[PATCHv2 0/3] Fix .buf_prepare

[PATCHv2 0/3] Fix .buf_prepare

[Andrzej Pietrasiewicz]

Drivers should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver.

Andrzej Pietrasiewicz (2):
  media: hantro: Fix .buf_prepare
  media: cedrus: Fix .buf_prepare

Ezequiel Garcia (1):
  media: rkvdec: Fix .buf_prepare

 drivers/staging/media/hantro/hantro_v4l2.c        |  9 ++++++++-
 drivers/staging/media/rkvdec/rkvdec.c             | 10 +++++++++-
 drivers/staging/media/sunxi/cedrus/cedrus_video.c |  8 +++++++-
 3 files changed, 24 insertions(+), 3 deletions(-)


base-commit: 0b276e470a4d43e1365d3eb53c608a3d208cabd4
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv2 1/3] media: rkvdec: Fix .buf_prepare

[Andrzej Pietrasiewicz]

From: Ezequiel Garcia <ezequiel@collabora.com>

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in rkvdec-h264.c.

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
[Changed the comment and used V4L2_TYPE_IS_CAPTURE macro]
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
---
 drivers/staging/media/rkvdec/rkvdec.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index d821661d30f3..cd65ad2af8d4 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -481,7 +481,15 @@ static int rkvdec_buf_prepare(struct vb2_buffer *vb)
 		if (vb2_plane_size(vb, i) < sizeimage)
 			return -EINVAL;
 	}
-	vb2_set_plane_payload(vb, 0, f->fmt.pix_mp.plane_fmt[0].sizeimage);
+
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, f->fmt.pix_mp.plane_fmt[0].sizeimage);
+
 	return 0;
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv2 2/3] media: hantro: Fix .buf_prepare

[Andrzej Pietrasiewicz]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in hantro_g1_h264_dec.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
---
 drivers/staging/media/hantro/hantro_v4l2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
index 1bc118e375a1..7ccc6405036a 100644
--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -639,7 +639,14 @@ static int hantro_buf_prepare(struct vb2_buffer *vb)
 	ret = hantro_buf_plane_check(vb, pix_fmt);
 	if (ret)
 		return ret;
-	vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+
 	return 0;
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv2 3/3] media: cedrus: Fix .buf_prepare

[Andrzej Pietrasiewicz]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in cedrus_h264.c or cedrus_vp8.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..bf731caf2ed5 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -457,7 +457,13 @@ static int cedrus_buf_prepare(struct vb2_buffer *vb)
 	if (vb2_plane_size(vb, 0) < pix_fmt->sizeimage)
 		return -EINVAL;
 
-	vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
 
 	return 0;
 }
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel