* [PATCH V2 2/5] soc: imx: gpcv2: add support for i.MX8MN power domains
2020-11-07 14:00 [PATCH V2 1/5] dt-bindings: add defines for i.MX8MN power domains Adam Ford
@ 2020-11-07 14:00 ` Adam Ford
2020-11-16 8:36 ` Shawn Guo
2020-11-07 14:00 ` [PATCH V2 3/5] arm64: dts: imx8mn: add GPC node and " Adam Ford
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Adam Ford @ 2020-11-07 14:00 UTC (permalink / raw)
To: linux-arm-kernel
Cc: devicetree, Fabio Estevam, Andrey Smirnov, Adam Ford,
Sascha Hauer, aford, krzk, linux-kernel, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo
This adds support for the power domains founds on i.MX8MN. The Nano
has fewer domains than the Mini, and the access to some of these domains
is different than that of the Mini, the Mini power domains cannot be
reused.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
V2: No change
drivers/soc/imx/gpcv2.c | 93 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 5642dd236c10..6b5b40a6fb3d 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -20,6 +20,7 @@
#include <dt-bindings/power/imx7-power.h>
#include <dt-bindings/power/imx8mq-power.h>
#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
#define GPC_LPCR_A_CORE_BSC 0x000
@@ -58,6 +59,12 @@
#define IMX8MM_PCIE_A53_DOMAIN BIT(3)
#define IMX8MM_MIPI_A53_DOMAIN BIT(2)
+#define IMX8MN_DISPMIX_A53_DOMAIN BIT(12)
+#define IMX8MN_GPUMIX_A53_DOMAIN BIT(9)
+#define IMX8MN_DDR1_A53_DOMAIN BIT(7)
+#define IMX8MN_OTG1_A53_DOMAIN BIT(4)
+#define IMX8MN_MIPI_A53_DOMAIN BIT(2)
+
#define GPC_PU_PGC_SW_PUP_REQ 0x0f8
#define GPC_PU_PGC_SW_PDN_REQ 0x104
@@ -94,6 +101,12 @@
#define IMX8MM_PCIE_SW_Pxx_REQ BIT(1)
#define IMX8MM_MIPI_SW_Pxx_REQ BIT(0)
+#define IMX8MN_DISPMIX_SW_Pxx_REQ BIT(10)
+#define IMX8MN_GPUMIX_SW_Pxx_REQ BIT(7)
+#define IMX8MN_DDR1_SW_Pxx_REQ BIT(5)
+#define IMX8MN_OTG1_SW_Pxx_REQ BIT(2)
+#define IMX8MN_MIPI_SW_Pxx_REQ BIT(0)
+
#define GPC_M4_PU_PDN_FLG 0x1bc
#define GPC_PU_PWRHSK 0x1fc
@@ -116,6 +129,14 @@
#define IMX8MM_VPUMIX_HSK_PWRDNREQN BIT(8)
#define IMX8MM_DISPMIX_HSK_PWRDNREQN BIT(7)
#define IMX8MM_HSIO_HSK_PWRDNREQN (BIT(5) | BIT(6))
+
+#define IMX8MN_GPUMIX_HSK_PWRDNACKN (BIT(29) | BIT(27))
+#define IMX8MN_DISPMIX_HSK_PWRDNACKN BIT(25)
+#define IMX8MN_HSIO_HSK_PWRDNACKN BIT(23)
+#define IMX8MN_GPUMIX_HSK_PWRDNREQN (BIT(11) | BIT(9))
+#define IMX8MN_DISPMIX_HSK_PWRDNREQN BIT(7)
+#define IMX8MN_HSIO_HSK_PWRDNREQN BIT(5)
+
/*
* The PGC offset values in Reference Manual
* (Rev. 1, 01/2018 and the older ones) GPC chapter's
@@ -152,6 +173,12 @@
#define IMX8MM_PGC_VPUG2 28
#define IMX8MM_PGC_VPUH1 29
+#define IMX8MN_PGC_MIPI 16
+#define IMX8MN_PGC_OTG1 18
+#define IMX8MN_PGC_DDR1 21
+#define IMX8MN_PGC_GPUMIX 23
+#define IMX8MN_PGC_DISPMIX 26
+
#define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40)
#define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc)
@@ -690,6 +717,71 @@ static const struct imx_pgc_domain_data imx8mm_pgc_domain_data = {
.reg_access_table = &imx8mm_access_table,
};
+static const struct imx_pgc_domain imx8mn_pgc_domains[] = {
+ [IMX8MN_POWER_DOMAIN_HSIOMIX] = {
+ .genpd = {
+ .name = "hsiomix",
+ },
+ .bits = {
+ .pxx = 0, /* no power sequence control */
+ .map = 0, /* no power sequence control */
+ .hskreq = IMX8MN_HSIO_HSK_PWRDNREQN,
+ .hskack = IMX8MN_HSIO_HSK_PWRDNACKN,
+ },
+ },
+
+ [IMX8MN_POWER_DOMAIN_OTG1] = {
+ .genpd = {
+ .name = "usb-otg1",
+ },
+ .bits = {
+ .pxx = IMX8MN_OTG1_SW_Pxx_REQ,
+ .map = IMX8MN_OTG1_A53_DOMAIN,
+ },
+ .pgc = IMX8MN_PGC_OTG1,
+ },
+
+ [IMX8MN_POWER_DOMAIN_GPUMIX] = {
+ .genpd = {
+ .name = "gpumix",
+ },
+ .bits = {
+ .pxx = IMX8MN_GPUMIX_SW_Pxx_REQ,
+ .map = IMX8MN_GPUMIX_A53_DOMAIN,
+ .hskreq = IMX8MN_GPUMIX_HSK_PWRDNREQN,
+ .hskack = IMX8MN_GPUMIX_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MN_PGC_GPUMIX,
+ },
+};
+
+static const struct regmap_range imx8mn_yes_ranges[] = {
+ regmap_reg_range(GPC_LPCR_A_CORE_BSC,
+ GPC_PU_PWRHSK),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_MIPI),
+ GPC_PGC_SR(IMX8MN_PGC_MIPI)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_OTG1),
+ GPC_PGC_SR(IMX8MN_PGC_OTG1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_DDR1),
+ GPC_PGC_SR(IMX8MN_PGC_DDR1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_GPUMIX),
+ GPC_PGC_SR(IMX8MN_PGC_GPUMIX)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_DISPMIX),
+ GPC_PGC_SR(IMX8MN_PGC_DISPMIX)),
+};
+
+static const struct regmap_access_table imx8mn_access_table = {
+ .yes_ranges = imx8mn_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(imx8mn_yes_ranges),
+};
+
+static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
+ .domains = imx8mn_pgc_domains,
+ .domains_num = ARRAY_SIZE(imx8mn_pgc_domains),
+ .reg_access_table = &imx8mn_access_table,
+};
+
+
static int imx_pgc_domain_probe(struct platform_device *pdev)
{
struct imx_pgc_domain *domain = pdev->dev.platform_data;
@@ -875,6 +967,7 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
static const struct of_device_id imx_gpcv2_dt_ids[] = {
{ .compatible = "fsl,imx7d-gpc", .data = &imx7_pgc_domain_data, },
{ .compatible = "fsl,imx8mm-gpc", .data = &imx8mm_pgc_domain_data, },
+ { .compatible = "fsl,imx8mn-gpc", .data = &imx8mn_pgc_domain_data, },
{ .compatible = "fsl,imx8mq-gpc", .data = &imx8m_pgc_domain_data, },
{ }
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V2 3/5] arm64: dts: imx8mn: add GPC node and power domains
2020-11-07 14:00 [PATCH V2 1/5] dt-bindings: add defines for i.MX8MN power domains Adam Ford
2020-11-07 14:00 ` [PATCH V2 2/5] soc: imx: gpcv2: add support " Adam Ford
@ 2020-11-07 14:00 ` Adam Ford
2020-11-08 18:45 ` Krzysztof Kozlowski
2020-11-07 14:00 ` [PATCH V2 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller Adam Ford
2020-11-07 14:00 ` [PATCH V2 5/5] arm64: dts: imx8mn: Add GPU node Adam Ford
3 siblings, 1 reply; 9+ messages in thread
From: Adam Ford @ 2020-11-07 14:00 UTC (permalink / raw)
To: linux-arm-kernel
Cc: devicetree, Fabio Estevam, Andrey Smirnov, Adam Ford,
Sascha Hauer, aford, krzk, linux-kernel, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo
This adds the DT nodes to describe the power domains available on the
i.MX8MN. There are more power domains, but the displaymix and mipi
power domains need a separate clock block controller which not yet
available, so this limits it to the HSIO, OTG and GPU domains.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: Fix missing includes
Remove interrupt controller flag
Remove domains which interact with blk-ctl
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 36 +++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ee1790230490..c37dee13057a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -598,6 +600,40 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mn-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MN_CLK_USB_BUS>;
+ };
+
+ pgc_otg1: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_AHB>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V2 5/5] arm64: dts: imx8mn: Add GPU node
2020-11-07 14:00 [PATCH V2 1/5] dt-bindings: add defines for i.MX8MN power domains Adam Ford
` (2 preceding siblings ...)
2020-11-07 14:00 ` [PATCH V2 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller Adam Ford
@ 2020-11-07 14:00 ` Adam Ford
2020-11-08 18:48 ` Krzysztof Kozlowski
3 siblings, 1 reply; 9+ messages in thread
From: Adam Ford @ 2020-11-07 14:00 UTC (permalink / raw)
To: linux-arm-kernel
Cc: devicetree, Fabio Estevam, Andrey Smirnov, Adam Ford,
Sascha Hauer, aford, krzk, linux-kernel, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Shawn Guo
According to the documentation from NXP, the i.MX8M Nano has a
Vivante GC7000 Ultra Lite as its GPU core.
With this patch, the Etnaviv driver presents the GPU as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
The stock operating voltage for the i.MX8M Nano is .85V which means
the GPU needs to run at 400MHz. For boards where the operating
voltage is higher, this can be increased.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: Move into this series
Update clocking description
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 5e4b6934de40..6e650ea422a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1008,6 +1008,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread