From: MD Danish Anwar <danishanwar@ti.com>
To: "Andrew F. Davis" <afd@ti.com>, Suman Anna <s-anna@ti.com>,
Roger Quadros <rogerq@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
MD Danish Anwar <danishanwar@ti.com>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>,
Nishanth Menon <nm@ti.com>
Cc: <linux-remoteproc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<srk@ti.com>, <devicetree@vger.kernel.org>,
<netdev@vger.kernel.org>
Subject: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
Date: Mon, 13 Mar 2023 16:41:26 +0530 [thread overview]
Message-ID: <20230313111127.1229187-5-danishanwar@ti.com> (raw)
In-Reply-To: <20230313111127.1229187-1-danishanwar@ti.com>
From: Suman Anna <s-anna@ti.com>
The PRUSS CFG module is represented as a syscon node and is currently
managed by the PRUSS platform driver. Add easy accessor functions to set
GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
to enable the PRUSS Ethernet usecase. These functions reuse the generic
pruss_cfg_update() API function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
drivers/soc/ti/pruss.c | 60 ++++++++++++++++++++++++++++++++
include/linux/remoteproc/pruss.h | 22 ++++++++++++
2 files changed, 82 insertions(+)
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 26d8129b515c..2f04b7922ddb 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -203,6 +203,66 @@ static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
}
+/**
+ * pruss_cfg_gpimode() - set the GPI mode of the PRU
+ * @pruss: the pruss instance handle
+ * @pru_id: id of the PRU core within the PRUSS
+ * @mode: GPI mode to set
+ *
+ * Sets the GPI mode for a given PRU by programming the
+ * corresponding PRUSS_CFG_GPCFGx register
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode)
+{
+ if (pru_id < 0 || pru_id >= PRUSS_NUM_PRUS)
+ return -EINVAL;
+
+ if (mode < 0 || mode > PRUSS_GPI_MODE_MAX)
+ return -EINVAL;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
+ PRUSS_GPCFG_PRU_GPI_MODE_MASK,
+ mode << PRUSS_GPCFG_PRU_GPI_MODE_SHIFT);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_gpimode);
+
+/**
+ * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
+ * @pruss: the pruss instance
+ * @enable: enable/disable
+ *
+ * Enable/disable the MII RT Events for the PRUSS.
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+ u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
+ PRUSS_MII_RT_EVENT_EN, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_miirt_enable);
+
+/**
+ * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
+ * @pruss: the pruss instance
+ * @enable: enable/disable
+ * @mask: Mask for PRU / RTU
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable, u32 mask)
+{
+ u32 set = enable ? mask : 0;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_SPP, mask, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_xfr_enable);
+
static void pruss_of_free_clk_provider(void *data)
{
struct device_node *clk_mux_np = data;
diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
index 12ef10b9fe9a..51a3eedd2be6 100644
--- a/include/linux/remoteproc/pruss.h
+++ b/include/linux/remoteproc/pruss.h
@@ -101,6 +101,7 @@ enum pruss_gpi_mode {
PRUSS_GPI_MODE_PARALLEL,
PRUSS_GPI_MODE_28BIT_SHIFT,
PRUSS_GPI_MODE_MII,
+ PRUSS_GPI_MODE_MAX,
};
/**
@@ -165,6 +166,10 @@ int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
struct pruss_mem_region *region);
int pruss_release_mem_region(struct pruss *pruss,
struct pruss_mem_region *region);
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode);
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable);
+int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable, u32 mask);
#else
@@ -188,6 +193,23 @@ static inline int pruss_release_mem_region(struct pruss *pruss,
return -EOPNOTSUPP;
}
+static inline int pruss_cfg_gpimode(struct pruss *pruss,
+ enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable, u32 mask)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
#endif /* CONFIG_TI_PRUSS */
#if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-13 11:13 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 11:11 [PATCH v4 0/5] Introduce PRU platform consumer API MD Danish Anwar
2023-03-13 11:11 ` [PATCH v4 1/5] soc: ti: pruss: Add pruss_get()/put() API MD Danish Anwar
2023-03-13 16:19 ` Andrew Davis
2023-03-13 11:11 ` [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API MD Danish Anwar
2023-03-17 8:56 ` Roger Quadros
2023-03-20 5:11 ` [EXTERNAL] " Md Danish Anwar
2023-03-20 16:18 ` Andrew Davis
2023-03-21 5:23 ` Md Danish Anwar
2023-03-21 9:24 ` Roger Quadros
2023-03-21 9:48 ` [EXTERNAL] " Md Danish Anwar
2023-03-21 10:23 ` Roger Quadros
2023-03-21 10:45 ` Md Danish Anwar
2023-03-13 11:11 ` [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API MD Danish Anwar
2023-03-15 12:07 ` Roger Quadros
2023-03-16 11:08 ` [EXTERNAL] " Md Danish Anwar
2023-03-16 11:29 ` Md Danish Anwar
2023-03-16 11:32 ` Roger Quadros
2023-03-16 11:34 ` [EXTERNAL] " Md Danish Anwar
2023-03-13 11:11 ` MD Danish Anwar [this message]
2023-03-15 12:22 ` [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR Roger Quadros
2023-03-16 11:05 ` [EXTERNAL] " Md Danish Anwar
2023-03-16 11:36 ` Roger Quadros
2023-03-16 11:44 ` Md Danish Anwar
2023-03-16 12:19 ` Roger Quadros
2023-03-16 13:11 ` [EXTERNAL] " Md Danish Anwar
2023-03-16 14:04 ` Roger Quadros
2023-03-17 5:02 ` [EXTERNAL] " Md Danish Anwar
2023-03-17 8:31 ` Roger Quadros
2023-03-17 8:55 ` [EXTERNAL] " Md Danish Anwar
2023-03-13 11:11 ` [PATCH v4 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX MD Danish Anwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313111127.1229187-5-danishanwar@ti.com \
--to=danishanwar@ti.com \
--cc=afd@ti.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=nm@ti.com \
--cc=rogerq@kernel.org \
--cc=s-anna@ti.com \
--cc=srk@ti.com \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).