linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/3]
@ 2020-05-07 15:56 Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Gregory CLEMENT
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2020-05-07 15:56 UTC (permalink / raw)
  To: Cristian Birsan, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
	linux-kernel
  Cc: devicetree, Alexandre Belloni, Gregory CLEMENT,
	Ludovic Desroches, Rob Herring, Thomas Petazzoni,
	linux-arm-kernel

Hello,

A few month ago this series was sent and has not been merged while it
didn't have anything against it. I've ported the series onto v5.7-rc1,
added the acked by and reviewed by received on the first series and
took into account the comment from Robin Murphy for the last patch.

For the record this the original cover letter explaining the purpose
of this series:

The Atmel USB device controller is the only one having the description
of the End Point configuration in the device tree.

This configuration depend on the version of the controller used in the
SoC. This variation is already documented by the compatible string of
the controller.

In this series the configuration is associated to the compatible
string which allows to remove the EP child node from the device
tree. The main benefit of it, beyond the simplification of the device
tree, is the reduction of the size of the dtb which was too big to be
managed by the bootloader.

The first two patches should be merged through the USB subsystem while
the last one should be take by the a91 subsystem. Moreover this last
patch should be merged only once the change in the driver is merged.

Gregory

Gregory CLEMENT (3):
  usb: gadget: udc: atmel: Don't use DT to configure end point
  dt-bindings: usb: atmel: Mark EP child node as deprecated
  ARM: dts: at91: Remove the USB EP child node

 .../devicetree/bindings/usb/atmel-usb.txt     |  56 +-------
 arch/arm/boot/dts/at91sam9g45.dtsi            |  54 --------
 arch/arm/boot/dts/at91sam9rl.dtsi             |  54 --------
 arch/arm/boot/dts/at91sam9x5.dtsi             |  54 --------
 arch/arm/boot/dts/sama5d2.dtsi                | 120 ------------------
 arch/arm/boot/dts/sama5d3.dtsi                | 107 ----------------
 arch/arm/boot/dts/sama5d4.dtsi                | 120 ------------------
 drivers/usb/gadget/udc/atmel_usba_udc.c       | 112 ++++++++++------
 drivers/usb/gadget/udc/atmel_usba_udc.h       |  12 ++
 9 files changed, 87 insertions(+), 602 deletions(-)

-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point
  2020-05-07 15:56 [PATCH v2 0/3] Gregory CLEMENT
@ 2020-05-07 15:56 ` Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated Gregory CLEMENT
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2020-05-07 15:56 UTC (permalink / raw)
  To: Cristian Birsan, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
	linux-kernel
  Cc: devicetree, Alexandre Belloni, Gregory CLEMENT,
	Ludovic Desroches, Rob Herring, Thomas Petazzoni,
	linux-arm-kernel

The endpoint configuration used to be stored in the device tree,
however the configuration depend on the "version" of the controller
itself.

This information is already documented by the compatible string. It
then possible to just rely on the compatible string and completely
remove the full ep configuration done in the device tree as it was
already the case for all the other USB device controller.

Acked-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 112 +++++++++++++++---------
 drivers/usb/gadget/udc/atmel_usba_udc.h |  12 +++
 2 files changed, 84 insertions(+), 40 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 6e0432141c40..f4c83514e527 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2043,10 +2043,56 @@ static const struct usba_udc_errata at91sam9g45_errata = {
 	.pulse_bias = at91sam9g45_pulse_bias,
 };
 
+static const struct usba_ep_config ep_config_sam9[] __initconst = {
+	{ .nr_banks = 1 },				/* ep 0 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 1 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 2 */
+	{ .nr_banks = 3, .can_dma = 1 },		/* ep 3 */
+	{ .nr_banks = 3, .can_dma = 1 },		/* ep 4 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 5 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 6 */
+};
+
+static const struct usba_ep_config ep_config_sama5[] __initconst = {
+	{ .nr_banks = 1 },				/* ep 0 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 1 */
+	{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 },	/* ep 2 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 3 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 4 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 5 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 6 */
+	{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 },	/* ep 7 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 8 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 9 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 10 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 11 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 12 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 13 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 14 */
+	{ .nr_banks = 2, .can_isoc = 1 },		/* ep 15 */
+};
+
+static const struct usba_udc_config udc_at91sam9rl_cfg = {
+	.errata = &at91sam9rl_errata,
+	.config = ep_config_sam9,
+	.num_ep = ARRAY_SIZE(ep_config_sam9),
+};
+
+static const struct usba_udc_config udc_at91sam9g45_cfg = {
+	.errata = &at91sam9g45_errata,
+	.config = ep_config_sam9,
+	.num_ep = ARRAY_SIZE(ep_config_sam9),
+};
+
+static const struct usba_udc_config udc_sama5d3_cfg = {
+	.config = ep_config_sama5,
+	.num_ep = ARRAY_SIZE(ep_config_sama5),
+};
+
 static const struct of_device_id atmel_udc_dt_ids[] = {
-	{ .compatible = "atmel,at91sam9rl-udc", .data = &at91sam9rl_errata },
-	{ .compatible = "atmel,at91sam9g45-udc", .data = &at91sam9g45_errata },
-	{ .compatible = "atmel,sama5d3-udc" },
+	{ .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg },
+	{ .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg },
+	{ .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg },
 	{ /* sentinel */ }
 };
 
@@ -2055,18 +2101,19 @@ MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
 static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 						    struct usba_udc *udc)
 {
-	u32 val;
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct device_node *pp;
 	int i, ret;
 	struct usba_ep *eps, *ep;
+	const struct usba_udc_config *udc_config;
 
 	match = of_match_node(atmel_udc_dt_ids, np);
 	if (!match)
 		return ERR_PTR(-EINVAL);
 
-	udc->errata = match->data;
+	udc_config = match->data;
+	udc->errata = udc_config->errata;
 	udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
 	if (IS_ERR(udc->pmc))
 		udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
@@ -2082,8 +2129,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 
 	if (fifo_mode == 0) {
 		pp = NULL;
-		while ((pp = of_get_next_child(np, pp)))
-			udc->num_ep++;
+		udc->num_ep = udc_config->num_ep;
 		udc->configured_ep = 1;
 	} else {
 		udc->num_ep = usba_config_fifo_table(udc);
@@ -2100,52 +2146,38 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 
 	pp = NULL;
 	i = 0;
-	while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) {
+	while (i < udc->num_ep) {
+		const struct usba_ep_config *ep_cfg = &udc_config->config[i];
+
 		ep = &eps[i];
 
-		ret = of_property_read_u32(pp, "reg", &val);
-		if (ret) {
-			dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret);
-			goto err;
-		}
-		ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val;
+		ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i;
+
+		/* Only the first EP is 64 bytes */
+		if (ep->index == 0)
+			ep->fifo_size = 64;
+		else
+			ep->fifo_size = 1024;
 
-		ret = of_property_read_u32(pp, "atmel,fifo-size", &val);
-		if (ret) {
-			dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
-			goto err;
-		}
 		if (fifo_mode) {
-			if (val < udc->fifo_cfg[i].fifo_size) {
+			if (ep->fifo_size < udc->fifo_cfg[i].fifo_size)
 				dev_warn(&pdev->dev,
-					 "Using max fifo-size value from DT\n");
-				ep->fifo_size = val;
-			} else {
+					 "Using default max fifo-size value\n");
+			else
 				ep->fifo_size = udc->fifo_cfg[i].fifo_size;
-			}
-		} else {
-			ep->fifo_size = val;
 		}
 
-		ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
-		if (ret) {
-			dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
-			goto err;
-		}
+		ep->nr_banks = ep_cfg->nr_banks;
 		if (fifo_mode) {
-			if (val < udc->fifo_cfg[i].nr_banks) {
+			if (ep->nr_banks < udc->fifo_cfg[i].nr_banks)
 				dev_warn(&pdev->dev,
-					 "Using max nb-banks value from DT\n");
-				ep->nr_banks = val;
-			} else {
+					 "Using default max nb-banks value\n");
+			else
 				ep->nr_banks = udc->fifo_cfg[i].nr_banks;
-			}
-		} else {
-			ep->nr_banks = val;
 		}
 
-		ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
-		ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
+		ep->can_dma = ep_cfg->can_dma;
+		ep->can_isoc = ep_cfg->can_isoc;
 
 		sprintf(ep->name, "ep%d", ep->index);
 		ep->ep.name = ep->name;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index a0225e4543d4..48e332439ed5 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -290,6 +290,12 @@ struct usba_ep {
 #endif
 };
 
+struct usba_ep_config {
+	u8					nr_banks;
+	unsigned int				can_dma:1;
+	unsigned int				can_isoc:1;
+};
+
 struct usba_request {
 	struct usb_request			req;
 	struct list_head			queue;
@@ -307,6 +313,12 @@ struct usba_udc_errata {
 	void (*pulse_bias)(struct usba_udc *udc);
 };
 
+struct usba_udc_config {
+	const struct usba_udc_errata *errata;
+	const struct usba_ep_config *config;
+	const int num_ep;
+};
+
 struct usba_udc {
 	/* Protect hw registers from concurrent modifications */
 	spinlock_t lock;
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated
  2020-05-07 15:56 [PATCH v2 0/3] Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Gregory CLEMENT
@ 2020-05-07 15:56 ` Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 3/3] ARM: dts: at91: Remove the USB EP child node Gregory CLEMENT
  2020-05-07 16:01 ` [PATCH v2 0/3] Remove the USB EP configuration from device tree Gregory CLEMENT
  3 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2020-05-07 15:56 UTC (permalink / raw)
  To: Cristian Birsan, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
	linux-kernel
  Cc: devicetree, Alexandre Belloni, Rob Herring, Gregory CLEMENT,
	Ludovic Desroches, Rob Herring, Thomas Petazzoni,
	linux-arm-kernel

There is no need to describe the end point in the deice tree. These
properties won't be use anymore, so mark them as deprecated to keep
the old device tree documented.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 .../devicetree/bindings/usb/atmel-usb.txt     | 56 +------------------
 1 file changed, 3 insertions(+), 53 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 44e80153b148..423b99a8fd97 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -88,13 +88,15 @@ Required properties:
  - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
+
+Deprecated property:
  - ep childnode: To specify the number of endpoints and their properties.
 
 Optional properties:
  - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
    vbus is present (USB is connected).
 
-Required child node properties:
+Deprecated child node properties:
  - name: Name of the endpoint.
  - reg: Num of the endpoint.
  - atmel,fifo-size: Size of the fifo.
@@ -112,56 +114,4 @@ usb2: gadget@fff78000 {
 	clocks = <&utmi>, <&udphs_clk>;
 	clock-names = "hclk", "pclk";
 	atmel,vbus-gpio = <&pioB 19 0>;
-
-	ep@0 {
-		reg = <0>;
-		atmel,fifo-size = <64>;
-		atmel,nb-banks = <1>;
-	};
-
-	ep@1 {
-		reg = <1>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@2 {
-		reg = <2>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@3 {
-		reg = <3>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@4 {
-		reg = <4>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@5 {
-		reg = <5>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@6 {
-		reg = <6>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
 };
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 3/3] ARM: dts: at91: Remove the USB EP child node
  2020-05-07 15:56 [PATCH v2 0/3] Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Gregory CLEMENT
  2020-05-07 15:56 ` [PATCH v2 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated Gregory CLEMENT
@ 2020-05-07 15:56 ` Gregory CLEMENT
  2020-05-07 16:01 ` [PATCH v2 0/3] Remove the USB EP configuration from device tree Gregory CLEMENT
  3 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2020-05-07 15:56 UTC (permalink / raw)
  To: Cristian Birsan, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
	linux-kernel
  Cc: devicetree, Alexandre Belloni, Gregory CLEMENT,
	Ludovic Desroches, Rob Herring, Thomas Petazzoni,
	linux-arm-kernel

The endpoint configuration used to be stored in the device tree,
however the configuration depend on the "version" of the controller
itself.

Then the EP child node are useless and describe as deprecated in the
documentation binding: remove all the nodes from the SoC device tree
file. Remove also the #address-cells and #size-cells properties that
are no longer needed.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm/boot/dts/at91sam9g45.dtsi |  54 -------------
 arch/arm/boot/dts/at91sam9rl.dtsi  |  54 -------------
 arch/arm/boot/dts/at91sam9x5.dtsi  |  54 -------------
 arch/arm/boot/dts/sama5d2.dtsi     | 120 -----------------------------
 arch/arm/boot/dts/sama5d3.dtsi     | 107 -------------------------
 arch/arm/boot/dts/sama5d4.dtsi     | 120 -----------------------------
 6 files changed, 509 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index fd179097a4bf..342697f53cf7 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1195,8 +1195,6 @@ spi1: spi@fffa8000 {
 			};
 
 			usb2: gadget@fff78000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
@@ -1204,58 +1202,6 @@ usb2: gadget@fff78000 {
 				clocks = <&udphs_clk>, <&utmi>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
 			clk32k: sckc@fffffd50 {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index ea024e4b6e09..4d70194fd808 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -299,8 +299,6 @@ trigger3 {
 			};
 
 			usb0: gadget@fffd4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9rl-udc";
 				reg = <0x00600000 0x100000>,
 				      <0xfffd4000 0x4000>;
@@ -308,58 +306,6 @@ usb0: gadget@fffd4000 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
 			dma0: dma-controller@ffffe600 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 7c2eb93f8cac..948fe99ab6c3 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -867,8 +867,6 @@ spi1: spi@f0004000 {
 			};
 
 			usb2: gadget@f803c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
@@ -876,58 +874,6 @@ usb2: gadget@f803c000 {
 				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
 			watchdog: watchdog@fffffe40 {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index ab550d69db91..1ae7a2ea696b 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -113,8 +113,6 @@ nfc_sram: sram@100000 {
 		};
 
 		usb0: gadget@300000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "atmel,sama5d3-udc";
 			reg = <0x00300000 0x100000
 			       0xfc02c000 0x400>;
@@ -122,124 +120,6 @@ usb0: gadget@300000 {
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
-
-			ep@0 {
-				reg = <0>;
-				atmel,fifo-size = <64>;
-				atmel,nb-banks = <1>;
-			};
-
-			ep@1 {
-				reg = <1>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@2 {
-				reg = <2>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@3 {
-				reg = <3>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@4 {
-				reg = <4>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@5 {
-				reg = <5>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@6 {
-				reg = <6>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@7 {
-				reg = <7>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@8 {
-				reg = <8>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@9 {
-				reg = <9>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@10 {
-				reg = <10>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@11 {
-				reg = <11>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@12 {
-				reg = <12>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@13 {
-				reg = <13>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@14 {
-				reg = <14>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@15 {
-				reg = <15>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
 		};
 
 		usb1: ohci@400000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f11b018e9173..10e4492af234 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1420,8 +1420,6 @@ nfc_sram: sram@200000 {
 		};
 
 		usb0: gadget@500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "atmel,sama5d3-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
@@ -1429,111 +1427,6 @@ usb0: gadget@500000 {
 			clocks = <&udphs_clk>, <&utmi>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
-
-			ep@0 {
-				reg = <0>;
-				atmel,fifo-size = <64>;
-				atmel,nb-banks = <1>;
-			};
-
-			ep@1 {
-				reg = <1>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@2 {
-				reg = <2>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@3 {
-				reg = <3>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-			};
-
-			ep@4 {
-				reg = <4>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-			};
-
-			ep@5 {
-				reg = <5>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-			};
-
-			ep@6 {
-				reg = <6>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-			};
-
-			ep@7 {
-				reg = <7>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-			};
-
-			ep@8 {
-				reg = <8>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@9 {
-				reg = <9>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@10 {
-				reg = <10>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@11 {
-				reg = <11>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@12 {
-				reg = <12>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@13 {
-				reg = <13>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@14 {
-				reg = <14>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
-
-			ep@15 {
-				reg = <15>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-			};
 		};
 
 		usb1: ohci@600000 {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index c9c0316b5b0e..b0d79524277e 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -96,8 +96,6 @@ nfc_sram: sram@100000 {
 		};
 
 		usb0: gadget@400000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
 			       0xfc02c000 0x4000>;
@@ -105,124 +103,6 @@ usb0: gadget@400000 {
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
-
-			ep@0 {
-				reg = <0>;
-				atmel,fifo-size = <64>;
-				atmel,nb-banks = <1>;
-			};
-
-			ep@1 {
-				reg = <1>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@2 {
-				reg = <2>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <3>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@3 {
-				reg = <3>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@4 {
-				reg = <4>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@5 {
-				reg = <5>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@6 {
-				reg = <6>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@7 {
-				reg = <7>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-dma;
-				atmel,can-isoc;
-			};
-
-			ep@8 {
-				reg = <8>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@9 {
-				reg = <9>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@10 {
-				reg = <10>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@11 {
-				reg = <11>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@12 {
-				reg = <12>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@13 {
-				reg = <13>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@14 {
-				reg = <14>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
-
-			ep@15 {
-				reg = <15>;
-				atmel,fifo-size = <1024>;
-				atmel,nb-banks = <2>;
-				atmel,can-isoc;
-			};
 		};
 
 		usb1: ohci@500000 {
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/3] Remove the USB EP configuration from device tree
  2020-05-07 15:56 [PATCH v2 0/3] Gregory CLEMENT
                   ` (2 preceding siblings ...)
  2020-05-07 15:56 ` [PATCH v2 3/3] ARM: dts: at91: Remove the USB EP child node Gregory CLEMENT
@ 2020-05-07 16:01 ` Gregory CLEMENT
  3 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2020-05-07 16:01 UTC (permalink / raw)
  To: Cristian Birsan, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
	linux-kernel
  Cc: devicetree, Alexandre Belloni, Ludovic Desroches, Rob Herring,
	Thomas Petazzoni, linux-arm-kernel


Sorry I forgot to add back the title of the series which was:

"Remove the USB EP configuration from device tree"

Gregory

Gregory CLEMENT <gregory.clement@bootlin.com> writes:

> Hello,
>
> A few month ago this series was sent and has not been merged while it
> didn't have anything against it. I've ported the series onto v5.7-rc1,
> added the acked by and reviewed by received on the first series and
> took into account the comment from Robin Murphy for the last patch.
>
> For the record this the original cover letter explaining the purpose
> of this series:
>
> The Atmel USB device controller is the only one having the description
> of the End Point configuration in the device tree.
>
> This configuration depend on the version of the controller used in the
> SoC. This variation is already documented by the compatible string of
> the controller.
>
> In this series the configuration is associated to the compatible
> string which allows to remove the EP child node from the device
> tree. The main benefit of it, beyond the simplification of the device
> tree, is the reduction of the size of the dtb which was too big to be
> managed by the bootloader.
>
> The first two patches should be merged through the USB subsystem while
> the last one should be take by the a91 subsystem. Moreover this last
> patch should be merged only once the change in the driver is merged.
>
> Gregory
>
> Gregory CLEMENT (3):
>   usb: gadget: udc: atmel: Don't use DT to configure end point
>   dt-bindings: usb: atmel: Mark EP child node as deprecated
>   ARM: dts: at91: Remove the USB EP child node
>
>  .../devicetree/bindings/usb/atmel-usb.txt     |  56 +-------
>  arch/arm/boot/dts/at91sam9g45.dtsi            |  54 --------
>  arch/arm/boot/dts/at91sam9rl.dtsi             |  54 --------
>  arch/arm/boot/dts/at91sam9x5.dtsi             |  54 --------
>  arch/arm/boot/dts/sama5d2.dtsi                | 120 ------------------
>  arch/arm/boot/dts/sama5d3.dtsi                | 107 ----------------
>  arch/arm/boot/dts/sama5d4.dtsi                | 120 ------------------
>  drivers/usb/gadget/udc/atmel_usba_udc.c       | 112 ++++++++++------
>  drivers/usb/gadget/udc/atmel_usba_udc.h       |  12 ++
>  9 files changed, 87 insertions(+), 602 deletions(-)
>
> -- 
> 2.26.2
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH v2 0/3]
@ 2013-05-14  2:39 Simon Horman
  0 siblings, 0 replies; 6+ messages in thread
From: Simon Horman @ 2013-05-14  2:39 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

this short series enables the on-board ethernet
of the r8a7790 SoC for on lager board.

It is based on the renesas-next-20130513 tag of my renesas tree.

Dependencies noted in individual patches.

Simon Horman (3):
  ARM: shmobile: r8a7790: add Ether support
  ARM: shmobile: lager: enable Ether
  ARM: shmobile: lager: enable nfsroot in DTS

 arch/arm/boot/dts/r8a7790-lager.dts           |  2 +-
 arch/arm/mach-shmobile/board-lager.c          | 25 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7790.c        |  4 ++++
 arch/arm/mach-shmobile/include/mach/r8a7790.h |  3 +++
 arch/arm/mach-shmobile/setup-r8a7790.c        | 15 +++++++++++++++
 5 files changed, 48 insertions(+), 1 deletion(-)

-- 
1.8.2.1

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-07 16:01 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-07 15:56 [PATCH v2 0/3] Gregory CLEMENT
2020-05-07 15:56 ` [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Gregory CLEMENT
2020-05-07 15:56 ` [PATCH v2 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated Gregory CLEMENT
2020-05-07 15:56 ` [PATCH v2 3/3] ARM: dts: at91: Remove the USB EP child node Gregory CLEMENT
2020-05-07 16:01 ` [PATCH v2 0/3] Remove the USB EP configuration from device tree Gregory CLEMENT
  -- strict thread matches above, loose matches on Subject: below --
2013-05-14  2:39 [PATCH v2 0/3] Simon Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).