* [PATCH RESEND 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding [not found] <20210305125302.21593-1-zajec5@gmail.com> @ 2021-03-05 12:59 ` Rafał Miłecki 2021-03-05 12:59 ` [PATCH RESEND 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki 2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki 0 siblings, 2 replies; 9+ messages in thread From: Rafał Miłecki @ 2021-03-05 12:59 UTC (permalink / raw) To: Florian Fainelli, Rob Herring Cc: linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> One more BCM4906 based device. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- RESEND: Got "550 Unknown recipient" for linux-arm-kernel@lists.infradead.org <dwmw2_go`> yeah, the mailman setup on the new host got commented out for a few seconds. --- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index e55731f43c84..2cd4e4a32278 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - netgear,r8000p + - tplink,archer-c2300-v1 - const: brcm,bcm4906 - const: brcm,bcm4908 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH RESEND 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 2021-03-05 12:59 ` [PATCH RESEND 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki @ 2021-03-05 12:59 ` Rafał Miłecki 2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki 1 sibling, 0 replies; 9+ messages in thread From: Rafał Miłecki @ 2021-03-05 12:59 UTC (permalink / raw) To: Florian Fainelli, Rob Herring Cc: linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports, 1 WAN port. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- RESEND: Got "550 Unknown recipient" for linux-arm-kernel@lists.infradead.org <dwmw2_go`> yeah, the mailman setup on the new host got commented out for a few seconds. --- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 + .../bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ebebc0cd421f..cc75854519ac 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 000000000000..85820c760260 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + 2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + 5ghz { + function = "5ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + wan-amber { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + wan-blue { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + lan { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + usb-high-white { + function = "usbup"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + usb-low-white { + function = "usbdown"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + brightness { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding 2021-03-05 12:59 ` [PATCH RESEND 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki 2021-03-05 12:59 ` [PATCH RESEND 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki @ 2021-03-08 13:18 ` Rafał Miłecki 2021-03-08 13:18 ` [PATCH V2 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki ` (2 more replies) 1 sibling, 3 replies; 9+ messages in thread From: Rafał Miłecki @ 2021-03-08 13:18 UTC (permalink / raw) To: Florian Fainelli, Rob Herring Cc: linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> One more BCM4906 based device. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index e55731f43c84..2cd4e4a32278 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - netgear,r8000p + - tplink,archer-c2300-v1 - const: brcm,bcm4906 - const: brcm,bcm4908 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V2 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki @ 2021-03-08 13:18 ` Rafał Miłecki 2021-03-10 3:02 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rob Herring 2021-03-10 7:46 ` [PATCH V3 " Rafał Miłecki 2 siblings, 0 replies; 9+ messages in thread From: Rafał Miłecki @ 2021-03-08 13:18 UTC (permalink / raw) To: Florian Fainelli, Rob Herring Cc: linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports, 1 WAN port. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- V2: Fix nodes names for power and USB LEDs. V1 got debugging names. --- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 + .../bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ebebc0cd421f..cc75854519ac 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 000000000000..7bb75359aef8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + 2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + 5ghz { + function = "5ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + wan-amber { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + wan-blue { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + lan { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + usb2 { + function = "usb2"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + usb3 { + function = "usbd3"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + brightness { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding 2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki 2021-03-08 13:18 ` [PATCH V2 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki @ 2021-03-10 3:02 ` Rob Herring 2021-03-10 7:46 ` [PATCH V3 " Rafał Miłecki 2 siblings, 0 replies; 9+ messages in thread From: Rob Herring @ 2021-03-10 3:02 UTC (permalink / raw) To: Rafał Miłecki Cc: linux-arm-kernel, Florian Fainelli, Rafał Miłecki, devicetree, bcm-kernel-feedback-list, Rob Herring On Mon, 08 Mar 2021 14:18:49 +0100, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > One more BCM4906 based device. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 + > 1 file changed, 1 insertion(+) > Reviewed-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH V3 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding 2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki 2021-03-08 13:18 ` [PATCH V2 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki 2021-03-10 3:02 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rob Herring @ 2021-03-10 7:46 ` Rafał Miłecki 2021-03-10 7:46 ` [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki 2021-03-13 17:49 ` [PATCH V3 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Florian Fainelli 2 siblings, 2 replies; 9+ messages in thread From: Rafał Miłecki @ 2021-03-10 7:46 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki, Rob Herring From: Rafał Miłecki <rafal@milecki.pl> One more BCM4906 based device. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index e55731f43c84..2cd4e4a32278 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - netgear,r8000p + - tplink,archer-c2300-v1 - const: brcm,bcm4906 - const: brcm,bcm4908 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 2021-03-10 7:46 ` [PATCH V3 " Rafał Miłecki @ 2021-03-10 7:46 ` Rafał Miłecki 2021-03-13 17:49 ` Florian Fainelli 2021-03-13 17:49 ` [PATCH V3 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Florian Fainelli 1 sibling, 1 reply; 9+ messages in thread From: Rafał Miłecki @ 2021-03-10 7:46 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports, 1 WAN port. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- V2: Fix nodes names for power and USB LEDs. V1 got debugging names. V3: Fix USD LEDs nodes names (use "led-" prefix) --- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 + .../bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ebebc0cd421f..cc75854519ac 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 000000000000..b63eefab48bd --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + function = "5ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan-blue { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-lan { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usbd3"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-brightness { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 2021-03-10 7:46 ` [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki @ 2021-03-13 17:49 ` Florian Fainelli 0 siblings, 0 replies; 9+ messages in thread From: Florian Fainelli @ 2021-03-13 17:49 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Wed, 10 Mar 2021 08:46:03 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It > has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports, > 1 WAN port. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding 2021-03-10 7:46 ` [PATCH V3 " Rafał Miłecki 2021-03-10 7:46 ` [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki @ 2021-03-13 17:49 ` Florian Fainelli 1 sibling, 0 replies; 9+ messages in thread From: Florian Fainelli @ 2021-03-13 17:49 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki, Rob Herring On Wed, 10 Mar 2021 08:46:02 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > One more BCM4906 based device. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > Reviewed-by: Rob Herring <robh@kernel.org> > --- Applied to devicetree-arm64/next, thanks! -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-03-13 17:51 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20210305125302.21593-1-zajec5@gmail.com>
2021-03-05 12:59 ` [PATCH RESEND 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki
2021-03-05 12:59 ` [PATCH RESEND 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki
2021-03-08 13:18 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rafał Miłecki
2021-03-08 13:18 ` [PATCH V2 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki
2021-03-10 3:02 ` [PATCH V2 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Rob Herring
2021-03-10 7:46 ` [PATCH V3 " Rafał Miłecki
2021-03-10 7:46 ` [PATCH V3 2/2] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1 Rafał Miłecki
2021-03-13 17:49 ` Florian Fainelli
2021-03-13 17:49 ` [PATCH V3 1/2] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding Florian Fainelli
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).