* [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
2021-05-18 16:56 [PATCH v6 0/4] convert grf.txt to YAML Johan Jonker
@ 2021-05-18 16:56 ` Johan Jonker
2021-05-19 15:19 ` Rob Herring
2021-05-31 8:35 ` Vinod Koul
2021-05-18 16:56 ` [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Johan Jonker @ 2021-05-18 16:56 UTC (permalink / raw)
To: heiko
Cc: robh+dt, kishon, vkoul, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changed V6
remove some #phy-cells
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 --------------
.../devicetree/bindings/phy/rockchip-usb-phy.yaml | 81 ++++++++++++++++++++++
2 files changed, 81 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046..000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000..f0fc8275d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
2021-05-18 16:56 ` [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt " Johan Jonker
@ 2021-05-19 15:19 ` Rob Herring
2021-05-31 8:35 ` Vinod Koul
1 sibling, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-19 15:19 UTC (permalink / raw)
To: Johan Jonker
Cc: heiko, Kishon Vijay Abraham I, Vinod, linux-phy,
open list:ARM/Rockchip SoC...,
devicetree, linux-arm-kernel, linux-kernel
On Tue, May 18, 2021 at 11:57 AM Johan Jonker <jbx6244@gmail.com> wrote:
>
> Current dts files with Rockchip 'usbphy' nodes are manually verified.
> In order to automate this process rockchip-usb-phy.txt has to be
> converted to YAML.
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>
> Changed V6
> remove some #phy-cells
> ---
> .../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 --------------
> .../devicetree/bindings/phy/rockchip-usb-phy.yaml | 81 ++++++++++++++++++++++
> 2 files changed, 81 insertions(+), 52 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
2021-05-18 16:56 ` [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt " Johan Jonker
2021-05-19 15:19 ` Rob Herring
@ 2021-05-31 8:35 ` Vinod Koul
1 sibling, 0 replies; 9+ messages in thread
From: Vinod Koul @ 2021-05-31 8:35 UTC (permalink / raw)
To: Johan Jonker
Cc: heiko, robh+dt, kishon, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
On 18-05-21, 18:56, Johan Jonker wrote:
> Current dts files with Rockchip 'usbphy' nodes are manually verified.
> In order to automate this process rockchip-usb-phy.txt has to be
> converted to YAML.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
2021-05-18 16:56 [PATCH v6 0/4] convert grf.txt to YAML Johan Jonker
2021-05-18 16:56 ` [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt " Johan Jonker
@ 2021-05-18 16:56 ` Johan Jonker
2021-05-20 0:05 ` Rob Herring
2021-05-31 8:35 ` Vinod Koul
2021-05-18 16:56 ` [PATCH v6 3/4] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2 Johan Jonker
2021-05-18 16:56 ` [PATCH v6 4/4] arm64: " Johan Jonker
3 siblings, 2 replies; 9+ messages in thread
From: Johan Jonker @ 2021-05-18 16:56 UTC (permalink / raw)
To: heiko
Cc: robh+dt, kishon, vkoul, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications. Remove unneeded "#phy-cells" from parent node.
Also sort example.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +++--------
Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 4 ++--
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index fb29ad807..fbe860fff 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -29,9 +29,6 @@ properties:
"#clock-cells":
const: 0
- "#phy-cells":
- const: 0
-
clocks:
maxItems: 1
@@ -119,7 +116,6 @@ required:
- reg
- clock-output-names
- "#clock-cells"
- - "#phy-cells"
- host-port
- otg-port
@@ -130,26 +126,25 @@ examples:
#include <dt-bindings/clock/rk3399-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
clock-names = "phyclk";
clock-output-names = "clk_usbphy0_480m";
#clock-cells = <0>;
- #phy-cells = <0>;
u2phy0_host: host-port {
- #phy-cells = <0>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "linestate";
+ #phy-cells = <0>;
};
u2phy0_otg: otg-port {
- #phy-cells = <0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "otg-bvalid", "otg-id", "linestate";
+ #phy-cells = <0>;
};
};
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 84bdaf88d..43c288708 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -184,7 +184,7 @@ allOf:
- "#size-cells"
patternProperties:
- "usb2-phy@[0-9a-f]+$":
+ "usb2phy@[0-9a-f]+$":
type: object
$ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
@@ -233,7 +233,7 @@ examples:
#phy-cells = <0>;
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
2021-05-18 16:56 ` [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
@ 2021-05-20 0:05 ` Rob Herring
2021-05-31 8:35 ` Vinod Koul
1 sibling, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-20 0:05 UTC (permalink / raw)
To: Johan Jonker
Cc: linux-kernel, heiko, linux-rockchip, linux-phy, linux-arm-kernel,
kishon, devicetree, robh+dt, vkoul
On Tue, 18 May 2021 18:56:56 +0200, Johan Jonker wrote:
> The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
> in phy-provider.yaml has required "#phy-cells" for phy nodes.
> The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
> Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
> notifications. Remove unneeded "#phy-cells" from parent node.
> Also sort example.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
> phy/phy-provider.yaml
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> .../devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +++--------
> Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 4 ++--
> 2 files changed, 5 insertions(+), 10 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
2021-05-18 16:56 ` [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
2021-05-20 0:05 ` Rob Herring
@ 2021-05-31 8:35 ` Vinod Koul
1 sibling, 0 replies; 9+ messages in thread
From: Vinod Koul @ 2021-05-31 8:35 UTC (permalink / raw)
To: Johan Jonker
Cc: heiko, robh+dt, kishon, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
On 18-05-21, 18:56, Johan Jonker wrote:
> The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
> in phy-provider.yaml has required "#phy-cells" for phy nodes.
> The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
> Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
> notifications. Remove unneeded "#phy-cells" from parent node.
> Also sort example.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
> phy/phy-provider.yaml
This fails to apply for me, needs rebase..
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 3/4] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
2021-05-18 16:56 [PATCH v6 0/4] convert grf.txt to YAML Johan Jonker
2021-05-18 16:56 ` [PATCH v6 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt " Johan Jonker
2021-05-18 16:56 ` [PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
@ 2021-05-18 16:56 ` Johan Jonker
2021-05-18 16:56 ` [PATCH v6 4/4] arm64: " Johan Jonker
3 siblings, 0 replies; 9+ messages in thread
From: Johan Jonker @ 2021-05-18 16:56 UTC (permalink / raw)
To: heiko
Cc: robh+dt, kishon, vkoul, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm/boot/dts/rk322x.dtsi | 4 ++--
arch/arm/boot/dts/rv1108.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 5774bc309..cffd7acfb 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -190,7 +190,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@760 {
+ u2phy0: usb2phy@760 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0760 0x0c>;
clocks = <&cru SCLK_OTGPHY0>;
@@ -217,7 +217,7 @@
};
};
- u2phy1: usb2-phy@800 {
+ u2phy1: usb2phy@800 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0800 0x0c>;
clocks = <&cru SCLK_OTGPHY1>;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 884872ca5..9bd0acf3b 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -265,7 +265,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rv1108-usb2phy";
reg = <0x100 0x0c>;
clocks = <&cru SCLK_USBPHY>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 4/4] arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
2021-05-18 16:56 [PATCH v6 0/4] convert grf.txt to YAML Johan Jonker
` (2 preceding siblings ...)
2021-05-18 16:56 ` [PATCH v6 3/4] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2 Johan Jonker
@ 2021-05-18 16:56 ` Johan Jonker
3 siblings, 0 replies; 9+ messages in thread
From: Johan Jonker @ 2021-05-18 16:56 UTC (permalink / raw)
To: heiko
Cc: robh+dt, kishon, vkoul, linux-phy, linux-rockchip, devicetree,
linux-arm-kernel, linux-kernel
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4e243d72e..248ebb61a 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -822,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bc0bdc3d8..8c821acb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -819,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a2eba5357..c1a253507 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1418,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1445,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread