[net-next PATCH v5 00/15] ACPI support for dpaa2 driver

[net-next PATCH v5 00/15] ACPI support for dpaa2 driver

[Calvin Johnson]

This patch set provides ACPI support to DPAA2 network drivers.

It also introduces new fwnode based APIs to support phylink and phy
layers
    Following functions are defined:
      phylink_fwnode_phy_connect()
      fwnode_mdiobus_register_phy()
      fwnode_mdiobus_register()
      fwnode_get_phy_id()
      fwnode_phy_find_device()
      device_phy_find_device()
      fwnode_get_phy_node()
      fwnode_mdio_find_device()
      acpi_get_local_address()

    First one helps in connecting phy to phylink instance.
    Next three helps in getting phy_id and registering phy to mdiobus
    Next two help in finding a phy on a mdiobus.
    Next one helps in getting phy_node from a fwnode.
    Last one is used to get local address from _ADR object.

    Corresponding OF functions are refactored.

Tested-on: T2080RDB, LS1046ARDB, LS2088ARDB and LX2160ARDB


Changes in v5:
- More cleanup
- Replace fwnode_get_id() with acpi_get_local_address()
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4:
- More cleanup
- Improve code structure to handle all cases
- Remove redundant else from fwnode_mdiobus_register()
- Cleanup xgmac_mdio_probe()
- call phy_device_free() before returning

Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions

Calvin Johnson (15):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: Introduce fwnode_mdio_find_device()
  net: phy: Introduce phy related fwnode functions
  of: mdio: Refactor of_phy_find_device()
  net: phy: Introduce fwnode_get_phy_id()
  of: mdio: Refactor of_get_phy_id()
  net: mdiobus: Introduce fwnode_mdiobus_register_phy()
  of: mdio: Refactor of_mdiobus_register_phy()
  ACPI: utils: Introduce acpi_get_local_address()
  net: mdio: Add ACPI support code for mdio
  net: mdiobus: Introduce fwnode_mdiobus_register()
  net/fsl: Use fwnode_mdiobus_register()
  phylink: introduce phylink_fwnode_phy_connect()
  net: phylink: Refactor phylink_of_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 drivers/acpi/utils.c                          |  14 ++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  91 +++++++-----
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  11 +-
 drivers/net/mdio/Kconfig                      |   7 +
 drivers/net/mdio/Makefile                     |   1 +
 drivers/net/mdio/acpi_mdio.c                  |  51 +++++++
 drivers/net/mdio/of_mdio.c                    |  79 +----------
 drivers/net/phy/mdio_bus.c                    |  86 +++++++++++
 drivers/net/phy/phy_device.c                  | 106 ++++++++++++++
 drivers/net/phy/phylink.c                     |  53 ++++---
 include/linux/acpi.h                          |   7 +
 include/linux/acpi_mdio.h                     |  27 ++++
 include/linux/mdio.h                          |   2 +
 include/linux/of_mdio.h                       |   6 +-
 include/linux/phy.h                           |  32 +++++
 include/linux/phylink.h                       |   3 +
 18 files changed, 578 insertions(+), 132 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 include/linux/acpi_mdio.h

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY

[Calvin Johnson]

Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.

Describe properties "phy-handle" and "phy-mode".

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5:
- More cleanup

Changes in v4:
- More cleanup

Changes in v3: None
Changes in v2:
- Updated with more description in document

 Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..e1e99cae5eb2
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+      Scope(\_SB.MDI0)
+      {
+        Device(PHY1) {
+          Name (_ADR, 0x1)
+        } // end of PHY1
+
+        Device(PHY2) {
+          Name (_ADR, 0x2)
+        } // end of PHY2
+      }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver need
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+	Scope(_SB)
+	{
+	  Device(MDI0) {
+	    Name(_HID, "NXP0006")
+	    Name(_CCA, 1)
+	    Name(_UID, 0)
+	    Name(_CRS, ResourceTemplate() {
+	      Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+	      Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+	       {
+		 MDI0_IT
+	       }
+	    }) // end of _CRS for MDI0
+	  } // end of MDI0
+	}
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+	Scope(\_SB.MDI0)
+	{
+	  Device(PHY1) {
+	    Name (_ADR, 0x1)
+	  } // end of PHY1
+
+	  Device(PHY2) {
+	    Name (_ADR, 0x2)
+	  } // end of PHY2
+	}
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+	Scope(\_SB.MCE0.PR17)
+	{
+	  Name (_DSD, Package () {
+	     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		 Package () {
+		     Package (2) {"phy-mode", "rgmii-id"},
+		     Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+	      }
+	   })
+	}
+
+	Scope(\_SB.MCE0.PR18)
+	{
+	  Name (_DSD, Package () {
+	    ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package (2) {"phy-mode", "rgmii-id"},
+		    Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+	    }
+	  })
+	}
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY

[Randy Dunlap]

Hi,
Just a couple of nits below:

On 2/8/21 7:12 AM, Calvin Johnson wrote:
> Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
> provide them to be connected to MAC.
> 
> Describe properties "phy-handle" and "phy-mode".
> 
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> ---

>  Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
> 
> diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
> new file mode 100644
> index 000000000000..e1e99cae5eb2
> --- /dev/null
> +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
> @@ -0,0 +1,133 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=========================
> +MDIO bus and PHYs in ACPI
> +=========================
> +
> +The PHYs on an MDIO bus [1] are probed and registered using
> +fwnode_mdiobus_register_phy().
> +
> +Later, for connecting these PHYs to MAC, the PHYs registered on the

                                    to a MAC,

> +MDIO bus have to be referenced.
> +
> +This document introduces two _DSD properties that are to be used
> +for connecting PHYs on the MDIO bus [3] to the MAC layer.
> +
> +These properties are defined in accordance with the "Device
> +Properties UUID For _DSD" [2] document and the
> +daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
> +Data Descriptors containing them.
> +
> +phy-handle
> +----------

...

> +
> +Later, during the MAC driver initialization, the registered PHY devices
> +have to be retrieved from the MDIO bus. For this, the MAC driver need

                                                                    needs

> +references to the previously registered PHYs which are provided
> +as device object references (e.g. \_SB.MDI0.PHY1).


thanks.
-- 
~Randy


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY

[Calvin Johnson]

On Mon, Feb 08, 2021 at 12:01:57PM -0800, Randy Dunlap wrote:
> Hi,
> Just a couple of nits below:
> 
> On 2/8/21 7:12 AM, Calvin Johnson wrote:
> > Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
> > provide them to be connected to MAC.
> > 
> > Describe properties "phy-handle" and "phy-mode".
> > 
> > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> > ---
> 
> >  Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
> >  1 file changed, 133 insertions(+)
> >  create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
> > 
> > diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > new file mode 100644
> > index 000000000000..e1e99cae5eb2
> > --- /dev/null
> > +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > @@ -0,0 +1,133 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +=========================
> > +MDIO bus and PHYs in ACPI
> > +=========================
> > +
> > +The PHYs on an MDIO bus [1] are probed and registered using
> > +fwnode_mdiobus_register_phy().
> > +
> > +Later, for connecting these PHYs to MAC, the PHYs registered on the
> 
>                                     to a MAC,
Each PHY is connected to a MAC. So I'll change it to "PHYs to their respective MACs".
> 
> > +MDIO bus have to be referenced.
> > +
> > +This document introduces two _DSD properties that are to be used
> > +for connecting PHYs on the MDIO bus [3] to the MAC layer.
> > +
> > +These properties are defined in accordance with the "Device
> > +Properties UUID For _DSD" [2] document and the
> > +daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
> > +Data Descriptors containing them.
> > +
> > +phy-handle
> > +----------
> 
> ...
> 
> > +
> > +Later, during the MAC driver initialization, the registered PHY devices
> > +have to be retrieved from the MDIO bus. For this, the MAC driver need
> 
>                                                                     needs
> 
> > +references to the previously registered PHYs which are provided
> > +as device object references (e.g. \_SB.MDI0.PHY1).
> 
> 
> thanks.
> -- 
> ~Randy
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 02/15] net: phy: Introduce fwnode_mdio_find_device()

[Calvin Johnson]

Define fwnode_mdio_find_device() to get a pointer to the
mdio_device from fwnode passed to the function.

Refactor of_mdio_find_device() to use fwnode_mdio_find_device().

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/mdio/of_mdio.c   | 11 +----------
 drivers/net/phy/phy_device.c | 23 +++++++++++++++++++++++
 include/linux/phy.h          |  6 ++++++
 3 files changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 4daf94bb56a5..7bd33b930116 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -347,16 +347,7 @@ EXPORT_SYMBOL(of_mdiobus_register);
  */
 struct mdio_device *of_mdio_find_device(struct device_node *np)
 {
-	struct device *d;
-
-	if (!np)
-		return NULL;
-
-	d = bus_find_device_by_of_node(&mdio_bus_type, np);
-	if (!d)
-		return NULL;
-
-	return to_mdio_device(d);
+	return fwnode_mdio_find_device(of_fwnode_handle(np));
 }
 EXPORT_SYMBOL(of_mdio_find_device);
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8447e56ba572..06e0ddcca8c9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2829,6 +2829,29 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 	return phydrv->config_intr && phydrv->handle_interrupt;
 }
 
+/**
+ * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
+ * @np: pointer to the mdio_device's fwnode
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use
+ */
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	struct device *d;
+
+	if (!fwnode)
+		return NULL;
+
+	d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode);
+	if (!d)
+		return NULL;
+
+	return to_mdio_device(d);
+}
+EXPORT_SYMBOL(fwnode_mdio_find_device);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init
diff --git a/include/linux/phy.h b/include/linux/phy.h
index bc323fbdd21e..8314051d384a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1349,11 +1349,17 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
 static inline
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	return 0;
+}
+static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {
 	return NULL;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 03/15] net: phy: Introduce phy related fwnode functions

[Calvin Johnson]

Define fwnode_phy_find_device() to iterate an mdiobus and find the
phy device of the provided phy fwnode. Additionally define
device_phy_find_device() to find phy device of provided device.

Define fwnode_get_phy_node() to get phy_node using named reference.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()

Changes in v2:
- use reverse christmas tree ordering for local variables

 drivers/net/phy/phy_device.c | 62 ++++++++++++++++++++++++++++++++++++
 include/linux/phy.h          | 20 ++++++++++++
 2 files changed, 82 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 06e0ddcca8c9..66e779cd905a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -9,6 +9,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -2852,6 +2853,67 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 }
 EXPORT_SYMBOL(fwnode_mdio_find_device);
 
+/**
+ * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
+ *
+ * @phy_fwnode: Pointer to the phy's fwnode.
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	struct mdio_device *mdiodev;
+
+	mdiodev = fwnode_mdio_find_device(phy_fwnode);
+	if (!mdiodev)
+		return NULL;
+
+	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+		return to_phy_device(&mdiodev->dev);
+
+	put_device(&mdiodev->dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL(fwnode_phy_find_device);
+
+/**
+ * device_phy_find_device - For the given device, get the phy_device
+ * @dev: Pointer to the given device
+ *
+ * Refer return conditions of fwnode_phy_find_device().
+ */
+struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return fwnode_phy_find_device(dev_fwnode(dev));
+}
+EXPORT_SYMBOL_GPL(device_phy_find_device);
+
+/**
+ * fwnode_get_phy_node - Get the phy_node using the named reference.
+ * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
+ *
+ * Refer return conditions of fwnode_find_reference().
+ * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
+ * and "phy-device" are not supported in ACPI. DT supports all the three
+ * named references to the phy node.
+ */
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *phy_node;
+
+	/* Only phy-handle is used for ACPI */
+	phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
+	if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
+		return phy_node;
+	phy_node = fwnode_find_reference(fwnode, "phy", 0);
+	if (IS_ERR(phy_node))
+		phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
+	return phy_node;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8314051d384a..dee7064ea4eb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1350,6 +1350,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
+struct phy_device *device_phy_find_device(struct device *dev);
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
@@ -1359,6 +1362,23 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 {
 	return 0;
 }
+static inline
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	return NULL;
+}
+
+static inline struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return NULL;
+}
+
+static inline
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	return NULL;
+}
+
 static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 04/15] of: mdio: Refactor of_phy_find_device()

[Calvin Johnson]

Refactor of_phy_find_device() to use fwnode_phy_find_device().

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/mdio/of_mdio.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 7bd33b930116..94ec421dd91b 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -360,18 +360,7 @@ EXPORT_SYMBOL(of_mdio_find_device);
  */
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
-	struct mdio_device *mdiodev;
-
-	mdiodev = of_mdio_find_device(phy_np);
-	if (!mdiodev)
-		return NULL;
-
-	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
-		return to_phy_device(&mdiodev->dev);
-
-	put_device(&mdiodev->dev);
-
-	return NULL;
+	return fwnode_phy_find_device(of_fwnode_handle(phy_np));
 }
 EXPORT_SYMBOL(of_phy_find_device);
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 05/15] net: phy: Introduce fwnode_get_phy_id()

[Calvin Johnson]

Extract phy_id from compatible string. This will be used by
fwnode_mdiobus_register_phy() to create phy device using the
phy_id.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3:
- Use traditional comparison pattern
- Use GENMASK

Changes in v2: None

 drivers/net/phy/phy_device.c | 21 +++++++++++++++++++++
 include/linux/phy.h          |  5 +++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 66e779cd905a..6ebb67a19e69 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -846,6 +846,27 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
 	return 0;
 }
 
+/* Extract the phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB.
+ */
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	unsigned int upper, lower;
+	const char *cp;
+	int ret;
+
+	ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+	if (ret)
+		return ret;
+
+	if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
+		return -EINVAL;
+
+	*phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_get_phy_id);
+
 /**
  * get_phy_device - reads the specified PHY device and returns its @phy_device
  *		    struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index dee7064ea4eb..957ce3c9b058 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1349,6 +1349,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
 struct phy_device *device_phy_find_device(struct device *dev);
@@ -1357,6 +1358,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
+static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	return 0;
+}
 static inline
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 06/15] of: mdio: Refactor of_get_phy_id()

[Calvin Johnson]

With the introduction of fwnode_get_phy_id(), refactor of_get_phy_id()
to use fwnode equivalent.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/mdio/of_mdio.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 94ec421dd91b..d4cc293358f7 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -29,17 +29,7 @@ MODULE_LICENSE("GPL");
  * ethernet-phy-idAAAA.BBBB */
 static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 {
-	struct property *prop;
-	const char *cp;
-	unsigned int upper, lower;
-
-	of_property_for_each_string(device, "compatible", prop, cp) {
-		if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
-			*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
-			return 0;
-		}
-	}
-	return -EINVAL;
+	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
 static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy()

[Calvin Johnson]

Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based on this create a PHY device instance which is
registered on the mdiobus.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/mdio/of_mdio.c |  3 +-
 drivers/net/phy/mdio_bus.c | 65 ++++++++++++++++++++++++++++++++++++++
 include/linux/mdio.h       |  2 ++
 include/linux/of_mdio.h    |  6 +++-
 4 files changed, 74 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index d4cc293358f7..cd7da38ae763 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -32,7 +32,7 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 {
 	struct of_phandle_args arg;
 	int err;
@@ -49,6 +49,7 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 
 	return register_mii_timestamper(arg.np, arg.args[0]);
 }
+EXPORT_SYMBOL(of_find_mii_timestamper);
 
 int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
 			      struct device_node *child, u32 addr)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 823518554079..33d1667fdeca 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -8,6 +8,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>
@@ -106,6 +107,70 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev)
 }
 EXPORT_SYMBOL(mdiobus_unregister_device);
 
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				struct fwnode_handle *child, u32 addr)
+{
+	struct mii_timestamper *mii_ts;
+	struct phy_device *phy;
+	bool is_c45 = false;
+	u32 phy_id;
+	int rc;
+
+	if (is_of_node(child)) {
+		mii_ts = of_find_mii_timestamper(to_of_node(child));
+		if (IS_ERR(mii_ts))
+			return PTR_ERR(mii_ts);
+	}
+
+	rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
+	if (rc >= 0)
+		is_c45 = true;
+
+	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+		phy = get_phy_device(bus, addr, is_c45);
+	else
+		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+	if (IS_ERR(phy)) {
+		if (mii_ts && is_of_node(child))
+			unregister_mii_timestamper(mii_ts);
+		return PTR_ERR(phy);
+	}
+
+	if (is_acpi_node(child)) {
+		phy->irq = bus->irq[addr];
+
+		/* Associate the fwnode with the device structure so it
+		 * can be looked up later.
+		 */
+		phy->mdio.dev.fwnode = child;
+
+		/* All data is now stored in the phy struct, so register it */
+		rc = phy_device_register(phy);
+		if (rc) {
+			phy_device_free(phy);
+			fwnode_handle_put(phy->mdio.dev.fwnode);
+			return rc;
+		}
+	} else if (is_of_node(child)) {
+		rc = of_mdiobus_phy_device_register(bus, phy, to_of_node(child), addr);
+		if (rc) {
+			if (mii_ts)
+				unregister_mii_timestamper(mii_ts);
+			phy_device_free(phy);
+			return rc;
+		}
+
+		/* phy->mii_ts may already be defined by the PHY driver. A
+		 * mii_timestamper probed via the device tree will still have
+		 * precedence.
+		 */
+		if (mii_ts)
+			phy->mii_ts = mii_ts;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
+
 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
 {
 	struct mdio_device *mdiodev = bus->mdio_map[addr];
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ffb787d5ebde..7f4215c069fe 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -381,6 +381,8 @@ int mdiobus_register_device(struct mdio_device *mdiodev);
 int mdiobus_unregister_device(struct mdio_device *mdiodev);
 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				      struct fwnode_handle *child, u32 addr);
 
 /**
  * mdio_module_driver() - Helper macro for registering mdio drivers
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index cfe8c607a628..3b66016f18aa 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -34,6 +34,7 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 int of_phy_register_fixed_link(struct device_node *np);
 void of_phy_deregister_fixed_link(struct device_node *np);
 bool of_phy_is_fixed_link(struct device_node *np);
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *np);
 int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
 				   struct device_node *child, u32 addr);
 
@@ -128,7 +129,10 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
 {
 	return false;
 }
-
+static inline struct mii_timestamper *of_find_mii_timestamper(struct device_node *np)
+{
+	return NULL;
+}
 static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
 					    struct phy_device *phy,
 					    struct device_node *child, u32 addr)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy()

[Russell King - ARM Linux admin]

On Mon, Feb 08, 2021 at 08:42:36PM +0530, Calvin Johnson wrote:
> +int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> +				struct fwnode_handle *child, u32 addr)
> +{
> +	struct mii_timestamper *mii_ts;

If you initialise this to NULL...

> +	struct phy_device *phy;
> +	bool is_c45 = false;
> +	u32 phy_id;
> +	int rc;
> +
> +	if (is_of_node(child)) {
> +		mii_ts = of_find_mii_timestamper(to_of_node(child));
> +		if (IS_ERR(mii_ts))
> +			return PTR_ERR(mii_ts);
> +	}
> +
> +	rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
> +	if (rc >= 0)
> +		is_c45 = true;
> +
> +	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> +		phy = get_phy_device(bus, addr, is_c45);
> +	else
> +		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> +	if (IS_ERR(phy)) {
> +		if (mii_ts && is_of_node(child))

Then you don't need is_of_node() here.

> +		/* phy->mii_ts may already be defined by the PHY driver. A
> +		 * mii_timestamper probed via the device tree will still have
> +		 * precedence.
> +		 */
> +		if (mii_ts)
> +			phy->mii_ts = mii_ts;

Should this be moved out of the if() case?

I'm thinking of the future where we may end up adding mii timestamper
support for ACPI.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy()

[Calvin Johnson]

On Mon, Feb 08, 2021 at 05:40:13PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:36PM +0530, Calvin Johnson wrote:
> > +int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> > +				struct fwnode_handle *child, u32 addr)
> > +{
> > +	struct mii_timestamper *mii_ts;
> 
> If you initialise this to NULL...
> 
> > +	struct phy_device *phy;
> > +	bool is_c45 = false;
> > +	u32 phy_id;
> > +	int rc;
> > +
> > +	if (is_of_node(child)) {
> > +		mii_ts = of_find_mii_timestamper(to_of_node(child));
> > +		if (IS_ERR(mii_ts))
> > +			return PTR_ERR(mii_ts);
> > +	}
> > +
> > +	rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
> > +	if (rc >= 0)
> > +		is_c45 = true;
> > +
> > +	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> > +		phy = get_phy_device(bus, addr, is_c45);
> > +	else
> > +		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> > +	if (IS_ERR(phy)) {
> > +		if (mii_ts && is_of_node(child))
> 
> Then you don't need is_of_node() here.
> 
> > +		/* phy->mii_ts may already be defined by the PHY driver. A
> > +		 * mii_timestamper probed via the device tree will still have
> > +		 * precedence.
> > +		 */
> > +		if (mii_ts)
> > +			phy->mii_ts = mii_ts;
> 
> Should this be moved out of the if() case?
> 
> I'm thinking of the future where we may end up adding mii timestamper
> support for ACPI.

Right. I'll take case of these in next version.

Thanks
Calvin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 08/15] of: mdio: Refactor of_mdiobus_register_phy()

[Calvin Johnson]

Refactor of_mdiobus_register_phy() to use fwnode_mdiobus_register_phy().

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/mdio/of_mdio.c | 40 +-------------------------------------
 1 file changed, 1 insertion(+), 39 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index cd7da38ae763..1b561849269e 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -98,45 +98,7 @@ EXPORT_SYMBOL(of_mdiobus_phy_device_register);
 static int of_mdiobus_register_phy(struct mii_bus *mdio,
 				    struct device_node *child, u32 addr)
 {
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
-	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
-
-	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
-	if (rc) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
-		return rc;
-	}
-
-	/* phy->mii_ts may already be defined by the PHY driver. A
-	 * mii_timestamper probed via the device tree will still have
-	 * precedence.
-	 */
-	if (mii_ts)
-		phy->mii_ts = mii_ts;
-
-	return 0;
+	return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
 }
 
 static int of_mdiobus_register_device(struct mii_bus *mdio,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 09/15] ACPI: utils: Introduce acpi_get_local_address()

[Calvin Johnson]

Introduce a wrapper around the _ADR evaluation.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5:
- Replace fwnode_get_id() with acpi_get_local_address()

Changes in v4:
- Improve code structure to handle all cases

Changes in v3:
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation

Changes in v2: None

 drivers/acpi/utils.c | 14 ++++++++++++++
 include/linux/acpi.h |  7 +++++++
 2 files changed, 21 insertions(+)

diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index d5411a166685..0d3a2b111c0f 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -296,6 +296,20 @@ acpi_evaluate_integer(acpi_handle handle,
 
 EXPORT_SYMBOL(acpi_evaluate_integer);
 
+int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+	unsigned long long adr;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
+	if (ACPI_FAILURE(status))
+		return -ENODATA;
+
+	*addr = (u32)adr;
+	return 0;
+}
+EXPORT_SYMBOL(acpi_get_local_address);
+
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 053bf05fb1f7..4e5ce2b4a69d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -699,6 +699,8 @@ static inline u64 acpi_arch_get_root_pointer(void)
 }
 #endif
 
+int acpi_get_local_address(acpi_handle handle, u32 *addr);
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1
@@ -946,6 +948,11 @@ static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
 	return NULL;
 }
 
+static inline int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+	return -ENODEV;
+}
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 10/15] net: mdio: Add ACPI support code for mdio

[Calvin Johnson]

Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5:
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4: None
Changes in v3: None
Changes in v2: None

 MAINTAINERS                  |  1 +
 drivers/net/mdio/Kconfig     |  7 +++++
 drivers/net/mdio/Makefile    |  1 +
 drivers/net/mdio/acpi_mdio.c | 51 ++++++++++++++++++++++++++++++++++++
 include/linux/acpi_mdio.h    | 27 +++++++++++++++++++
 5 files changed, 87 insertions(+)
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 include/linux/acpi_mdio.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 47a5e683ebfe..ead71f60607d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6669,6 +6669,7 @@ F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/devicetree/bindings/net/qca,ar803x.yaml
 F:	Documentation/networking/phy.rst
 F:	drivers/net/mdio/
+F:	drivers/net/mdio/acpi_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index a10cc460d7cf..df6bb7837d6a 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -27,6 +27,13 @@ config OF_MDIO
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config ACPI_MDIO
+	def_tristate PHYLIB
+	depends on ACPI
+	depends on PHYLIB
+	help
+	  ACPI MDIO bus (Ethernet PHY) accessors
+
 if MDIO_BUS
 
 config MDIO_DEVRES
diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
index 5c498dde463f..2373ade8af13 100644
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
@@ -2,6 +2,7 @@
 # Makefile for Linux MDIO bus drivers
 
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_ACPI_MDIO)	+= acpi_mdio.o
 
 obj-$(CONFIG_MDIO_ASPEED)		+= mdio-aspeed.o
 obj-$(CONFIG_MDIO_BCM_IPROC)		+= mdio-bcm-iproc.o
diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
new file mode 100644
index 000000000000..7859f2f3352b
--- /dev/null
+++ b/drivers/net/mdio/acpi_mdio.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+
+MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
+MODULE_LICENSE("GPL");
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ *
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *child;
+	u32 addr;
+	int ret;
+
+	/* Mask out all PHYs from auto probing. */
+	mdio->phy_mask = ~0;
+	ret = mdiobus_register(mdio);
+	if (ret)
+		return ret;
+
+	mdio->dev.fwnode = fwnode;
+/* Loop over the child nodes and register a phy_device for each PHY */
+	fwnode_for_each_child_node(fwnode, child) {
+		ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+		if ((ret) || addr >= PHY_MAX_ADDR)
+			continue;
+
+		ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+		if (ret == -ENODEV)
+			dev_err(&mdio->dev,
+				"MDIO device at address %d is missing.\n",
+				addr);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);
diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
new file mode 100644
index 000000000000..9be6f63cde8f
--- /dev/null
+++ b/include/linux/acpi_mdio.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	/*
+	 * Fall back to mdiobus_register() function to register a bus.
+	 * This way, we don't have to keep compat bits around in drivers.
+	 */
+
+	return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 10/15] net: mdio: Add ACPI support code for mdio

[Andy Shevchenko]

On Mon, Feb 8, 2021 at 5:14 PM Calvin Johnson
<calvin.johnson@oss.nxp.com> wrote:
>
> Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> each ACPI child node.

...

> +/**
> + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.

> + *

Redundant blank line.

> + * @mdio: pointer to mii_bus structure
> + * @fwnode: pointer to fwnode of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @fwnode.
> + */
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       struct fwnode_handle *child;
> +       u32 addr;
> +       int ret;
> +
> +       /* Mask out all PHYs from auto probing. */

> +       mdio->phy_mask = ~0;

I would rather see GENMASK(31, 0) here because in case the type of the
variable is changed we will need to amend this anyway.

> +       ret = mdiobus_register(mdio);
> +       if (ret)
> +               return ret;

> +       mdio->dev.fwnode = fwnode;

Shouldn't it be rather ACPI_SET_COMPANION() as other bus / drivers do?

> +/* Loop over the child nodes and register a phy_device for each PHY */

Indentation.

> +       fwnode_for_each_child_node(fwnode, child) {
> +               ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);

> +               if ((ret) || addr >= PHY_MAX_ADDR)

Too many parentheses.

> +                       continue;
> +
> +               ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> +               if (ret == -ENODEV)
> +                       dev_err(&mdio->dev,
> +                               "MDIO device at address %d is missing.\n",
> +                               addr);
> +       }
> +       return 0;
> +}

...

> +/*
> + * ACPI helpers for the MDIO (Ethernet PHY) API
> + *
> + */

It's one line AFAICT!

...

> +#include <linux/device.h>
> +#include <linux/phy.h>

This seems a bit inconsistent with the below.
I see the user of mdiobus_register(). It's the only header should be
included. Everything else would be forward declared like

struct fwnode_handle;

> +#if IS_ENABLED(CONFIG_ACPI_MDIO)
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
> +#else /* CONFIG_ACPI_MDIO */
> +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       /*
> +        * Fall back to mdiobus_register() function to register a bus.
> +        * This way, we don't have to keep compat bits around in drivers.
> +        */
> +
> +       return mdiobus_register(mdio);
> +}
> +#endif


-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 11/15] net: mdiobus: Introduce fwnode_mdiobus_register()

[Calvin Johnson]

Introduce fwnode_mdiobus_register() to register PHYs on the  mdiobus.
If the fwnode is DT node, then call of_mdiobus_register().
If it is an ACPI node, then call acpi_mdiobus_register().

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4:
- Remove redundant else from fwnode_mdiobus_register()

Changes in v3:
- Use acpi_mdiobus_register()

Changes in v2: None

 drivers/net/phy/mdio_bus.c | 21 +++++++++++++++++++++
 include/linux/phy.h        |  1 +
 2 files changed, 22 insertions(+)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 33d1667fdeca..c597dd41695d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -9,6 +9,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>
@@ -566,6 +567,26 @@ static int mdiobus_create_device(struct mii_bus *bus,
 	return ret;
 }
 
+/**
+ * fwnode_mdiobus_register - Register mii_bus and create PHYs from fwnode
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function returns of_mdiobus_register() for DT and
+ * acpi_mdiobus_register() for ACPI.
+ */
+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	if (is_of_node(fwnode))
+		return of_mdiobus_register(mdio, to_of_node(fwnode));
+
+	if (is_acpi_node(fwnode))
+		return acpi_mdiobus_register(mdio, fwnode);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register);
+
 /**
  * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
  * @bus: target mii_bus
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 957ce3c9b058..765e1844cfdb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -387,6 +387,7 @@ static inline struct mii_bus *mdiobus_alloc(void)
 	return mdiobus_alloc_size(0);
 }
 
+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
 int __mdiobus_register(struct mii_bus *bus, struct module *owner);
 int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus,
 			    struct module *owner);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 12/15] net/fsl: Use fwnode_mdiobus_register()

[Calvin Johnson]

fwnode_mdiobus_register() internally takes care of both DT
and ACPI cases to register mdiobus. Replace existing
of_mdiobus_register() with fwnode_mdiobus_register().

Note: For both ACPI and DT cases, endianness of MDIO controller
need to be specified using "little-endian" property.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4:
- Cleanup xgmac_mdio_probe()

Changes in v3:
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2: None

 drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index bfa2826c5545..dca5305e7185 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
  * QorIQ 10G MDIO Controller
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  *
  * Authors: Andy Fleming <afleming@freescale.com>
  *          Timur Tabi <timur@freescale.com>
@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 
 static int xgmac_mdio_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct mii_bus *bus;
-	struct resource *res;
 	struct mdio_fsl_priv *priv;
+	struct resource *res;
+	struct mii_bus *bus;
 	int ret;
 
 	/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
+	/* For both ACPI and DT cases, endianness of MDIO controller
+	 * needs to be specified using "little-endian" property.
+	 */
 	priv->is_little_endian = device_property_read_bool(&pdev->dev,
 							   "little-endian");
 
 	priv->has_a011043 = device_property_read_bool(&pdev->dev,
 						      "fsl,erratum-a011043");
 
-	ret = of_mdiobus_register(bus, np);
+	ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
 		goto err_registration;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect()

[Calvin Johnson]

Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4:
- call phy_device_free() before returning

Changes in v3: None
Changes in v2: None

 drivers/net/phy/phylink.c | 56 +++++++++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 59 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 84f6e197f965..5466e1e6272a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
@@ -1120,6 +1121,61 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	if (is_of_node(fwnode)) {
+		/* Fixed links and 802.3z are handled without needing a PHY */
+		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+		     phy_interface_mode_is_8023z(pl->link_interface)))
+			return 0;
+	}
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d81a714cfbbd..75d4f99090fd 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -439,6 +439,9 @@ void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect()

[Russell King - ARM Linux admin]

On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> +			       struct fwnode_handle *fwnode,
> +			       u32 flags)
> +{
> +	struct fwnode_handle *phy_fwnode;
> +	struct phy_device *phy_dev;
> +	int ret;
> +
> +	if (is_of_node(fwnode)) {
> +		/* Fixed links and 802.3z are handled without needing a PHY */
> +		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> +		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> +		     phy_interface_mode_is_8023z(pl->link_interface)))
> +			return 0;

This difference between ACPI and DT really needs to be described in the
commit description.

For example, why is it acceptable to have a PHY in fixed-link mode if
we're using ACPI, and not DT?

If we look at the phylink code, accepting a PHY when in fixed-link mode
is basically not supported... so why should ACPI allow this?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect()

[Calvin Johnson]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect()

[Calvin Johnson]

On Mon, Feb 08, 2021 at 03:31:11PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> > +int phylink_fwnode_phy_connect(struct phylink *pl,
> > +			       struct fwnode_handle *fwnode,
> > +			       u32 flags)
> > +{
> > +	struct fwnode_handle *phy_fwnode;
> > +	struct phy_device *phy_dev;
> > +	int ret;
> > +
> > +	if (is_of_node(fwnode)) {
> > +		/* Fixed links and 802.3z are handled without needing a PHY */
> > +		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> > +		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> > +		     phy_interface_mode_is_8023z(pl->link_interface)))
> > +			return 0;
> 
> This difference between ACPI and DT really needs to be described in the
> commit description.
> 
> For example, why is it acceptable to have a PHY in fixed-link mode if
> we're using ACPI, and not DT?
> 
> If we look at the phylink code, accepting a PHY when in fixed-link mode
> is basically not supported... so why should ACPI allow this?

DT and ACPI should handle fixed-link in similar manner. I'll remove the OF
check.

Thanks
Calvin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect()

[Russell King - ARM Linux admin]

On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
> 
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

Also, the subject line should be "net: phylink: ..." Consistency is
really appreciated.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 14/15] net: phylink: Refactor phylink_of_phy_connect()

[Calvin Johnson]

Refactor phylink_of_phy_connect() to use phylink_fwnode_phy_connect().

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/net/phy/phylink.c | 39 +--------------------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5466e1e6272a..3d0dc53fd4f3 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1080,44 +1080,7 @@ EXPORT_SYMBOL_GPL(phylink_connect_phy);
 int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 			   u32 flags)
 {
-	struct device_node *phy_node;
-	struct phy_device *phy_dev;
-	int ret;
-
-	/* Fixed links and 802.3z are handled without needing a PHY */
-	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
-	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
-	     phy_interface_mode_is_8023z(pl->link_interface)))
-		return 0;
-
-	phy_node = of_parse_phandle(dn, "phy-handle", 0);
-	if (!phy_node)
-		phy_node = of_parse_phandle(dn, "phy", 0);
-	if (!phy_node)
-		phy_node = of_parse_phandle(dn, "phy-device", 0);
-
-	if (!phy_node) {
-		if (pl->cfg_link_an_mode == MLO_AN_PHY)
-			return -ENODEV;
-		return 0;
-	}
-
-	phy_dev = of_phy_find_device(phy_node);
-	/* We're done with the phy_node handle */
-	of_node_put(phy_node);
-	if (!phy_dev)
-		return -ENODEV;
-
-	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
-				pl->link_interface);
-	if (ret)
-		return ret;
-
-	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
-	if (ret)
-		phy_detach(phy_dev);
-
-	return ret;
+	return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Calvin Johnson]

Modify dpaa2_mac_connect() to support ACPI along with DT.
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.

Replace of_get_phy_mode with fwnode_get_phy_mode to get
phy-mode for a dpmac_node.

Use helper function phylink_fwnode_phy_connect() to find phy_dev and
connect to mac->phylink.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5:
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4: None
Changes in v3: None
Changes in v2:
- Refactor OF functions to use fwnode functions

 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 91 +++++++++++--------
 1 file changed, 54 insertions(+), 37 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ccaf7e35abeb..87bb49722611 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* Copyright 2019 NXP */
 
+#include <linux/acpi.h>
+#include <linux/property.h>
+
 #include "dpaa2-eth.h"
 #include "dpaa2-mac.h"
 
@@ -34,39 +37,51 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 	return 0;
 }
 
-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+						u16 dpmac_id)
 {
-	struct device_node *dpmacs, *dpmac = NULL;
-	u32 id;
+	struct fwnode_handle *parent, *child  = NULL;
+	struct device_node *dpmacs = NULL;
 	int err;
+	u32 id;
 
-	dpmacs = of_find_node_by_name(NULL, "dpmacs");
-	if (!dpmacs)
-		return NULL;
+	if (is_of_node(dev->parent->fwnode)) {
+		dpmacs = of_find_node_by_name(NULL, "dpmacs");
+		if (!dpmacs)
+			return NULL;
+		parent = of_fwnode_handle(dpmacs);
+	} else if (is_acpi_node(dev->parent->fwnode)) {
+		parent = dev->parent->fwnode;
+	}
 
-	while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
-		err = of_property_read_u32(dpmac, "reg", &id);
-		if (err)
+	fwnode_for_each_child_node(parent, child) {
+		err = -EINVAL;
+		if (is_acpi_device_node(child))
+			err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+		else if (is_of_node(child))
+			err = of_property_read_u32(to_of_node(child), "reg", &id);
+		if (err) {
 			continue;
-		if (id == dpmac_id)
-			break;
+		} else if (id == dpmac_id) {
+			if (is_of_node(dev->parent->fwnode))
+				of_node_put(dpmacs);
+			return child;
+		}
 	}
-
-	of_node_put(dpmacs);
-
-	return dpmac;
+	if (is_of_node(dev->parent->fwnode))
+		of_node_put(dpmacs);
+	return NULL;
 }
 
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
 				 struct dpmac_attr attr)
 {
 	phy_interface_t if_mode;
 	int err;
 
-	err = of_get_phy_mode(node, &if_mode);
-	if (!err)
-		return if_mode;
+	err = fwnode_get_phy_mode(dpmac_node);
+	if (err > 0)
+		return err;
 
 	err = phy_mode(attr.eth_if, &if_mode);
 	if (!err)
@@ -235,26 +250,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
 };
 
 static int dpaa2_pcs_create(struct dpaa2_mac *mac,
-			    struct device_node *dpmac_node, int id)
+			    struct fwnode_handle *dpmac_node,
+			    int id)
 {
 	struct mdio_device *mdiodev;
-	struct device_node *node;
+	struct fwnode_handle *node;
 
-	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
-	if (!node) {
+	node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+	if (IS_ERR(node)) {
 		/* do not error out on old DTS files */
 		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
 		return 0;
 	}
 
-	if (!of_device_is_available(node)) {
+	if (!of_device_is_available(to_of_node(node))) {
 		netdev_err(mac->net_dev, "pcs-handle node not available\n");
-		of_node_put(node);
+		of_node_put(to_of_node(node));
 		return -ENODEV;
 	}
 
-	mdiodev = of_mdio_find_device(node);
-	of_node_put(node);
+	mdiodev = fwnode_mdio_find_device(node);
+	fwnode_handle_put(node);
 	if (!mdiodev)
 		return -EPROBE_DEFER;
 
@@ -283,13 +299,12 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct net_device *net_dev = mac->net_dev;
-	struct device_node *dpmac_node;
+	struct fwnode_handle *dpmac_node = NULL;
 	struct phylink *phylink;
 	int err;
 
 	mac->if_link_type = mac->attr.link_type;
-
-	dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+	dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
 		return -ENODEV;
@@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	 * error out if the interface mode requests them and there is no PHY
 	 * to act upon them
 	 */
-	if (of_phy_is_fixed_link(dpmac_node) &&
+	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
 	    (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -327,7 +342,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
 	phylink = phylink_create(&mac->phylink_config,
-				 of_fwnode_handle(dpmac_node), mac->if_mode,
+				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
@@ -338,13 +353,14 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	if (mac->pcs)
 		phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
 
-	err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+	err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
 	if (err) {
-		netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+		netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
 		goto err_phylink_destroy;
 	}
 
-	of_node_put(dpmac_node);
+	if (is_of_node(dpmac_node))
+		fwnode_handle_put(dpmac_node);
 
 	return 0;
 
@@ -353,7 +369,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 err_pcs_destroy:
 	dpaa2_pcs_destroy(mac);
 err_put_node:
-	of_node_put(dpmac_node);
+	if (is_of_node(dpmac_node))
+		fwnode_handle_put(dpmac_node);
 
 	return err;
 }
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Andy Shevchenko]

On Mon, Feb 8, 2021 at 5:15 PM Calvin Johnson
<calvin.johnson@oss.nxp.com> wrote:
>
> Modify dpaa2_mac_connect() to support ACPI along with DT.
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> DT or ACPI.
>
> Replace of_get_phy_mode with fwnode_get_phy_mode to get
> phy-mode for a dpmac_node.
>
> Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> connect to mac->phylink.

...

> +       if (is_of_node(dev->parent->fwnode)) {
> +               dpmacs = of_find_node_by_name(NULL, "dpmacs");
> +               if (!dpmacs)
> +                       return NULL;
> +               parent = of_fwnode_handle(dpmacs);
> +       } else if (is_acpi_node(dev->parent->fwnode)) {

> +               parent = dev->parent->fwnode;

dev_fwnode(dev->parent) ?

> +       }

...

> +               if (err) {
>                         continue;

> +               } else if (id == dpmac_id) {

Useless 'else'

> +                       if (is_of_node(dev->parent->fwnode))

dev_fwnode() ?

> +                               of_node_put(dpmacs);
> +                       return child;
> +               }

...

> +       if (is_of_node(dev->parent->fwnode))

Ditto ?

> +               of_node_put(dpmacs);

--
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Russell King - ARM Linux admin]

On Mon, Feb 08, 2021 at 08:42:44PM +0530, Calvin Johnson wrote:
> Modify dpaa2_mac_connect() to support ACPI along with DT.
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> DT or ACPI.
> 
> Replace of_get_phy_mode with fwnode_get_phy_mode to get
> phy-mode for a dpmac_node.
> 
> Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> connect to mac->phylink.
> 
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>

I don't think this does the full job.

>  static int dpaa2_pcs_create(struct dpaa2_mac *mac,
> -			    struct device_node *dpmac_node, int id)
> +			    struct fwnode_handle *dpmac_node,
> +			    int id)
>  {
>  	struct mdio_device *mdiodev;
> -	struct device_node *node;
> +	struct fwnode_handle *node;
>  
> -	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
> -	if (!node) {
> +	node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
> +	if (IS_ERR(node)) {
>  		/* do not error out on old DTS files */
>  		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
>  		return 0;
>  	}
>  
> -	if (!of_device_is_available(node)) {
> +	if (!of_device_is_available(to_of_node(node))) {

If "node" is an ACPI node, then to_of_node() returns NULL, and
of_device_is_available(NULL) is false. So, if we're using ACPI
and we enter this path, we will always hit the error below:

>  		netdev_err(mac->net_dev, "pcs-handle node not available\n");
> -		of_node_put(node);
> +		of_node_put(to_of_node(node));
>  		return -ENODEV;
>  	}

> @@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
>  	 * error out if the interface mode requests them and there is no PHY
>  	 * to act upon them
>  	 */
> -	if (of_phy_is_fixed_link(dpmac_node) &&
> +	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&

If "dpmac_node" is an ACPI node, to_of_node() will return NULL, and
of_phy_is_fixed_link() will oops.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Calvin Johnson]

On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:44PM +0530, Calvin Johnson wrote:
> > Modify dpaa2_mac_connect() to support ACPI along with DT.
> > Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> > DT or ACPI.
> > 
> > Replace of_get_phy_mode with fwnode_get_phy_mode to get
> > phy-mode for a dpmac_node.
> > 
> > Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> > connect to mac->phylink.
> > 
> > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> 
> I don't think this does the full job.
> 
> >  static int dpaa2_pcs_create(struct dpaa2_mac *mac,
> > -			    struct device_node *dpmac_node, int id)
> > +			    struct fwnode_handle *dpmac_node,
> > +			    int id)
> >  {
> >  	struct mdio_device *mdiodev;
> > -	struct device_node *node;
> > +	struct fwnode_handle *node;
> >  
> > -	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
> > -	if (!node) {
> > +	node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
> > +	if (IS_ERR(node)) {
> >  		/* do not error out on old DTS files */
> >  		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
> >  		return 0;
> >  	}
> >  
> > -	if (!of_device_is_available(node)) {
> > +	if (!of_device_is_available(to_of_node(node))) {
> 
> If "node" is an ACPI node, then to_of_node() returns NULL, and
> of_device_is_available(NULL) is false. So, if we're using ACPI
> and we enter this path, we will always hit the error below:
> 
> >  		netdev_err(mac->net_dev, "pcs-handle node not available\n");
> > -		of_node_put(node);
> > +		of_node_put(to_of_node(node));
> >  		return -ENODEV;
> >  	}
> 
> > @@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> >  	 * error out if the interface mode requests them and there is no PHY
> >  	 * to act upon them
> >  	 */
> > -	if (of_phy_is_fixed_link(dpmac_node) &&
> > +	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
> 
> If "dpmac_node" is an ACPI node, to_of_node() will return NULL, and
> of_phy_is_fixed_link() will oops.

I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.

--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
        int len, err;
        const char *managed;

+       if (!np)
+               return false;
+
        /* New binding */
        dn = of_get_child_by_name(np, "fixed-link");
        if (dn) {

Regards
Calvin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Andy Shevchenko]

On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
<calvin.johnson@oss.nxp.com> wrote:
> On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:

...

> I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
>
> --- a/drivers/net/mdio/of_mdio.c
> +++ b/drivers/net/mdio/of_mdio.c
> @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
>         int len, err;
>         const char *managed;
>
> +       if (!np)
> +               return false;

AFAICS this doesn't add anything: all of the of_* APIs should handle
OF nodes being NULL below.

>         /* New binding */
>         dn = of_get_child_by_name(np, "fixed-link");
>         if (dn) {

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Andy Shevchenko]

On Mon, Feb 15, 2021 at 5:13 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
> <calvin.johnson@oss.nxp.com> wrote:
> > On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
>
> ...
>
> > I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
> >
> > --- a/drivers/net/mdio/of_mdio.c
> > +++ b/drivers/net/mdio/of_mdio.c
> > @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
> >         int len, err;
> >         const char *managed;
> >
> > +       if (!np)
> > +               return false;
>
> AFAICS this doesn't add anything: all of the of_* APIs should handle
> OF nodes being NULL below.
>
> >         /* New binding */
> >         dn = of_get_child_by_name(np, "fixed-link");
> >         if (dn) {

Yes, of_get_next_child() and of_get_property() are NULL aware.

So, the check is redundant.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

[Calvin Johnson]

On Mon, Feb 15, 2021 at 05:15:36PM +0200, Andy Shevchenko wrote:
> On Mon, Feb 15, 2021 at 5:13 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
> > <calvin.johnson@oss.nxp.com> wrote:
> > > On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
> >
> > ...
> >
> > > I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
> > >
> > > --- a/drivers/net/mdio/of_mdio.c
> > > +++ b/drivers/net/mdio/of_mdio.c
> > > @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
> > >         int len, err;
> > >         const char *managed;
> > >
> > > +       if (!np)
> > > +               return false;
> >
> > AFAICS this doesn't add anything: all of the of_* APIs should handle
> > OF nodes being NULL below.
> >
> > >         /* New binding */
> > >         dn = of_get_child_by_name(np, "fixed-link");
> > >         if (dn) {
> 
> Yes, of_get_next_child() and of_get_property() are NULL aware.
> 
> So, the check is redundant.
Yes, all the function calls in of_phy_is_fixed_link() handles NULL properly.
I don't see any way this function can oops.

Regards
Calvin
 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel