* [PATCH] ARM: dts: ixp4xx: Add PCI hosts
@ 2021-05-10 21:40 Linus Walleij
0 siblings, 0 replies; only message in thread
From: Linus Walleij @ 2021-05-10 21:40 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Linus Walleij, Zoltan HERPAI, Raylynn Knight
This adds a basic PCI host definition to the base device
tree for IXP4xx and then further details it in the 42x
and 43x device tree include, also the specific target
devices NSLU2 and GW2358 get proper PCI swizzling
defined.
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../boot/dts/intel-ixp42x-linksys-nslu2.dts | 27 +++++++++++
arch/arm/boot/dts/intel-ixp42x.dtsi | 4 ++
.../dts/intel-ixp43x-gateworks-gw2358.dts | 46 +++++++++++++++++++
arch/arm/boot/dts/intel-ixp43x.dtsi | 4 ++
arch/arm/boot/dts/intel-ixp4xx.dtsi | 36 +++++++++++++++
5 files changed, 117 insertions(+)
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 8fcd95805ff4..b1bcf288a562 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -106,4 +106,31 @@ partitions {
fis-index-block = <0x3f>;
};
};
+
+ soc {
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+ * We have slots (IDSEL) 1, 2 and 3.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 8 3>, /* INT D on slot 2 is irq 8 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x1800 0 0 4 &gpio0 8 3>; /* INT D on slot 3 is irq 8 */
+ };
+ };
};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index a9622ca850cc..5fa063ed396c 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -7,6 +7,10 @@
/ {
soc {
+ pci@c0000000 {
+ compatible = "intel,ixp42x-pci";
+ };
+
interrupt-controller@c8003000 {
compatible = "intel,ixp42x-interrupt";
};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index 5e1544ea5f82..87fecc5248e5 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -91,4 +91,50 @@ partitions {
fis-index-block = <0xff>;
};
};
+
+ soc {
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * In the boardfile for the Cambria from OpenWRT the interrupts
+ * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+ * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+ * connected to IRQ 10 etc. I find this highly unlikely so I
+ * have instead assumed that they are rotated (swizzled) like
+ * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 3>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 3>, /* INT D on slot 3 is irq 9 */
+ /* IDSEL 6 */
+ <0x3000 0 0 1 &gpio0 10 3>, /* INT A on slot 3 is irq 10 */
+ <0x3000 0 0 2 &gpio0 9 3>, /* INT B on slot 3 is irq 9 */
+ <0x3000 0 0 3 &gpio0 8 3>, /* INT C on slot 3 is irq 8 */
+ <0x3000 0 0 4 &gpio0 11 3>, /* INT D on slot 3 is irq 11 */
+ /* IDSEL 15 */
+ <0x7800 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
+ <0x7800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x7800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x7800 0 0 4 &gpio0 9 3>; /* INT D on slot 3 is irq 9 */
+ };
+ };
};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
index 494fb2ff57a0..1d0817c6e3f9 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -8,6 +8,10 @@
/ {
soc {
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ };
+
interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
index d4a09584f417..52ba8e4a49cc 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -20,6 +20,42 @@ qmgr: queue-manager@60000000 {
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
};
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ reg = <0xc0000000 0x1000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+
+ ranges =
+ /*
+ * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+ * done in 4 chunks of 16MB each.
+ */
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ /* 64KB I/O space at 0x4c000000 */
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+ /*
+ * This needs to map to the start of physical memory so
+ * PCI devices can see all (hopefully) memory. This is done
+ * using 4 1:1 16MB windows, so the RAM should not be more than
+ * 64 MB for this to work. If your memory is anywhere else
+ * than at 0x0 you need to alter this.
+ */
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ /* Each unique DTS using PCI must specify the swizzling */
+ };
+
uart0: serial@c8000000 {
compatible = "intel,xscale-uart";
reg = <0xc8000000 0x1000>;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-05-11 9:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-10 21:40 [PATCH] ARM: dts: ixp4xx: Add PCI hosts Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).