linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jaxson Han <jaxson.han@arm.com>
To: mark.rutland@arm.com, andre.przywara@arm.com
Cc: linux-arm-kernel@lists.infradead.org, wei.chen@arm.com,
	jaxson.han@arm.com
Subject: [boot-wrapper PATCH v2 1/8] Decouple V2M_SYS config by auto-detect dtb node
Date: Fri, 21 May 2021 18:48:00 +0800	[thread overview]
Message-ID: <20210521104807.138269-2-jaxson.han@arm.com> (raw)
In-Reply-To: <20210521104807.138269-1-jaxson.han@arm.com>

An auto-detect switch is added to make it an option to enable/disable
'arm,vexpress-sysreg', because not all platforms support this feature.

But the auto-detection generates the side-effect of printing a warning
message about the missing node:
No matching devices found at ./findbase.pl line 37.

In this case, to drop the warning message, add  "2> /dev/null" at the
end of the findbase.pl call.

Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
 Makefile.am | 4 ++--
 platform.c  | 4 ++++
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Makefile.am b/Makefile.am
index af694b7..ef6b793 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -10,7 +10,7 @@
 # VE
 PHYS_OFFSET	:= $(shell perl -I $(top_srcdir) $(top_srcdir)/findmem.pl $(KERNEL_DTB))
 UART_BASE	:= $(shell perl -I $(top_srcdir) $(top_srcdir)/findbase.pl $(KERNEL_DTB) 0 'arm,pl011')
-SYSREGS_BASE	:= $(shell perl -I $(top_srcdir) $(top_srcdir)/findbase.pl $(KERNEL_DTB) 0 'arm,vexpress-sysreg')
+SYSREGS_BASE	:= $(shell perl -I $(top_srcdir) $(top_srcdir)/findbase.pl $(KERNEL_DTB) 0 'arm,vexpress-sysreg' 2> /dev/null)
 CNTFRQ		:= 0x01800000	# 24Mhz
 
 CPU_IDS		:= $(shell perl -I $(top_srcdir) $(top_srcdir)/findcpuids.pl $(KERNEL_DTB))
@@ -19,7 +19,7 @@ NR_CPUS         := $(shell echo $(CPU_IDS) | tr ',' ' ' | wc -w)
 DEFINES		= -DCNTFRQ=$(CNTFRQ)
 DEFINES		+= -DCPU_IDS=$(CPU_IDS)
 DEFINES		+= -DNR_CPUS=$(NR_CPUS)
-DEFINES		+= -DSYSREGS_BASE=$(SYSREGS_BASE)
+DEFINES		+= $(if $(SYSREGS_BASE), -DSYSREGS_BASE=$(SYSREGS_BASE), )
 DEFINES		+= -DUART_BASE=$(UART_BASE)
 DEFINES		+= -DSTACK_SIZE=256
 
diff --git a/platform.c b/platform.c
index a528a55..d11f568 100644
--- a/platform.c
+++ b/platform.c
@@ -23,10 +23,12 @@
 
 #define PL011(reg)	((void *)UART_BASE + PL011_##reg)
 
+#ifdef SYSREGS_BASE
 #define V2M_SYS_CFGDATA		0xa0
 #define V2M_SYS_CFGCTRL		0xa4
 
 #define V2M_SYS(reg)	((void *)SYSREGS_BASE + V2M_SYS_##reg)
+#endif
 
 static void print_string(const char *str)
 {
@@ -59,6 +61,7 @@ void init_platform(void)
 
 	print_string("Boot-wrapper v0.2\r\n\r\n");
 
+#ifdef SYSREGS_BASE
 	/*
 	 * CLCD output site MB
 	 */
@@ -66,4 +69,5 @@ void init_platform(void)
 	/* START | WRITE | MUXFPGA | SITE_MB */
 	raw_writel((1 << 31) | (1 << 30) | (7 << 20) | (0 << 16),
 				V2M_SYS(CFGCTRL));
+#endif
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-05-21 10:51 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 10:47 [boot-wrapper PATCH v2 0/8] Add Armv8-R AArch64 support Jaxson Han
2021-05-21 10:48 ` Jaxson Han [this message]
2021-05-21 10:48 ` [boot-wrapper PATCH v2 2/8] aarch64: Rename labels and prepare for lower EL booting Jaxson Han
2021-05-24  9:32   ` Andre Przywara
2021-05-25  1:54     ` Jaxson Han
2021-05-21 10:48 ` [boot-wrapper PATCH v2 3/8] aarch64: Remove the redundant setup_stack Jaxson Han
2021-05-24  9:32   ` Andre Przywara
2021-05-21 10:48 ` [boot-wrapper PATCH v2 4/8] aarch64: Prepare for EL1 booting Jaxson Han
2021-05-24  9:32   ` Andre Przywara
2021-05-21 10:48 ` [boot-wrapper PATCH v2 5/8] aarch64: Prepare for lower EL booting Jaxson Han
2021-05-24  9:33   ` Andre Przywara
2021-05-21 10:48 ` [boot-wrapper PATCH v2 6/8] gic-v3: Prepare for gicv3 with EL2 Jaxson Han
2021-05-24  9:33   ` Andre Przywara
2021-05-21 10:48 ` [boot-wrapper PATCH v2 7/8] aarch64: Prepare for booting " Jaxson Han
2021-05-24  9:33   ` Andre Przywara
2021-05-21 10:48 ` [boot-wrapper PATCH v2 8/8] aarch64: Introduce EL2 boot code for Armv8-R AArch64 Jaxson Han
2021-05-24 10:19   ` Andre Przywara
2021-05-25  1:59     ` Jaxson Han

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521104807.138269-2-jaxson.han@arm.com \
    --to=jaxson.han@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=wei.chen@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).