[PATCH v2] arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro

* [PATCH v2] arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
@ 2022-09-06 16:42 Frank Wunderlich
  2022-09-07 12:54 ` Krzysztof Kozlowski
  2022-09-09 18:33 ` Heiko Stuebner
  0 siblings, 2 replies; 3+ messages in thread
From: Frank Wunderlich @ 2022-09-06 16:42 UTC (permalink / raw)
  To: linux-rockchip
  Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
	Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel

From: Frank Wunderlich <frank-w@public-files.de>

Add -regulator suffix to regulator names on Banana Pi R2 Pro board as
discussed on Mailinglist

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
https://patchwork.kernel.org/project/linux-rockchip/patch/20220825193836.54262-6-linux@fw-web.de/

v2: change _ to - in vcc5v0_usb node
---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 7a8d55a898f5..950613595f42 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -46,7 +46,7 @@ green_led: led-1 {
 		};
 	};
 
-	dc_12v: dc-12v {
+	dc_12v: dc-12v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
 		regulator-always-on;
@@ -66,7 +66,7 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	vcc3v3_sys: vcc3v3-sys {
+	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
 		regulator-always-on;
@@ -76,7 +76,7 @@ vcc3v3_sys: vcc3v3-sys {
 		vin-supply = <&dc_12v>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -146,7 +146,7 @@ vcc3v3_ngff: vcc3v3-ngff-regulator {
 		vin-supply = <&vcc3v3_pi6c_05>;
 	};
 
-	vcc5v0_usb: vcc5v0_usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
@@ -156,7 +156,7 @@ vcc5v0_usb: vcc5v0_usb {
 		vin-supply = <&dc_12v>;
 	};
 
-	vcc5v0_usb_host: vcc5v0-usb-host {
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -168,7 +168,7 @@ vcc5v0_usb_host: vcc5v0-usb-host {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc5v0_usb_otg: vcc5v0-usb-otg {
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 3+ messages in thread