[PATCH v2] media: imx-jpeg: Leave a blank space before the configuration data

[Ming Qian <ming.qian@nxp.com>]

There is a hardware bug that it will load
the first 128 bytes of configuration data twice,
it will led to some configure error.
so shift the configuration data 128 bytes,
and make the first 128 bytes all zero,
then hardware will load the 128 zero twice,
and ignore them as garbage.
then the configuration data can be loaded correctly

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
---
v2
- add some comments about why the 0x80 offset is needed
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
index 734e1b65fbc7..c0fd030d0f19 100644
--- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
+++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
@@ -519,6 +519,7 @@ static bool mxc_jpeg_alloc_slot_data(struct mxc_jpeg_dev *jpeg,
 				     GFP_ATOMIC);
 	if (!cfg_stm)
 		goto err;
+	memset(cfg_stm, 0, MXC_JPEG_MAX_CFG_STREAM);
 	jpeg->slot_data[slot].cfg_stream_vaddr = cfg_stm;
 
 skip_alloc:
@@ -755,7 +756,13 @@ static unsigned int mxc_jpeg_setup_cfg_stream(void *cfg_stream_vaddr,
 					      u32 fourcc,
 					      u16 w, u16 h)
 {
-	unsigned int offset = 0;
+	/*
+	 * There is a hardware issue that first 128 bytes of configuration data
+	 * can't be loaded correctly.
+	 * To avoid this issue, we need to write the configuration from
+	 * an offset which should be no less than 0x80 (128 bytes).
+	 */
+	unsigned int offset = 0x80;
 	u8 *cfg = (u8 *)cfg_stream_vaddr;
 	struct mxc_jpeg_sof *sof;
 	struct mxc_jpeg_sos *sos;
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel