* [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node
@ 2021-03-09 13:05 Vignesh Raghavendra
2021-03-09 13:05 ` [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node Vignesh Raghavendra
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Vignesh Raghavendra @ 2021-03-09 13:05 UTC (permalink / raw)
To: Nishanth Menon, Tero Kristo
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel,
Vignesh Raghavendra, Pratyush Yadav, Lokesh Vutla
AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem
(FSS). Add DT entry for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 5f85950daef7..bcec4fa444b5 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -402,4 +402,29 @@ sdhci1: mmc@fa00000 {
ti,otap-del-sel-ddr50 = <0x9>;
ti,clkbuf-sel = <0x7>;
};
+
+ fss: bus@fc00000 {
+ compatible = "simple-bus";
+ reg = <0x00 0x0fc00000 0x00 0x70000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@fc40000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x0fc40000 0x00 0x100>,
+ <0x05 0x00000000 0x01 0x00000000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&k3_clks 75 6>;
+ assigned-clocks = <&k3_clks 75 6>;
+ assigned-clock-parents = <&k3_clks 75 7>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+ };
+ };
};
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node
2021-03-09 13:05 [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Vignesh Raghavendra
@ 2021-03-09 13:05 ` Vignesh Raghavendra
2021-03-09 13:17 ` Pratyush Yadav
2021-03-09 13:17 ` [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Pratyush Yadav
2021-03-10 17:34 ` Vignesh Raghavendra
2 siblings, 1 reply; 5+ messages in thread
From: Vignesh Raghavendra @ 2021-03-09 13:05 UTC (permalink / raw)
To: Nishanth Menon, Tero Kristo
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel,
Vignesh Raghavendra, Pratyush Yadav, Lokesh Vutla
Both AM64 EVM and SK have a 512Mb S28HS512T Octal SPI NOR flash.
Add DT node for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
Bootlog:
SK: https://pastebin.ubuntu.com/p/gvxg7cFrXH/
EVM: https://pastebin.ubuntu.com/p/jb39GqkB78/
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 36 +++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 36 +++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 1f1787750fef..7dd8e94b108d 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -133,6 +133,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
>;
};
+
+ ospi0_pins_default: ospi0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+ AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+ AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+ AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+ AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+ AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+ AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+ AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+ AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+ >;
+ };
};
&main_uart0 {
@@ -244,3 +260,23 @@ &sdhci1 {
ti,driver-strength-ohm = <50>;
disable-wp;
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index aa6ca4c49153..fc27470fc083 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -90,6 +90,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
>;
};
+
+ ospi0_pins_default: ospi0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+ AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+ AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+ AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+ AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+ AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+ AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+ AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+ AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+ >;
+ };
};
&mcu_uart0 {
@@ -171,3 +187,23 @@ &sdhci1 {
ti,driver-strength-ohm = <50>;
disable-wp;
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node
2021-03-09 13:05 [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Vignesh Raghavendra
2021-03-09 13:05 ` [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node Vignesh Raghavendra
@ 2021-03-09 13:17 ` Pratyush Yadav
2021-03-10 17:34 ` Vignesh Raghavendra
2 siblings, 0 replies; 5+ messages in thread
From: Pratyush Yadav @ 2021-03-09 13:17 UTC (permalink / raw)
To: Vignesh Raghavendra
Cc: Nishanth Menon, Tero Kristo, Rob Herring, linux-arm-kernel,
devicetree, linux-kernel, Lokesh Vutla
On 09/03/21 06:35PM, Vignesh Raghavendra wrote:
> AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem
> (FSS). Add DT entry for the same.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5f85950daef7..bcec4fa444b5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -402,4 +402,29 @@ sdhci1: mmc@fa00000 {
> ti,otap-del-sel-ddr50 = <0x9>;
> ti,clkbuf-sel = <0x7>;
> };
> +
> + fss: bus@fc00000 {
> + compatible = "simple-bus";
> + reg = <0x00 0x0fc00000 0x00 0x70000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + ospi0: spi@fc40000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x0fc40000 0x00 0x100>,
> + <0x05 0x00000000 0x01 0x00000000>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + clocks = <&k3_clks 75 6>;
> + assigned-clocks = <&k3_clks 75 6>;
> + assigned-clock-parents = <&k3_clks 75 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
> + };
> + };
> };
> --
> 2.30.1
>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node
2021-03-09 13:05 ` [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node Vignesh Raghavendra
@ 2021-03-09 13:17 ` Pratyush Yadav
0 siblings, 0 replies; 5+ messages in thread
From: Pratyush Yadav @ 2021-03-09 13:17 UTC (permalink / raw)
To: Vignesh Raghavendra
Cc: Nishanth Menon, Tero Kristo, Rob Herring, linux-arm-kernel,
devicetree, linux-kernel, Lokesh Vutla
On 09/03/21 06:35PM, Vignesh Raghavendra wrote:
> Both AM64 EVM and SK have a 512Mb S28HS512T Octal SPI NOR flash.
> Add DT node for the same.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
> ---
>
> Bootlog:
>
> SK: https://pastebin.ubuntu.com/p/gvxg7cFrXH/
> EVM: https://pastebin.ubuntu.com/p/jb39GqkB78/
>
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 36 +++++++++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 36 +++++++++++++++++++++++++
> 2 files changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index 1f1787750fef..7dd8e94b108d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -133,6 +133,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
> AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
> >;
> };
> +
> + ospi0_pins_default: ospi0-pins-default {
> + pinctrl-single,pins = <
> + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
> + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
> + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
> + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
> + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
> + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
> + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
> + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
> + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
> + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
> + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
> + >;
> + };
> };
>
> &main_uart0 {
> @@ -244,3 +260,23 @@ &sdhci1 {
> ti,driver-strength-ohm = <50>;
> disable-wp;
> };
> +
> +&ospi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ospi0_pins_default>;
> +
> + flash@0{
> + compatible = "jedec,spi-nor";
> + reg = <0x0>;
> + spi-tx-bus-width = <8>;
> + spi-rx-bus-width = <8>;
> + spi-max-frequency = <25000000>;
> + cdns,tshsl-ns = <60>;
> + cdns,tsd2d-ns = <60>;
> + cdns,tchsh-ns = <60>;
> + cdns,tslch-ns = <60>;
> + cdns,read-delay = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index aa6ca4c49153..fc27470fc083 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -90,6 +90,22 @@ AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
> AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
> >;
> };
> +
> + ospi0_pins_default: ospi0-pins-default {
> + pinctrl-single,pins = <
> + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
> + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
> + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
> + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
> + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
> + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
> + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
> + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
> + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
> + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
> + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
> + >;
> + };
> };
>
> &mcu_uart0 {
> @@ -171,3 +187,23 @@ &sdhci1 {
> ti,driver-strength-ohm = <50>;
> disable-wp;
> };
> +
> +&ospi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ospi0_pins_default>;
> +
> + flash@0{
> + compatible = "jedec,spi-nor";
> + reg = <0x0>;
> + spi-tx-bus-width = <8>;
> + spi-rx-bus-width = <8>;
> + spi-max-frequency = <25000000>;
> + cdns,tshsl-ns = <60>;
> + cdns,tsd2d-ns = <60>;
> + cdns,tchsh-ns = <60>;
> + cdns,tslch-ns = <60>;
> + cdns,read-delay = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> --
> 2.30.1
>
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node
2021-03-09 13:05 [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Vignesh Raghavendra
2021-03-09 13:05 ` [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node Vignesh Raghavendra
2021-03-09 13:17 ` [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Pratyush Yadav
@ 2021-03-10 17:34 ` Vignesh Raghavendra
2 siblings, 0 replies; 5+ messages in thread
From: Vignesh Raghavendra @ 2021-03-10 17:34 UTC (permalink / raw)
To: Nishanth Menon, Tero Kristo
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel,
Pratyush Yadav, Lokesh Vutla
Hi Nishanth
On 3/9/21 6:35 PM, Vignesh Raghavendra wrote:
> AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem
> (FSS). Add DT entry for the same.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
Please ignore the series. I see some instabilities in my testing... Will
repost once I have addressed them. Sorry for the noise.
Regards
Vignesh
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5f85950daef7..bcec4fa444b5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -402,4 +402,29 @@ sdhci1: mmc@fa00000 {
> ti,otap-del-sel-ddr50 = <0x9>;
> ti,clkbuf-sel = <0x7>;
> };
> +
> + fss: bus@fc00000 {
> + compatible = "simple-bus";
> + reg = <0x00 0x0fc00000 0x00 0x70000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + ospi0: spi@fc40000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x0fc40000 0x00 0x100>,
> + <0x05 0x00000000 0x01 0x00000000>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + clocks = <&k3_clks 75 6>;
> + assigned-clocks = <&k3_clks 75 6>;
> + assigned-clock-parents = <&k3_clks 75 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
> + };
> + };
> };
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-03-10 17:36 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-09 13:05 [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Vignesh Raghavendra
2021-03-09 13:05 ` [PATCH 2/2] arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node Vignesh Raghavendra
2021-03-09 13:17 ` Pratyush Yadav
2021-03-09 13:17 ` [PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node Pratyush Yadav
2021-03-10 17:34 ` Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).