[PATCH AUTOSEL 5.4 01/26] dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()

[PATCH AUTOSEL 5.4 01/26] dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 8982d48af36d2562c0f904736b0fc80efc9f2532 ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/zynqmp_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index d47749a35863..84009c5e0f33 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -467,7 +467,7 @@ static int zynqmp_dma_alloc_chan_resources(struct dma_chan *dchan)
 	struct zynqmp_dma_desc_sw *desc;
 	int i, ret;
 
-	ret = pm_runtime_get_sync(chan->dev);
+	ret = pm_runtime_resume_and_get(chan->dev);
 	if (ret < 0)
 		return ret;
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 06/26] dmaengine: mediatek: free the proper desc in desc_free handler

[Sasha Levin]

From: Guillaume Ranquet <granquet@baylibre.com>

[ Upstream commit 0a2ff58f9f8f95526ecb0ccd7517fefceb96f661 ]

The desc_free handler assumed that the desc we want to free was always
 the current one associated with the channel.

This is seldom the case and this is causing use after free crashes in
 multiple places (tx/rx/terminate...).

  BUG: KASAN: use-after-free in mtk_uart_apdma_rx_handler+0x120/0x304

  Call trace:
   dump_backtrace+0x0/0x1b0
   show_stack+0x24/0x34
   dump_stack+0xe0/0x150
   print_address_description+0x8c/0x55c
   __kasan_report+0x1b8/0x218
   kasan_report+0x14/0x20
   __asan_load4+0x98/0x9c
   mtk_uart_apdma_rx_handler+0x120/0x304
   mtk_uart_apdma_irq_handler+0x50/0x80
   __handle_irq_event_percpu+0xe0/0x210
   handle_irq_event+0x8c/0x184
   handle_fasteoi_irq+0x1d8/0x3ac
   __handle_domain_irq+0xb0/0x110
   gic_handle_irq+0x50/0xb8
   el0_irq_naked+0x60/0x6c

  Allocated by task 3541:
   __kasan_kmalloc+0xf0/0x1b0
   kasan_kmalloc+0x10/0x1c
   kmem_cache_alloc_trace+0x90/0x2dc
   mtk_uart_apdma_prep_slave_sg+0x6c/0x1a0
   mtk8250_dma_rx_complete+0x220/0x2e4
   vchan_complete+0x290/0x340
   tasklet_action_common+0x220/0x298
   tasklet_action+0x28/0x34
   __do_softirq+0x158/0x35c

  Freed by task 3541:
   __kasan_slab_free+0x154/0x224
   kasan_slab_free+0x14/0x24
   slab_free_freelist_hook+0xf8/0x15c
   kfree+0xb4/0x278
   mtk_uart_apdma_desc_free+0x34/0x44
   vchan_complete+0x1bc/0x340
   tasklet_action_common+0x220/0x298
   tasklet_action+0x28/0x34
   __do_softirq+0x158/0x35c

  The buggy address belongs to the object at ffff000063606800
   which belongs to the cache kmalloc-256 of size 256
  The buggy address is located 176 bytes inside of
   256-byte region [ffff000063606800, ffff000063606900)
  The buggy address belongs to the page:
  page:fffffe00016d8180 refcount:1 mapcount:0 mapping:ffff00000302f600 index:0x0 compound_mapcount: 0
  flags: 0xffff00000010200(slab|head)
  raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00000302f600
  raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>

Link: https://lore.kernel.org/r/20210513192642.29446-2-granquet@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mediatek/mtk-uart-apdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-uart-apdma.c b/drivers/dma/mediatek/mtk-uart-apdma.c
index f40051d6aecb..311d7c236d27 100644
--- a/drivers/dma/mediatek/mtk-uart-apdma.c
+++ b/drivers/dma/mediatek/mtk-uart-apdma.c
@@ -131,10 +131,7 @@ static unsigned int mtk_uart_apdma_read(struct mtk_chan *c, unsigned int reg)
 
 static void mtk_uart_apdma_desc_free(struct virt_dma_desc *vd)
 {
-	struct dma_chan *chan = vd->tx.chan;
-	struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
-
-	kfree(c->desc);
+	kfree(container_of(vd, struct mtk_uart_apdma_desc, vd));
 }
 
 static void mtk_uart_apdma_start_tx(struct mtk_chan *c)
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 07/26] dmaengine: mediatek: do not issue a new desc if one is still current

[Sasha Levin]

From: Guillaume Ranquet <granquet@baylibre.com>

[ Upstream commit 2537b40b0a4f61d2c83900744fe89b09076be9c6 ]

Avoid issuing a new desc if one is still being processed as this can
lead to some desc never being marked as completed.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>

Link: https://lore.kernel.org/r/20210513192642.29446-3-granquet@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mediatek/mtk-uart-apdma.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-uart-apdma.c b/drivers/dma/mediatek/mtk-uart-apdma.c
index 311d7c236d27..e420e9f72b3d 100644
--- a/drivers/dma/mediatek/mtk-uart-apdma.c
+++ b/drivers/dma/mediatek/mtk-uart-apdma.c
@@ -204,14 +204,9 @@ static void mtk_uart_apdma_start_rx(struct mtk_chan *c)
 
 static void mtk_uart_apdma_tx_handler(struct mtk_chan *c)
 {
-	struct mtk_uart_apdma_desc *d = c->desc;
-
 	mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_TX_INT_CLR_B);
 	mtk_uart_apdma_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
 	mtk_uart_apdma_write(c, VFF_EN, VFF_EN_CLR_B);
-
-	list_del(&d->vd.node);
-	vchan_cookie_complete(&d->vd);
 }
 
 static void mtk_uart_apdma_rx_handler(struct mtk_chan *c)
@@ -242,9 +237,17 @@ static void mtk_uart_apdma_rx_handler(struct mtk_chan *c)
 
 	c->rx_status = d->avail_len - cnt;
 	mtk_uart_apdma_write(c, VFF_RPT, wg);
+}
 
-	list_del(&d->vd.node);
-	vchan_cookie_complete(&d->vd);
+static void mtk_uart_apdma_chan_complete_handler(struct mtk_chan *c)
+{
+	struct mtk_uart_apdma_desc *d = c->desc;
+
+	if (d) {
+		list_del(&d->vd.node);
+		vchan_cookie_complete(&d->vd);
+		c->desc = NULL;
+	}
 }
 
 static irqreturn_t mtk_uart_apdma_irq_handler(int irq, void *dev_id)
@@ -258,6 +261,7 @@ static irqreturn_t mtk_uart_apdma_irq_handler(int irq, void *dev_id)
 		mtk_uart_apdma_rx_handler(c);
 	else if (c->dir == DMA_MEM_TO_DEV)
 		mtk_uart_apdma_tx_handler(c);
+	mtk_uart_apdma_chan_complete_handler(c);
 	spin_unlock_irqrestore(&c->vc.lock, flags);
 
 	return IRQ_HANDLED;
@@ -363,7 +367,7 @@ static void mtk_uart_apdma_issue_pending(struct dma_chan *chan)
 	unsigned long flags;
 
 	spin_lock_irqsave(&c->vc.lock, flags);
-	if (vchan_issue_pending(&c->vc)) {
+	if (vchan_issue_pending(&c->vc) && !c->desc) {
 		vd = vchan_next_desc(&c->vc);
 		c->desc = to_mtk_uart_apdma_desc(&vd->tx);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 08/26] dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma

[Sasha Levin]

From: Guillaume Ranquet <granquet@baylibre.com>

[ Upstream commit 9041575348b21ade1fb74d790f1aac85d68198c7 ]

As recommended by the doc in:
Documentation/drivers-api/dmaengine/provider.rst

Use GFP_NOWAIT to not deplete the emergency pool.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>

Link: https://lore.kernel.org/r/20210513192642.29446-4-granquet@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mediatek/mtk-uart-apdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/mediatek/mtk-uart-apdma.c b/drivers/dma/mediatek/mtk-uart-apdma.c
index e420e9f72b3d..9c0ea13ca788 100644
--- a/drivers/dma/mediatek/mtk-uart-apdma.c
+++ b/drivers/dma/mediatek/mtk-uart-apdma.c
@@ -349,7 +349,7 @@ static struct dma_async_tx_descriptor *mtk_uart_apdma_prep_slave_sg
 		return NULL;
 
 	/* Now allocate and setup the descriptor */
-	d = kzalloc(sizeof(*d), GFP_ATOMIC);
+	d = kzalloc(sizeof(*d), GFP_NOWAIT);
 	if (!d)
 		return NULL;
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 23/26] recordmcount: Correct st_shndx handling

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit fb780761e7bd9f2e94f5b9a296ead6b35b944206 ]

One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When
SHN_XINDEX, then use .symtab_shndx. Otherwise use 0.

This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX.

Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/
Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com

Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[handle endianness of sym->st_shndx]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/recordmcount.h | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index f9b19524da11..1e9baa5c4fc6 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -192,15 +192,20 @@ static unsigned int get_symindex(Elf_Sym const *sym, Elf32_Word const *symtab,
 				 Elf32_Word const *symtab_shndx)
 {
 	unsigned long offset;
+	unsigned short shndx = w2(sym->st_shndx);
 	int index;
 
-	if (sym->st_shndx != SHN_XINDEX)
-		return w2(sym->st_shndx);
+	if (shndx > SHN_UNDEF && shndx < SHN_LORESERVE)
+		return shndx;
 
-	offset = (unsigned long)sym - (unsigned long)symtab;
-	index = offset / sizeof(*sym);
+	if (shndx == SHN_XINDEX) {
+		offset = (unsigned long)sym - (unsigned long)symtab;
+		index = offset / sizeof(*sym);
 
-	return w(symtab_shndx[index]);
+		return w(symtab_shndx[index]);
+	}
+
+	return 0;
 }
 
 static unsigned int get_shnum(Elf_Ehdr const *ehdr, Elf_Shdr const *shdr0)
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 25/26] net: ll_temac: Add memory-barriers for TX BD access

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit 28d9fab458b16bcd83f9dd07ede3d585c3e1a69e ]

Add a couple of memory-barriers to ensure correct ordering of read/write
access to TX BDs.

In xmit_done, we should ensure that reading the additional BD fields are
only done after STS_CTRL_APP0_CMPLT bit is set.

When xmit_done marks the BD as free by setting APP0=0, we need to ensure
that the other BD fields are reset first, so we avoid racing with the xmit
path, which writes to the same fields.

Finally, making sure to read APP0 of next BD after the current BD, ensures
that we see all available buffers.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 5b8451c58aa4..63aabe051332 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -770,12 +770,15 @@ static void temac_start_xmit_done(struct net_device *ndev)
 	stat = be32_to_cpu(cur_p->app0);
 
 	while (stat & STS_CTRL_APP0_CMPLT) {
+		/* Make sure that the other fields are read after bd is
+		 * released by dma
+		 */
+		rmb();
 		dma_unmap_single(ndev->dev.parent, be32_to_cpu(cur_p->phys),
 				 be32_to_cpu(cur_p->len), DMA_TO_DEVICE);
 		skb = (struct sk_buff *)ptr_from_txbd(cur_p);
 		if (skb)
 			dev_consume_skb_irq(skb);
-		cur_p->app0 = 0;
 		cur_p->app1 = 0;
 		cur_p->app2 = 0;
 		cur_p->app3 = 0;
@@ -784,6 +787,12 @@ static void temac_start_xmit_done(struct net_device *ndev)
 		ndev->stats.tx_packets++;
 		ndev->stats.tx_bytes += be32_to_cpu(cur_p->len);
 
+		/* app0 must be visible last, as it is used to flag
+		 * availability of the bd
+		 */
+		smp_mb();
+		cur_p->app0 = 0;
+
 		lp->tx_bd_ci++;
 		if (lp->tx_bd_ci >= TX_BD_NUM)
 			lp->tx_bd_ci = 0;
@@ -810,6 +819,9 @@ static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
 		if (cur_p->app0)
 			return NETDEV_TX_BUSY;
 
+		/* Make sure to read next bd app0 after this one */
+		rmb();
+
 		tail++;
 		if (tail >= TX_BD_NUM)
 			tail = 0;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 26/26] net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit f6396341194234e9b01cd7538bc2c6ac4501ab14 ]

As documented in Documentation/networking/driver.rst, the ndo_start_xmit
method must not return NETDEV_TX_BUSY under any normal circumstances, and
as recommended, we simply stop the tx queue in advance, when there is a
risk that the next xmit would cause a NETDEV_TX_BUSY return.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 63aabe051332..918fdc180cea 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -935,6 +935,11 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	wmb();
 	lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
 
+	if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
+		netdev_info(ndev, "%s -> netif_stop_queue\n", __func__);
+		netif_stop_queue(ndev);
+	}
+
 	return NETDEV_TX_OK;
 }
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel