[PATCH AUTOSEL 5.9 011/111] media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

[PATCH AUTOSEL 5.9 011/111] media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-isp.c  | 4 +++-
 drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index cde0d254ec1c4..a77c49b185115 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -305,8 +305,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 
 	if (on) {
 		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put(&is->pdev->dev);
 			return ret;
+		}
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 9c666f663ab43..fdd0d369b1925 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -471,7 +471,7 @@ static int fimc_lite_open(struct file *file)
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
 	ret = pm_runtime_get_sync(&fimc->pdev->dev);
 	if (ret < 0)
-		goto unlock;
+		goto err_pm;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.9 012/111] media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 16dd660137a8d..0bc8c23112db4 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -484,8 +484,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 		return -ENXIO;
 
 	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put(fmd->pmf);
 		return ret;
+	}
 
 	fmd->num_sensors = 0;
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.9 013/111] media: exynos4-is: Fix a reference count leak

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/mipi-csis.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 540151bbf58f2..1aac167abb175 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -510,8 +510,10 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (enable) {
 		s5pcsis_clear_counters(state);
 		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1)
+		if (ret && ret != 1) {
+			pm_runtime_put_noidle(&state->pdev->dev);
 			return ret;
+		}
 	}
 
 	mutex_lock(&state->lock);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.9 055/111] mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 38b04398c532e9bb9aa90fc07846ad0b0845fe94 ]

Fixes a race condition where multiple tx cleanup or sta poll tasks could run
in parallel.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/dma.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
index a8832c5e60041..8a1ae08d9572e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
@@ -95,16 +95,13 @@ static int mt7915_poll_tx(struct napi_struct *napi, int budget)
 	dev = container_of(napi, struct mt7915_dev, mt76.tx_napi);
 
 	mt7915_tx_cleanup(dev);
-
-	if (napi_complete_done(napi, 0))
-		mt7915_irq_enable(dev, MT_INT_TX_DONE_ALL);
-
-	mt7915_tx_cleanup(dev);
-
 	mt7915_mac_sta_poll(dev);
 
 	tasklet_schedule(&dev->mt76.tx_tasklet);
 
+	if (napi_complete_done(napi, 0))
+		mt7915_irq_enable(dev, MT_INT_TX_DONE_ALL);
+
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.9 074/111] drm/xlnx: Use devm_drm_dev_alloc

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 075342ea3d93044d68f821cf91c1a1a7d2fa569e ]

Gets rid of drmm_add_final_kfree, which I want to unexport so that it
stops confusion people about this transitional state of rolling drm
managed memory out.

This also fixes the missing drm_dev_put in the error path of the probe
code.

v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
other paths leaked on error, this should have been in
zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
devm_drm_dev_alloc.

Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200907082225.150837-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
index 26328c76305be..8e69303aad3f7 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
@@ -111,7 +111,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 	/* Initialize mode config, vblank and the KMS poll helper. */
 	ret = drmm_mode_config_init(drm);
 	if (ret < 0)
-		goto err_dev_put;
+		return ret;
 
 	drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs;
 	drm->mode_config.min_width = 0;
@@ -121,7 +121,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 
 	ret = drm_vblank_init(drm, 1);
 	if (ret)
-		goto err_dev_put;
+		return ret;
 
 	drm->irq_enabled = 1;
 
@@ -154,8 +154,6 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 
 err_poll_fini:
 	drm_kms_helper_poll_fini(drm);
-err_dev_put:
-	drm_dev_put(drm);
 	return ret;
 }
 
@@ -208,27 +206,16 @@ static int zynqmp_dpsub_probe(struct platform_device *pdev)
 	int ret;
 
 	/* Allocate private data. */
-	dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
-	if (!dpsub)
-		return -ENOMEM;
+	dpsub = devm_drm_dev_alloc(&pdev->dev, &zynqmp_dpsub_drm_driver,
+				   struct zynqmp_dpsub, drm);
+	if (IS_ERR(dpsub))
+		return PTR_ERR(dpsub);
 
 	dpsub->dev = &pdev->dev;
 	platform_set_drvdata(pdev, dpsub);
 
 	dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
 
-	/*
-	 * Initialize the DRM device early, as the DRM core mandates usage of
-	 * the managed memory helpers tied to the DRM device.
-	 */
-	ret = drm_dev_init(&dpsub->drm, &zynqmp_dpsub_drm_driver, &pdev->dev);
-	if (ret < 0) {
-		kfree(dpsub);
-		return ret;
-	}
-
-	drmm_add_final_kfree(&dpsub->drm, dpsub);
-
 	/* Try the reserved memory. Proceed if there's none. */
 	of_reserved_mem_device_init(&pdev->dev);
 
@@ -286,8 +273,6 @@ static int zynqmp_dpsub_remove(struct platform_device *pdev)
 	clk_disable_unprepare(dpsub->apb_clk);
 	of_reserved_mem_device_release(&pdev->dev);
 
-	drm_dev_put(drm);
-
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel