* [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver
@ 2020-08-10 6:51 Fengping Yu
2020-08-10 6:51 ` [PATCH v17 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m Fengping Yu
2020-08-13 0:55 ` [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Dmitry Torokhov
0 siblings, 2 replies; 4+ messages in thread
From: Fengping Yu @ 2020-08-10 6:51 UTC (permalink / raw)
To: Yingjoe Chen, Rob Herring, Andy Shevchenko, Dmitry Torokhov,
Marco Felsch
Cc: devicetree, linux-kernel, linux-mediatek, linux-input,
fengping.yu, linux-arm-kernel
From: "fengping.yu" <fengping.yu@mediatek.com>
This patch adds matrix keypad support for Mediatek SoCs.
Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
---
drivers/input/keyboard/Kconfig | 11 ++
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/mtk-kpd.c | 209 +++++++++++++++++++++++++++++++
3 files changed, 221 insertions(+)
create mode 100644 drivers/input/keyboard/mtk-kpd.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 793ecbbda32c..1ee845c292c6 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -782,6 +782,17 @@ config KEYBOARD_BCM
To compile this driver as a module, choose M here: the
module will be called bcm-keypad.
+config KEYBOARD_MTK_KPD
+ tristate "MediaTek Keypad Support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ select REGMAP_MMIO
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the keypad on MediaTek SoCs.
+ If unsure, say N.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-kpd.
+
config KEYBOARD_MTK_PMIC
tristate "MediaTek PMIC keys support"
depends on MFD_MT6397
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 1d689fdd5c00..6c9d852c377e 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_KPD) += mtk-kpd.o
obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
new file mode 100644
index 000000000000..451b3bc61c6f
--- /dev/null
+++ b/drivers/input/keyboard/mtk-kpd.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author Fengping Yu <fengping.yu@mediatek.com>
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MTK_KPD_NAME "mtk-kpd"
+#define MTK_KPD_MEM 0x0004
+#define MTK_KPD_DEBOUNCE 0x0018
+#define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0)
+#define MTK_KPD_DEBOUNCE_MAX_US 256000
+#define MTK_KPD_NUM_MEMS 5
+#define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */
+
+struct mtk_keypad {
+ struct regmap *regmap;
+ struct input_dev *input_dev;
+ struct clk *clk;
+ void __iomem *base;
+ u32 n_rows;
+ u32 n_cols;
+ DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
+};
+
+static const struct regmap_config keypad_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = sizeof(u32),
+ .max_register = 36,
+};
+
+static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
+{
+ struct mtk_keypad *keypad = dev_id;
+ unsigned short *keycode = keypad->input_dev->keycode;
+ DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
+ DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
+ int bit_nr;
+ int pressed;
+ unsigned short code;
+
+ regmap_bulk_read(keypad->regmap, MTK_KPD_MEM,
+ new_state, MTK_KPD_NUM_MEMS);
+
+ bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
+
+ for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
+ /* 1: not pressed, 0: pressed */
+ pressed = !test_bit(bit_nr, new_state);
+ dev_dbg(&keypad->input_dev->dev, "%s",
+ pressed ? "pressed" : "released");
+
+ /* 32bit register only use low 16bit as keypad mem register */
+ code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
+
+ input_report_key(keypad->input_dev, code, pressed);
+ input_sync(keypad->input_dev);
+
+ dev_dbg(&keypad->input_dev->dev,
+ "report Linux keycode = %d\n", code);
+ }
+
+ bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
+
+ return IRQ_HANDLED;
+}
+
+static void kpd_clk_disable(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static int kpd_pdrv_probe(struct platform_device *pdev)
+{
+ struct mtk_keypad *keypad;
+ unsigned int irq;
+ u32 debounce;
+ bool wakeup;
+ int ret;
+
+ keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
+ if (!keypad)
+ return -ENOMEM;
+
+ keypad->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(keypad->base))
+ return PTR_ERR(keypad->base);
+
+ keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
+ keypad->base,
+ &keypad_regmap_cfg);
+ if (IS_ERR(keypad->regmap)) {
+ dev_err(&pdev->dev,
+ "regmap init failed:%pe\n", keypad->regmap);
+ return PTR_ERR(keypad->regmap);
+ }
+
+ bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
+
+ keypad->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!keypad->input_dev) {
+ dev_err(&pdev->dev, "Failed to allocate input dev\n");
+ return -ENOMEM;
+ }
+
+ keypad->input_dev->name = MTK_KPD_NAME;
+ keypad->input_dev->id.bustype = BUS_HOST;
+
+ ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
+ &keypad->n_cols);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to parse keypad params\n");
+ return ret;
+ }
+
+ if (device_property_read_u32(&pdev->dev, "mediatek,debounce-us",
+ &debounce))
+ debounce = 16000;
+
+ if (debounce > MTK_KPD_DEBOUNCE_MAX_US) {
+ dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time %dus\n",
+ MTK_KPD_DEBOUNCE_MAX_US);
+ return -EINVAL;
+ }
+
+ wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
+
+ dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
+ keypad->n_rows, keypad->n_cols, debounce);
+
+ ret = matrix_keypad_build_keymap(NULL, NULL,
+ keypad->n_rows,
+ keypad->n_cols,
+ NULL,
+ keypad->input_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to build keymap\n");
+ return ret;
+ }
+
+ regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE,
+ debounce * 32 / 1000 & MTK_KPD_DEBOUNCE_MASK);
+
+ keypad->clk = devm_clk_get(&pdev->dev, "kpd");
+ if (IS_ERR(keypad->clk))
+ return PTR_ERR(keypad->clk);
+
+ ret = clk_prepare_enable(keypad->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&pdev->dev, kpd_clk_disable, keypad->clk);
+ if (ret)
+ return ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, kpd_irq_handler, IRQF_ONESHOT,
+ MTK_KPD_NAME, keypad);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
+ irq, ret);
+ return ret;
+ }
+
+ ret = input_register_device(keypad->input_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register device\n");
+ return ret;
+ }
+
+ ret = device_init_wakeup(&pdev->dev, wakeup);
+ if (ret)
+ dev_warn(&pdev->dev, "device_init_wakeup fail\n");
+
+ return 0;
+}
+
+static const struct of_device_id kpd_of_match[] = {
+ { .compatible = "mediatek,mt6779-keypad" },
+ { .compatible = "mediatek,mt6873-keypad" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver kpd_pdrv = {
+ .probe = kpd_pdrv_probe,
+ .driver = {
+ .name = MTK_KPD_NAME,
+ .of_match_table = kpd_of_match,
+ },
+};
+module_platform_driver(kpd_pdrv);
+
+MODULE_AUTHOR("Mediatek Corporation");
+MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
+MODULE_LICENSE("GPL");
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v17 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m
2020-08-10 6:51 [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Fengping Yu
@ 2020-08-10 6:51 ` Fengping Yu
2020-08-13 0:55 ` [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Dmitry Torokhov
1 sibling, 0 replies; 4+ messages in thread
From: Fengping Yu @ 2020-08-10 6:51 UTC (permalink / raw)
To: Yingjoe Chen, Rob Herring, Andy Shevchenko, Dmitry Torokhov,
Marco Felsch
Cc: devicetree, linux-kernel, linux-mediatek, linux-input,
fengping.yu, linux-arm-kernel
From: "fengping.yu" <fengping.yu@mediatek.com>
Add Mediatek matrix keypad support in defconfig.
Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 883e8bace3ed..d96e7576f0e1 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -354,6 +354,7 @@ CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_SNVS_PWRKEY=m
CONFIG_KEYBOARD_IMX_SC_KEY=m
CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_MTK_KPD=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_INPUT_MISC=y
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver
2020-08-10 6:51 [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Fengping Yu
2020-08-10 6:51 ` [PATCH v17 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m Fengping Yu
@ 2020-08-13 0:55 ` Dmitry Torokhov
2020-08-13 10:00 ` Andy Shevchenko
1 sibling, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2020-08-13 0:55 UTC (permalink / raw)
To: Fengping Yu
Cc: devicetree, Marco Felsch, linux-kernel, Rob Herring,
linux-mediatek, linux-input, Yingjoe Chen, Andy Shevchenko,
linux-arm-kernel
On Mon, Aug 10, 2020 at 02:51:28PM +0800, Fengping Yu wrote:
> From: "fengping.yu" <fengping.yu@mediatek.com>
>
> This patch adds matrix keypad support for Mediatek SoCs.
>
> Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> drivers/input/keyboard/Kconfig | 11 ++
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 209 +++++++++++++++++++++++++++++++
> 3 files changed, 221 insertions(+)
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 793ecbbda32c..1ee845c292c6 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -782,6 +782,17 @@ config KEYBOARD_BCM
> To compile this driver as a module, choose M here: the
> module will be called bcm-keypad.
>
> +config KEYBOARD_MTK_KPD
> + tristate "MediaTek Keypad Support"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + select REGMAP_MMIO
> + select INPUT_MATRIXKMAP
> + help
> + Say Y here if you want to use the keypad on MediaTek SoCs.
> + If unsure, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-kpd.
> +
> config KEYBOARD_MTK_PMIC
> tristate "MediaTek PMIC keys support"
> depends on MFD_MT6397
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 1d689fdd5c00..6c9d852c377e 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK_KPD) += mtk-kpd.o
> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..451b3bc61c6f
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Fengping Yu <fengping.yu@mediatek.com>
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/input/matrix_keypad.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define MTK_KPD_NAME "mtk-kpd"
> +#define MTK_KPD_MEM 0x0004
> +#define MTK_KPD_DEBOUNCE 0x0018
> +#define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0)
> +#define MTK_KPD_DEBOUNCE_MAX_US 256000
> +#define MTK_KPD_NUM_MEMS 5
> +#define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */
> +
> +struct mtk_keypad {
> + struct regmap *regmap;
> + struct input_dev *input_dev;
> + struct clk *clk;
> + void __iomem *base;
> + u32 n_rows;
> + u32 n_cols;
> + DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
> +};
> +
> +static const struct regmap_config keypad_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = sizeof(u32),
> + .max_register = 36,
> +};
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> + struct mtk_keypad *keypad = dev_id;
> + unsigned short *keycode = keypad->input_dev->keycode;
> + DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
> + DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
> + int bit_nr;
> + int pressed;
> + unsigned short code;
> +
> + regmap_bulk_read(keypad->regmap, MTK_KPD_MEM,
> + new_state, MTK_KPD_NUM_MEMS);
> +
> + bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> + for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
Should we be explicit:
if (bit_nr % 32 >= 16) // or "if ((bit_nr / 16) % 2)"
continue;
so that we sure we do not trip over garbage (if any) in the unused
bits?
> + /* 1: not pressed, 0: pressed */
> + pressed = !test_bit(bit_nr, new_state);
> + dev_dbg(&keypad->input_dev->dev, "%s",
> + pressed ? "pressed" : "released");
> +
> + /* 32bit register only use low 16bit as keypad mem register */
> + code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
This will give index of 16 for (0,0). Is this what we want? Hmm, this is
all weird... I think we need:
row = bit_nr / 32;
col = bit_nr % 32;
if (col > 15)
continue;
// set row_shift in probe() as:
// keypad_data->row_shift =
// get_count_order(keypad_data->n_cols);
code = keycode[MATRIX_SCAN_CODE(row, col,
keypad_data->row_shift)];
This will properly unpack the keymap built by
matrix_keypad_build_keymap().
> +
> + input_report_key(keypad->input_dev, code, pressed);
> + input_sync(keypad->input_dev);
> +
> + dev_dbg(&keypad->input_dev->dev,
> + "report Linux keycode = %d\n", code);
> + }
> +
> + bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void kpd_clk_disable(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad;
> + unsigned int irq;
> + u32 debounce;
> + bool wakeup;
> + int ret;
Can we call this variable "error" please?
> +
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + if (!keypad)
> + return -ENOMEM;
> +
> + keypad->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(keypad->base))
> + return PTR_ERR(keypad->base);
> +
> + keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
> + keypad->base,
> + &keypad_regmap_cfg);
> + if (IS_ERR(keypad->regmap)) {
> + dev_err(&pdev->dev,
> + "regmap init failed:%pe\n", keypad->regmap);
> + return PTR_ERR(keypad->regmap);
> + }
> +
> + bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!keypad->input_dev) {
> + dev_err(&pdev->dev, "Failed to allocate input dev\n");
> + return -ENOMEM;
> + }
> +
> + keypad->input_dev->name = MTK_KPD_NAME;
> + keypad->input_dev->id.bustype = BUS_HOST;
> +
> + ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
> + &keypad->n_cols);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to parse keypad params\n");
> + return ret;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "mediatek,debounce-us",
> + &debounce))
> + debounce = 16000;
> +
> + if (debounce > MTK_KPD_DEBOUNCE_MAX_US) {
> + dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time %dus\n",
> + MTK_KPD_DEBOUNCE_MAX_US);
> + return -EINVAL;
> + }
> +
> + wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
> +
> + dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
> + keypad->n_rows, keypad->n_cols, debounce);
> +
> + ret = matrix_keypad_build_keymap(NULL, NULL,
> + keypad->n_rows,
> + keypad->n_cols,
> + NULL,
> + keypad->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to build keymap\n");
> + return ret;
> + }
> +
> + regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE,
> + debounce * 32 / 1000 & MTK_KPD_DEBOUNCE_MASK);
> +
> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
> + if (IS_ERR(keypad->clk))
> + return PTR_ERR(keypad->clk);
> +
> + ret = clk_prepare_enable(keypad->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(&pdev->dev, kpd_clk_disable, keypad->clk);
> + if (ret)
> + return ret;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq,
> + NULL, kpd_irq_handler, IRQF_ONESHOT,
> + MTK_KPD_NAME, keypad);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
> + irq, ret);
> + return ret;
> + }
> +
> + ret = input_register_device(keypad->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register device\n");
> + return ret;
> + }
> +
> + ret = device_init_wakeup(&pdev->dev, wakeup);
> + if (ret)
> + dev_warn(&pdev->dev, "device_init_wakeup fail\n");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> + { .compatible = "mediatek,mt6779-keypad" },
> + { .compatible = "mediatek,mt6873-keypad" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver kpd_pdrv = {
> + .probe = kpd_pdrv_probe,
> + .driver = {
> + .name = MTK_KPD_NAME,
> + .of_match_table = kpd_of_match,
> + },
> +};
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.18.0
Thanks.
--
Dmitry
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver
2020-08-13 0:55 ` [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Dmitry Torokhov
@ 2020-08-13 10:00 ` Andy Shevchenko
0 siblings, 0 replies; 4+ messages in thread
From: Andy Shevchenko @ 2020-08-13 10:00 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: devicetree, Andy Shevchenko, Marco Felsch,
Linux Kernel Mailing List, Rob Herring,
moderated list:ARM/Mediatek SoC support, linux-input,
Yingjoe Chen, Fengping Yu, linux-arm Mailing List
On Thu, Aug 13, 2020 at 3:57 AM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> On Mon, Aug 10, 2020 at 02:51:28PM +0800, Fengping Yu wrote:
> > From: "fengping.yu" <fengping.yu@mediatek.com>
> >
> > This patch adds matrix keypad support for Mediatek SoCs.
...
> > +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> > +{
> > + struct mtk_keypad *keypad = dev_id;
> > + unsigned short *keycode = keypad->input_dev->keycode;
> > + DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
> > + DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
> > + int bit_nr;
> > + int pressed;
> > + unsigned short code;
> > +
> > + regmap_bulk_read(keypad->regmap, MTK_KPD_MEM,
> > + new_state, MTK_KPD_NUM_MEMS);
> > +
> > + bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
> > +
> > + for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
>
> Should we be explicit:
>
> if (bit_nr % 32 >= 16) // or "if ((bit_nr / 16) % 2)"
> continue;
>
> so that we sure we do not trip over garbage (if any) in the unused
> bits?
Shouldn't we rather rely on the fact that bitmap API explicitly takes
a bit number as an argument. What garbage are you thinking of?
If you are talking about gaps, then probably existing
for_each_set_clump8() or free size analogue (not yet in upstream,
though) should be used instead?
> > + /* 1: not pressed, 0: pressed */
> > + pressed = !test_bit(bit_nr, new_state);
> > + dev_dbg(&keypad->input_dev->dev, "%s",
> > + pressed ? "pressed" : "released");
> > +
> > + /* 32bit register only use low 16bit as keypad mem register */
> > + code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
>
> This will give index of 16 for (0,0).
I was also puzzled by this in one of the review rounds, but I don't
remember what was the explanation.
> Is this what we want? Hmm, this is
> all weird... I think we need:
>
> row = bit_nr / 32;
> col = bit_nr % 32;
> if (col > 15)
> continue;
>
> // set row_shift in probe() as:
> // keypad_data->row_shift =
> // get_count_order(keypad_data->n_cols);
> code = keycode[MATRIX_SCAN_CODE(row, col,
> keypad_data->row_shift)];
>
> This will properly unpack the keymap built by
> matrix_keypad_build_keymap().
>
> > +
> > + input_report_key(keypad->input_dev, code, pressed);
> > + input_sync(keypad->input_dev);
> > +
> > + dev_dbg(&keypad->input_dev->dev,
> > + "report Linux keycode = %d\n", code);
> > + }
> > +
> > + bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
> > +
> > + return IRQ_HANDLED;
> > +}
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-08-13 10:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-10 6:51 [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Fengping Yu
2020-08-10 6:51 ` [PATCH v17 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m Fengping Yu
2020-08-13 0:55 ` [PATCH v17 2/3] drivers: input: keyboard: Add mtk keypad driver Dmitry Torokhov
2020-08-13 10:00 ` Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).