Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Sumit Garg <sumit.garg@linaro.org>,
	kernel-team@android.com, Russell King <linux@arm.linux.org.uk>,
	Jason Cooper <jason@lakedaemon.net>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Will Deacon <will@kernel.org>
Subject: [PATCH 08/11] irqchip/gic: Configure SGIs as standard interrupts
Date: Tue, 19 May 2020 17:17:52 +0100
Message-ID: <20200519161755.209565-9-maz@kernel.org> (raw)
In-Reply-To: <20200519161755.209565-1-maz@kernel.org>

Change the way we deal with GIC SGIs by turning them into proper
IRQs, and calling into the arch code to register the interrupt range
instead of a callback.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic.c | 113 +++++++++++++++++++++++++-------------
 1 file changed, 74 insertions(+), 39 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index e289810e794c..8d146ac28c74 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -47,6 +47,8 @@
 
 #include "irq-gic-common.h"
 
+#define GIC_IRQ_TYPE_SGI	0x561
+
 #ifdef CONFIG_ARM64
 #include <asm/cpufeature.h>
 
@@ -335,31 +337,22 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
 		irqnr = irqstat & GICC_IAR_INT_ID_MASK;
 
-		if (likely(irqnr > 15 && irqnr < 1020)) {
-			if (static_branch_likely(&supports_deactivate_key))
-				writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
-			isb();
-			handle_domain_irq(gic->domain, irqnr, regs);
-			continue;
-		}
-		if (irqnr < 16) {
+		if (unlikely(irqnr >= 1020))
+			break;
+
+		if (static_branch_likely(&supports_deactivate_key))
 			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
-			if (static_branch_likely(&supports_deactivate_key))
-				writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE);
-#ifdef CONFIG_SMP
-			/*
-			 * Ensure any shared data written by the CPU sending
-			 * the IPI is read after we've read the ACK register
-			 * on the GIC.
-			 *
-			 * Pairs with the write barrier in gic_raise_softirq
-			 */
+		isb();
+
+		/*
+		 * Ensure any shared data written by the CPU sending the IPI
+		 * is read after we've read the ACK register on the GIC.
+		 *
+		 * Pairs with the write barrier in gic_ipi_send_mask
+		 */
+		if (irqnr <= 15)
 			smp_rmb();
-			handle_IPI(irqnr, regs);
-#endif
-			continue;
-		}
-		break;
+		handle_domain_irq(gic->domain, irqnr, regs);
 	} while (1);
 }
 
@@ -801,14 +794,14 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 	return IRQ_SET_MASK_OK_DONE;
 }
 
-static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+static void gic_ipi_send_mask(struct irq_data *d, const struct cpumask *mask)
 {
 	int cpu;
 	unsigned long flags, map = 0;
 
 	if (unlikely(nr_cpu_ids == 1)) {
 		/* Only one CPU? let's do a self-IPI... */
-		writel_relaxed(2 << 24 | irq,
+		writel_relaxed(2 << 24 | d->hwirq,
 			       gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 		return;
 	}
@@ -826,7 +819,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	dmb(ishst);
 
 	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | d->hwirq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 
 	gic_unlock_irqrestore(flags);
 }
@@ -839,14 +832,40 @@ static int gic_starting_cpu(unsigned int cpu)
 
 static __init void gic_smp_init(void)
 {
-	set_smp_cross_call(gic_raise_softirq);
+	struct irq_fwspec sgi_fwspec = {
+		.fwnode		= gic_data[0].domain->fwnode,
+	};
+	int base_sgi;
+
 	cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING,
 				  "irqchip/arm/gic:starting",
 				  gic_starting_cpu, NULL);
+
+	if (is_of_node(gic_data[0].domain->fwnode)) {
+		/* DT */
+		sgi_fwspec.param_count = 3;
+		sgi_fwspec.param[0] = GIC_IRQ_TYPE_SGI;
+		sgi_fwspec.param[1] = 0;
+		sgi_fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
+	} else {
+		/* ACPI */
+		sgi_fwspec.param_count = 2;
+		sgi_fwspec.param[0] = 0;
+		sgi_fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
+	}
+
+	base_sgi = __irq_domain_alloc_irqs(gic_data[0].domain, -1, 8,
+					   NUMA_NO_NODE, &sgi_fwspec,
+					   false, NULL);
+	if (WARN_ON(base_sgi <= 0))
+		return;
+
+	set_smp_ipi_range(base_sgi, 8);
 }
 #else
 #define gic_smp_init()		do { } while(0)
 #define gic_set_affinity	NULL
+#define gic_ipi_send_mask	NULL
 #endif
 
 #ifdef CONFIG_BL_SWITCHER
@@ -993,16 +1012,26 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
 {
 	struct gic_chip_data *gic = d->host_data;
 
-	if (hw < 32) {
+	switch (hw) {
+	case 0 ... 15:
+		irq_set_percpu_devid(irq);
+		irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
+				    handle_percpu_devid_fasteoi_ipi,
+				    NULL, NULL);
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		break;
+	case 16 ... 31:
 		irq_set_percpu_devid(irq);
 		irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
 				    handle_percpu_devid_irq, NULL, NULL);
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
-	} else {
+		break;
+	default:
 		irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
 				    handle_fasteoi_irq, NULL, NULL);
 		irq_set_probe(irq);
 		irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
+		break;
 	}
 	return 0;
 }
@@ -1020,15 +1049,19 @@ static int gic_irq_domain_translate(struct irq_domain *d,
 		if (fwspec->param_count < 3)
 			return -EINVAL;
 
-		/* Get the interrupt number and add 16 to skip over SGIs */
-		*hwirq = fwspec->param[1] + 16;
-
-		/*
-		 * For SPIs, we need to add 16 more to get the GIC irq
-		 * ID number
-		 */
-		if (!fwspec->param[0])
-			*hwirq += 16;
+		switch (fwspec->param[0]) {
+		case 0:			/* SPI */
+			*hwirq = fwspec->param[1] + 32;
+			break;
+		case 1:			/* PPI */
+			*hwirq = fwspec->param[1] + 16;
+			break;
+		case GIC_IRQ_TYPE_SGI:	/* SGI, can't be set via DT */
+			*hwirq = fwspec->param[1];
+			break;
+		default:
+			return -EINVAL;
+		}
 
 		*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
 
@@ -1097,8 +1130,10 @@ static void gic_init_chip(struct gic_chip_data *gic, struct device *dev,
 		gic->chip.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity;
 	}
 
-	if (gic == &gic_data[0])
+	if (gic == &gic_data[0]) {
 		gic->chip.irq_set_affinity = gic_set_affinity;
+		gic->chip.ipi_send_mask = gic_ipi_send_mask;
+	}
 }
 
 static int gic_init_bases(struct gic_chip_data *gic,
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19 16:17 [PATCH 00/11] arm/arm64: Turning IPIs into normal interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 01/11] genirq: Add fasteoi IPI flow Marc Zyngier
2020-05-19 19:47   ` Florian Fainelli
2020-06-12  9:54     ` Marc Zyngier
2020-05-19 22:25   ` Valentin Schneider
2020-05-19 22:29     ` Valentin Schneider
2020-06-12  9:58     ` Marc Zyngier
2020-05-19 16:17 ` [PATCH 02/11] genirq: Allow interrupts to be excluded from /proc/interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 03/11] arm64: Allow IPIs to be handled as normal interrupts Marc Zyngier
2020-05-21 14:03   ` Valentin Schneider
2020-05-19 16:17 ` [PATCH 04/11] ARM: " Marc Zyngier
2020-05-19 22:24   ` Russell King - ARM Linux admin
2020-05-21 14:03     ` Valentin Schneider
2020-05-21 15:12       ` Russell King - ARM Linux admin
2020-05-21 16:11         ` Valentin Schneider
2020-05-19 16:17 ` [PATCH 05/11] irqchip/gic-v3: Describe the SGI range Marc Zyngier
2020-05-19 16:17 ` [PATCH 06/11] irqchip/gic-v3: Configure SGIs as standard interrupts Marc Zyngier
2020-05-20  9:52   ` Sumit Garg
2020-05-20 10:24     ` Marc Zyngier
2020-05-21 14:04   ` Valentin Schneider
2020-06-12 10:39     ` Marc Zyngier
2020-05-19 16:17 ` [PATCH 07/11] irqchip/gic: Refactor SMP configuration Marc Zyngier
2020-05-19 16:17 ` Marc Zyngier [this message]
2021-04-20 20:37   ` [PATCH 08/11] irqchip/gic: Configure SGIs as standard interrupts dann frazier
2021-04-20 21:25     ` dann frazier
2021-04-21 10:58       ` Marc Zyngier
2021-04-21 14:52         ` dann frazier
2021-04-21 15:49           ` Marc Zyngier
2020-05-19 16:17 ` [PATCH 09/11] irqchip/gic-common: Don't enable SGIs by default Marc Zyngier
2020-05-19 16:17 ` [PATCH 10/11] irqchip/bcm2836: Configure mailbox interrupts as standard interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 11/11] arm64: Kill __smp_cross_call and co Marc Zyngier
2020-05-19 17:50 ` [PATCH 00/11] arm/arm64: Turning IPIs into normal interrupts Florian Fainelli
2020-05-19 19:47   ` Florian Fainelli
2020-06-12  9:49   ` Marc Zyngier
2020-06-12 16:57     ` Florian Fainelli
2020-05-19 22:25 ` Valentin Schneider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519161755.209565-9-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=kernel-team@android.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=sumit.garg@linaro.org \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git