Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	devicetree@vger.kernel.org
Cc: Jernej Skrabec <jernej.skrabec@siol.net>,
	Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime@cerno.tech>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/19] ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
Date: Thu, 14 Jan 2021 12:35:31 +0100
Message-ID: <20210114113538.1233933-12-maxime@cerno.tech> (raw)
In-Reply-To: <20210114113538.1233933-1-maxime@cerno.tech>

While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_id_det-gpios, a significant number of device tree use
usb0_id_det-gpio instead.

This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
index 24d507cdbcf9..052b010a5607 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
@@ -39,6 +39,6 @@ &usb_otg {
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-14 11:35 [PATCH 01/19] dt-bindings: sunxi: Fix the pinecube compatible Maxime Ripard
2021-01-14 11:35 ` [PATCH 02/19] dt-bindings: iio: adc: Add AXP803 compatible Maxime Ripard
2021-01-14 20:10   ` Jernej Škrabec
2021-01-17 12:41     ` Jonathan Cameron
2021-01-14 11:35 ` [PATCH 03/19] dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks Maxime Ripard
2021-01-14 20:11   ` Jernej Škrabec
2021-01-19 21:43   ` Alexandre Belloni
2021-01-14 11:35 ` [PATCH 04/19] dt-bindings: bridge: simple: Add corpro, gm7123 compatible Maxime Ripard
2021-01-14 20:14   ` Jernej Škrabec
2021-01-15  7:16   ` [PATCH 04/19] dt-bindings: bridge: simple: Add corpro,gm7123 compatible Laurent Pinchart
2021-01-18 10:03     ` Maxime Ripard
2021-01-18 10:22       ` [PATCH 04/19] dt-bindings: bridge: simple: Add corpro, gm7123 compatible Chen-Yu Tsai
2021-01-18 10:39         ` [PATCH 04/19] dt-bindings: bridge: simple: Add corpro,gm7123 compatible Laurent Pinchart
2021-01-18 10:38       ` Laurent Pinchart
2021-01-25 21:21   ` [PATCH 04/19] dt-bindings: bridge: simple: Add corpro, gm7123 compatible Rob Herring
2021-01-14 11:35 ` [PATCH 05/19] dt-bindings: bluetooth: realtek: Switch to unevaluatedProperties Maxime Ripard
2021-01-14 20:14   ` Jernej Škrabec
2021-01-14 22:54   ` Rob Herring
2021-01-15  1:37   ` Rob Herring
2021-01-18 10:15     ` Maxime Ripard
2021-01-22 14:40       ` Rob Herring
2021-01-14 11:35 ` [PATCH 06/19] ARM: dts: sunxi: Fix the LED node names Maxime Ripard
2021-01-14 20:33   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 07/19] ARM: dts: sunxi: Add missing backlight supply Maxime Ripard
2021-01-14 20:25   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 08/19] ARM: dts: sunxi: Fix CPU thermal zone node name Maxime Ripard
2021-01-14 20:34   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 09/19] ARM: dts: sunxi: Remove thermal zones without trip points Maxime Ripard
2021-01-14 20:36   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 10/19] ARM: dts: sun6i: primo81: Remove useless io-channel-cells Maxime Ripard
2021-01-14 20:37   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 11/19] ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array Maxime Ripard
2021-01-14 20:38   ` Jernej Škrabec
2021-01-14 11:35 ` Maxime Ripard [this message]
2021-01-14 20:39   ` [PATCH 12/19] ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties Jernej Škrabec
2021-01-14 11:35 ` [PATCH 13/19] ARM: dts: sun8i-s3: pinecube: Fix Display Engine DTC warnings Maxime Ripard
2021-01-14 20:40   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 14/19] ARM: dts: sun8i-a83t: Remove empty CSI port Maxime Ripard
2021-01-14 20:40   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 15/19] ARM: dts: sun8i-a33: sina33: Add missing panel power supply Maxime Ripard
2021-01-14 20:41   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 16/19] arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries Maxime Ripard
2021-01-14 20:42   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 17/19] arm64: dts: allwinner: pinephone: Remove useless light sensor supplies Maxime Ripard
2021-01-14 20:44   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 18/19] arm64: dts: allwinner: pinetab: Fix the panel compatible Maxime Ripard
2021-01-14 20:46   ` Jernej Škrabec
2021-01-14 11:35 ` [PATCH 19/19] arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs Maxime Ripard
2021-01-14 20:49   ` Jernej Škrabec
2021-01-14 20:07 ` [PATCH 01/19] dt-bindings: sunxi: Fix the pinecube compatible Jernej Škrabec
2021-01-15  2:41 ` Chen-Yu Tsai
2021-01-15  9:31   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210114113538.1233933-12-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git