[PATCH] ARM: configs: ux500: Update for new drivers

* [PATCH] ARM: configs: ux500: Update for new drivers
@ 2021-03-01 23:20 Linus Walleij
  2021-04-01 21:06 ` Arnd Bergmann
  0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2021-03-01 23:20 UTC (permalink / raw)
  To: arm, soc; +Cc: Linus Walleij, Stephan Gerhold, linux-arm-kernel

Some new driver support for the Ux500 devices landed in
v5.12-rc1 so update the defconfig to use them:

- TM2 touchkey, used on the Golden and Janice.
- SPI GPIO, used for the Janice display control.
- NTC thermistor, used for the HREF temperature
  sensors.
- V4L2 flash control that gives support for LED
  torch to userspaces such as Phosh.
- The LEDs Flash class and RT8515 Flash/torch LED
  driver used in all the Samsung mobiles.
- FSA9480 extcon, used by Janice.
- BMC150 accelerometer, used by Janice.
- IIO rescaler, used for thermistors and ALS
  on Janice.
- MPU3050 gyroscope driver used by Janice.
- Yamaha YAS530 magnetometer driver used by Janice.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
SoC folks: please apply this directly for the -rcs.
---
 arch/arm/configs/u8500_defconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index bcedfe1422aa..dbb1ef601762 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -55,6 +55,7 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_NOMADIK=y
 CONFIG_KEYBOARD_STMPE=y
 CONFIG_KEYBOARD_TC3589X=y
+CONFIG_KEYBOARD_TM2_TOUCHKEY=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
@@ -74,10 +75,12 @@ CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_NTC_THERMISTOR=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -85,6 +88,10 @@ CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_V4L2_FLASH_LED_CLASS=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_NOVATEK_NT35510=y
 CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
@@ -112,10 +119,12 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LP55XX_COMMON=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_RT8515=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -124,16 +133,21 @@ CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HSEM_U8500=y
+CONFIG_EXTCON_FSA9480=y
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_BMA180=y
+CONFIG_BMC150_ACCEL=y
 CONFIG_IIO_ST_ACCEL_3AXIS=y
+CONFIG_IIO_RESCALE=y
+CONFIG_MPU3050_I2C=y
 CONFIG_IIO_ST_GYRO_3AXIS=y
 CONFIG_INV_MPU6050_I2C=y
 CONFIG_BH1780=y
 CONFIG_GP2AP002=y
 CONFIG_AK8974=y
 CONFIG_IIO_ST_MAGN_3AXIS=y
+CONFIG_YAMAHA_YAS530=y
 CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_IIO_ST_PRESS=y
 CONFIG_EXT2_FS=y
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 2+ messages in thread