From: Nishanth Menon <nm@ti.com>
To: Suman Anna <s-anna@ti.com>
Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com,
Vignesh Raghavendra <vigneshr@ti.com>,
lokeshvutla@ti.com, nsekhar@ti.com, linux-kernel@vger.kernel.org,
Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors
Date: Wed, 2 Sep 2020 13:16:13 -0500 [thread overview]
Message-ID: <20200902181613.mrffnxy4klc5l75d@akan> (raw)
In-Reply-To: <7fbf0ee5-0c7e-ae18-fa8a-bbdc6e9da926@ti.com>
On 11:54-20200902, Suman Anna wrote:
> On 9/1/20 5:30 PM, Nishanth Menon wrote:
> > Building with W=2 throws up a bunch of easy to fixup errors..
> > node_name_chars_strict is one of them.. Knock those out.
> >
> > Signed-off-by: Nishanth Menon <nm@ti.com>
> > ---
> > arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++---
> > arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
> > arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 16 ++++++++--------
> > .../dts/ti/k3-am654-industrial-thermal.dtsi | 12 ++++++------
> > .../boot/dts/ti/k3-j721e-common-proc-board.dts | 18 +++++++++---------
> > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++---
> > .../arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +-
> > arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
> > 8 files changed, 33 insertions(+), 33 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> > index 9c96e3f58c86..ff3e38408dbc 100644
> > --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> > @@ -305,7 +305,7 @@
> > no-1-8-v;
> > };
> >
> > - scm_conf: scm_conf@100000 {
> > + scm_conf: scm-conf@100000 {
> > compatible = "syscon", "simple-mfd";
> > reg = <0 0x00100000 0 0x1c000>;
> > #address-cells = <1>;
> > @@ -344,7 +344,7 @@
> > <0x4090 0x3>; /* SERDES1 lane select */
> > };
> >
> > - dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
> > + dss_oldi_io_ctrl: dss-oldi-io-ctrl@41E0 {
> > compatible = "syscon";
> > reg = <0x0000041E0 0x14>;
>
> We should %s/41E0/41e0/, but that change is not directly associated with the
> patch subject line. Perhaps, an additional patch? Remember seeing similar
> warning on some downstream crypto nodes, but strangely I am not seeing on these
> upstream nodes.
yeah - probably a separate patch, but thanks, i can fix it as well(will
check if there are similar ones around as well).
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-02 18:17 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon
2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-02 4:13 ` Suman Anna
2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon
2020-09-02 17:45 ` Suman Anna
2020-09-02 18:21 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-02 16:55 ` Suman Anna
2020-09-02 18:14 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon
2020-09-02 16:51 ` Suman Anna
2020-09-02 18:18 ` Nishanth Menon
2020-09-03 5:25 ` Vignesh Raghavendra
2020-09-03 11:23 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon
2020-09-02 16:54 ` Suman Anna
2020-09-02 18:16 ` Nishanth Menon [this message]
2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon
2020-09-07 11:54 ` Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon
2020-09-03 13:23 ` Suman Anna
2020-09-03 14:01 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon
2020-09-03 13:24 ` Suman Anna
2020-09-03 14:02 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon
2020-09-03 13:21 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-03 13:20 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200902181613.mrffnxy4klc5l75d@akan \
--to=nm@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).