[PATCH 01/16] iio: accel: bma180: Simplify with dev_err_probe()

[PATCH 01/16] iio: accel: bma180: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/accel/bma180.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 5b7a467c7b27..448faed001fd 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
 		return ret;
 
 	data->vdd_supply = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(data->vdd_supply)) {
-		if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vdd regulator %d\n",
-				(int)PTR_ERR(data->vdd_supply));
-		return PTR_ERR(data->vdd_supply);
-	}
+	if (IS_ERR(data->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
+				     "Failed to get vdd regulator\n");
+
 	data->vddio_supply = devm_regulator_get(dev, "vddio");
-	if (IS_ERR(data->vddio_supply)) {
-		if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vddio regulator %d\n",
-				(int)PTR_ERR(data->vddio_supply));
-		return PTR_ERR(data->vddio_supply);
-	}
+	if (IS_ERR(data->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
+				     "Failed to get vddio regulator\n");
+
 	/* Typical voltage 2.4V these are min and max */
 	ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
 	if (ret)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 02/16] iio: accel: mma8452: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/accel/mma8452.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 4e6e70250048..104b87b98455 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1538,22 +1538,14 @@ static int mma8452_probe(struct i2c_client *client,
 	data->chip_info = match->data;
 
 	data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
-	if (IS_ERR(data->vdd_reg)) {
-		if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_err(&client->dev, "failed to get VDD regulator!\n");
-		return PTR_ERR(data->vdd_reg);
-	}
+	if (IS_ERR(data->vdd_reg))
+		return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg),
+				     "failed to get VDD regulator!\n");
 
 	data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
-	if (IS_ERR(data->vddio_reg)) {
-		if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_err(&client->dev, "failed to get VDDIO regulator!\n");
-		return PTR_ERR(data->vddio_reg);
-	}
+	if (IS_ERR(data->vddio_reg))
+		return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg),
+				     "failed to get VDDIO regulator!\n");
 
 	ret = regulator_enable(data->vdd_reg);
 	if (ret) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 03/16] iio: adc: envelope-detector: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/envelope-detector.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/envelope-detector.c b/drivers/iio/adc/envelope-detector.c
index 2a4fd3bb64cf..d73eac36153f 100644
--- a/drivers/iio/adc/envelope-detector.c
+++ b/drivers/iio/adc/envelope-detector.c
@@ -348,11 +348,9 @@ static int envelope_detector_probe(struct platform_device *pdev)
 	indio_dev->num_channels = 1;
 
 	env->dac = devm_iio_channel_get(dev, "dac");
-	if (IS_ERR(env->dac)) {
-		if (PTR_ERR(env->dac) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get dac input channel\n");
-		return PTR_ERR(env->dac);
-	}
+	if (IS_ERR(env->dac))
+		return dev_err_probe(dev, PTR_ERR(env->dac),
+				     "failed to get dac input channel\n");
 
 	env->comp_irq = platform_get_irq_byname(pdev, "comp");
 	if (env->comp_irq < 0)
@@ -360,11 +358,9 @@ static int envelope_detector_probe(struct platform_device *pdev)
 
 	ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr,
 			       0, "envelope-detector", env);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to request interrupt\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to request interrupt\n");
+
 	env->comp_irq_trigger = irq_get_trigger_type(env->comp_irq);
 	if (env->comp_irq_trigger & IRQF_TRIGGER_RISING)
 		env->comp_irq_trigger_inv |= IRQF_TRIGGER_FALLING;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 04/16] iio: adc: exynos_adc: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/exynos_adc.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 7d23b6c33284..20477b249f2a 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -844,13 +844,9 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	}
 
 	info->vdd = devm_regulator_get(&pdev->dev, "vdd");
-	if (IS_ERR(info->vdd)) {
-		if (PTR_ERR(info->vdd) != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed getting regulator, err = %ld\n",
-				PTR_ERR(info->vdd));
-		return PTR_ERR(info->vdd);
-	}
+	if (IS_ERR(info->vdd))
+		return dev_err_probe(&pdev->dev, PTR_ERR(info->vdd),
+				     "failed getting regulator");
 
 	ret = regulator_enable(info->vdd);
 	if (ret)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 05/16] iio: adc: ltc2497: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/ltc2497-core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c
index 9b8fd9c32364..2a485c8a1940 100644
--- a/drivers/iio/adc/ltc2497-core.c
+++ b/drivers/iio/adc/ltc2497-core.c
@@ -180,13 +180,9 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
 		return ret;
 
 	ddata->ref = devm_regulator_get(dev, "vref");
-	if (IS_ERR(ddata->ref)) {
-		if (PTR_ERR(ddata->ref) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vref regulator: %pe\n",
-				ddata->ref);
-
-		return PTR_ERR(ddata->ref);
-	}
+	if (IS_ERR(ddata->ref))
+		return dev_err_probe(dev, PTR_ERR(ddata->ref),
+				     "Failed to get vref regulator\n");
 
 	ret = regulator_enable(ddata->ref);
 	if (ret < 0) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/16] iio: adc: meson_saradc: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/meson_saradc.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 93c2252c0b89..a9d06e8a576a 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -719,11 +719,8 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		if (ret == -ENODEV)
 			return 0;
 
-		if (ret != -EPROBE_DEFER)
-			dev_err(indio_dev->dev.parent,
-				"failed to get temperature_calib cell\n");
-
-		return ret;
+		return dev_err_probe(indio_dev->dev.parent, ret,
+				     "failed to get temperature_calib cell\n");
 	}
 
 	priv->tsc_regmap =
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/16] iio: adc: rcar-gyroadc: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/rcar-gyroadc.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index d2c1419e72a0..dcaefc108ff6 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -495,12 +495,9 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->regs);
 
 	priv->clk = devm_clk_get(dev, "fck");
-	if (IS_ERR(priv->clk)) {
-		ret = PTR_ERR(priv->clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get IF clock (ret=%i)\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "Failed to get IF clock\n");
 
 	ret = rcar_gyroadc_parse_subdevs(indio_dev);
 	if (ret)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/16] iio: adc: stm32: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/adc/stm32-adc-core.c  | 62 ++++++++++++-------------------
 drivers/iio/adc/stm32-adc.c       | 10 ++---
 drivers/iio/adc/stm32-dfsdm-adc.c | 10 ++---
 3 files changed, 30 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 0e2068ec068b..184d5491c7ed 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -582,11 +582,9 @@ static int stm32_adc_core_switches_probe(struct device *dev,
 	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
 	if (IS_ERR(priv->syscfg)) {
 		ret = PTR_ERR(priv->syscfg);
-		if (ret != -ENODEV) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Can't probe syscfg: %d\n", ret);
-			return ret;
-		}
+		if (ret != -ENODEV)
+			return dev_err_probe(dev, ret, "Can't probe syscfg\n");
+
 		priv->syscfg = NULL;
 	}
 
@@ -596,12 +594,9 @@ static int stm32_adc_core_switches_probe(struct device *dev,
 		priv->booster = devm_regulator_get_optional(dev, "booster");
 		if (IS_ERR(priv->booster)) {
 			ret = PTR_ERR(priv->booster);
-			if (ret != -ENODEV) {
-				if (ret != -EPROBE_DEFER)
-					dev_err(dev, "can't get booster %d\n",
-						ret);
-				return ret;
-			}
+			if (ret != -ENODEV)
+				dev_err_probe(dev, ret, "can't get booster\n");
+
 			priv->booster = NULL;
 		}
 	}
@@ -612,11 +607,10 @@ static int stm32_adc_core_switches_probe(struct device *dev,
 		priv->vdd = devm_regulator_get_optional(dev, "vdd");
 		if (IS_ERR(priv->vdd)) {
 			ret = PTR_ERR(priv->vdd);
-			if (ret != -ENODEV) {
-				if (ret != -EPROBE_DEFER)
-					dev_err(dev, "can't get vdd %d\n", ret);
-				return ret;
-			}
+			if (ret != -ENODEV)
+				return dev_err_probe(dev, ret,
+						     "can't get vdd\n");
+
 			priv->vdd = NULL;
 		}
 	}
@@ -669,40 +663,32 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	priv->common.phys_base = res->start;
 
 	priv->vdda = devm_regulator_get(&pdev->dev, "vdda");
-	if (IS_ERR(priv->vdda)) {
-		ret = PTR_ERR(priv->vdda);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "vdda get failed, %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->vdda))
+		return dev_err_probe(&pdev->dev, PTR_ERR(priv->vdda),
+				     "vdda get failed\n");
 
 	priv->vref = devm_regulator_get(&pdev->dev, "vref");
-	if (IS_ERR(priv->vref)) {
-		ret = PTR_ERR(priv->vref);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "vref get failed, %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->vref))
+		return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
+				     "vref get failed\n");
 
 	priv->aclk = devm_clk_get(&pdev->dev, "adc");
 	if (IS_ERR(priv->aclk)) {
 		ret = PTR_ERR(priv->aclk);
-		if (ret != -ENOENT) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev, "Can't get 'adc' clock\n");
-			return ret;
-		}
+		if (ret != -ENOENT)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Can't get 'adc' clock\n");
+
 		priv->aclk = NULL;
 	}
 
 	priv->bclk = devm_clk_get(&pdev->dev, "bus");
 	if (IS_ERR(priv->bclk)) {
 		ret = PTR_ERR(priv->bclk);
-		if (ret != -ENOENT) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev, "Can't get 'bus' clock\n");
-			return ret;
-		}
+		if (ret != -ENOENT)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Can't get 'bus' clock\n");
+
 		priv->bclk = NULL;
 	}
 
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 3eb9ebe8372f..b3f31f147347 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1805,13 +1805,9 @@ static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev)
 	adc->dma_chan = dma_request_chan(dev, "rx");
 	if (IS_ERR(adc->dma_chan)) {
 		ret = PTR_ERR(adc->dma_chan);
-		if (ret != -ENODEV) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev,
-					"DMA channel request failed with %d\n",
-					ret);
-			return ret;
-		}
+		if (ret != -ENODEV)
+			return dev_err_probe(dev, ret,
+					     "DMA channel request failed with\n");
 
 		/* DMA is optional: fall back to IRQ mode */
 		adc->dma_chan = NULL;
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 5e10fb4f3704..c7e0109315f8 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -1473,13 +1473,9 @@ static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
 	/* Optionally request DMA */
 	ret = stm32_dfsdm_dma_request(dev, indio_dev);
 	if (ret) {
-		if (ret != -ENODEV) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev,
-					"DMA channel request failed with %d\n",
-					ret);
-			return ret;
-		}
+		if (ret != -ENODEV)
+			return dev_err_probe(dev, ret,
+					     "DMA channel request failed with\n");
 
 		dev_dbg(dev, "No DMA support\n");
 		return 0;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/16] iio: afe: iio-rescale: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/afe/iio-rescale.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 69c0f277ada0..e42ea2b1707d 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -276,11 +276,9 @@ static int rescale_probe(struct platform_device *pdev)
 	int ret;
 
 	source = devm_iio_channel_get(dev, NULL);
-	if (IS_ERR(source)) {
-		if (PTR_ERR(source) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get source channel\n");
-		return PTR_ERR(source);
-	}
+	if (IS_ERR(source))
+		return dev_err_probe(dev, PTR_ERR(source),
+				     "failed to get source channel\n");
 
 	sizeof_ext_info = iio_get_channel_ext_info_count(source);
 	if (sizeof_ext_info) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/16] iio: amplifiers: hmc425a: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/amplifiers/hmc425a.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c
index 582708924e4f..9efa692151f0 100644
--- a/drivers/iio/amplifiers/hmc425a.c
+++ b/drivers/iio/amplifiers/hmc425a.c
@@ -201,12 +201,9 @@ static int hmc425a_probe(struct platform_device *pdev)
 	st->gain = st->chip_info->default_gain;
 
 	st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW);
-	if (IS_ERR(st->gpios)) {
-		ret = PTR_ERR(st->gpios);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to get gpios\n");
-		return ret;
-	}
+	if (IS_ERR(st->gpios))
+		return dev_err_probe(&pdev->dev, PTR_ERR(st->gpios),
+				     "failed to get gpios\n");
 
 	if (st->gpios->ndescs != st->chip_info->num_gpios) {
 		dev_err(&pdev->dev, "%d GPIOs needed to operate\n",
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 11/16] iio: chemical: scd30: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/chemical/scd30_core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
index eac76972f83e..92358797796d 100644
--- a/drivers/iio/chemical/scd30_core.c
+++ b/drivers/iio/chemical/scd30_core.c
@@ -705,13 +705,9 @@ int scd30_probe(struct device *dev, int irq, const char *name, void *priv,
 	indio_dev->available_scan_masks = scd30_scan_masks;
 
 	state->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(state->vdd)) {
-		if (PTR_ERR(state->vdd) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_err(dev, "failed to get regulator\n");
-		return PTR_ERR(state->vdd);
-	}
+	if (IS_ERR(state->vdd))
+		return dev_err_probe(dev, PTR_ERR(state->vdd),
+				     "failed to get regulator\n");
 
 	ret = regulator_enable(state->vdd);
 	if (ret)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 12/16] iio: dac: dpot-dac: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/dac/dpot-dac.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/dac/dpot-dac.c b/drivers/iio/dac/dpot-dac.c
index be61c3b01e8b..2258535b8a42 100644
--- a/drivers/iio/dac/dpot-dac.c
+++ b/drivers/iio/dac/dpot-dac.c
@@ -183,18 +183,14 @@ static int dpot_dac_probe(struct platform_device *pdev)
 	indio_dev->num_channels = 1;
 
 	dac->vref = devm_regulator_get(dev, "vref");
-	if (IS_ERR(dac->vref)) {
-		if (PTR_ERR(dac->vref) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to get vref regulator\n");
-		return PTR_ERR(dac->vref);
-	}
+	if (IS_ERR(dac->vref))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dac->vref),
+				     "failed to get vref regulator\n");
 
 	dac->dpot = devm_iio_channel_get(dev, "dpot");
-	if (IS_ERR(dac->dpot)) {
-		if (PTR_ERR(dac->dpot) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get dpot input channel\n");
-		return PTR_ERR(dac->dpot);
-	}
+	if (IS_ERR(dac->dpot))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dac->dpot),
+				     "failed to get dpot input channel\n");
 
 	ret = iio_get_channel_type(dac->dpot, &type);
 	if (ret < 0)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 13/16] iio: imu: inv_mpu6050: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 3fee3947f772..18a1898e3e34 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1475,22 +1475,14 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	}
 
 	st->vdd_supply = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(st->vdd_supply)) {
-		if (PTR_ERR(st->vdd_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vdd regulator %d\n",
-				(int)PTR_ERR(st->vdd_supply));
-
-		return PTR_ERR(st->vdd_supply);
-	}
+	if (IS_ERR(st->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(st->vdd_supply),
+				     "Failed to get vdd regulator\n");
 
 	st->vddio_supply = devm_regulator_get(dev, "vddio");
-	if (IS_ERR(st->vddio_supply)) {
-		if (PTR_ERR(st->vddio_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vddio regulator %d\n",
-				(int)PTR_ERR(st->vddio_supply));
-
-		return PTR_ERR(st->vddio_supply);
-	}
+	if (IS_ERR(st->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(st->vddio_supply),
+				     "Failed to get vddio regulator\n");
 
 	result = regulator_enable(st->vdd_supply);
 	if (result) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 14/16] iio: light: isl29018: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/light/isl29018.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index ac8ad0f32689..2689867467a8 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -746,12 +746,9 @@ static int isl29018_probe(struct i2c_client *client,
 	chip->suspended = false;
 
 	chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
-	if (IS_ERR(chip->vcc_reg)) {
-		err = PTR_ERR(chip->vcc_reg);
-		if (err != -EPROBE_DEFER)
-			dev_err(&client->dev, "failed to get VCC regulator!\n");
-		return err;
-	}
+	if (IS_ERR(chip->vcc_reg))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->vcc_reg),
+				     "failed to get VCC regulator!\n");
 
 	err = regulator_enable(chip->vcc_reg);
 	if (err) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 15/16] iio: light: tsl2772: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/light/tsl2772.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index 735399405417..00073346ad1e 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -1776,14 +1776,9 @@ static int tsl2772_probe(struct i2c_client *clientp,
 	ret = devm_regulator_bulk_get(&clientp->dev,
 				      ARRAY_SIZE(chip->supplies),
 				      chip->supplies);
-	if (ret < 0) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(&clientp->dev,
-				"Failed to get regulators: %d\n",
-				ret);
-
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&clientp->dev, ret,
+				     "Failed to get regulators\n");
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies);
 	if (ret < 0) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 16/16] iio: magnetometer: ak8974: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/iio/magnetometer/ak8974.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
index cbb44e401c0a..fa6a8e1a815c 100644
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -843,15 +843,9 @@ static int ak8974_probe(struct i2c_client *i2c,
 	ret = devm_regulator_bulk_get(&i2c->dev,
 				      ARRAY_SIZE(ak8974->regs),
 				      ak8974->regs);
-	if (ret < 0) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(&i2c->dev, "cannot get regulators: %d\n", ret);
-		else
-			dev_dbg(&i2c->dev,
-				"regulators unavailable, deferring probe\n");
-
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&i2c->dev, ret,
+				     "cannot get regulators\n");
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
 	if (ret < 0) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/16] iio: chemical: scd30: Simplify with dev_err_probe()

[Tomasz Duszynski]

On Wed, Aug 26, 2020 at 04:51:48PM +0200, Krzysztof Kozlowski wrote:
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/iio/chemical/scd30_core.c | 10 +++-------
>  1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
> index eac76972f83e..92358797796d 100644
> --- a/drivers/iio/chemical/scd30_core.c
> +++ b/drivers/iio/chemical/scd30_core.c
> @@ -705,13 +705,9 @@ int scd30_probe(struct device *dev, int irq, const char *name, void *priv,
>  	indio_dev->available_scan_masks = scd30_scan_masks;
>
>  	state->vdd = devm_regulator_get(dev, "vdd");
> -	if (IS_ERR(state->vdd)) {
> -		if (PTR_ERR(state->vdd) == -EPROBE_DEFER)
> -			return -EPROBE_DEFER;
> -
> -		dev_err(dev, "failed to get regulator\n");
> -		return PTR_ERR(state->vdd);
> -	}
> +	if (IS_ERR(state->vdd))
> +		return dev_err_probe(dev, PTR_ERR(state->vdd),
> +				     "failed to get regulator\n");

I'd say that removing like break would slightly improve readability.
Besides, staying within 100 columns seems socially acceptable now.
Otherwise,

Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>

>
>  	ret = regulator_enable(state->vdd);
>  	if (ret)
> --
> 2.17.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/16] iio: chemical: scd30: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

On Wed, Aug 26, 2020 at 05:34:34PM +0200, Tomasz Duszynski wrote:
> On Wed, Aug 26, 2020 at 04:51:48PM +0200, Krzysztof Kozlowski wrote:
> > Common pattern of handling deferred probe can be simplified with
> > dev_err_probe().  Less code and also it prints the error value.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  drivers/iio/chemical/scd30_core.c | 10 +++-------
> >  1 file changed, 3 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
> > index eac76972f83e..92358797796d 100644
> > --- a/drivers/iio/chemical/scd30_core.c
> > +++ b/drivers/iio/chemical/scd30_core.c
> > @@ -705,13 +705,9 @@ int scd30_probe(struct device *dev, int irq, const char *name, void *priv,
> >  	indio_dev->available_scan_masks = scd30_scan_masks;
> >
> >  	state->vdd = devm_regulator_get(dev, "vdd");
> > -	if (IS_ERR(state->vdd)) {
> > -		if (PTR_ERR(state->vdd) == -EPROBE_DEFER)
> > -			return -EPROBE_DEFER;
> > -
> > -		dev_err(dev, "failed to get regulator\n");
> > -		return PTR_ERR(state->vdd);
> > -	}
> > +	if (IS_ERR(state->vdd))
> > +		return dev_err_probe(dev, PTR_ERR(state->vdd),
> > +				     "failed to get regulator\n");
> 
> I'd say that removing like break would slightly improve readability.
> Besides, staying within 100 columns seems socially acceptable now.
> Otherwise,
> 
> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>

Indeed. Although 80 is still mentioned as preferred (in commit bdc48fa11
and in coding style) but here having longer line would be better.

I guess this could be fixed up easily when applying but if resend is
wanted, let me know.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 08/16] iio: adc: stm32: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

On Wed, Aug 26, 2020 at 04:51:45PM +0200, Krzysztof Kozlowski wrote:
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/iio/adc/stm32-adc-core.c  | 62 ++++++++++++-------------------
>  drivers/iio/adc/stm32-adc.c       | 10 ++---
>  drivers/iio/adc/stm32-dfsdm-adc.c | 10 ++---
>  3 files changed, 30 insertions(+), 52 deletions(-)

For this one I have a follow up - I found more of places for conversion.
I will send v2 for this one only.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/16] iio: accel: bma180: Simplify with dev_err_probe()

[Jonathan Cameron]

On Wed, 26 Aug 2020 16:51:38 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:

> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Please make sure to send v2 to linux-iio@vger.kernel.org

> ---
>  drivers/iio/accel/bma180.c | 20 ++++++++------------
>  1 file changed, 8 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
> index 5b7a467c7b27..448faed001fd 100644
> --- a/drivers/iio/accel/bma180.c
> +++ b/drivers/iio/accel/bma180.c
> @@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
>  		return ret;
>  
>  	data->vdd_supply = devm_regulator_get(dev, "vdd");
> -	if (IS_ERR(data->vdd_supply)) {
> -		if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
> -			dev_err(dev, "Failed to get vdd regulator %d\n",
> -				(int)PTR_ERR(data->vdd_supply));
> -		return PTR_ERR(data->vdd_supply);
> -	}
> +	if (IS_ERR(data->vdd_supply))
> +		return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
> +				     "Failed to get vdd regulator\n");
> +
>  	data->vddio_supply = devm_regulator_get(dev, "vddio");
> -	if (IS_ERR(data->vddio_supply)) {
> -		if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
> -			dev_err(dev, "Failed to get vddio regulator %d\n",
> -				(int)PTR_ERR(data->vddio_supply));
> -		return PTR_ERR(data->vddio_supply);
> -	}
> +	if (IS_ERR(data->vddio_supply))
> +		return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
> +				     "Failed to get vddio regulator\n");
> +
>  	/* Typical voltage 2.4V these are min and max */
>  	ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
>  	if (ret)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/16] iio: accel: bma180: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

On Thu, Aug 27, 2020 at 12:26:05PM +0100, Jonathan Cameron wrote:
> On Wed, 26 Aug 2020 16:51:38 +0200
> Krzysztof Kozlowski <krzk@kernel.org> wrote:
> 
> > Common pattern of handling deferred probe can be simplified with
> > dev_err_probe().  Less code and also it prints the error value.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> Please make sure to send v2 to linux-iio@vger.kernel.org

Sure, my bad.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 16/16] iio: magnetometer: ak8974: Simplify with dev_err_probe()

[Linus Walleij]

On Wed, Aug 26, 2020 at 4:53 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:

> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel