* [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider @ 2021-03-09 8:26 Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock Amelie Delaunay 0 siblings, 2 replies; 4+ messages in thread From: Amelie Delaunay @ 2021-03-09 8:26 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Alexandre Torgue, Maxime Coquelin Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel, linux-stm32, Amelie Delaunay STM32 USBPHYC provides clocks to STM32 RCC pour STM32 USB controllers. Specifically, ck_usbo_48m is a possible clock parent for USB OTG clock, during OTG Full-Speed operation. This series registers the usbphyc as clock provider of this ck_usbo_48m clock. --- Resent with linux-phy ML in cc Changes in v3: - remove #clock-cells from required properties Changes in v2: - fix COMMON_CLK dependency issue reported by kernel test robot --- Amelie Delaunay (2): dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock .../bindings/phy/phy-stm32-usbphyc.yaml | 5 ++ drivers/phy/st/Kconfig | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 65 +++++++++++++++++++ 3 files changed, 71 insertions(+) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
* [RESEND PATCH v3 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property 2021-03-09 8:26 [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider Amelie Delaunay @ 2021-03-09 8:26 ` Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock Amelie Delaunay 1 sibling, 0 replies; 4+ messages in thread From: Amelie Delaunay @ 2021-03-09 8:26 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Alexandre Torgue, Maxime Coquelin Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel, linux-stm32, Amelie Delaunay usbphyc provides a unique clock called ck_usbo_48m. STM32 USB OTG needs a 48Mhz clock (utmifs_clk48) for Full-Speed operation. ck_usbo_48m is a possible parent clock for USB OTG 48Mhz clock. ck_usbo_48m is available as soon as the PLL is enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> --- Changes in v3: - add Rob's Acked-by - remove #clock-cells from required properties --- Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 46df6786727a..018cc1246ee1 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -51,6 +51,10 @@ properties: vdda1v8-supply: description: regulator providing 1V8 power supply to the PLL block + '#clock-cells': + description: number of clock cells for ck_usbo_48m consumer + const: 0 + #Required child nodes: patternProperties: @@ -120,6 +124,7 @@ examples: vdda1v8-supply = <®18>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; usbphyc_port0: usb-phy@0 { reg = <0>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock 2021-03-09 8:26 [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property Amelie Delaunay @ 2021-03-09 8:26 ` Amelie Delaunay 1 sibling, 0 replies; 4+ messages in thread From: Amelie Delaunay @ 2021-03-09 8:26 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Alexandre Torgue, Maxime Coquelin Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel, linux-stm32, Amelie Delaunay ck_usbo_48m is generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver. ck_usbo_48m is available as soon as the PLL is enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- No changes in v3. Changes in v2: - fix COMMON_CLK dependency issue reported by kernel test robot --- drivers/phy/st/Kconfig | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 65 ++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig index b32f44ff9033..3fc3d0781fb8 100644 --- a/drivers/phy/st/Kconfig +++ b/drivers/phy/st/Kconfig @@ -36,6 +36,7 @@ config PHY_STIH407_USB config PHY_STM32_USBPHYC tristate "STMicroelectronics STM32 USB HS PHY Controller driver" depends on ARCH_STM32 || COMPILE_TEST + depends on COMMON_CLK select GENERIC_PHY help Enable this to support the High-Speed USB transceivers that are part diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index d08fbb180e43..c184f4e34584 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -7,6 +7,7 @@ */ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/iopoll.h> #include <linux/kernel.h> @@ -70,6 +71,7 @@ struct stm32_usbphyc { struct regulator *vdda1v1; struct regulator *vdda1v8; atomic_t n_pll_cons; + struct clk_hw clk48_hw; int switch_setup; }; @@ -295,6 +297,61 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .owner = THIS_MODULE, }; +static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + return stm32_usbphyc_pll_enable(usbphyc); +} + +static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + stm32_usbphyc_pll_disable(usbphyc); +} + +static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + return 48000000; +} + +static const struct clk_ops usbphyc_clk48_ops = { + .prepare = stm32_usbphyc_clk48_prepare, + .unprepare = stm32_usbphyc_clk48_unprepare, + .recalc_rate = stm32_usbphyc_clk48_recalc_rate, +}; + +static void stm32_usbphyc_clk48_unregister(void *data) +{ + struct stm32_usbphyc *usbphyc = data; + + of_clk_del_provider(usbphyc->dev->of_node); + clk_hw_unregister(&usbphyc->clk48_hw); +} + +static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) +{ + struct device_node *node = usbphyc->dev->of_node; + struct clk_init_data init = { }; + int ret = 0; + + init.name = "ck_usbo_48m"; + init.ops = &usbphyc_clk48_ops; + + usbphyc->clk48_hw.init = &init; + + ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); + if (ret) + clk_hw_unregister(&usbphyc->clk48_hw); + + return ret; +} + static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, u32 utmi_switch) { @@ -473,6 +530,12 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) goto clk_disable; } + ret = stm32_usbphyc_clk48_register(usbphyc); + if (ret) { + dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); + goto clk_disable; + } + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); dev_info(dev, "registered rev:%lu.%lu\n", FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); @@ -497,6 +560,8 @@ static int stm32_usbphyc_remove(struct platform_device *pdev) if (usbphyc->phys[port]->active) stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); + stm32_usbphyc_clk48_unregister(usbphyc); + clk_disable_unprepare(usbphyc->clk); return 0; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider @ 2021-03-04 16:04 Amelie Delaunay 2021-03-04 16:04 ` [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock Amelie Delaunay 0 siblings, 1 reply; 4+ messages in thread From: Amelie Delaunay @ 2021-03-04 16:04 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Alexandre Torgue, Maxime Coquelin Cc: linux-kernel, devicetree, linux-arm-kernel, linux-stm32, Amelie Delaunay STM32 USBPHYC provides clocks to STM32 RCC pour STM32 USB controllers. Specifically, ck_usbo_48m is a possible clock parent for USB OTG clock, during OTG Full-Speed operation. This series registers the usbphyc as clock provider of this ck_usbo_48m clock. --- Changes in v3: - remove #clock-cells from required properties Changes in v2: - fix COMMON_CLK dependency issue reported by kernel test robot --- Amelie Delaunay (2): dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock .../bindings/phy/phy-stm32-usbphyc.yaml | 5 ++ drivers/phy/st/Kconfig | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 65 +++++++++++++++++++ 3 files changed, 71 insertions(+) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
* [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock 2021-03-04 16:04 [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider Amelie Delaunay @ 2021-03-04 16:04 ` Amelie Delaunay 0 siblings, 0 replies; 4+ messages in thread From: Amelie Delaunay @ 2021-03-04 16:04 UTC (permalink / raw) To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring, Alexandre Torgue, Maxime Coquelin Cc: linux-kernel, devicetree, linux-arm-kernel, linux-stm32, Amelie Delaunay ck_usbo_48m is generated by usbphyc PLL and used by OTG controller for Full-Speed use cases with dedicated Full-Speed transceiver. ck_usbo_48m is available as soon as the PLL is enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- No changes in v3. Changes in v2: - fix COMMON_CLK dependency issue reported by kernel test robot --- drivers/phy/st/Kconfig | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 65 ++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig index b32f44ff9033..3fc3d0781fb8 100644 --- a/drivers/phy/st/Kconfig +++ b/drivers/phy/st/Kconfig @@ -36,6 +36,7 @@ config PHY_STIH407_USB config PHY_STM32_USBPHYC tristate "STMicroelectronics STM32 USB HS PHY Controller driver" depends on ARCH_STM32 || COMPILE_TEST + depends on COMMON_CLK select GENERIC_PHY help Enable this to support the High-Speed USB transceivers that are part diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index d08fbb180e43..c184f4e34584 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -7,6 +7,7 @@ */ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/iopoll.h> #include <linux/kernel.h> @@ -70,6 +71,7 @@ struct stm32_usbphyc { struct regulator *vdda1v1; struct regulator *vdda1v8; atomic_t n_pll_cons; + struct clk_hw clk48_hw; int switch_setup; }; @@ -295,6 +297,61 @@ static const struct phy_ops stm32_usbphyc_phy_ops = { .owner = THIS_MODULE, }; +static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + return stm32_usbphyc_pll_enable(usbphyc); +} + +static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + stm32_usbphyc_pll_disable(usbphyc); +} + +static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + return 48000000; +} + +static const struct clk_ops usbphyc_clk48_ops = { + .prepare = stm32_usbphyc_clk48_prepare, + .unprepare = stm32_usbphyc_clk48_unprepare, + .recalc_rate = stm32_usbphyc_clk48_recalc_rate, +}; + +static void stm32_usbphyc_clk48_unregister(void *data) +{ + struct stm32_usbphyc *usbphyc = data; + + of_clk_del_provider(usbphyc->dev->of_node); + clk_hw_unregister(&usbphyc->clk48_hw); +} + +static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) +{ + struct device_node *node = usbphyc->dev->of_node; + struct clk_init_data init = { }; + int ret = 0; + + init.name = "ck_usbo_48m"; + init.ops = &usbphyc_clk48_ops; + + usbphyc->clk48_hw.init = &init; + + ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); + if (ret) + clk_hw_unregister(&usbphyc->clk48_hw); + + return ret; +} + static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, u32 utmi_switch) { @@ -473,6 +530,12 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) goto clk_disable; } + ret = stm32_usbphyc_clk48_register(usbphyc); + if (ret) { + dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); + goto clk_disable; + } + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); dev_info(dev, "registered rev:%lu.%lu\n", FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); @@ -497,6 +560,8 @@ static int stm32_usbphyc_remove(struct platform_device *pdev) if (usbphyc->phys[port]->active) stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); + stm32_usbphyc_clk48_unregister(usbphyc); + clk_disable_unprepare(usbphyc->clk); return 0; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-09 8:28 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-09 8:26 [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property Amelie Delaunay 2021-03-09 8:26 ` [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock Amelie Delaunay -- strict thread matches above, loose matches on Subject: below -- 2021-03-04 16:04 [RESEND PATCH v3 0/2] STM32 USBPHYC ck_usbo_48m clock provider Amelie Delaunay 2021-03-04 16:04 ` [RESEND PATCH v3 2/2] phy: stm32: register usbphyc as clock provider of ck_usbo_48m clock Amelie Delaunay
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).