[PATCH] arm64: dts: rockchip: add thermal fan control to rockpro64

[PATCH] arm64: dts: rockchip: add thermal fan control to rockpro64

[Peter Geis]

The rockpro64 had a fan node since
commit 5882d65c1691 ("arm64: dts: rockchip: Add PWM fan for RockPro64")
however it was never tied into the thermal driver for automatic control.

Add the links to the thermal node to permit the kernel to handle this
automatically.
Borrowed from the (rk3399-khadas-edge.dtsi).

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6bff8db7d33e..687a5afa5d2c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -69,6 +69,7 @@ diy_led: led-1 {
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";
+		cooling-levels = <0 150 200 255>;
 		#cooling-cells = <2>;
 		fan-supply = <&vcc12v_dcin>;
 		pwms = <&pwm1 0 50000 0>;
@@ -245,6 +246,34 @@ &cpu_b1 {
 	cpu-supply = <&vdd_cpu_b>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &emmc_phy {
 	status = "okay";
 };
@@ -281,6 +310,34 @@ &gpu {
 	status = "okay";
 };
 
+&gpu_thermal {
+	trips {
+		gpu_warm: gpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		gpu_hot: gpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&gpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&gpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel