* [PATCH] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
@ 2021-04-12 6:24 Primoz Fiser
2021-04-12 6:24 ` Primoz Fiser
0 siblings, 1 reply; 3+ messages in thread
From: Primoz Fiser @ 2021-04-12 6:24 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-arm-kernel, linux-kernel, Primoz Fiser
Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.
Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f28a96fcf23e..3f262e8ebf7f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -316,8 +316,8 @@ pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
>;
};
@@ -404,6 +404,7 @@ ®_soc {
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
status = "disabled";
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
2021-04-12 6:24 [PATCH] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Primoz Fiser
@ 2021-04-12 6:24 ` Primoz Fiser
2021-05-13 3:44 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Primoz Fiser @ 2021-04-12 6:24 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-arm-kernel, linux-kernel, Primoz Fiser
Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.
Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f28a96fcf23e..3f262e8ebf7f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -316,8 +316,8 @@ pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
>;
};
@@ -404,6 +404,7 @@ ®_soc {
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
status = "disabled";
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
2021-04-12 6:24 ` Primoz Fiser
@ 2021-05-13 3:44 ` Shawn Guo
0 siblings, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2021-05-13 3:44 UTC (permalink / raw)
To: Primoz Fiser
Cc: Rob Herring, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, devicetree, linux-arm-kernel,
linux-kernel
On Mon, Apr 12, 2021 at 08:24:50AM +0200, Primoz Fiser wrote:
> Serial interface uart3 on phyFLEX board is capable of 5-wire connection
> including signals RTS and CTS for hardware flow control.
>
> Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
> missing property "uart-has-rtscts" to allow serial interface to be
> configured and used with the hardware flow control.
>
> Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-05-13 3:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-12 6:24 [PATCH] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Primoz Fiser
2021-04-12 6:24 ` Primoz Fiser
2021-05-13 3:44 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).