linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Kefeng Wang <wangkefeng.wang@huawei.com>
To: <linux-kernel@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	"Frank Rowand" <frowand.list@gmail.com>
Cc: <devicetree@vger.kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Kefeng Wang <wangkefeng.wang@huawei.com>,
	Ruizhe Lin <linruizhe@huawei.com>
Subject: [PATCH 3/3] amba: Properly handle device probe without IRQ domain
Date: Mon, 16 Aug 2021 15:46:19 +0800	[thread overview]
Message-ID: <20210816074619.177383-4-wangkefeng.wang@huawei.com> (raw)
In-Reply-To: <20210816074619.177383-1-wangkefeng.wang@huawei.com>

of_amba_device_create() uses irq_of_parse_and_map() to translate
a DT interrupt specification into a Linux virtual interrupt number.

But it doesn't properly handle the case where the interrupt controller
is not yet available, eg, when pl011 interrupt is connected to MBIGEN
interrupt controller, because the mbigen initialization is too late,
which will lead to no IRQ due to no IRQ domain found, log is shown below,
  "irq: no irq domain found for uart0 !"

use of_irq_get() to return -EPROBE_DEFER as above, and in the function
amba_device_try_add()/amba_device_add(), it will properly handle in such
case, also return 0 in other fail cases to be consistent as before.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reported-by: Ruizhe Lin <linruizhe@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 drivers/amba/bus.c    | 27 +++++++++++++++++++++++++++
 drivers/of/platform.c |  6 +-----
 2 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 36f2f42c8014..720aa6cdd402 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -19,6 +19,7 @@
 #include <linux/clk/clk-conf.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -371,12 +372,38 @@ static void amba_device_release(struct device *dev)
 	kfree(d);
 }
 
+static int of_amba_device_decode_irq(struct amba_device *dev)
+{
+	struct device_node *node = dev->dev.of_node;
+	int i, irq = 0;
+
+	if (IS_ENABLED(CONFIG_OF_IRQ) && node) {
+		/* Decode the IRQs and address ranges */
+		for (i = 0; i < AMBA_NR_IRQS; i++) {
+			irq = of_irq_get(node, i);
+			if (irq < 0) {
+				if (irq == -EPROBE_DEFER)
+					return irq;
+				irq = 0;
+			}
+
+			dev->irq[i] = irq;
+		}
+	}
+
+	return 0;
+}
+
 static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
 {
 	u32 size;
 	void __iomem *tmp;
 	int i, ret;
 
+	ret = of_amba_device_decode_irq(dev);
+	if (ret)
+		goto err_out;
+
 	ret = request_resource(parent, &dev->res);
 	if (ret)
 		goto err_out;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 74afbb7a4f5e..32d5ff8df747 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -222,7 +222,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 {
 	struct amba_device *dev;
 	const void *prop;
-	int i, ret;
+	int ret;
 
 	pr_debug("Creating amba device %pOF\n", node);
 
@@ -253,10 +253,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 	if (prop)
 		dev->periphid = of_read_ulong(prop, 1);
 
-	/* Decode the IRQs and address ranges */
-	for (i = 0; i < AMBA_NR_IRQS; i++)
-		dev->irq[i] = irq_of_parse_and_map(node, i);
-
 	ret = of_address_to_resource(node, 0, &dev->res);
 	if (ret) {
 		pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-08-16  7:46 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-16  7:46 [PATCH 0/3] amba: Properly handle device probe without IRQ domain Kefeng Wang
2021-08-16  7:46 ` [PATCH 1/3] amba: Drop unused functions about APB/AHB devices add Kefeng Wang
2021-08-16  7:46 ` [PATCH 2/3] Revert "ARM: amba: make use of -1 IRQs warn" Kefeng Wang
2021-08-16  7:46 ` Kefeng Wang [this message]
2021-08-24 20:05   ` [PATCH 3/3] amba: Properly handle device probe without IRQ domain Rob Herring
2021-08-24 20:08     ` Saravana Kannan
2021-08-25  4:05       ` Kefeng Wang
2021-08-25  8:04         ` Saravana Kannan
2021-08-25  8:39           ` Kefeng Wang
2021-08-26  2:45           ` Kefeng Wang
2021-08-26  4:45             ` Saravana Kannan
2021-08-26  6:22               ` Kefeng Wang
     [not found]               ` <df8e7756-8b0d-d7de-a9ff-3f6eb0ffa8a5@huawei.com>
2021-08-27  0:04                 ` [BUG] amba: Remove deferred device addition Saravana Kannan
     [not found]                   ` <85b28900-5f42-b997-2ded-0b952bc2a03e@huawei.com>
2021-08-27 19:09                     ` Saravana Kannan
2021-08-28  1:09                       ` Kefeng Wang
2021-09-09  3:30                         ` Saravana Kannan
2021-09-10  7:59                           ` Kefeng Wang
2022-07-05 19:25                             ` Saravana Kannan
2022-08-27 10:26                               ` Leizhen (ThunderTown)
2021-08-25 12:33         ` [PATCH 3/3] amba: Properly handle device probe without IRQ domain Rob Herring
2021-08-25 14:41           ` Kefeng Wang
2021-08-17 22:27 ` [PATCH 0/3] " Rob Herring
2021-08-23  2:19   ` Kefeng Wang
2021-08-23  9:05     ` Russell King (Oracle)
2021-08-23 10:57       ` Kefeng Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210816074619.177383-4-wangkefeng.wang@huawei.com \
    --to=wangkefeng.wang@huawei.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=linruizhe@huawei.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).