* [PATCH] ARM: dts: lan966x: add support for pcb8290
@ 2022-08-17 19:00 Horatiu Vultur
2022-08-23 7:11 ` Claudiu.Beznea
0 siblings, 1 reply; 3+ messages in thread
From: Horatiu Vultur @ 2022-08-17 19:00 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-kernel
Cc: arnd, UNGLinuxDriver, soc, robh+dt, krzysztof.kozlowski+dt, olof,
maxime.chevallier, Horatiu Vultur, claudiu.beznea
Add basic support for pcb8290. It has 8 lan8814 PHYS on the external
MDIO bus and no SFP ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/lan966x-pcb8290.dts | 169 ++++++++++++++++++++++++++
2 files changed, 170 insertions(+)
create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..595e870750cd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \
dtb-$(CONFIG_SOC_LAN966) += \
lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+ lan966x-pcb8290.dtb \
lan966x-pcb8291.dtb \
lan966x-pcb8309.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..ea5267aca6b4
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8290.dts - Device Tree file for PCB8290
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+ model = "Microchip EVB LAN9668";
+ compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+&gpio {
+ miim_a_pins: mdio-pins {
+ /* MDC, MDIO */
+ pins = "GPIO_28", "GPIO_29";
+ function = "miim_a";
+ };
+
+ pps_out_pins: pps-out-pins {
+ pins = "GPIO_38";
+ function = "ptpsync_3";
+ };
+
+ ptp_ext_pins: ptp-ext-pins {
+ pins = "GPIO_35";
+ function = "ptpsync_0";
+ };
+
+ udc_pins: ucd-pins {
+ /* VBUS_DET B */
+ pins = "GPIO_8";
+ function = "usb_slave_b";
+ };
+};
+
+&mdio0 {
+ pinctrl-0 = <&miim_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ext_phy0: ethernet-phy@7 {
+ reg = <7>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy1: ethernet-phy@8 {
+ reg = <8>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy2: ethernet-phy@9 {
+ reg = <9>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy3: ethernet-phy@10 {
+ reg = <10>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy4: ethernet-phy@15 {
+ reg = <15>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy5: ethernet-phy@16 {
+ reg = <16>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy6: ethernet-phy@17 {
+ reg = <17>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_phy7: ethernet-phy@18 {
+ reg = <18>;
+ coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&port0 {
+ reg = <2>;
+ phy-handle = <&ext_phy2>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 0 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port1 {
+ reg = <3>;
+ phy-handle = <&ext_phy3>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 1 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port2 {
+ reg = <0>;
+ phy-handle = <&ext_phy0>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 2 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port3 {
+ reg = <1>;
+ phy-handle = <&ext_phy1>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 3 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port4 {
+ reg = <6>;
+ phy-handle = <&ext_phy6>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 4 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port5 {
+ reg = <7>;
+ phy-handle = <&ext_phy7>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 5 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port6 {
+ reg = <4>;
+ phy-handle = <&ext_phy4>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 6 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port7 {
+ reg = <5>;
+ phy-handle = <&ext_phy5>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 7 SERDES6G(2)>;
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&switch {
+ pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&udc {
+ pinctrl-0 = <&udc_pins>;
+ pinctrl-names = "default";
+ atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: lan966x: add support for pcb8290
2022-08-17 19:00 [PATCH] ARM: dts: lan966x: add support for pcb8290 Horatiu Vultur
@ 2022-08-23 7:11 ` Claudiu.Beznea
2022-08-23 19:22 ` Horatiu Vultur - M31836
0 siblings, 1 reply; 3+ messages in thread
From: Claudiu.Beznea @ 2022-08-23 7:11 UTC (permalink / raw)
To: Horatiu.Vultur, devicetree, linux-arm-kernel, linux-kernel
Cc: arnd, UNGLinuxDriver, soc, robh+dt, krzysztof.kozlowski+dt, olof,
maxime.chevallier
On 17.08.2022 22:00, Horatiu Vultur wrote:
> Add basic support for pcb8290. It has 8 lan8814 PHYS on the external
> MDIO bus and no SFP ports.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/lan966x-pcb8290.dts | 169 ++++++++++++++++++++++++++
> 2 files changed, 170 insertions(+)
> create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 05d8aef6e5d2..595e870750cd 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \
> dtb-$(CONFIG_SOC_LAN966) += \
> lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
> lan966x-kontron-kswitch-d10-mmt-8g.dtb \
> + lan966x-pcb8290.dtb \
> lan966x-pcb8291.dtb \
> lan966x-pcb8309.dtb
> dtb-$(CONFIG_SOC_LS1021A) += \
> diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
> new file mode 100644
> index 000000000000..ea5267aca6b4
> --- /dev/null
> +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * lan966x_pcb8290.dts - Device Tree file for PCB8290
> + */
> +/dts-v1/;
> +#include "lan966x.dtsi"
> +#include "dt-bindings/phy/phy-lan966x-serdes.h"
> +
> +/ {
> + model = "Microchip EVB LAN9668";
> + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
> +
> + gpio-restart {
> + compatible = "gpio-restart";
> + gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
> + priority = <200>;
> + };
> +};
> +
> +&gpio {
> + miim_a_pins: mdio-pins {
> + /* MDC, MDIO */
> + pins = "GPIO_28", "GPIO_29";
> + function = "miim_a";
> + };
> +
> + pps_out_pins: pps-out-pins {
Can you also document this one as well? I can do it while applying if you
provide the strings.
> + pins = "GPIO_38";
> + function = "ptpsync_3";
> + };
> +
> + ptp_ext_pins: ptp-ext-pins {
Ditto
Thank you,
Claudiu Beznea
> + pins = "GPIO_35";
> + function = "ptpsync_0";
> + };
> +
> + udc_pins: ucd-pins {
> + /* VBUS_DET B */
> + pins = "GPIO_8";
> + function = "usb_slave_b";
> + };
> +};
> +
> +&mdio0 {
> + pinctrl-0 = <&miim_a_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + ext_phy0: ethernet-phy@7 {
> + reg = <7>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy1: ethernet-phy@8 {
> + reg = <8>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy2: ethernet-phy@9 {
> + reg = <9>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy3: ethernet-phy@10 {
> + reg = <10>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy4: ethernet-phy@15 {
> + reg = <15>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy5: ethernet-phy@16 {
> + reg = <16>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy6: ethernet-phy@17 {
> + reg = <17>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_phy7: ethernet-phy@18 {
> + reg = <18>;
> + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&port0 {
> + reg = <2>;
> + phy-handle = <&ext_phy2>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 0 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port1 {
> + reg = <3>;
> + phy-handle = <&ext_phy3>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 1 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port2 {
> + reg = <0>;
> + phy-handle = <&ext_phy0>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 2 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port3 {
> + reg = <1>;
> + phy-handle = <&ext_phy1>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 3 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port4 {
> + reg = <6>;
> + phy-handle = <&ext_phy6>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 4 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port5 {
> + reg = <7>;
> + phy-handle = <&ext_phy7>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 5 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port6 {
> + reg = <4>;
> + phy-handle = <&ext_phy4>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 6 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port7 {
> + reg = <5>;
> + phy-handle = <&ext_phy5>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 7 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&serdes {
> + status = "okay";
> +};
> +
> +&switch {
> + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&udc {
> + pinctrl-0 = <&udc_pins>;
> + pinctrl-names = "default";
> + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: lan966x: add support for pcb8290
2022-08-23 7:11 ` Claudiu.Beznea
@ 2022-08-23 19:22 ` Horatiu Vultur - M31836
0 siblings, 0 replies; 3+ messages in thread
From: Horatiu Vultur - M31836 @ 2022-08-23 19:22 UTC (permalink / raw)
To: Claudiu Beznea - M18063
Cc: devicetree, arnd, linux-kernel, soc, robh+dt,
krzysztof.kozlowski+dt, olof, maxime.chevallier, UNGLinuxDriver,
linux-arm-kernel
The 08/23/2022 07:11, Claudiu Beznea - M18063 wrote:
Hi Claudiu,
> > +&gpio {
> > + miim_a_pins: mdio-pins {
> > + /* MDC, MDIO */
> > + pins = "GPIO_28", "GPIO_29";
> > + function = "miim_a";
> > + };
> > +
> > + pps_out_pins: pps-out-pins {
>
> Can you also document this one as well? I can do it while applying if you
> provide the strings.
Yes, I will do that.
I will send a new version because I have seen that there is also a small
error in the commit message.
>
> > + pins = "GPIO_38";
> > + function = "ptpsync_3";
> > + };
> > +
> > + ptp_ext_pins: ptp-ext-pins {
>
> Ditto
>
> Thank you,
> Claudiu Beznea
>
> > + pins = "GPIO_35";
> > + function = "ptpsync_0";
> > + };
> > +
> > + udc_pins: ucd-pins {
> > + /* VBUS_DET B */
> > + pins = "GPIO_8";
> > + function = "usb_slave_b";
> > + };
> > +};
> > +
> > +&mdio0 {
> > + pinctrl-0 = <&miim_a_pins>;
> > + pinctrl-names = "default";
> > + status = "okay";
> > +
> > + ext_phy0: ethernet-phy@7 {
> > + reg = <7>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy1: ethernet-phy@8 {
> > + reg = <8>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy2: ethernet-phy@9 {
> > + reg = <9>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy3: ethernet-phy@10 {
> > + reg = <10>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy4: ethernet-phy@15 {
> > + reg = <15>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy5: ethernet-phy@16 {
> > + reg = <16>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy6: ethernet-phy@17 {
> > + reg = <17>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + ext_phy7: ethernet-phy@18 {
> > + reg = <18>;
> > + coma-mode-gpios = <&gpio 60 GPIO_ACTIVE_HIGH>;
> > + };
> > +};
> > +
> > +&port0 {
> > + reg = <2>;
> > + phy-handle = <&ext_phy2>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 0 SERDES6G(1)>;
> > + status = "okay";
> > +};
> > +
> > +&port1 {
> > + reg = <3>;
> > + phy-handle = <&ext_phy3>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 1 SERDES6G(1)>;
> > + status = "okay";
> > +};
> > +
> > +&port2 {
> > + reg = <0>;
> > + phy-handle = <&ext_phy0>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 2 SERDES6G(1)>;
> > + status = "okay";
> > +};
> > +
> > +&port3 {
> > + reg = <1>;
> > + phy-handle = <&ext_phy1>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 3 SERDES6G(1)>;
> > + status = "okay";
> > +};
> > +
> > +&port4 {
> > + reg = <6>;
> > + phy-handle = <&ext_phy6>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 4 SERDES6G(2)>;
> > + status = "okay";
> > +};
> > +
> > +&port5 {
> > + reg = <7>;
> > + phy-handle = <&ext_phy7>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 5 SERDES6G(2)>;
> > + status = "okay";
> > +};
> > +
> > +&port6 {
> > + reg = <4>;
> > + phy-handle = <&ext_phy4>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 6 SERDES6G(2)>;
> > + status = "okay";
> > +};
> > +
> > +&port7 {
> > + reg = <5>;
> > + phy-handle = <&ext_phy5>;
> > + phy-mode = "qsgmii";
> > + phys = <&serdes 7 SERDES6G(2)>;
> > + status = "okay";
> > +};
> > +
> > +&serdes {
> > + status = "okay";
> > +};
> > +
> > +&switch {
> > + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
> > + pinctrl-names = "default";
> > + status = "okay";
> > +};
> > +
> > +&udc {
> > + pinctrl-0 = <&udc_pins>;
> > + pinctrl-names = "default";
> > + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
> > + status = "okay";
> > +};
>
--
/Horatiu
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-08-23 19:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-17 19:00 [PATCH] ARM: dts: lan966x: add support for pcb8290 Horatiu Vultur
2022-08-23 7:11 ` Claudiu.Beznea
2022-08-23 19:22 ` Horatiu Vultur - M31836
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).