linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland@arm.com>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: mark.rutland@arm.com, catalin.marinas@arm.com, marcan@marcan.st,
	james.morse@arm.com, maz@kernel.org, tglx@linutronix.de,
	will@kernel.org
Subject: [PATCHv2 0/8] arm64: Support FIQ controller registration
Date: Tue,  2 Mar 2021 10:12:03 +0000	[thread overview]
Message-ID: <20210302101211.2328-1-mark.rutland@arm.com> (raw)

Hector's M1 support series [1] shows that some platforms have critical
interrupts wired to FIQ, and to support these platforms we need to support
handling FIQ exceptions. Other contemporary platforms don't use FIQ (since e.g.
this is usually routed to EL3), and as we never expect to take an FIQ, we have
the FIQ vector cause a panic.

Since the use of FIQ is a platform integration detail (which can differ across
bare-metal and virtualized environments), we need be able to explicitly opt-in
to handling FIQs while retaining the existing behaviour otherwise. This series
adds a new set_handle_fiq() hook so that the FIQ controller can do so, and
where no controller is registered the default handler will panic(). For
consistency the set_handle_irq() code is made to do the same.

The first couple of patches are from Marc's irq/drop-generic_irq_multi_handler
branch [2] on kernel.org, and clean up CONFIG_GENERIC_IRQ_MULTI_HANDLER usage.

The next four patches move arm64 over to a local set_handle_irq()
implementation, which is written to share code with a set_handle_fiq() function
in the last two patches. This adds a default handler which will directly
panic() rather than branching to NULL if an IRQ is taken unexpectedly, and the
boot-time panic in the absence of a handler is removed (for consistently with
FIQ support added later).

The penultimate patch reworks arm64's IRQ masking to always keep DAIF.[IF] in
sync, so that we can treat IRQ and FIQ as equals. This is cherry-picked from
Hector's reply [3] to the first version of this series.

The final patch adds the low-level FIQ exception handling and registration
mechanism atop the prior rework.

I'm hoping that we can get the first 2 patches in as a preparatory cleanup for
the next rc or so, and then the rest of the series can be rebased atop that.
I've pushed the series out to my arm64/fiq branch [4] on kernel.org, also
tagged as arm64-fiq-20210302, atop v5.12-rc1.

Since v1 [5]:
* Rebase to v5.12-rc1
* Pick up Hector's latest DAIF.[IF] patch
* Use "root {IRQ,FIQ} handler" rather than "{IRQ,FIQ} controller"
* Remove existing panic per Marc's comments
* Log registered root handlers
* Make default root handlers static
* Remove redundant el0_fiq_invalid_compat, per Joey's comments

Thanks,
Mark.

[1] https://http://lore.kernel.org/r/20210215121713.57687-1-marcan@marcan.st
[2] https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/drop-generic_irq_multi_handler
[3] https://lore.kernel.org/r/20210219172530.45805-1-marcan@marcan.st
[4] https://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git/log/?h=arm64/fiq
[5] https://lore.kernel.org/r/20210219113904.41736-1-mark.rutland@arm.com

Hector Martin (1):
  arm64: Always keep DAIF.[IF] in sync

Marc Zyngier (5):
  ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
  irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
  genirq: Allow architectures to override set_handle_irq() fallback
  arm64: don't use GENERIC_IRQ_MULTI_HANDLER
  arm64: entry: factor irq triage logic into macros

Mark Rutland (2):
  arm64: irq: rework root IRQ handler registration
  arm64: irq: allow FIQs to be handled

 arch/arm/Kconfig                    |   1 +
 arch/arm64/Kconfig                  |   1 -
 arch/arm64/include/asm/arch_gicv3.h |   2 +-
 arch/arm64/include/asm/assembler.h  |   8 +--
 arch/arm64/include/asm/daifflags.h  |  10 ++--
 arch/arm64/include/asm/irq.h        |   4 ++
 arch/arm64/include/asm/irqflags.h   |  16 +++--
 arch/arm64/kernel/entry.S           | 114 +++++++++++++++++++++---------------
 arch/arm64/kernel/irq.c             |  35 ++++++++++-
 arch/arm64/kernel/process.c         |   2 +-
 arch/arm64/kernel/smp.c             |   1 +
 drivers/irqchip/Kconfig             |   9 ---
 include/linux/irq.h                 |   2 +
 13 files changed, 126 insertions(+), 79 deletions(-)

-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-03-02 10:13 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-02 10:12 Mark Rutland [this message]
2021-03-02 10:12 ` [PATCHv2 1/8] ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly Mark Rutland
2021-03-02 10:12 ` [PATCHv2 2/8] irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER Mark Rutland
2021-03-02 10:12 ` [PATCHv2 3/8] genirq: Allow architectures to override set_handle_irq() fallback Mark Rutland
2021-03-02 10:12 ` [PATCHv2 4/8] arm64: don't use GENERIC_IRQ_MULTI_HANDLER Mark Rutland
2021-03-02 10:12 ` [PATCHv2 5/8] arm64: irq: rework root IRQ handler registration Mark Rutland
2021-03-02 10:12 ` [PATCHv2 6/8] arm64: entry: factor irq triage logic into macros Mark Rutland
2021-03-02 10:12 ` [PATCHv2 7/8] arm64: Always keep DAIF.[IF] in sync Mark Rutland
2021-03-02 10:12 ` [PATCHv2 8/8] arm64: irq: allow FIQs to be handled Mark Rutland
2021-03-05 10:08 ` [PATCHv2 0/8] arm64: Support FIQ controller registration Hector Martin
2021-03-08 17:52   ` Mark Rutland
2021-03-08 20:20     ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210302101211.2328-1-mark.rutland@arm.com \
    --to=mark.rutland@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    --subject='Re: [PATCHv2 0/8] arm64: Support FIQ controller registration' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).