* [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings @ 2020-07-05 18:17 ` Krzysztof Kozlowski 2020-07-06 6:08 ` Marek Szyprowski ` (2 more replies) 0 siblings, 3 replies; 4+ messages in thread From: Krzysztof Kozlowski @ 2020-07-05 18:17 UTC (permalink / raw) To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Cc: Sylwester Nawrocki, Chanwoo Choi, Pankaj Dubey, Alim Akhtar, Bartlomiej Zolnierkiewicz There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v2: 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested by Marek Changes since v1: 1. Remove the bus, as suggested by Marek --- arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- 6 files changed, 187 insertions(+), 226 deletions(-) diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 044e5da64a76..d3fb45a56527 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -418,33 +418,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index d2779a790ce3..a1e54449f33f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -669,45 +669,37 @@ status = "disabled"; }; - amba: amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma1: mdma@12850000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12850000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 02fde1a75ebd..99ce53b120ac 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -181,20 +181,6 @@ }; }; -&amba { - mdma0: mdma@12840000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12840000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - power-domains = <&pd_lcd0>; - }; -}; - &camera { status = "okay"; @@ -616,6 +602,20 @@ /delete-property/dma-names; }; +&soc { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &sysram { smp-sram@0 { status = "disabled"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b6135af7ef39..e3dbe4166836 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -679,56 +679,48 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; gsc_0: gsc@13e00000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 2eab80bf5f3a..abe75b9e39f5 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -189,34 +189,26 @@ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121a0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121a0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121b0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121b0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b672080e7469..c76460b70532 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -433,76 +433,68 @@ power-domains = <&mau_pd>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - adma: adma@3880000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x03880000 0x1000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_audss EXYNOS_ADMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; - power-domains = <&mau_pd>; - }; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + adma: adma@3880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + power-domains = <&mau_pd>; + }; - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in - * the kernel for boards that run in secure - * mode, we are getting imprecise external - * aborts causing the kernel to oops. - */ - status = "disabled"; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in + * the kernel for boards that run in secure + * mode, we are getting imprecise external + * aborts causing the kernel to oops. + */ + status = "disabled"; }; i2s0: i2s@3830000 { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings 2020-07-05 18:17 ` [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski @ 2020-07-06 6:08 ` Marek Szyprowski 2020-07-06 15:55 ` Alim Akhtar 2020-07-07 6:49 ` Krzysztof Kozlowski 2 siblings, 0 replies; 4+ messages in thread From: Marek Szyprowski @ 2020-07-06 6:08 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Cc: Sylwester Nawrocki, Chanwoo Choi, Pankaj Dubey, Alim Akhtar, Bartlomiej Zolnierkiewicz On 05.07.2020 20:17, Krzysztof Kozlowski wrote: > There is no need to keep DMA controller nodes under AMBA bus node. > Remove the "amba" node to fix dtschema warnings like: > > amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Works fine on all affected SoCs. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > > --- > > Changes since v2: > 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested by Marek > > Changes since v1: > 1. Remove the bus, as suggested by Marek > --- > arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- > arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- > .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- > arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- > arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- > arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- > 6 files changed, 187 insertions(+), 226 deletions(-) > > ... Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings 2020-07-05 18:17 ` [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski 2020-07-06 6:08 ` Marek Szyprowski @ 2020-07-06 15:55 ` Alim Akhtar 2020-07-07 6:49 ` Krzysztof Kozlowski 2 siblings, 0 replies; 4+ messages in thread From: Alim Akhtar @ 2020-07-06 15:55 UTC (permalink / raw) To: 'Krzysztof Kozlowski', 'Rob Herring', 'Kukjin Kim', devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Cc: 'Sylwester Nawrocki', 'Chanwoo Choi', 'Pankaj Dubey', 'Bartlomiej Zolnierkiewicz' Hi Krzysztof > -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: 05 July 2020 23:48 > To: Rob Herring <robh+dt@kernel.org>; Kukjin Kim <kgene@kernel.org>; > Krzysztof Kozlowski <krzk@kernel.org>; devicetree@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; linux- > kernel@vger.kernel.org > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>; Sylwester Nawrocki > <snawrocki@kernel.org>; Alim Akhtar <alim.akhtar@samsung.com>; Chanwoo > Choi <cw00.choi@samsung.com>; Pankaj Dubey > <pankaj.dubey@samsung.com> > Subject: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name > to fix dtschema warnings > > There is no need to keep DMA controller nodes under AMBA bus node. > Remove the "amba" node to fix dtschema warnings like: > > amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0- > 9a-f]+)?$' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > --- > > Changes since v2: > 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested > by Marek > > Changes since v1: > 1. Remove the bus, as suggested by Marek > --- > arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- > arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- > .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- > arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- > arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- > arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- > 6 files changed, 187 insertions(+), 226 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos3250.dtsi > b/arch/arm/boot/dts/exynos3250.dtsi > index 044e5da64a76..d3fb45a56527 100644 > --- a/arch/arm/boot/dts/exynos3250.dtsi > +++ b/arch/arm/boot/dts/exynos3250.dtsi > @@ -418,33 +418,26 @@ > status = "disabled"; > }; > > - amba { > - compatible = "simple-bus"; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges; > - > - pdma0: pdma@12680000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12680000 0x1000>; > - interrupts = <GIC_SPI 138 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cmu CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - pdma1: pdma@12690000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12690000 0x1000>; > - interrupts = <GIC_SPI 139 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cmu CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > + pdma0: pdma@12680000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12680000 0x1000>; > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@12690000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12690000 0x1000>; > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > }; > > adc: adc@126c0000 { > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi > index d2779a790ce3..a1e54449f33f 100644 > --- a/arch/arm/boot/dts/exynos4.dtsi > +++ b/arch/arm/boot/dts/exynos4.dtsi > @@ -669,45 +669,37 @@ > status = "disabled"; > }; > > - amba: amba { > - #address-cells = <1>; > - #size-cells = <1>; > - compatible = "simple-bus"; > - interrupt-parent = <&gic>; > - ranges; > - > - pdma0: pdma@12680000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12680000 0x1000>; > - interrupts = <GIC_SPI 35 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - pdma1: pdma@12690000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12690000 0x1000>; > - interrupts = <GIC_SPI 36 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - mdma1: mdma@12850000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12850000 0x1000>; > - interrupts = <GIC_SPI 34 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - }; > + pdma0: pdma@12680000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12680000 0x1000>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@12690000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12690000 0x1000>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + mdma1: mdma@12850000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12850000 0x1000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > }; > > fimd: fimd@11c00000 { > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts > b/arch/arm/boot/dts/exynos4210-universal_c210.dts > index 02fde1a75ebd..99ce53b120ac 100644 > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > @@ -181,20 +181,6 @@ > }; > }; > > -&amba { > - mdma0: mdma@12840000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x12840000 0x1000>; > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - power-domains = <&pd_lcd0>; > - }; > -}; > - > &camera { > status = "okay"; > > @@ -616,6 +602,20 @@ > /delete-property/dma-names; > }; > > +&soc { > + mdma0: mdma@12840000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x12840000 0x1000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > + power-domains = <&pd_lcd0>; > + }; > +}; > + > &sysram { > smp-sram@0 { > status = "disabled"; > diff --git a/arch/arm/boot/dts/exynos5250.dtsi > b/arch/arm/boot/dts/exynos5250.dtsi > index b6135af7ef39..e3dbe4166836 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -679,56 +679,48 @@ > samsung,pmureg-phandle = > <&pmu_system_controller>; > }; > > - amba { > - #address-cells = <1>; > - #size-cells = <1>; > - compatible = "simple-bus"; > - interrupt-parent = <&gic>; > - ranges; > - > - pdma0: pdma@121a0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121A0000 0x1000>; > - interrupts = <GIC_SPI 34 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - pdma1: pdma@121b0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121B0000 0x1000>; > - interrupts = <GIC_SPI 35 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - mdma0: mdma@10800000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x10800000 0x1000>; > - interrupts = <GIC_SPI 33 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - }; > - > - mdma1: mdma@11c10000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x11C10000 0x1000>; > - interrupts = <GIC_SPI 124 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - }; > + pdma0: pdma@121a0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121A0000 0x1000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@121b0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121B0000 0x1000>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + mdma0: mdma@10800000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x10800000 0x1000>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > + }; > + > + mdma1: mdma@11c10000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11C10000 0x1000>; > + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > }; > > gsc_0: gsc@13e00000 { > diff --git a/arch/arm/boot/dts/exynos5410.dtsi > b/arch/arm/boot/dts/exynos5410.dtsi > index 2eab80bf5f3a..abe75b9e39f5 100644 > --- a/arch/arm/boot/dts/exynos5410.dtsi > +++ b/arch/arm/boot/dts/exynos5410.dtsi > @@ -189,34 +189,26 @@ > interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > }; > > - amba { > - #address-cells = <1>; > - #size-cells = <1>; > - compatible = "simple-bus"; > - interrupt-parent = <&gic>; > - ranges; > - > - pdma0: pdma@121a0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121a0000 0x1000>; > - interrupts = <GIC_SPI 34 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > + pdma0: pdma@121a0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121a0000 0x1000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > > - pdma1: pdma@121b0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121b0000 0x1000>; > - interrupts = <GIC_SPI 35 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > + pdma1: pdma@121b0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121b0000 0x1000>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > }; > > audi2s0: i2s@3830000 { > diff --git a/arch/arm/boot/dts/exynos5420.dtsi > b/arch/arm/boot/dts/exynos5420.dtsi > index b672080e7469..c76460b70532 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -433,76 +433,68 @@ > power-domains = <&mau_pd>; > }; > > - amba { > - #address-cells = <1>; > - #size-cells = <1>; > - compatible = "simple-bus"; > - interrupt-parent = <&gic>; > - ranges; > - > - adma: adma@3880000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x03880000 0x1000>; > - interrupts = <GIC_SPI 110 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock_audss EXYNOS_ADMA>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <6>; > - #dma-requests = <16>; > - power-domains = <&mau_pd>; > - }; > - > - pdma0: pdma@121a0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121A0000 0x1000>; > - interrupts = <GIC_SPI 34 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - pdma1: pdma@121b0000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x121B0000 0x1000>; > - interrupts = <GIC_SPI 35 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_PDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <32>; > - }; > - > - mdma0: mdma@10800000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x10800000 0x1000>; > - interrupts = <GIC_SPI 33 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA0>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - }; > + adma: adma@3880000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x03880000 0x1000>; > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock_audss EXYNOS_ADMA>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <6>; > + #dma-requests = <16>; > + power-domains = <&mau_pd>; > + }; > > - mdma1: mdma@11c10000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x11C10000 0x1000>; > - interrupts = <GIC_SPI 124 > IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clock CLK_MDMA1>; > - clock-names = "apb_pclk"; > - #dma-cells = <1>; > - #dma-channels = <8>; > - #dma-requests = <1>; > - /* > - * MDMA1 can support both secure and non- > secure > - * AXI transactions. When this is enabled in > - * the kernel for boards that run in secure > - * mode, we are getting imprecise external > - * aborts causing the kernel to oops. > - */ > - status = "disabled"; > - }; > + pdma0: pdma@121a0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121A0000 0x1000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@121b0000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x121B0000 0x1000>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + mdma0: mdma@10800000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x10800000 0x1000>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > + }; > + > + mdma1: mdma@11c10000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11C10000 0x1000>; > + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clock CLK_MDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <1>; > + /* > + * MDMA1 can support both secure and non-secure > + * AXI transactions. When this is enabled in > + * the kernel for boards that run in secure > + * mode, we are getting imprecise external > + * aborts causing the kernel to oops. > + */ > + status = "disabled"; > }; > > i2s0: i2s@3830000 { > -- > 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings 2020-07-05 18:17 ` [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski 2020-07-06 6:08 ` Marek Szyprowski 2020-07-06 15:55 ` Alim Akhtar @ 2020-07-07 6:49 ` Krzysztof Kozlowski 2 siblings, 0 replies; 4+ messages in thread From: Krzysztof Kozlowski @ 2020-07-07 6:49 UTC (permalink / raw) To: Rob Herring, Kukjin Kim, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Cc: Sylwester Nawrocki, Chanwoo Choi, Pankaj Dubey, Alim Akhtar, Bartlomiej Zolnierkiewicz On Sun, Jul 05, 2020 at 08:17:54PM +0200, Krzysztof Kozlowski wrote: > There is no need to keep DMA controller nodes under AMBA bus node. > Remove the "amba" node to fix dtschema warnings like: > > amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > --- > > Changes since v2: > 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested by Marek > > Changes since v1: > 1. Remove the bus, as suggested by Marek > --- > arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- > arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- > .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- > arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- > arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- > arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- Thanks for testing and reviews. Applied. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-07-07 6:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200705181810eucas1p1b310ef2f430a0d23602234928b79ba11@eucas1p1.samsung.com>
2020-07-05 18:17 ` [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski
2020-07-06 6:08 ` Marek Szyprowski
2020-07-06 15:55 ` Alim Akhtar
2020-07-07 6:49 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).