vblank_init(drm, 1);
> >  	if (ret < 0) {
> > @@ -181,7 +183,6 @@ static int aspeed_gfx_load(struct drm_device *drm)
> >  static void aspeed_gfx_unload(struct drm_device *drm)
> >  {
> >  	drm_kms_helper_poll_fini(drm);
> > -	drm_mode_config_cleanup(drm);
> >  }
> >  
> >  DEFINE_DRM_GEM_CMA_FOPS(fops);
> > -- 
> > 2.25.1
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 56/59] drm/aspeed: Use managed drmm_mode_config_cleanup

[Sam Ravnborg]

On Tue, Apr 28, 2020 at 04:12:21PM +0200, Daniel Vetter wrote:
> On Fri, Apr 24, 2020 at 08:10:02PM +0200, Sam Ravnborg wrote:
> > On Wed, Apr 15, 2020 at 09:40:31AM +0200, Daniel Vetter wrote:
> > > Since aspeed doesn't use devm_kzalloc anymore we can use the managed
> > > mode config cleanup.
> > > 
> > > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > > Cc: Joel Stanley <joel@jms.id.au>
> > > Cc: Andrew Jeffery <andrew@aj.id.au>
> > > Cc: linux-aspeed@lists.ozlabs.org
> > > Cc: linux-arm-kernel@lists.infradead.org
> > 
> > Hmm, the helper function makes no sense, maybe embed it?
> > 
> > One Q below. Whith Q addressed:
> > Acked-by: Sam Ravnborg <sam@ravnborg.org>
> > 
> > > ---
> > >  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 11 ++++++-----
> > >  1 file changed, 6 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > > index 6b27242b9ee3..6e464b84a256 100644
> > > --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > > +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > > @@ -63,15 +63,15 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
> > >  	.atomic_commit		= drm_atomic_helper_commit,
> > >  };
> > >  
> > > -static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
> > > +static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
> > >  {
> > > -	drm_mode_config_init(drm);
> > > -
> > >  	drm->mode_config.min_width = 0;
> > >  	drm->mode_config.min_height = 0;
> > >  	drm->mode_config.max_width = 800;
> > >  	drm->mode_config.max_height = 600;
> > >  	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
> > > +
> > > +	return drmm_mode_config_init(drm);
> > 
> > I do not see anything that documents that it is OK to init min/max
> > width/heigh not funcs before drmm_mode_config_init() is called.
> > Maybe drmm_mode_config_init() gain an memset(drm->mode_config),
> > and we loose all the assingments from before the call to init().
> > 
> > Also most (all?) other users of drmm_mode_config_init()
> > set them after the call to drmm_mode_config_init().
> > So re-order here and then embed while you are touching the code again.
> 
> Only reason I've done it like this is that it saves a few lines of diff
> compared to other options.
> 
> Wrt calling stuff the wrong way round: We pretty much assume throughout
> that structures are allocated with kzalloc, none of our _init() functions
> in drm have a memset. We'd break the world if we start doing memset() in
> random _init() functions I think.
> 
> Also the main aspeed_gfx_load() function is quite long already, smashing
> more random stuff in there won't help it's readability.
> 
> Anyway I don't care, if you insist I'm happy to repaint this in whatever
> color choice you deem best :-)

From the principle of least suprises, you should at least call init and
then set min_width and friends.
This is easy to do in the helper, so easy to avoid the inlining I
suggested.

	Sam

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel