[PATCH V4 0/8] arm64: dts: imx93: add several nodes

[PATCH V4 0/8] arm64: dts: imx93: add several nodes

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

V4:
  Per Rob's comment, use syscon.yaml for i.MX93 aonmix/wakeupmix blk ctrl.
  Drop status okay in s4mu node in patch 4 per Shawn's comment.

V3:
 Address DT maintainer's comments in patch 1

V2:
 Add binding doc for aonmix/wakeupmix blk ctrl
 Update compatible in patch 5 according to binding doc
 The lpi2c binding doc has been accepted:
   https://lore.kernel.org/all/Yw3hfcQ2JV248GIo@shikoro/

V1:
Add S4MU, BLK CTRL, PMU, LPI2C, LPSPI nodes.
Add GPIO clk entry.
Correct SDHC clk entry
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220812074609.53131-1-peng.fan@oss.nxp.com/

Peng Fan (8):
  dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
  arm64: dts: imx93: correct SDHC clk entry
  arm64: dts: imx93: add gpio clk
  arm64: dts: imx93: add s4 mu node
  arm64: dts: imx93: add blk ctrl node
  arm64: dts: imx93: add a55 pmu
  arm64: dts: imx93: add lpi2c nodes
  arm64: dts: imx93: add lpspi nodes

 .../devicetree/bindings/mfd/syscon.yaml       |   2 +
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 161 +++++++++++++++++-
 2 files changed, 157 insertions(+), 6 deletions(-)

-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 1/8] dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Document i.MX93 BLK CTRL system registers.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 Documentation/devicetree/bindings/mfd/syscon.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 4639112160f3..3c9732796832 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -40,6 +40,8 @@ properties:
               - allwinner,sun50i-a64-system-controller
               - brcm,cru-clkset
               - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 2/8] arm64: dts: imx93: correct SDHC clk entry

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

DUMMY clk only works with clk_ignore_unused and bootloader enables those
clks that required for SDHC work properly.

Correct SDHC clk entry with real clk.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f83a07c7c9b1..431dc239631d 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -248,8 +248,8 @@ usdhc1: mmc@42850000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x42850000 0x10000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
@@ -262,8 +262,8 @@ usdhc2: mmc@42860000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x42860000 0x10000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -276,8 +276,8 @@ usdhc3: mmc@428b0000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x428b0000 0x10000>;
 				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 3/8] arm64: dts: imx93: add gpio clk

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add the GPIO clk, otherwise GPIO may not work if clk driver disable the
GPIO clk during kernel boot.

Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 431dc239631d..26d5ce4a5f2c 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -295,6 +295,9 @@ gpio2: gpio@43810080 {
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 32 32>;
 		};
 
@@ -306,6 +309,9 @@ gpio3: gpio@43820080 {
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 64 32>;
 		};
 
@@ -317,6 +323,9 @@ gpio4: gpio@43830080 {
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 96 32>;
 		};
 
@@ -328,6 +337,9 @@ gpio1: gpio@47400080 {
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 0 32>;
 		};
 	};
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 4/8] arm64: dts: imx93: add s4 mu node

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add s4 mu node for sentinel communication

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 26d5ce4a5f2c..bb9e96ffb70a 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -342,5 +342,14 @@ gpio1: gpio@47400080 {
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 0 32>;
 		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "txirq", "rxirq";
+			#mbox-cells = <2>;
+		};
 	};
 };
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 5/8] arm64: dts: imx93: add blk ctrl node

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add i.MX93 BLK CTRL MIX node

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index bb9e96ffb70a..93f96067456e 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -112,6 +112,11 @@ aips1: bus@44000000 {
 			#size-cells = <1>;
 			ranges;
 
+			anomix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
 			mu1: mailbox@44230000 {
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x44230000 0x10000>;
@@ -174,6 +179,11 @@ aips2: bus@42000000 {
 			#size-cells = <1>;
 			ranges;
 
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
 			mu2: mailbox@42440000 {
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x42440000 0x10000>;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 6/8] arm64: dts: imx93: add a55 pmu

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add A55 PMU node for perf usage

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 93f96067456e..9f6e8a386071 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -72,6 +72,11 @@ clk_ext1: clock-ext1 {
 		clock-output-names = "clk_ext1";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 7/8] arm64: dts: imx93: add lpi2c nodes

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add i.MX93 lpi2c nodes

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

binding doc accepeted:
  https://lore.kernel.org/all/Yw3hfcQ2JV248GIo@shikoro/

 arch/arm64/boot/dts/freescale/imx93.dtsi | 89 ++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 9f6e8a386071..1a5a6c51aec4 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -16,6 +16,14 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -138,6 +146,26 @@ system_counter: timer@44290000 {
 				clock-names = "per";
 			};
 
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart1: serial@44380000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44380000 0x1000>;
@@ -197,6 +225,26 @@ mu2: mailbox@42440000 {
 				status = "disabled";
 			};
 
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart3: serial@42570000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
@@ -250,6 +298,47 @@ lpuart8: serial@426a0000 {
 				clock-names = "ipg";
 				status = "disabled";
 			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 		};
 
 		aips3: bus@42800000 {
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 8/8] arm64: dts: imx93: add lpspi nodes

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add i.MX93 lpspi nodes

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 1a5a6c51aec4..b3d82b13b524 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -166,6 +166,30 @@ lpi2c2: i2c@44350000 {
 				status = "disabled";
 			};
 
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart1: serial@44380000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44380000 0x1000>;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 1/8] dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers

[Krzysztof Kozlowski]

On 05/09/2022 07:59, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Document i.MX93 BLK CTRL system registers.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 0/8] arm64: dts: imx93: add several nodes

[Shawn Guo]

On Mon, Sep 05, 2022 at 01:59:07PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> V4:
>   Per Rob's comment, use syscon.yaml for i.MX93 aonmix/wakeupmix blk ctrl.
>   Drop status okay in s4mu node in patch 4 per Shawn's comment.
> 
> V3:
>  Address DT maintainer's comments in patch 1
> 
> V2:
>  Add binding doc for aonmix/wakeupmix blk ctrl
>  Update compatible in patch 5 according to binding doc
>  The lpi2c binding doc has been accepted:
>    https://lore.kernel.org/all/Yw3hfcQ2JV248GIo@shikoro/
> 
> V1:
> Add S4MU, BLK CTRL, PMU, LPI2C, LPSPI nodes.
> Add GPIO clk entry.
> Correct SDHC clk entry
> https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220812074609.53131-1-peng.fan@oss.nxp.com/
> 
> Peng Fan (8):
>   dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
>   arm64: dts: imx93: correct SDHC clk entry
>   arm64: dts: imx93: add gpio clk
>   arm64: dts: imx93: add s4 mu node
>   arm64: dts: imx93: add blk ctrl node
>   arm64: dts: imx93: add a55 pmu
>   arm64: dts: imx93: add lpi2c nodes
>   arm64: dts: imx93: add lpspi nodes

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel