* [PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module
@ 2020-11-17 3:43 andy.tang
2020-11-17 3:43 ` [PATCH 2/2] ARM: dts: ls1021a: " andy.tang
2020-11-30 9:36 ` [PATCH 1/2] arm64: dts: freescale: " Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: andy.tang @ 2020-11-17 3:43 UTC (permalink / raw)
To: shawnguo
Cc: devicetree, Yuantian Tang, linux-kernel, leoyang.li, robh+dt,
linux-arm-kernel
From: Yuantian Tang <andy.tang@nxp.com>
Update the calibration table to make the temperature more accurate.
Three platforms have been updated: ls1012a, ls1043a and ls1046a.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 63 ++++++++-------
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 78 ++++++++++---------
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 72 +++++++++--------
3 files changed, 112 insertions(+), 101 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 5be686a0de54..b3683cda7f5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -293,43 +293,46 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
+ fsl,tmu-calibration = <0x00000000 0x00000025
+ 0x00000001 0x0000002c
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
+ 0x00000006 0x0000004c
+ 0x00000007 0x00000053
+ 0x00000008 0x00000059
+ 0x00000009 0x0000005f
+ 0x0000000a 0x00000066
+ 0x0000000b 0x0000006c
+
+ 0x00010000 0x00000026
+ 0x00010001 0x0000002d
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ 0x00010005 0x0000004d
+ 0x00010006 0x00000055
+ 0x00010007 0x0000005d
+ 0x00010008 0x00000065
+ 0x00010009 0x0000006d
+
+ 0x00020000 0x00000026
+ 0x00020001 0x00000030
+ 0x00020002 0x0000003a
+ 0x00020003 0x00000044
+ 0x00020004 0x0000004e
+ 0x00020005 0x00000059
+ 0x00020006 0x00000063
+
+ 0x00030000 0x00000014
+ 0x00030001 0x00000021
+ 0x00030002 0x0000002e
+ 0x00030003 0x0000003a
+ 0x00030004 0x00000047
+ 0x00030005 0x00000053
+ 0x00030006 0x00000060>;
big-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index d5d219311161..bbae4b353d3f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -403,43 +403,47 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+ fsl,tmu-calibration = <0x00000000 0x00000023
+ 0x00000001 0x0000002a
+ 0x00000002 0x00000031
+ 0x00000003 0x00000037
+ 0x00000004 0x0000003e
+ 0x00000005 0x00000044
+ 0x00000006 0x0000004b
+ 0x00000007 0x00000051
+ 0x00000008 0x00000058
+ 0x00000009 0x0000005e
+ 0x0000000a 0x00000065
+ 0x0000000b 0x0000006b
+
+ 0x00010000 0x00000023
+ 0x00010001 0x0000002b
+ 0x00010002 0x00000033
+ 0x00010003 0x0000003b
+ 0x00010004 0x00000043
+ 0x00010005 0x0000004b
+ 0x00010006 0x00000054
+ 0x00010007 0x0000005c
+ 0x00010008 0x00000064
+ 0x00010009 0x0000006c
+
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002c
+ 0x00020002 0x00000036
+ 0x00020003 0x00000040
+ 0x00020004 0x0000004b
+ 0x00020005 0x00000055
+ 0x00020006 0x0000005f
+
+ 0x00030000 0x00000013
+ 0x00030001 0x0000001d
+ 0x00030002 0x00000028
+ 0x00030003 0x00000032
+ 0x00030004 0x0000003d
+ 0x00030005 0x00000047
+ 0x00030006 0x00000052
+ 0x00030007 0x0000005c>;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 1fa39bacff4b..025e1f587662 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -400,45 +400,49 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
+ <0x00000000 0x00000023
+ 0x00000001 0x00000029
+ 0x00000002 0x0000002f
+ 0x00000003 0x00000036
+ 0x00000004 0x0000003c
+ 0x00000005 0x00000042
+ 0x00000006 0x00000049
+ 0x00000007 0x0000004f
+ 0x00000008 0x00000055
+ 0x00000009 0x0000005c
+ 0x0000000a 0x00000062
+ 0x0000000b 0x00000068
/* Calibration data group 2 */
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
+ 0x00010000 0x00000022
+ 0x00010001 0x0000002a
+ 0x00010002 0x00000032
+ 0x00010003 0x0000003a
+ 0x00010004 0x00000042
+ 0x00010005 0x0000004a
+ 0x00010006 0x00000052
+ 0x00010007 0x0000005a
+ 0x00010008 0x00000062
+ 0x00010009 0x0000006a
/* Calibration data group 3 */
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002b
+ 0x00020002 0x00000035
+ 0x00020003 0x0000003e
+ 0x00020004 0x00000048
+ 0x00020005 0x00000052
+ 0x00020006 0x0000005c
/* Calibration data group 4 */
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ 0x00030000 0x00000011
+ 0x00030001 0x0000001a
+ 0x00030002 0x00000024
+ 0x00030003 0x0000002e
+ 0x00030004 0x00000038
+ 0x00030005 0x00000042
+ 0x00030006 0x0000004c
+ 0x00030007 0x00000056>;
big-endian;
#thermal-sensor-cells = <1>;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: dts: ls1021a: update calibration table for TMU module
2020-11-17 3:43 [PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module andy.tang
@ 2020-11-17 3:43 ` andy.tang
2020-11-30 9:36 ` [PATCH 1/2] arm64: dts: freescale: " Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: andy.tang @ 2020-11-17 3:43 UTC (permalink / raw)
To: shawnguo
Cc: devicetree, Yuantian Tang, linux-kernel, leoyang.li, robh+dt,
linux-arm-kernel
From: Yuantian Tang <andy.tang@nxp.com>
Update the calibration table to make the temperature more accurate.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 77 ++++++++++++++++------------------
1 file changed, 37 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 827373ef1a54..0d569be0d2b2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -288,46 +288,43 @@
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
- fsl,tmu-calibration = <0x00000000 0x0000000f
- 0x00000001 0x00000017
- 0x00000002 0x0000001e
- 0x00000003 0x00000026
- 0x00000004 0x0000002e
- 0x00000005 0x00000035
- 0x00000006 0x0000003d
- 0x00000007 0x00000044
- 0x00000008 0x0000004c
- 0x00000009 0x00000053
- 0x0000000a 0x0000005b
- 0x0000000b 0x00000064
-
- 0x00010000 0x00000011
- 0x00010001 0x0000001c
- 0x00010002 0x00000024
- 0x00010003 0x0000002b
- 0x00010004 0x00000034
- 0x00010005 0x00000039
- 0x00010006 0x00000042
- 0x00010007 0x0000004c
- 0x00010008 0x00000051
- 0x00010009 0x0000005a
- 0x0001000a 0x00000063
-
- 0x00020000 0x00000013
- 0x00020001 0x00000019
- 0x00020002 0x00000024
- 0x00020003 0x0000002c
- 0x00020004 0x00000035
- 0x00020005 0x0000003d
- 0x00020006 0x00000046
- 0x00020007 0x00000050
- 0x00020008 0x00000059
-
- 0x00030000 0x00000002
- 0x00030001 0x0000000d
- 0x00030002 0x00000019
- 0x00030003 0x00000024>;
+ fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
+ fsl,tmu-calibration = <0x00000000 0x00000020
+ 0x00000001 0x00000024
+ 0x00000002 0x0000002a
+ 0x00000003 0x00000032
+ 0x00000004 0x00000038
+ 0x00000005 0x0000003e
+ 0x00000006 0x00000043
+ 0x00000007 0x0000004a
+ 0x00000008 0x00000050
+ 0x00000009 0x00000059
+ 0x0000000a 0x0000005f
+ 0x0000000b 0x00000066
+
+ 0x00010000 0x00000023
+ 0x00010001 0x0000002b
+ 0x00010002 0x00000033
+ 0x00010003 0x0000003a
+ 0x00010004 0x00000042
+ 0x00010005 0x0000004a
+ 0x00010006 0x00000054
+ 0x00010007 0x0000005c
+ 0x00010008 0x00000065
+ 0x00010009 0x0000006f
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000048
+ 0x00020004 0x00000054
+ 0x00020005 0x00000060
+ 0x00020006 0x0000006c
+
+ 0x00030000 0x00000025
+ 0x00030001 0x00000033
+ 0x00030002 0x00000043
+ 0x00030003 0x00000055>;
#thermal-sensor-cells = <1>;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module
2020-11-17 3:43 [PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module andy.tang
2020-11-17 3:43 ` [PATCH 2/2] ARM: dts: ls1021a: " andy.tang
@ 2020-11-30 9:36 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2020-11-30 9:36 UTC (permalink / raw)
To: andy.tang; +Cc: devicetree, robh+dt, linux-kernel, linux-arm-kernel, leoyang.li
On Tue, Nov 17, 2020 at 11:43:04AM +0800, andy.tang@nxp.com wrote:
> From: Yuantian Tang <andy.tang@nxp.com>
>
> Update the calibration table to make the temperature more accurate.
> Three platforms have been updated: ls1012a, ls1043a and ls1046a.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-30 9:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-17 3:43 [PATCH 1/2] arm64: dts: freescale: update calibration table for TMU module andy.tang
2020-11-17 3:43 ` [PATCH 2/2] ARM: dts: ls1021a: " andy.tang
2020-11-30 9:36 ` [PATCH 1/2] arm64: dts: freescale: " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).