[PATCH 0/2] Use v4l2_info/v4l2_warn/v4l2_dbg for log

[PATCH 0/2] Use v4l2_info/v4l2_warn/v4l2_dbg for log

[Jammy Huang]

In this seris, v4l2_xxx log macro will be adapted.
With v4l2_dbg, the debug level can be set with the module parameter
called debug. In this way, we won't have to see all debug logs together.
To many log could have bad influence on the rate to reproduce some
issues as well.

Some logs are added, and more is coming for aspeed-format.

Jammy Huang (2):
  media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log
  media: aspeed: add more debug log messages

 drivers/media/platform/aspeed-video.c | 64 ++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 17 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log

[Jammy Huang]

The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
  0: off
  1: info
  2: debug
  3: register operations

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
 drivers/media/platform/aspeed-video.c | 40 +++++++++++++++------------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index f5c40d6b4ece..6af57467b6d4 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -30,6 +30,7 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-dma-contig.h>
+#include <linux/videodev2.h>
 
 #define DEVICE_NAME			"aspeed-video"
 
@@ -390,6 +391,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
 	},
 };
 
+static unsigned int debug;
+
 static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
 {
 	int i;
@@ -437,23 +440,23 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
 	t &= ~clear;
 	t |= bits;
 	writel(t, video->base + reg);
-	dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "update %03x[%08x -> %08x]\n",
+		 reg, before, readl(video->base + reg));
 }
 
 static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
 {
 	u32 t = readl(video->base + reg);
 
-	dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
+	v4l2_dbg(3, debug, &video->v4l2_dev, "read %03x[%08x]\n", reg, t);
 	return t;
 }
 
 static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
 {
 	writel(val, video->base + reg);
-	dev_dbg(video->dev, "write %03x[%08x]\n", reg,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "write %03x[%08x]\n", reg,
+		 readl(video->base + reg));
 }
 
 static void update_perf(struct aspeed_video_perf *p)
@@ -474,13 +477,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 	u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
 
 	if (video->v4l2_input_status) {
-		dev_dbg(video->dev, "No signal; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
 		return 0;
 	}
 
 	if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
 	    !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
-		dev_dbg(video->dev, "Engine busy; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n");
 		return -EBUSY;
 	}
 
@@ -489,7 +492,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 				       struct aspeed_video_buffer, link);
 	if (!buf) {
 		spin_unlock_irqrestore(&video->lock, flags);
-		dev_dbg(video->dev, "No buffers; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n");
 		return -EPROTO;
 	}
 
@@ -569,7 +572,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
 
 static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 {
-	dev_dbg(video->dev, "Resolution changed; resetting\n");
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Resolution changed; resetting\n");
 
 	set_bit(VIDEO_RES_CHANGE, &video->flags);
 	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
@@ -770,8 +773,8 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
 	aspeed_video_write(video, VE_STREAM_BUF_SIZE,
 			   compression_buffer_size_reg);
 
-	dev_dbg(video->dev, "Max compressed size: %x\n",
-		video->max_compressed_size);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Max compressed size: %#x\n",
+		 video->max_compressed_size);
 }
 
 #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
@@ -808,7 +811,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      res_check(video),
 						      MODE_DETECT_TIMEOUT);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; first mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n");
 			clear_bit(VIDEO_RES_DETECT, &video->flags);
 			return;
 		}
@@ -822,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      MODE_DETECT_TIMEOUT);
 		clear_bit(VIDEO_RES_DETECT, &video->flags);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; second mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n");
 			return;
 		}
 
@@ -856,7 +859,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	} while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
 
 	if (invalid_resolution) {
-		dev_dbg(video->dev, "Invalid resolution detected\n");
+		v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n");
 		return;
 	}
 
@@ -873,8 +876,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	aspeed_video_update(video, VE_SEQ_CTRL, 0,
 			    VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
 
-	dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
-		det->height);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
+		 det->width, det->height);
 }
 
 static void aspeed_video_set_resolution(struct aspeed_video *video)
@@ -1501,7 +1504,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
 				!test_bit(VIDEO_FRAME_INPRG, &video->flags),
 				STOP_TIMEOUT);
 	if (!rc) {
-		dev_dbg(video->dev, "Timed out when stopping streaming\n");
+		v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n");
 
 		/*
 		 * Need to force stop any DMA and try and get HW into a good
@@ -1851,6 +1854,9 @@ static struct platform_driver aspeed_video_driver = {
 
 module_platform_driver(aspeed_video_driver);
 
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0=off,1=info,2=debug,3=reg ops)");
+
 MODULE_DESCRIPTION("ASPEED Video Engine Driver");
 MODULE_AUTHOR("Eddie James");
 MODULE_LICENSE("GPL v2");
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] media: aspeed: add more debug log messages

[Jammy Huang]

The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
 drivers/media/platform/aspeed-video.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 6af57467b6d4..e8dd0a7ebfc7 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -461,12 +461,17 @@ static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
 
 static void update_perf(struct aspeed_video_perf *p)
 {
+	struct aspeed_video *v = container_of(p, struct aspeed_video,
+					      perf);
+
 	p->duration =
 		ktime_to_ms(ktime_sub(ktime_get(),  p->last_sample));
 	p->totaltime += p->duration;
 
 	p->duration_max = max(p->duration, p->duration_max);
 	p->duration_min = min(p->duration, p->duration_min);
+	v4l2_dbg(2, debug, &v->v4l2_dev, "time consumed: %d ms\n",
+		 p->duration);
 }
 
 static int aspeed_video_start_frame(struct aspeed_video *video)
@@ -597,6 +602,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 	struct aspeed_video *video = arg;
 	u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
 
+	v4l2_dbg(2, debug, &video->v4l2_dev, "irq sts=%#x %s%s%s%s\n", sts,
+		 sts & VE_INTERRUPT_MODE_DETECT_WD ? ", unlock" : "",
+		 sts & VE_INTERRUPT_MODE_DETECT ? ", lock" : "",
+		 sts & VE_INTERRUPT_CAPTURE_COMPLETE ? ", capture-done" : "",
+		 sts & VE_INTERRUPT_COMP_COMPLETE ? ", comp-done" : "");
+
 	/*
 	 * Resolution changed or signal was lost; reset the engine and
 	 * re-initialize
@@ -910,6 +921,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 
 	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
 	if (size < DIRECT_FETCH_THRESHOLD) {
+		v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
 		aspeed_video_write(video, VE_TGS_0,
 				   FIELD_PREP(VE_TGS_FIRST,
 					      video->frame_left - 1) |
@@ -921,6 +933,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 					      video->frame_bottom + 1));
 		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
 	} else {
+		v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
 		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
 	}
 
@@ -937,6 +950,10 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 		if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
 			goto err_mem;
 
+		v4l2_dbg(1, debug, &video->v4l2_dev, "src buf0 addr(%#x) size(%d)\n",
+			 video->srcs[0].dma, video->srcs[0].size);
+		v4l2_dbg(1, debug, &video->v4l2_dev, "src buf1 addr(%#x) size(%d)\n",
+			 video->srcs[1].dma, video->srcs[1].size);
 		aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
 		aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
 	}
@@ -1201,6 +1218,9 @@ static int aspeed_video_set_dv_timings(struct file *file, void *fh,
 
 	timings->type = V4L2_DV_BT_656_1120;
 
+	v4l2_dbg(1, debug, &video->v4l2_dev, "set new timings(%dx%d)\n",
+		 timings->bt.width, timings->bt.height);
+
 	return 0;
 }
 
@@ -1383,6 +1403,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
 			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
 		};
 
+		v4l2_dbg(1, debug, &video->v4l2_dev, "fire source change event\n");
 		v4l2_event_queue(&video->vdev, &ev);
 	} else if (test_bit(VIDEO_STREAMING, &video->flags)) {
 		/* No resolution change so just restart streaming */
@@ -1715,6 +1736,7 @@ static int aspeed_video_init(struct aspeed_video *video)
 		dev_err(dev, "Unable to request IRQ %d\n", irq);
 		return rc;
 	}
+	dev_info(video->dev, "irq %d\n", irq);
 
 	video->eclk = devm_clk_get(dev, "eclk");
 	if (IS_ERR(video->eclk)) {
@@ -1751,6 +1773,8 @@ static int aspeed_video_init(struct aspeed_video *video)
 		rc = -ENOMEM;
 		goto err_release_reserved_mem;
 	}
+	dev_info(video->dev, "alloc mem size(%d) at %#x for jpeg header\n",
+		 VE_JPEG_HEADER_SIZE, video->jpeg.dma);
 
 	aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel