[PATCH v4 08/30] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function

[PATCH v4 08/30] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 41 +++++++++++-----------------
 1 file changed, 16 insertions(+), 25 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 51874d0a284c..0e33d32a9d2e 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tzd = data->tzd;
-	const struct thermal_trip * const trips =
-		of_thermal_get_trip_points(tzd);
 	unsigned int status;
-	int ret = 0, temp, hyst;
-
-	if (!trips) {
-		dev_err(&pdev->dev,
-			"Cannot get trip points from device tree!\n");
-		return -ENODEV;
-	}
+	int ret = 0, temp;
 
 	if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
 		ret = tzd->ops->get_crit_temp(tzd, &temp);
@@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 		/* Write temperature code for rising and falling threshold */
 		for (i = 0; i < ntrips; i++) {
-			/* Write temperature code for rising threshold */
-			ret = tzd->ops->get_trip_temp(tzd, i, &temp);
-			if (ret)
-				goto err;
-			temp /= MCELSIUS;
-			data->tmu_set_trip_temp(data, i, temp);
 
-			/* Write temperature code for falling threshold */
-			ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+			struct thermal_trip trip;
+			
+			ret = thermal_zone_get_trip(tzd, i, &trip);
 			if (ret)
 				goto err;
-			hyst /= MCELSIUS;
-			data->tmu_set_trip_hyst(data, i, temp, hyst);
+
+			data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
+			data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
+						trip.hysteresis / MCELSIUS);
 		}
 
 		data->tmu_clear_irqs(data);
@@ -360,21 +349,23 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 }
 
 static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
-					 int trip, u8 temp)
+					 int trip_id, u8 temp)
 {
-	const struct thermal_trip * const trips =
-		of_thermal_get_trip_points(data->tzd);
+	struct thermal_trip trip;
 	u8 ref, th_code;
 
-	ref = trips[0].temperature / MCELSIUS;
+	if (thermal_zone_get_trip(data->tzd, 0, &trip))
+		return;
 
-	if (trip == 0) {
+	ref = trip.temperature / MCELSIUS;
+	
+	if (trip_id == 0) {
 		th_code = temp_to_code(data, ref);
 		writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
 	}
 
 	temp -= ref;
-	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
 }
 
 /* failing thresholds are not supported on Exynos4210 */
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 09/30] thermal/drivers/exynos: of_thermal_get_ntrips()

[Daniel Lezcano]

The thermal core framework allows to get the number of thermal trips,
use it instead of visiting the thermal core structure internals.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0e33d32a9d2e..91e6860b5ec4 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -260,6 +260,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tzd = data->tzd;
+	int num_trips = thermal_zone_get_num_trips(tzd);
 	unsigned int status;
 	int ret = 0, temp;
 
@@ -271,12 +272,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		goto out;
 	}
 
-	if (of_thermal_get_ntrips(tzd) > data->ntrip) {
+	if (num_trips > data->ntrip) {
 		dev_info(&pdev->dev,
 			 "More trip points than supported by this TMU.\n");
 		dev_info(&pdev->dev,
 			 "%d trip points should be configured in polling mode.\n",
-			 (of_thermal_get_ntrips(tzd) - data->ntrip));
+			 num_trips - data->ntrip);
 	}
 
 	mutex_lock(&data->lock);
@@ -289,7 +290,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		ret = -EBUSY;
 	} else {
 		int i, ntrips =
-			min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+			min_t(int, num_trips, data->ntrip);
 
 		data->tmu_initialize(pdev);
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 10/30] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Daniel Lezcano]

The thermal_zone_get_trip() does the same check as
of_thermal_is_trip_valid(). Replace the call to
of_thermal_is_trip_valid() by thermal_zone_get_trip().

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 91e6860b5ec4..34b460092308 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -554,13 +554,14 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
@@ -584,13 +585,14 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, pd_det_en, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
@@ -615,13 +617,14 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 10/30] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Krzysztof Kozlowski]

On 21/09/2022 11:42, Daniel Lezcano wrote:
> The thermal_zone_get_trip() does the same check as
> of_thermal_is_trip_valid(). Replace the call to
> of_thermal_is_trip_valid() by thermal_zone_get_trip().
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 10/30] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Marek Szyprowski]

Hi Daniel,

On 21.09.2022 11:42, Daniel Lezcano wrote:
> The thermal_zone_get_trip() does the same check as
> of_thermal_is_trip_valid(). Replace the call to
> of_thermal_is_trip_valid() by thermal_zone_get_trip().
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---

This patch landed in linux next-20220923 as commit 4a71bb8005ba 
("thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by 
thermal_zone_get_trip()"). Unfortunately it causes deadlock on all 
Exynos based board:

============================================
WARNING: possible recursive locking detected
6.0.0-rc1-00062-g4a71bb8005ba #12855 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
c263c394 (&tz->lock){+.+.}-{3:3}, at: 
thermal_zone_device_update.part.0+0x114/0x538

but task is already holding lock:
c263c394 (&tz->lock){+.+.}-{3:3}, at: 
thermal_zone_device_update.part.0+0x3c/0x538

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&tz->lock);
   lock(&tz->lock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

2 locks held by swapper/0/1:
  #0: c1d5248c (&dev->mutex){....}-{3:3}, at: __driver_attach+0xe4/0x1f0
  #1: c263c394 (&tz->lock){+.+.}-{3:3}, at: 
thermal_zone_device_update.part.0+0x3c/0x538

stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00062-g4a71bb8005ba 
#12855
Hardware name: Samsung Exynos (Flattened Device Tree)
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __lock_acquire+0x146c/0x2a7c
  __lock_acquire from lock_acquire+0x124/0x3e4
  lock_acquire from __mutex_lock+0x90/0x948
  __mutex_lock from mutex_lock_nested+0x1c/0x24
  mutex_lock_nested from thermal_zone_device_update.part.0+0x114/0x538
  thermal_zone_device_update.part.0 from 
thermal_zone_device_set_mode+0x70/0x98
  thermal_zone_device_set_mode from thermal_of_zone_register+0x424/0x69c
  thermal_of_zone_register from devm_thermal_of_zone_register+0x58/0x94
  devm_thermal_of_zone_register from exynos_tmu_probe+0x29c/0x728
  exynos_tmu_probe from platform_probe+0x5c/0xb8
  platform_probe from really_probe+0xe0/0x414
  really_probe from __driver_probe_device+0xa0/0x208
  __driver_probe_device from driver_probe_device+0x30/0xc0
  driver_probe_device from __driver_attach+0xf0/0x1f0
  __driver_attach from bus_for_each_dev+0x70/0xb0
  bus_for_each_dev from bus_add_driver+0x174/0x218
  bus_add_driver from driver_register+0x88/0x11c
  driver_register from do_one_initcall+0x64/0x380
  do_one_initcall from kernel_init_freeable+0x1c0/0x224
  kernel_init_freeable from kernel_init+0x18/0x12c
  kernel_init from ret_from_fork+0x14/0x2c
Exception stack(0xf082dfb0 to 0xf082dff8)

[deadlock]

Something is wrong in locking in the functions from the above stacktrace.


>   drivers/thermal/samsung/exynos_tmu.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 91e6860b5ec4..34b460092308 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -554,13 +554,14 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
>   {
>   	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>   	struct thermal_zone_device *tz = data->tzd;
> +	struct thermal_trip trip;
>   	unsigned int con, interrupt_en = 0, i;
>   
>   	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
>   
>   	if (on) {
>   		for (i = 0; i < data->ntrip; i++) {
> -			if (!of_thermal_is_trip_valid(tz, i))
> +			if (thermal_zone_get_trip(tz, i, &trip))
>   				continue;
>   
>   			interrupt_en |=
> @@ -584,13 +585,14 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
>   {
>   	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>   	struct thermal_zone_device *tz = data->tzd;
> +	struct thermal_trip trip;
>   	unsigned int con, interrupt_en = 0, pd_det_en, i;
>   
>   	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
>   
>   	if (on) {
>   		for (i = 0; i < data->ntrip; i++) {
> -			if (!of_thermal_is_trip_valid(tz, i))
> +			if (thermal_zone_get_trip(tz, i, &trip))
>   				continue;
>   
>   			interrupt_en |=
> @@ -615,13 +617,14 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
>   {
>   	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>   	struct thermal_zone_device *tz = data->tzd;
> +	struct thermal_trip trip;
>   	unsigned int con, interrupt_en = 0, i;
>   
>   	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
>   
>   	if (on) {
>   		for (i = 0; i < data->ntrip; i++) {
> -			if (!of_thermal_is_trip_valid(tz, i))
> +			if (thermal_zone_get_trip(tz, i, &trip))
>   				continue;
>   
>   			interrupt_en |=

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 10/30] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Daniel Lezcano]

Hi Marek,

thanks for reporting

On 23/09/2022 16:09, Marek Szyprowski wrote:

[ ... ]

> Exception stack(0xf082dfb0 to 0xf082dff8)
> 
> [deadlock]
> 
> Something is wrong in locking in the functions from the above stacktrace.

Are you sure this deadlock is coming from this patch? Does a revert of 
this patch solve the issue ?

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 10/30] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Marek Szyprowski]

Hi Daniel,

On 23.09.2022 19:40, Daniel Lezcano wrote:
>
> Hi Marek,
>
> thanks for reporting
>
> On 23/09/2022 16:09, Marek Szyprowski wrote:
>
> [ ... ]
>
>> Exception stack(0xf082dfb0 to 0xf082dff8)
>>
>> [deadlock]
>>
>> Something is wrong in locking in the functions from the above 
>> stacktrace.
>
> Are you sure this deadlock is coming from this patch? Does a revert of 
> this patch solve the issue ?
>
Ups, my fault. It looks that I've copied SHA from the wrong window while 
preparing the report. The bisection pointed to the 78ffa3e58d93 
("thermal/core: Add a generic thermal_zone_get_trip() function") commit 
and I've already found how to fix the deadlock. I will report it again 
under the proper patch.


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 12/30] thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/thermal/uniphier_thermal.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
index 4111d99ef50e..277ae300c5b1 100644
--- a/drivers/thermal/uniphier_thermal.c
+++ b/drivers/thermal/uniphier_thermal.c
@@ -248,8 +248,7 @@ static int uniphier_tm_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	struct device_node *parent;
 	struct uniphier_tm_dev *tdev;
-	const struct thermal_trip *trips;
-	int i, ret, irq, ntrips, crit_temp = INT_MAX;
+	int i, ret, irq, crit_temp = INT_MAX;
 
 	tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL);
 	if (!tdev)
@@ -296,20 +295,18 @@ static int uniphier_tm_probe(struct platform_device *pdev)
 		return PTR_ERR(tdev->tz_dev);
 	}
 
-	/* get trip points */
-	trips = of_thermal_get_trip_points(tdev->tz_dev);
-	ntrips = of_thermal_get_ntrips(tdev->tz_dev);
-	if (ntrips > ALERT_CH_NUM) {
-		dev_err(dev, "thermal zone has too many trips\n");
-		return -E2BIG;
-	}
-
 	/* set alert temperatures */
-	for (i = 0; i < ntrips; i++) {
-		if (trips[i].type == THERMAL_TRIP_CRITICAL &&
-		    trips[i].temperature < crit_temp)
-			crit_temp = trips[i].temperature;
-		uniphier_tm_set_alert(tdev, i, trips[i].temperature);
+	for (i = 0; i < thermal_zone_get_num_trips(tdev->tz_dev); i++) {
+		struct thermal_trip trip;
+
+		ret = thermal_zone_get_trip(tdev->tz_dev, i, &trip);
+		if (ret)
+			return ret;
+
+		if (trip.type == THERMAL_TRIP_CRITICAL &&
+		    trip.temperature < crit_temp)
+			crit_temp = trip.temperature;
+		uniphier_tm_set_alert(tdev, i, trip.temperature);
 		tdev->alert_en[i] = true;
 	}
 	if (crit_temp > CRITICAL_TEMP_LIMIT) {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 22/30] thermal/drivers/imx: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/imx_thermal.c | 72 +++++++++++++----------------------
 1 file changed, 27 insertions(+), 45 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 16663373b682..fb0d5cab70af 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -76,7 +76,6 @@
 enum imx_thermal_trip {
 	IMX_TRIP_PASSIVE,
 	IMX_TRIP_CRITICAL,
-	IMX_TRIP_NUM,
 };
 
 #define IMX_POLLING_DELAY		2000 /* millisecond */
@@ -115,6 +114,11 @@ struct thermal_soc_data {
 	u32 low_alarm_shift;
 };
 
+static struct thermal_trip trips[] = {
+	[IMX_TRIP_PASSIVE]  = { .type = THERMAL_TRIP_PASSIVE  },
+	[IMX_TRIP_CRITICAL] = { .type = THERMAL_TRIP_CRITICAL },
+};
+
 static struct thermal_soc_data thermal_imx6q_data = {
 	.version = TEMPMON_IMX6Q,
 
@@ -201,8 +205,6 @@ struct imx_thermal_data {
 	struct thermal_cooling_device *cdev;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_init_calib() */
-	int temp_passive;
-	int temp_critical;
 	int temp_max;
 	int alarm_temp;
 	int last_temp;
@@ -279,12 +281,12 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
 	if (data->socdata->version == TEMPMON_IMX6Q) {
-		if (data->alarm_temp == data->temp_passive &&
-			*temp >= data->temp_passive)
-			imx_set_alarm_temp(data, data->temp_critical);
-		if (data->alarm_temp == data->temp_critical &&
-			*temp < data->temp_passive) {
-			imx_set_alarm_temp(data, data->temp_passive);
+		if (data->alarm_temp == trips[IMX_TRIP_PASSIVE].temperature &&
+			*temp >= trips[IMX_TRIP_PASSIVE].temperature)
+			imx_set_alarm_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
+		if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature &&
+			*temp < trips[IMX_TRIP_PASSIVE].temperature) {
+			imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 			dev_dbg(&tz->device, "thermal alarm off: T < %d\n",
 				data->alarm_temp / 1000);
 		}
@@ -330,29 +332,10 @@ static int imx_change_mode(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
-			     enum thermal_trip_type *type)
-{
-	*type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
-					     THERMAL_TRIP_CRITICAL;
-	return 0;
-}
-
 static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct imx_thermal_data *data = tz->devdata;
-
-	*temp = data->temp_critical;
-	return 0;
-}
-
-static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
-			     int *temp)
-{
-	struct imx_thermal_data *data = tz->devdata;
+	*temp = trips[IMX_TRIP_CRITICAL].temperature;
 
-	*temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
-					     data->temp_critical;
 	return 0;
 }
 
@@ -371,10 +354,10 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
 		return -EPERM;
 
 	/* do not allow passive to be set higher than critical */
-	if (temp < 0 || temp > data->temp_critical)
+	if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
 		return -EINVAL;
 
-	data->temp_passive = temp;
+	trips[IMX_TRIP_PASSIVE].temperature = temp;
 
 	imx_set_alarm_temp(data, temp);
 
@@ -423,8 +406,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
 	.change_mode = imx_change_mode,
-	.get_trip_type = imx_get_trip_type,
-	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
 	.set_trip_temp = imx_set_trip_temp,
 };
@@ -507,8 +488,8 @@ static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
 	 * Set the critical trip point at 5 °C under max
 	 * Set the passive trip point at 10 °C under max (changeable via sysfs)
 	 */
-	data->temp_critical = data->temp_max - (1000 * 5);
-	data->temp_passive = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_PASSIVE].temperature = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_CRITICAL].temperature = data->temp_max - (1000 * 5);
 }
 
 static int imx_init_from_tempmon_data(struct platform_device *pdev)
@@ -743,12 +724,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		goto legacy_cleanup;
 	}
 
-	data->tz = thermal_zone_device_register("imx_thermal_zone",
-						IMX_TRIP_NUM,
-						BIT(IMX_TRIP_PASSIVE), data,
-						&imx_tz_ops, NULL,
-						IMX_PASSIVE_DELAY,
-						IMX_POLLING_DELAY);
+	data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
+							   trips,
+							   ARRAY_SIZE(trips),
+							   BIT(IMX_TRIP_PASSIVE), data,
+							   &imx_tz_ops, NULL,
+							   IMX_PASSIVE_DELAY,
+							   IMX_POLLING_DELAY);
 	if (IS_ERR(data->tz)) {
 		ret = PTR_ERR(data->tz);
 		dev_err(&pdev->dev,
@@ -758,8 +740,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
 		 " critical:%dC passive:%dC\n", data->temp_grade,
-		 data->temp_max / 1000, data->temp_critical / 1000,
-		 data->temp_passive / 1000);
+		 data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
+		 trips[IMX_TRIP_PASSIVE].temperature / 1000);
 
 	/* Enable measurements at ~ 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
@@ -767,10 +749,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
 		     measure_freq << data->socdata->measure_freq_shift);
-	imx_set_alarm_temp(data, data->temp_passive);
+	imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 
 	if (data->socdata->version == TEMPMON_IMX6SX)
-		imx_set_panic_temp(data, data->temp_critical);
+		imx_set_panic_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
 
 	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
 		     data->socdata->power_down_mask);
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 24/30] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 2c67841a1115..5485e59d03a9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
+#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define BCM2835_TS_TSENSCTL			0x00
@@ -224,7 +225,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 	 */
 	val = readl(data->regs + BCM2835_TS_TSENSCTL);
 	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-		int trip_temp, offset, slope;
+		struct thermal_trip trip;
+		int offset, slope;
 
 		slope = thermal_zone_get_slope(tz);
 		offset = thermal_zone_get_offset(tz);
@@ -232,7 +234,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		 * For now we deal only with critical, otherwise
 		 * would need to iterate
 		 */
-		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
+		err = thermal_zone_get_trip(tz, 0, &trip);
 		if (err < 0) {
 			dev_err(&pdev->dev,
 				"Not able to read trip_temp: %d\n",
@@ -249,7 +251,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
 
 		/*  trip_adc value from info */
-		val |= bcm2835_thermal_temp2adc(trip_temp,
+		val |= bcm2835_thermal_temp2adc(trip.temperature,
 						offset,
 						slope)
 			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel