* [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222
@ 2022-01-06 5:47 Xianwei Zhao
2022-01-06 10:41 ` Jerome Brunet
0 siblings, 1 reply; 3+ messages in thread
From: Xianwei Zhao @ 2022-01-06 5:47 UTC (permalink / raw)
To: linux-arm-kernel, linux-amlogic, devicetree, linux-kernel
Cc: Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Rob Herring, Xianwei Zhao
Add basic support for the Amlogic S4 based Amlogic AQ222 board:
which describe components as follows: CPU, GIC, IRQ, Timer, UART.
It's capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
V2 -> V3: add of dts board compatible family
V1 -> V2: cleaned up coding style, modify CPU affinity of timer interrups,
and modify GIC reg defintions.
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-s4-s805x2-aq222.dts | 30 ++++++
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 99 +++++++++++++++++++
3 files changed, 130 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..faea74a45994 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644
index 000000000000..a942d7e06d6e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+ model = "Amlogic Meson S4 AQ222 Development Board";
+ compatible = "amlogic,aq222", "amlogic,s4";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_B;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+};
+
+&uart_B {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644
index 000000000000..d7083c93d3d0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ cpus:cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0:cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35","arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ CPU1:cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35","arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ CPU2:cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35","arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ CPU3:cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35","arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@fff01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xfff01000 0 0x1000>,
+ <0x0 0xfff02000 0 0x2000>,
+ <0x0 0xfff04000 0 0x2000>,
+ <0x0 0xfff06000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb4: apb4@fe000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ uart_B: serial@7a000 {
+ compatible = "amlogic,meson-s4-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0x7a000 0x0 0x18>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+ };
+ };
+};
base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222
2022-01-06 5:47 [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222 Xianwei Zhao
@ 2022-01-06 10:41 ` Jerome Brunet
2022-01-06 11:20 ` xianwei.zhao
0 siblings, 1 reply; 3+ messages in thread
From: Jerome Brunet @ 2022-01-06 10:41 UTC (permalink / raw)
To: Xianwei Zhao, linux-arm-kernel, linux-amlogic, devicetree, linux-kernel
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring
On Thu 06 Jan 2022 at 13:47, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
> It's capable of booting up into the serial console.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> V2 -> V3: add of dts board compatible family
> V1 -> V2: cleaned up coding style, modify CPU affinity of timer interrups,
> and modify GIC reg defintions.
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-s4-s805x2-aq222.dts | 30 ++++++
> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 99 +++++++++++++++++++
> 3 files changed, 130 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 5148cd9e5146..faea74a45994 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> new file mode 100644
> index 000000000000..a942d7e06d6e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-s4.dtsi"
> +
> +/ {
> + model = "Amlogic Meson S4 AQ222 Development Board";
> + compatible = "amlogic,aq222", "amlogic,s4";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart_B;
> + };
> +
> + memory@00000000 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> +};
> +
> +&uart_B {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> new file mode 100644
> index 000000000000..d7083c93d3d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + cpus:cpus {
^ space after : ?
Do we need the alias here ?
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0:cpu@0 {
^ space after : ?
Why is the alias uppercase ?
same for the other nodes
> + device_type = "cpu";
> + compatible = "arm,cortex-a35","arm,armv8";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + };
> +
> + CPU1:cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35","arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + };
> +
> + CPU2:cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35","arm,armv8";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + };
> +
> + CPU3:cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35","arm,armv8";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + xtal: xtal-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gic: interrupt-controller@fff01000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x0 0xfff01000 0 0x1000>,
> + <0x0 0xfff02000 0 0x2000>,
> + <0x0 0xfff04000 0 0x2000>,
> + <0x0 0xfff06000 0 0x2000>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + apb4: apb4@fe000000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xfe000000 0x0 0x480000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> + uart_B: serial@7a000 {
> + compatible = "amlogic,meson-s4-uart",
> + "amlogic,meson-ao-uart";
> + reg = <0x0 0x7a000 0x0 0x18>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + clocks = <&xtal>, <&xtal>, <&xtal>;
> + clock-names = "xtal", "pclk", "baud";
> + };
> + };
> + };
> +};
>
> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222
2022-01-06 10:41 ` Jerome Brunet
@ 2022-01-06 11:20 ` xianwei.zhao
0 siblings, 0 replies; 3+ messages in thread
From: xianwei.zhao @ 2022-01-06 11:20 UTC (permalink / raw)
To: Jerome Brunet, linux-arm-kernel, linux-amlogic, devicetree, linux-kernel
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring
Hi Jerome,
I will modify those lines and update the patch later.
Thanks!
Best regards,
xianwei.zhao
On 2022/1/6 下午6:41, Jerome Brunet wrote:
>
>
> On Thu 06 Jan 2022 at 13:47, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
>
>> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
>> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
>> It's capable of booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> V2 -> V3: add of dts board compatible family
>> V1 -> V2: cleaned up coding style, modify CPU affinity of timer interrups,
>> and modify GIC reg defintions.
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>> .../dts/amlogic/meson-s4-s805x2-aq222.dts | 30 ++++++
>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 99 +++++++++++++++++++
>> 3 files changed, 130 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index 5148cd9e5146..faea74a45994 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> new file mode 100644
>> index 000000000000..a942d7e06d6e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "meson-s4.dtsi"
>> +
>> +/ {
>> + model = "Amlogic Meson S4 AQ222 Development Board";
>> + compatible = "amlogic,aq222", "amlogic,s4";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases {
>> + serial0 = &uart_B;
>> + };
>> +
>> + memory@00000000 {
>> + device_type = "memory";
>> + reg = <0x0 0x0 0x0 0x40000000>;
>> + };
>> +
>> +};
>> +
>> +&uart_B {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> new file mode 100644
>> index 000000000000..d7083c93d3d0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> @@ -0,0 +1,99 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + cpus:cpus {
> ^ space after : ?
>
> Do we need the alias here ?
>
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + CPU0:cpu@0 {
> ^ space after : ?
>
> Why is the alias uppercase ?
>
> same for the other nodes
>
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35","arm,armv8";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + };
>> +
>> + CPU1:cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35","arm,armv8";
>> + reg = <0x0 0x1>;
>> + enable-method = "psci";
>> + };
>> +
>> + CPU2:cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35","arm,armv8";
>> + reg = <0x0 0x2>;
>> + enable-method = "psci";
>> + };
>> +
>> + CPU3:cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a35","arm,armv8";
>> + reg = <0x0 0x3>;
>> + enable-method = "psci";
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + xtal: xtal-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "xtal";
>> + #clock-cells = <0>;
>> + };
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gic: interrupt-controller@fff01000 {
>> + compatible = "arm,gic-400";
>> + #interrupt-cells = <3>;
>> + #address-cells = <0>;
>> + interrupt-controller;
>> + reg = <0x0 0xfff01000 0 0x1000>,
>> + <0x0 0xfff02000 0 0x2000>,
>> + <0x0 0xfff04000 0 0x2000>,
>> + <0x0 0xfff06000 0 0x2000>;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + apb4: apb4@fe000000 {
>> + compatible = "simple-bus";
>> + reg = <0x0 0xfe000000 0x0 0x480000>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> + uart_B: serial@7a000 {
>> + compatible = "amlogic,meson-s4-uart",
>> + "amlogic,meson-ao-uart";
>> + reg = <0x0 0x7a000 0x0 0x18>;
>> + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
>> + status = "disabled";
>> + clocks = <&xtal>, <&xtal>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + };
>> + };
>> + };
>> +};
>>
>> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
>
> .
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-06 11:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-06 5:47 [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222 Xianwei Zhao
2022-01-06 10:41 ` Jerome Brunet
2022-01-06 11:20 ` xianwei.zhao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).