From: Will Deacon <will@kernel.org>
To: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: suzuki.poulose@arm.com, robin.murphy@arm.com,
catalin.marinas@arm.com, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
sudeep.holla@arm.com, thanu.rangarajan@arm.com,
Michael.Williams@arm.com, treding@nvidia.com,
jonathanh@nvidia.com, vsethi@nvidia.com,
mathieu.poirier@linaro.org, mike.leach@linaro.org,
leo.yan@linaro.org
Subject: Re: [RESEND PATCH v3 1/2] perf: coresight_pmu: Add support for ARM CoreSight PMU driver
Date: Mon, 27 Jun 2022 11:36:42 +0100 [thread overview]
Message-ID: <20220627103642.GB22095@willie-the-truck> (raw)
In-Reply-To: <20220621055035.31766-2-bwicaksono@nvidia.com>
On Tue, Jun 21, 2022 at 12:50:34AM -0500, Besar Wicaksono wrote:
> Add support for ARM CoreSight PMU driver framework and interfaces.
> The driver provides generic implementation to operate uncore PMU based
> on ARM CoreSight PMU architecture. The driver also provides interface
> to get vendor/implementation specific information, for example event
> attributes and formating.
>
> The specification used in this implementation can be found below:
> * ACPI Arm Performance Monitoring Unit table:
> https://developer.arm.com/documentation/den0117/latest
> * ARM Coresight PMU architecture:
> https://developer.arm.com/documentation/ihi0091/latest
>
> Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
> ---
> arch/arm64/configs/defconfig | 1 +
> drivers/perf/Kconfig | 2 +
> drivers/perf/Makefile | 1 +
> drivers/perf/coresight_pmu/Kconfig | 11 +
> drivers/perf/coresight_pmu/Makefile | 6 +
> .../perf/coresight_pmu/arm_coresight_pmu.c | 1312 +++++++++++++++++
> .../perf/coresight_pmu/arm_coresight_pmu.h | 177 +++
> 7 files changed, 1510 insertions(+)
> create mode 100644 drivers/perf/coresight_pmu/Kconfig
> create mode 100644 drivers/perf/coresight_pmu/Makefile
> create mode 100644 drivers/perf/coresight_pmu/arm_coresight_pmu.c
> create mode 100644 drivers/perf/coresight_pmu/arm_coresight_pmu.h
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 7d1105343bc2..22184f8883da 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1212,6 +1212,7 @@ CONFIG_PHY_UNIPHIER_USB3=y
> CONFIG_PHY_TEGRA_XUSB=y
> CONFIG_PHY_AM654_SERDES=m
> CONFIG_PHY_J721E_WIZ=m
> +CONFIG_ARM_CORESIGHT_PMU=y
> CONFIG_ARM_SMMU_V3_PMU=m
> CONFIG_FSL_IMX8_DDR_PMU=m
> CONFIG_QCOM_L2_PMU=y
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 1e2d69453771..c4e7cd5b4162 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -192,4 +192,6 @@ config MARVELL_CN10K_DDR_PMU
> Enable perf support for Marvell DDR Performance monitoring
> event on CN10K platform.
>
> +source "drivers/perf/coresight_pmu/Kconfig"
> +
> endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 57a279c61df5..4126a04b5583 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
> obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
> +obj-$(CONFIG_ARM_CORESIGHT_PMU) += coresight_pmu/
> diff --git a/drivers/perf/coresight_pmu/Kconfig b/drivers/perf/coresight_pmu/Kconfig
> new file mode 100644
> index 000000000000..89174f54c7be
> --- /dev/null
> +++ b/drivers/perf/coresight_pmu/Kconfig
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES.
> +
> +config ARM_CORESIGHT_PMU
> + tristate "ARM Coresight PMU"
> + depends on ACPI
> + depends on ACPI_APMT || COMPILE_TEST
ACPI_APMT doesn't exist in my tree. What's missing here?
Will
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-27 10:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-21 5:50 [RESEND PATCH v3 0/2] perf: ARM CoreSight PMU support Besar Wicaksono
2022-06-21 5:50 ` [RESEND PATCH v3 1/2] perf: coresight_pmu: Add support for ARM CoreSight PMU driver Besar Wicaksono
2022-06-27 10:36 ` Will Deacon [this message]
2022-07-07 0:25 ` Besar Wicaksono
2022-07-07 11:07 ` Suzuki K Poulose
2022-07-08 10:46 ` Besar Wicaksono
2022-07-12 16:36 ` Mathieu Poirier
2022-07-12 20:13 ` Robin Murphy
2022-07-13 16:26 ` Mathieu Poirier
2022-07-14 4:47 ` Besar Wicaksono
2022-07-21 3:36 ` Besar Wicaksono
2022-07-21 9:19 ` Suzuki K Poulose
2022-07-21 15:35 ` Mathieu Poirier
2022-08-01 22:27 ` Besar Wicaksono
2022-08-02 9:38 ` Suzuki K Poulose
2022-08-02 23:04 ` Besar Wicaksono
2022-06-21 5:50 ` [RESEND PATCH v3 2/2] perf: coresight_pmu: Add support for NVIDIA SCF and MCF attribute Besar Wicaksono
2022-06-27 10:37 ` Will Deacon
2022-07-07 0:40 ` Besar Wicaksono
2022-07-07 11:07 ` Suzuki K Poulose
2022-07-08 13:35 ` Besar Wicaksono
2022-07-07 16:37 ` [RESEND PATCH v3 0/2] perf: ARM CoreSight PMU support Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627103642.GB22095@willie-the-truck \
--to=will@kernel.org \
--cc=Michael.Williams@arm.com \
--cc=bwicaksono@nvidia.com \
--cc=catalin.marinas@arm.com \
--cc=jonathanh@nvidia.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=robin.murphy@arm.com \
--cc=sudeep.holla@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=thanu.rangarajan@arm.com \
--cc=treding@nvidia.com \
--cc=vsethi@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).