[PATCH v8] Add matrix keypad driver support for Mediatek SoCs

[PATCH v8] Add matrix keypad driver support for Mediatek SoCs

[Fengping Yu]

Change since v7:
- specify compatible property as const string
- add maxItem in required property
- squash keypad example nodes
- sort header file with alphabetic order
- align all define values and add MTK_ prefix to make more uniform
- change debounce value to default 16ms if not specified in dts
- remove extra braces
- separate clk prepare as an internal driver function
- add special compatible string
- modify CONFIG_KEYBOARD_MTK_KPD=m to build keypad as ko module

fengping.yu (3):
  dt-bindings: Add keypad devicetree documentation
  drivers: input: keyboard: Add mtk keypad driver
  configs: defconfig: Add CONFIG_ng.yu (3):
  dt-bindings: Add keypad devicetree documentation
  drivers: input: keyboard: Add mtk keypad driver
  configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m

 .../devicetree/bindings/input/mtk-kpd.yaml    |  94 +++++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/input/keyboard/Kconfig                |   9 +
 drivers/input/keyboard/Makefile               |   1 +
 drivers/input/keyboard/mtk-kpd.c              | 231 ++++++++++++++++++
 5 files changed, 336 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
 create mode 100644 drivers/input/keyboard/mtk-kpd.c

--
2.18.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 1/3] dt-bindings: Add keypad devicetree documentation

[Fengping Yu]

From: "fengping.yu" <fengping.yu@mediatek.com>

Add Mediatek matrix keypad dt-bindings doc as yaml schema.

Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
---
 .../devicetree/bindings/input/mtk-kpd.yaml    | 94 +++++++++++++++++++
 1 file changed, 94 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml

diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.yaml b/Documentation/devicetree/bindings/input/mtk-kpd.yaml
new file mode 100644
index 000000000000..d5068720e5b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mtk-kpd.yaml
@@ -0,0 +1,94 @@
+%YAML 1.2
+---
+version: 1
+
+$id: http://devicetree.org/schemas/input/mtk-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller device tree bindings
+
+maintainer:
+  - Fengping Yu <fengping.yu@mediatek.com>
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: "mediatek,mt6779-keypad"
+      - const: "mediatek, kp"
+
+  clock-names:
+    description: Names of the clocks listed in clocks property in the same order
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock
+    refs: devicetree/bindings/clocks/clock-bindings.txt for details.
+
+  interrupts:
+    description: A single interrupt specifier
+    maxItems: 1
+
+  linux,keymap:
+    description: The keymap for keys as described in the binding document
+    refs: devicetree/bindings/input/matrix-keymap.txt
+    minItems: 1
+    maxItems: 16
+
+  pinctrl-0:
+    description: Specify pin control groups used for this controller
+    refs: devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+  pinctrl-names:
+    description: Names for optional pin modes
+    maxItems: 1
+
+  reg:
+    description: The base address of the Keypad register bank
+    maxItems: 1
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  keypad,num-columns:
+    description: Number of column lines connected to the keypad controller,
+    it is not equal to PCB columns number, instead you should add required value
+    for each IC
+
+  keypad,num-rows:
+    description: Number of row lines connected to the keypad controller, it is
+    not equal to PCB rows number, instead you should add required value for each IC
+
+  mediatek,debounce-us:
+    description: Debounce interval in microseconds
+    maximum: 256000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keymap
+  - pinctrl
+  - clocks
+  - clock-names
+
+examples:
+  - |
+
+  keypad: kp@10010000 {
+    compatible = "mediatek,kp";
+    reg = <0 0x10010000 0 0x1000>;
+    linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN) >;
+    interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+    clocks = <&clk26m>;
+    clock-names = "kpd";
+    pinctrl-names = "default";
+    pinctrl-0 = <&kpd_gpios_def_cfg>;
+  };
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 2/3] drivers: input: keyboard: Add mtk keypad driver

[Fengping Yu]

From: "fengping.yu" <fengping.yu@mediatek.com>

This adds matrix keypad support for Mediatek SoCs.

Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
---
 drivers/input/keyboard/Kconfig   |   9 ++
 drivers/input/keyboard/Makefile  |   1 +
 drivers/input/keyboard/mtk-kpd.c | 231 +++++++++++++++++++++++++++++++
 3 files changed, 241 insertions(+)
 create mode 100644 drivers/input/keyboard/mtk-kpd.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 28de965a08d5..2b42015e6923 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -782,6 +782,15 @@ config KEYBOARD_BCM
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm-keypad.
 
+config KEYBOARD_MTK_KPD
+	tristate "MediaTek Keypad Support"
+	depends on OF && HAVE_CLK
+	help
+	  Say Y here if you want to use the keypad on MediaTek SoCs.
+	  If unsure, say N.
+	  To compile this driver as a module, choose M here: the
+	  module will be called mtk-kpd.
+
 config KEYBOARD_MTK_PMIC
 	tristate "MediaTek PMIC keys support"
 	depends on MFD_MT6397
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 1d689fdd5c00..6c9d852c377e 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_KPD)		+= mtk-kpd.o
 obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
new file mode 100644
index 000000000000..66c70c475ee2
--- /dev/null
+++ b/drivers/input/keyboard/mtk-kpd.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author Terry Chang <terry.chang@mediatek.com>
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MTK_KPD_NAME			"mtk-kpd"
+#define MTK_KPD_MEM			0x0004
+#define MTK_KPD_DEBOUNCE		0x0018
+#define MTK_KPD_DEBOUNCE_MASK		GENMASK(13, 0)
+#define MTK_KPD_DEBOUNCE_MAX_US		256000 /*256ms */
+#define MTK_KPD_NUM_MEMS		5
+#define MTK_KPD_NUM_BITS		136	/* 4*32+8 MEM5 only use 8 BITS */
+
+struct mtk_keypad {
+	struct regmap *regmap;
+	struct input_dev *input_dev;
+	struct clk *clk;
+	void __iomem *base;
+	bool wakeup;
+	u32 n_rows;
+	u32 n_cols;
+	DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
+};
+
+static const struct regmap_config keypad_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = 36,
+};
+
+static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
+{
+	struct mtk_keypad *keypad = dev_id;
+	unsigned short *keycode = keypad->input_dev->keycode;
+	DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
+	DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
+	int bit_nr;
+	int pressed;
+	unsigned short code;
+
+	regmap_raw_read(keypad->regmap, MTK_KPD_MEM, new_state, MTK_KPD_NUM_MEMS);
+
+	bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
+
+	for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
+		/* 1: not pressed, 0: pressed */
+		pressed = !test_bit(bit_nr, new_state);
+		dev_dbg(&keypad->input_dev->dev, "%s",
+			pressed ? "pressed" : "released");
+
+		/* 32bit register only use low 16bit as keypad mem register */
+		code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
+
+		input_report_key(keypad->input_dev, code, pressed);
+		input_sync(keypad->input_dev);
+
+		dev_dbg(&keypad->input_dev->dev,
+			"report Linux keycode = %d\n", code);
+	}
+
+	bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
+
+	return IRQ_HANDLED;
+}
+
+static int kpd_probe_clock(struct platform_device *pdev, struct clk *clk)
+{
+	int ret;
+
+	clk = devm_clk_get(&pdev->dev, "kpd");
+	if (IS_ERR(clk))
+		return clk;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+					(void (*)(void *))clk_disable_unprepare,
+					clk);
+
+	return ret;
+}
+
+static int kpd_pdrv_probe(struct platform_device *pdev)
+{
+	struct mtk_keypad *keypad;
+	struct pinctrl *keypad_pinctrl;
+	struct pinctrl_state *kpd_default;
+	unsigned int irqnr;
+	u32 debounce;
+	int ret;
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	keypad->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(keypad->base))
+		return PTR_ERR(keypad->base);
+
+	keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
+						keypad->base,
+						&keypad_regmap_cfg);
+	if (IS_ERR(keypad->regmap)) {
+		dev_err(&pdev->dev,
+			"regmap init failed:%ld\n", PTR_ERR(keypad->regmap));
+		return PTR_ERR(keypad->regmap);
+	}
+
+	bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
+
+	keypad->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!keypad->input_dev) {
+		dev_err(&pdev->dev, "Failed to allocate input dev\n");
+		return -ENOMEM;
+	}
+
+	keypad->input_dev->name = MTK_KPD_NAME;
+	keypad->input_dev->id.bustype = BUS_HOST;
+
+	ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
+					     &keypad->n_cols);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to parse keypad params\n");
+		return ret;
+	}
+
+	if (device_property_read_u32(&pdev->dev, "mediatek,debounce-us",
+					&debounce))
+		debounce = 16000;
+
+	if (debounce > MTK_KPD_DEBOUNCE_MAX_US) {
+		dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time 256ms\n");
+		return -EINVAL;
+	}
+
+	keypad->wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
+
+	dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
+		keypad->n_rows, keypad->n_cols, debounce);
+
+	ret = matrix_keypad_build_keymap(NULL, NULL,
+					keypad->n_rows,
+					keypad->n_cols,
+					NULL,
+					keypad->input_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		return ret;
+	}
+
+	input_set_drvdata(keypad->input_dev, keypad);
+
+	regmap_write(keypad->regmap, KP_DEBOUNCE,
+		     debounce * 32 / 1000 & MTK_KPD_DEBOUNCE_MASK);
+
+	if (kpd_probe_clock(pdev, keypad->clk)) {
+		dev_err(&pdev->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	keypad_pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(keypad_pinctrl))
+		return PTR_ERR(keypad_pinctrl);
+
+	kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
+	if (IS_ERR(kpd_default)) {
+		dev_err(&pdev->dev, "No default pinctrl state\n");
+		return PTR_ERR(kpd_default);
+	}
+
+	pinctrl_select_state(keypad_pinctrl, kpd_default);
+
+	irqnr = platform_get_irq(pdev, 0);
+	if (irqnr < 0) {
+		dev_err(&pdev->dev, "Failed to get irq\n");
+		return -irqnr;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, irqnr,
+				NULL, kpd_irq_handler, 0,
+				MTK_KPD_NAME, keypad);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
+						irqnr, ret);
+		return ret;
+	}
+
+	ret = input_register_device(keypad->input_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register device\n");
+		return ret;
+	}
+
+	device_init_wakeup(&pdev->dev, keypad->wakeup);
+
+	return 0;
+}
+
+static const struct of_device_id kpd_of_match[] = {
+	{.compatible = "mediatek, mt6779-keypad"},
+	{.compatible = "mediatek,kp"},
+	{/*sentinel*/}
+};
+
+static struct platform_driver kpd_pdrv = {
+	.probe = kpd_pdrv_probe,
+	.driver = {
+		   .name = MTK_KPD_NAME,
+		   .of_match_table = kpd_of_match,
+	},
+};
+module_platform_driver(kpd_pdrv);
+
+MODULE_AUTHOR("Mediatek Corporation");
+MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m

[Fengping Yu]

From: "fengping.yu" <fengping.yu@mediatek.com>

Add Mediatek matrix keypad support in defconfig.

Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 24e534d85045..112ced090b21 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -349,6 +349,7 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_SNVS_PWRKEY=m
 CONFIG_KEYBOARD_IMX_SC_KEY=m
 CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_MTK_KPD=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_INPUT_MISC=y
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 2/3] drivers: input: keyboard: Add mtk keypad driver

[Marco Felsch]

Hi,

On 20-05-15 14:20, Fengping Yu wrote:
> From: "fengping.yu" <fengping.yu@mediatek.com>
> 
> This adds matrix keypad support for Mediatek SoCs.
> 
> Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
> ---
>  drivers/input/keyboard/Kconfig   |   9 ++
>  drivers/input/keyboard/Makefile  |   1 +
>  drivers/input/keyboard/mtk-kpd.c | 231 +++++++++++++++++++++++++++++++
>  3 files changed, 241 insertions(+)
>  create mode 100644 drivers/input/keyboard/mtk-kpd.c
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 28de965a08d5..2b42015e6923 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -782,6 +782,15 @@ config KEYBOARD_BCM
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called bcm-keypad.
>  
> +config KEYBOARD_MTK_KPD
> +	tristate "MediaTek Keypad Support"
> +	depends on OF && HAVE_CLK

Please drop those deps and instead use:
depends on ARCH_MEDIATEK && ARM64

There are still some missing deps:

select CONFIG_REGMAP_MMIO
select INPUT_MATRIXKMAP

and check which clock driver must be enabled:

COMMON_CLK_MT6779_MMSYS
COMMON_CLK_MT6779_IMGSYS
COMMON_CLK_MT6779_IPESYS
COMMON_CLK_MT6779_CAMSYS
COMMON_CLK_MT6779_VDECSYS
COMMON_CLK_MT6779_VENCSYS
COMMON_CLK_MT6779_MFGCFG
COMMON_CLK_MT6779_AUDSYS


> +	help
> +	  Say Y here if you want to use the keypad on MediaTek SoCs.
> +	  If unsure, say N.
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called mtk-kpd.
> +
>  config KEYBOARD_MTK_PMIC
>  	tristate "MediaTek PMIC keys support"
>  	depends on MFD_MT6397
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 1d689fdd5c00..6c9d852c377e 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
>  obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
>  obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
>  obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK_KPD)		+= mtk-kpd.o
>  obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
>  obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
>  obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..66c70c475ee2
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,231 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Terry Chang <terry.chang@mediatek.com>
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/input/matrix_keypad.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define MTK_KPD_NAME			"mtk-kpd"
> +#define MTK_KPD_MEM			0x0004
> +#define MTK_KPD_DEBOUNCE		0x0018
> +#define MTK_KPD_DEBOUNCE_MASK		GENMASK(13, 0)
> +#define MTK_KPD_DEBOUNCE_MAX_US		256000 /*256ms */

Thanks for aligning the defines but the 256ms comment is still useless
as Andy already said.

> +#define MTK_KPD_NUM_MEMS		5
> +#define MTK_KPD_NUM_BITS		136	/* 4*32+8 MEM5 only use 8 BITS */
> +
> +struct mtk_keypad {
> +	struct regmap *regmap;
> +	struct input_dev *input_dev;
> +	struct clk *clk;
> +	void __iomem *base;
> +	bool wakeup;
> +	u32 n_rows;
> +	u32 n_cols;
> +	DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
> +};
> +
> +static const struct regmap_config keypad_regmap_cfg = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = sizeof(u32),
> +	.max_register = 36,
> +};
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> +	struct mtk_keypad *keypad = dev_id;
> +	unsigned short *keycode = keypad->input_dev->keycode;
> +	DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
> +	DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
> +	int bit_nr;
> +	int pressed;
> +	unsigned short code;
> +
> +	regmap_raw_read(keypad->regmap, MTK_KPD_MEM, new_state, MTK_KPD_NUM_MEMS);
> +
> +	bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> +	for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
> +		/* 1: not pressed, 0: pressed */
> +		pressed = !test_bit(bit_nr, new_state);
> +		dev_dbg(&keypad->input_dev->dev, "%s",
> +			pressed ? "pressed" : "released");
> +
> +		/* 32bit register only use low 16bit as keypad mem register */
> +		code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
> +
> +		input_report_key(keypad->input_dev, code, pressed);
> +		input_sync(keypad->input_dev);
> +
> +		dev_dbg(&keypad->input_dev->dev,
> +			"report Linux keycode = %d\n", code);
> +	}
> +
> +	bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int kpd_probe_clock(struct platform_device *pdev, struct clk *clk)
> +{
> +	int ret;
> +
> +	clk = devm_clk_get(&pdev->dev, "kpd");
> +	if (IS_ERR(clk))
> +		return clk;
> +
> +	ret = clk_prepare_enable(clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +					(void (*)(void *))clk_disable_unprepare,
							^
						Please avoid this and
						instead use a driver
						internal function.

> +					clk);
> +
> +	return ret;
> +}

That was not my intention. You can do all the stuff within the probe()
routine.

> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> +	struct mtk_keypad *keypad;
> +	struct pinctrl *keypad_pinctrl;
> +	struct pinctrl_state *kpd_default;
> +	unsigned int irqnr;
> +	u32 debounce;
> +	int ret;
> +
> +	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> +	if (!keypad)
> +		return -ENOMEM;
> +
> +	keypad->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(keypad->base))
> +		return PTR_ERR(keypad->base);
> +
> +	keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
> +						keypad->base,
> +						&keypad_regmap_cfg);
> +	if (IS_ERR(keypad->regmap)) {
> +		dev_err(&pdev->dev,
> +			"regmap init failed:%ld\n", PTR_ERR(keypad->regmap));
> +		return PTR_ERR(keypad->regmap);
> +	}
> +
> +	bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> +	keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> +	if (!keypad->input_dev) {
> +		dev_err(&pdev->dev, "Failed to allocate input dev\n");
> +		return -ENOMEM;
> +	}
> +
> +	keypad->input_dev->name = MTK_KPD_NAME;
> +	keypad->input_dev->id.bustype = BUS_HOST;
> +
> +	ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
> +					     &keypad->n_cols);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to parse keypad params\n");
> +		return ret;
> +	}
> +
> +	if (device_property_read_u32(&pdev->dev, "mediatek,debounce-us",
> +					&debounce))

Did you executed checkpatch.pl here? There are a few more style issues
within the patch.

> +		debounce = 16000;
> +
> +	if (debounce > MTK_KPD_DEBOUNCE_MAX_US) {
> +		dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time 256ms\n");
> +		return -EINVAL;
> +	}
> +
> +	keypad->wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
> +
> +	dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
> +		keypad->n_rows, keypad->n_cols, debounce);
> +
> +	ret = matrix_keypad_build_keymap(NULL, NULL,
> +					keypad->n_rows,
> +					keypad->n_cols,
> +					NULL,
> +					keypad->input_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to build keymap\n");
> +		return ret;
> +	}
> +
> +	input_set_drvdata(keypad->input_dev, keypad);

This is useless.

> +
> +	regmap_write(keypad->regmap, KP_DEBOUNCE,
> +		     debounce * 32 / 1000 & MTK_KPD_DEBOUNCE_MASK);
> +
> +	if (kpd_probe_clock(pdev, keypad->clk)) {
> +		dev_err(&pdev->dev, "Failed to enable clock\n");
> +		return ret;
> +	}
> +
> +	keypad_pinctrl = devm_pinctrl_get(&pdev->dev);
> +	if (IS_ERR(keypad_pinctrl))
> +		return PTR_ERR(keypad_pinctrl);
> +
> +	kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
> +	if (IS_ERR(kpd_default)) {
> +		dev_err(&pdev->dev, "No default pinctrl state\n");
> +		return PTR_ERR(kpd_default);
> +	}
> +
> +	pinctrl_select_state(keypad_pinctrl, kpd_default);
> +
> +	irqnr = platform_get_irq(pdev, 0);
> +	if (irqnr < 0) {
> +		dev_err(&pdev->dev, "Failed to get irq\n");

Andy already said that platform_get_irq() prints a error so you can just
'return -irqnr'.

> +		return -irqnr;
> +	}
> +
> +	ret = devm_request_threaded_irq(&pdev->dev, irqnr,
> +				NULL, kpd_irq_handler, 0,
> +				MTK_KPD_NAME, keypad);

Still missaligned, pls use checkpatch.pl

> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
> +						irqnr, ret);
> +		return ret;
> +	}
> +
> +	ret = input_register_device(keypad->input_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to register device\n");
> +		return ret;
> +	}
> +
> +	device_init_wakeup(&pdev->dev, keypad->wakeup);
> +
> +	return 0;

Here we can 'return device_init_wakeup(&pdev->dev, keypad->wakeup);'

> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> +	{.compatible = "mediatek, mt6779-keypad"},
> +	{.compatible = "mediatek,kp"},
				 ^
                         Missing whitespace

> +	{/*sentinel*/}
         ^	     ^
	 Missing whitespaces

Regards,
  Marco

> +};
> +
> +static struct platform_driver kpd_pdrv = {
> +	.probe = kpd_pdrv_probe,
> +	.driver = {
> +		   .name = MTK_KPD_NAME,
> +		   .of_match_table = kpd_of_match,
> +	},
> +};
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.18.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8] Add matrix keypad driver support for Mediatek SoCs

[Andy Shevchenko]

On Fri, May 15, 2020 at 02:20:04PM +0800, Fengping Yu wrote:
> 
> Change since v7:
> - specify compatible property as const string
> - add maxItem in required property
> - squash keypad example nodes
> - sort header file with alphabetic order
> - align all define values and add MTK_ prefix to make more uniform
> - change debounce value to default 16ms if not specified in dts
> - remove extra braces
> - separate clk prepare as an internal driver function
> - add special compatible string
> - modify CONFIG_KEYBOARD_MTK_KPD=m to build keypad as ko module

You forgot to address at least some of my comments...

> 
> fengping.yu (3):
>   dt-bindings: Add keypad devicetree documentation
>   drivers: input: keyboard: Add mtk keypad driver
>   configs: defconfig: Add CONFIG_ng.yu (3):
>   dt-bindings: Add keypad devicetree documentation
>   drivers: input: keyboard: Add mtk keypad driver
>   configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m
> 
>  .../devicetree/bindings/input/mtk-kpd.yaml    |  94 +++++++
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/input/keyboard/Kconfig                |   9 +
>  drivers/input/keyboard/Makefile               |   1 +
>  drivers/input/keyboard/mtk-kpd.c              | 231 ++++++++++++++++++
>  5 files changed, 336 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
>  create mode 100644 drivers/input/keyboard/mtk-kpd.c
> 
> --
> 2.18.0
> 

-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 2/3] drivers: input: keyboard: Add mtk keypad driver

[Andy Shevchenko]

On Fri, May 15, 2020 at 11:30:16AM +0200, Marco Felsch wrote:
> On 20-05-15 14:20, Fengping Yu wrote:

...

> > +	depends on OF && HAVE_CLK
> 
> Please drop those deps and instead use:

+1

> depends on ARCH_MEDIATEK && ARM64

I would go even further
	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST

> There are still some missing deps:
> 
> select CONFIG_REGMAP_MMIO
> select INPUT_MATRIXKMAP

...

> > +#define MTK_KPD_DEBOUNCE_MAX_US		256000 /*256ms */
> 
> Thanks for aligning the defines but the 256ms comment is still useless
> as Andy already said.

Yes, it seems my comments partially (?) have been ignored.

-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 2/3] drivers: input: keyboard: Add mtk keypad driver

[Yingjoe Chen]

On Fri, 2020-05-15 at 14:40 +0300, Andy Shevchenko wrote:
> On Fri, May 15, 2020 at 11:30:16AM +0200, Marco Felsch wrote:
> > On 20-05-15 14:20, Fengping Yu wrote:
> 
> ...
> 
> > > +	depends on OF && HAVE_CLK
> > 
> > Please drop those deps and instead use:
> 
> +1
> 
> > depends on ARCH_MEDIATEK && ARM64
> 
> I would go even further
> 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST

Please drop ARM64. This works for 32bits SoC as well.

Joe.C


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel