* [PATCH v2] ARM: dts: at91: sama7g5: Add crypto nodes
@ 2022-02-07 3:43 Tudor Ambarus
2022-02-07 10:33 ` Claudiu.Beznea
0 siblings, 1 reply; 2+ messages in thread
From: Tudor Ambarus @ 2022-02-07 3:43 UTC (permalink / raw)
To: nicolas.ferre, claudiu.beznea, alexandre.belloni
Cc: robh+dt, devicetree, linux-arm-kernel, linux-kernel, Tudor Ambarus
Describe and enable the AES, SHA and TDES crypto IPs. Tested with the
extra run-time self tests of the registered crypto algorithms.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v2:
- add label to the tdes node
- update commit description and specify testing method
- put clocks and clock-names properties before dmas and dma-names
because the clocks are mandatory, while DMA is optional for TDES and SHA
arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7972cb8c2562..a87f498cf098 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
clock-names = "pclk", "gclk";
};
+ aes: aes@e1810000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xe1810000 0x100>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+ clock-names = "aes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ };
+
+ sha: sha@e1814000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xe1814000 0x100>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+ clock-names = "sha_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+ dma-names = "tx";
+ status = "okay";
+ };
+
flx0: flexcom@e1818000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe1818000 0x200>;
@@ -475,6 +498,18 @@ trng: rng@e2010000 {
status = "disabled";
};
+ tdes: tdes@e2014000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xe2014000 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+ clock-names = "tdes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+ <&dma0 AT91_XDMAC_DT_PERID(53)>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ };
+
flx4: flexcom@e2018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe2018000 0x200>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: at91: sama7g5: Add crypto nodes
2022-02-07 3:43 [PATCH v2] ARM: dts: at91: sama7g5: Add crypto nodes Tudor Ambarus
@ 2022-02-07 10:33 ` Claudiu.Beznea
0 siblings, 0 replies; 2+ messages in thread
From: Claudiu.Beznea @ 2022-02-07 10:33 UTC (permalink / raw)
To: Tudor.Ambarus, Nicolas.Ferre, alexandre.belloni
Cc: robh+dt, devicetree, linux-arm-kernel, linux-kernel
On 07.02.2022 05:43, Tudor Ambarus wrote:
> Describe and enable the AES, SHA and TDES crypto IPs. Tested with the
> extra run-time self tests of the registered crypto algorithms.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v2:
> - add label to the tdes node
> - update commit description and specify testing method
> - put clocks and clock-names properties before dmas and dma-names
> because the clocks are mandatory, while DMA is optional for TDES and SHA
>
> arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
> index 7972cb8c2562..a87f498cf098 100644
> --- a/arch/arm/boot/dts/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/sama7g5.dtsi
> @@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
> clock-names = "pclk", "gclk";
> };
>
> + aes: aes@e1810000 {
> + compatible = "atmel,at91sam9g46-aes";
> + reg = <0xe1810000 0x100>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> + clock-names = "aes_clk";
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
> + <&dma0 AT91_XDMAC_DT_PERID(2)>;
> + dma-names = "tx", "rx";
> + status = "okay";
Hi Tudor,
Lines with:
status = "okay";
could be removed as this is the default state.
Thank you,
Claudiu Beznea
> + };
> +
> + sha: sha@e1814000 {
> + compatible = "atmel,at91sam9g46-sha";
> + reg = <0xe1814000 0x100>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
> + clock-names = "sha_clk";
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
> + dma-names = "tx";
> + status = "okay";
> + };
> +
> flx0: flexcom@e1818000 {
> compatible = "atmel,sama5d2-flexcom";
> reg = <0xe1818000 0x200>;
> @@ -475,6 +498,18 @@ trng: rng@e2010000 {
> status = "disabled";
> };
>
> + tdes: tdes@e2014000 {
> + compatible = "atmel,at91sam9g46-tdes";
> + reg = <0xe2014000 0x100>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
> + clock-names = "tdes_clk";
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
> + <&dma0 AT91_XDMAC_DT_PERID(53)>;
> + dma-names = "tx", "rx";
> + status = "okay";
> + };
> +
> flx4: flexcom@e2018000 {
> compatible = "atmel,sama5d2-flexcom";
> reg = <0xe2018000 0x200>;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-02-07 10:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-07 3:43 [PATCH v2] ARM: dts: at91: sama7g5: Add crypto nodes Tudor Ambarus
2022-02-07 10:33 ` Claudiu.Beznea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).